Construction, Testing and Commissioning of Dhanpur Ghashi MVS Water Supply Scheme with Rising main, Distribution Main and Distribution Pipe Line, Repairing of OHT and Tube Well, Pump House and FHTC etc. at Ramnagar Block District Nainital

Rates for Construction, Testing & Commissioning of DhanpurGhashi MVS Water Supply Scheme with Rising main, Distribution Main & Distribution Pipe Line, Repairing of OHT & Tube Well, Pump House & FHTC etc. at Ramnagar Block District Nainital.

REPAIRING OF OVER HEAD TANK.(Radius 5.00m Tank Height 6.40m OHT Height 18.0m) Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge decketc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm.The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shallcarry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm

For horizontal surface one coat @1.10 kg per sqm

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to removepre-existing paint film & loose particles till plaster is visible, completein all respect as per the direction of Engineer-in-Charge

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerincharge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Removing dry or oil bound distemper, water proofing cement paintand the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

12 mm cement plaster finished with a floating coat of neat cement of,mix :1:4 (1 cement: 4 coarse sand)

Supply & applying of water based bio-degradable epoxy polymide chemical on MS flange for repairing of water leakage including all labour material T&P etc. complete as per direction of Engineer-in- Charge. Rrpair OHT column pipe joints with pipe joints sealentsupto 0 to 10 feet height

Rrpair OHT column pipe joints with pipe joints sealentsupto 10 to 20 feet height

Rrpair OHT column pipe joints with pipe joints sealentsupto 20 to 30 feet height

Rrpair OHT column pipe joints with pipe joints sealentsupto 30 to 40 feet height

Rrpair OHT column pipe joints with pipe joints sealentsupto 40 to 50 feet height

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supply and installation of Water level indicator (II level) including one set of sensor with its holding parts, 54 meter sensor cable armued with steel wire.

SUBMERSIBLE PUMPING PLANT AND ACCESSORIES FOR TUBEWELL

Submersible pump set of 800 LPM, 120Mt. head suitable for 300mm dia Assembly operating at 3 phase 50Hz AC supply

S/o Control panel cum ATS starter complete with accessories suitable for 52.0 H.P.

S/o Submersible copper cable size 35 sq.mm.

S/o Main piping and valve with allaccessories of 150mm size i.e. sluice valve 2 Nos., reflex valve 1No., Tee 1No., Bend D/F pipes and 150mm dia M.S. column pipe with top pipe in 3mt. Length, complete with interlocking arrangement 20Mt

S/o Pressure gauge with fitting.

S/o Chain pulley block of 10.0Tonne capacity 4 Mt. lift spur gear tested on 14.5Ton load.

Chemical earthing material for 52.0 HP pumping plant including earth electrode, aluminium earth strip etc as per latest I.E. rules.

S/o Main Switch 300 Amp

S/o Rubber Insulation sheet 1 Mt.x2 Mt.x .025Mt.

S/o 100 KVA fully automatic Servo Control Voltage Stabilizer suitable for regulating incoming voltage 320 to 480Volt , outgoing voltage 415Volt with change over switch and 3Core copper cable

Supply and fixing of Electronic type dosing system complete with solenoid coil actuated pulsar circuit, diaphragm & electronically pulp capable of delivery max, 4LPH at 5.5kg./cm2 pressure operated 220Volt single phase A.C. Supply along with chemical injection device and 100Ltrs capacity of media tank complete with accessories

Liquid Chlorine required for six month maintenance

S/o Chlorine Testing Kit

Spare for switch gear.

Supply of Special tools and spanners with 2 Nos. chain wrench

Installation, Commissioning & Testing of pumping plant and all accessories

Erection, testing and commissioining and modification of starter with AC and DC

Internal & external Electrification of Pump house.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.-Group A

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

MAINS & SUBMAINS-Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

REPAIRING & PAINTING WORK OF OLD PUMP HOUSE BUILDING AT OVER HEAD CAMPUS.

Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge In cement mortar (15.7.4)

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): From brick work in cement mortar (15.8.3)

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix 1:6 (1 cement : 6 fine sand) (13.1.2)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws(9.21.2)

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :150x10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessaryscrews etc. complete :100 mm (9.66.2)

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete.

