Tender for Prov SOP for the Scheme Augmentation of WSS Dhar Kandloo, WSS Sans, WSS Baju Babi, WSS Mashog Kotlu in Grid MS in District Mandi (HP) Under Electrical Sub Division Churag.

Erection Charges

Digging of Pit for 2 Nos Poles,Drilling of Holes In X Arms,Preparation of Platform Structure,Erection of D Pole,Concreting 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size),Erection of Platform,Erection of X0Arms, Drop0Out,,Erection of 2 Nos Stay Set,Erection of Jumper ,Earthing for 3 Nos Earths ,Providing Earthing Conn. To G.O Switch, Lightning Arrestor Etc.& Poles,Prividing earthting to the Transformer, LT Box, Meter Box etc,Barbed Wire & Painting,Erection of 63kVA Transformer, LT Box, MCCB Switch, Cable, service Cable and Energy Meter complete in all respect

Manual Carriage Of Material For 63 KVA SUB-STATION Considering Average Distance From Road To Site Of Work (Avr.Lead =0.200 KM)

Supply Part of Sub Station

Distribution Transformer (Ordinary), 22/0.4 kV, 63KVA

Muffs (2000mm) with concerete filling

X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incommer line

MS Angle Iron (50X50x6 mm), Length: 2800 x1 Nos for LA's

X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch

Transformer Bed, Belting & Knee Bracing

X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed

X-Arm [Channel Iron (100x50x6 mm), Length : (460 mm) x 2 Nos for supporting Main Channel of Transformer]

MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos

MS Angle Iron (35X35x5 mm), Length : 460 x 2 Nos

MS Angle Iron (50X50x6 mm), Length : 950 mm x 2 Nos for Bed Knee Bracing

Transformer LT Dist Box and GO Switch fixing Assembly

MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos

MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos

GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm

GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type

D.O Fuse Unit

Surge Arrester, 9 kV Station Class (Porcelain Type)

Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.)

Stay set complete

Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set)

Pipe Earthing Set

6 SWG GI wire For Earthing

LT Distribution Panel Box with MCCB(100A, 25 kA, 4P)

Half Clamp (M.S. Flat 50X6 mm)

Full Clamps (M.S. Flat 50X6 mm)

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Aluminium Thimble

Copper Thimble 200 Amp

Danger Plate

Barbed Wire

LT Cable (3.5 Core) 70mm²

Energy Meter (3-Phase, 4-Wire) DLMS compliant 100/5A CT Type for 63KVA Transformer

Aluminium Paint.

Red Oxide

Chain Link fencing , Angle Iron ,Gate etc for transformer fencing(Ref Civil Work at Pg No

Erection part of HT Line

Manual Carriage Of Material For HT Line Considering Average Distance From Road To Site Of Work (Avr.Lead =0.200)i.e Total Span =0.270x0.200=0.054)

Survey Of 1 Km Line

Erection Charges Of Single Pole:-Digging Of Pit,Erection Of Pole,Filling Of Pit+Ramming,Drilling Of Holes X-Arm,Fixing Of Insulator, X-Arm,Knee Bracing Set, Top Clamp,Fixing Of Barbed Wire,Danger Plate,Painting Of Pole,complete in all respect

Erection Charges Of ACSR/AAAC 30MM2:-1KM SINGLE ACSR/AAAC 30MM2 .Laying Of Conductor.,Stringing & Sagging,Binding With Insulator complete in all respect

Erection Of Double Pole:-Digging Of Pit,Erection Of Pole,Filling Of Pit+Ramming,Drilling Of Holes X-Arm,Fixing Of Insulator, X-Arm,Knee Bracing Set, Top Clamp,Fixing Of Barbed Wire,Danger Plate,Painting Of Pole,complete in all respect

Erection Charges Of Stay Set:-Digging Of Pit,Fixing Of Stay Rod,Filling Of Pit,Nozzeling & Tighting complete in all respect

Erection Charges Of Earthing set :-Digging Of Pit,Fixing Of GI Wire To The Earth System,Filling Of Pit complete in all respect

Erection Charges Of GI Earth Wire:-AAAC 20 MM2 / AAC 25 MM2,Laying Of Conductor,Stringing & SaggingBinding With Insulator,complete in all respect

Fixing Of Jumper

Erection Of X-Arms, Drop-Out,GO Switch

Supply part of HT Line

ACSR 6/1/2.59 (30mm²) {Includes 3 conductor lengths for 3Φ and Additional 1% (Sag, Jumpering and wastage}

Muffs (2000mm) with concerete filling

Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/c tolerance of 100 mm either side) x 8 structure

Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures

Pole Top Bracket [MSCI:100x50x6 mm- 100 mm]

22 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure

Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No.

X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No.

X-Arm (Horizontal) - MS Channel Iron C type: 100X50x6, Length:2800mm x 2 No.] i/c tolerance of 100 mm either side) x 8 structure

Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps, Straight stapples & Bend Stapples etc.) x (3 No. conductors) x (2 No. sides)

22 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure

Stay set complete in all respect (i/c Stay Clamp) (1No. / Single Pole , 4 No. / Double Pole Structures)

Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set)

HT Earthing set complete

Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 3% (Sag, Earthing, Cross lacing above road and wastage)} @ 0.102 kg/m

Eye Hook for earth wire

MS Angle Iron: 50x50x6, Length : 2800 mm for Road crossing

GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm

GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type

D.O Fuse Unit

Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro' structure: 2 No ]

Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro' structure: 2 No]

Danger Plate (250X200X1.6 mm)

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Barbed Wire

Red Oxide

Aluminium Paint

Erection Part of LT Line

Manual Carriage Of Material For 3 Phase LT Line Considering Average Distance From Road To Site Of Work (Avr.Lead =0.200 KM)i.e 0.200X 0.060=0.012 KM)

Erection Of Steel Pole:-Digging Of Pit,Drilling Of Holes In Pole X-Arm,Erection Of Pole,Erec. Of X-Arm ,Shackle Insulator,Filling Of Pit And Ramming,complete in all respect

Erection Charges Of ACSR/AAAC 50 MM2:- .Laying Of Conductor.,Stringing & Sagging,Binding With Insulator complete in all respect

Erection Charges Of Stay Set:-Digging Of Pit,Fixing Of Stay Rod,Filling Of Pit,Nozzeling & Tighting complete in all respect

Erection Charges Of Earthing set :-Digging Of Pit,Fixing Of GI Wire To The Earth System,Filling Of Pit complete in all respect

Erection Charges Of GI Earth Wire:-AAAC 20 MM2 / AAC 25 MM2,Laying Of Conductor,Stringing & SaggingBinding With Insulator,complete in all respect

Supply part of LT Line

ACSR 6/1/3.35 (50mm²) { 3% (Sag, Jumpering and wastage}

Muffs (2000mm) with concerete filling

Channel Iron (75x40x5) [Length- 1.50 Mtr + 0.2 Mtr]

Shackle Insulator (16 kN)

D-Iron (U- Clamps) with nut and bolts

Earth Knob

LT Stay Set (i/c Stay clamp)

Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set)

Full Clamps ( 1 No for Stay Set)

Half Clamp for X-arm

Earthing Set complete

Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 3%} for 3%Sag, Wastage & Cross Lacing @ 0.102 kg/m

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Aluminium Paint

Red Oxide

Spiral PVC Spacer

Koyla Engineering Works (BID ID -500534)

VISHAL ELECTRICAL GOVT CONT (BID ID -500981)