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work

Deduction Old Brick

DISTRIBUTION SYSTEM:-

Providing, Supply and Carting from site store to site of work, Laying & Jointing of G.I. screwed pipes (including cost of all jointing materials like specials, white lead, hemp and oil etc.) in trenches with its cutting, threading and testing of pipe line etc complete. (G.I. Pipe Medium Quality IS: 1239) 50mm

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :- Above 40 mm nominal bore

Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer in charge and Reinstatement of following type of roadsurface for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials. - forbituminous road

Dismantling and reinstatement of following type of road surface for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials. C.C. Road (0.60 m x 1951 m )

Reinstatement of following type of road surface for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials. Bituminous Road (0.60m x 1614 m length

Kaccha Patri (0.60 m x 3280 m length

Excavation in Ordinary Soil (loams, clay, sand) for foundation including lift up to 1.5 m and lead up to 30 m filling, watering and ramming of Excavated the earth into the trenches or into the sides between foundation trenches or into the plinth and removal. (14137 X 0.6 X 0.75)

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 x160x180 with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. For different types of valves.

Constructing masonry Chamber for Air valve with a floating coat of neat cement complete as per standard design :With F.P.S. bricks

Electromagnetic flow meters (for Bulk pipe lines) Type :Remote mounted display Flange end 125 mm.

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc.(The tail pieces if required will be paid separately) :- 100 mm diameter (Class II)

Providing, Supplying and fixing of D/F DI Pressure Reducing Valve in pipe line including jointing etc. complete as per standard/ technical specification) :- 100 mm diameter

80 mm diameter

House Service Connection FHTC.

Excavation in Ordinary Soil (loams, clay, sand) for foundation including lift up to 1.5 m and lead up to 30 m filling, watering and ramming of Excavated the earth into the trenches or into the sides between foundation trenches or into the plinth and removal. Excavation =12.00x0.60x0.60=4.32 Cum

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete. G.I. PIPE CONFORMING TO IS : 1239(PART- 1) Medium Duty (Class 'B') 15 mm dia

Providing & fixing brass ferrule with C.I. mouth cover including boring and tapping the main :15 mm nominal bore

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of G.M. ferrule including tapping the main, but excluding the cost of earth work and cost of all materials.

Shifting of Connection

Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with backfilling, watering, ramming of excavated earth in the trenches

Providing,Supply and Carting , laying jointing (including cost of jointing materials like white lead, hemp and oil etc.) fixing and testing of M.S. galvanised screwed and socketed pipes (Medium quality)as per IS 1239(part-1)/2004 , specials and fittings, including cutting etc. complete. - For 15 mm pipe

Making connection with the existing G.I. pipe line of following dia including local cartage of required to site of work, cutting & threading of pipe, bailing out of water, making connection properly with fitting of specials, testing of joints, back filling, cleaning of site completly and returning of scrap material to local store but excluding cost of pipe and specials. - (15-25mm)

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main

Specials G.I. Union 15mm

Nipple 15mm

Support structure for strouthering of FHTC Connections By using Brick Work with Plastering or by using PVC pipe 80mm dia filled with concrete as per direction of Engineer in charge

DUTY ROOM REPAIRING WORK WITH TOILET & STORE SIZE-3.0MX2.50M:-Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angles 40x40x6 mm for diagonal braces.

Provide 15 mm thick plaster in 1:4 cement and sand mortar (Rough &.plain both sides)

Provide acrylic smooth exterior paint (two or more coats) to give an even shade.

Painting on doors and windows (two or more coats) over and including one priming coat

Supply and fixing of 4mm thick plane glass panes on window's including supply of nails and putty etc all complete

Sanitary Items:--Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap

Providing and fixing G.I. pipes complete with G.I. fittings and clamps/c cutting and making good the walls etc. Internal work. 15 mm dia nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore

Supply and fixing of PVC pipes for waste water and sewer pipes. 75 mm diameter

110 mm diameter

CARTAGE OF MATERIALS (RAISING MAIN & DISTRIBUTION SYSTEM)

Pipes. Cartage of G.I. Pipe, Specials and valves from Kathgodam rail head to the site of work by truck from to nearest road head.By Pucca road & Head load

JSB Enterprises