CERTAIN B/R WKS TO VARIOUS BLDGS AND IN MES INSTALLATIONS UNDER AGE BR-I OF GE ARMY BHUJ AT MIL STN BHUJ

Amount

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

Taking down cement plaster on brick work or stone walls, etc including wall tiles, raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of pre-cast concrete block masonry built in cement mortar of any description in any position complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

M&L Virified Ceramic tiles Dark shade 8 to 9 mm thick (square/rectangular) polished/Matt/Glossy, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in epoxy grout and including tile adhesive chemical backing coat complete all as spcified and directed.

All as above but on vertical surface as in skirting/Dados over 10 mm thick plaster cm 1:4 complete all as specified and directed.

M&L for vitrified tiles Fullbody 8 mm thick, Light shade (square/rectangular) polished/Matt/Glossy, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified.

M&L for vitrified tiles Fullbody 8 mm thick, Light shade (square/rectangular) polished/Matt/Glossy on vertical surfaces such as skirtings, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10 mm thick rendering in cement mortar 1:3 complete all as specified.

M & L for glazed coloured white tiles of size 450x300x 7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with white cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified..

Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as spcified and directed.

M&L Durastone / Endura heavy duty vitrified tiles not less than 12mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.16 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

S&F for 35 mm thick 2nd class hardwood glazed and skeleton shutters , open rebated and prepared to receive glass, guaze, etc. edges of framing plain chamfered or rounded fitted with cut and metered beads for securing glass etc . sizes of members of shutters as specified in SSR-I , section-8, clause-8.24(a); supplied and fitted to chowkats complete all as specified and directed.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet with MS square tube all as per specifications and as per drawing shown on sl page No 150 of SSR part II (for item-884) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelam both side colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of prelam colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading., supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

S&F 30 mm thick flush shutters,solid core construction,with partical board core and covered with decorative face veneer with lipping/frame to match on both sides complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Co mposite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp-ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category withproperty of being termite/borer proof,water/ moisture proof and fire retardant.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgen polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F 100 mm stainless steel extruded (ISI Marked ) butt hinges complete all as specified and directed.

S&F for 75mm stainless steel extruded (ISI Marked ) butt hinges complete all as specified and directed.

S&F for 150mm size aluminium anodised, barrel tower bolts, of extruded section and fixed complete all as specified and directed.

S&F for 100mm size aluminium anodised, barrel tower bolts, of extruded section and fixed complete all as specified and directed.

S&F for 150mm size Handles extruded aluminium alloy handles,fabricated type anodised complete all as specified and directed.

S&F for 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for 4 mm thick Plain sheet glass, ordinary quality and glazing with oil putty/ beading in square exc. 0.5 sqm in each pane complete all as specified and directed.

S&F for Galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm, complete all as specified and directed.

S&F for 4 mm thick figured glass, pin headed type and glazing with oil putty/beading in squares n exc 0.5 sqm in each pane, complete all as specified.

Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

M&L for PCC type B1, 1:2:4 (using 20mm graded stone aggregate) as in hold fasts/ bed blocks/ coping etc complete all as specified and directed.

S&F for Galvanised stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S&F in repair Galvanised stainless steell wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

M&L for 15mm thick rendering on fair faces to brick work or stone masonry surface in CM 1:6 finished the surface even and smooth (without using extra cement on internal wall surface complete all as specified and directed.

M&L for 15mm thick rendering on fair faces to brick work or Block masonry surface in CM 1:4 finished the surface even and smooth (without using extra cement on internal wall surface complete all as specified and directed.

Peparation of new plastered or unplastered surfaces of walls and applying two coats of Oil bond distemper, white or tinted, over 2mm coat wall putty complete all as specified and directed.

Peparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted complete all as specified and directed.

Prepartion of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Preparation of new galvanised steel surfaces of any description not otherwie described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over a coating of mordant solution including washing the surfaces complete all as specified and directed.

Dismantling Prelaminated particle boarding, any description, fixed in any position with screws complete all as specified and directed.

S&F Solid in repair PVC wall lining consisting of 5mm thick plain single colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications as specifed and directed

M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cub board shutters/selves and the like, etc. complete all as specified and directed.

S&F for 75 mm hasp and staple, safty type, aluminium anodised with mild steel hinge pin incl bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F for continuous (piano) hinges, mild steel, bright finish or electrogavanised, width of flaps (when open) 40mm complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 500 litres capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete incl Dismantling water tanks and all as specified in SSR Part-I, making connections including 20mm bore ball valve brass with polyethylene float and fly nut and dismantling existing water tank of any capacity and removing from site complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 1000 litres capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete incl Dismantling water tanks and all as specified in SSR Part-I, making connections including 20mm bore ball valve brass with polyethylene float and fly nut and dismantling existing water tank of any capacity and removing from site complete all as specified and directed.

S&F in repair for vitreous china squatting pan, 'orissa' pattern, size 580 x 440 mm white , with integral foot rests (excluding flushing cistern and flushing pipe), including connection to trap and to flushing pipe, anti-syphonage pipe, etc, complete including making good to floo complete all as specified and directed.

S&F in repair for 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia. PVC flushing pipe, PVC connection 15 mm size with PTMT nuts of length 450 mm and with CP brass coupling & PVC washer at both ends, complete all as specified complete all as specified and directed.

S&F in repair for Vitreous china wash basin, white, flat back, size 550 X 400mm excluding taps, waste, chain and plug and pocelain stopper but incl brackets, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F in repair waste coupling 32mm CP for glazed ware sinks, basins etc with long screwed sha k or fly nuts, flanged end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repair Stainless steel curtain rods 25mm dia fancy type with required supports, and open/end brackets complete all as specified and directed.

S&F in repair for Pillar tap for 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwd down high pressure, with or withou lettered 'hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipes.Make-Prayag/Cera/Kohler

S&F in repair for bib cock CP for 15mm bore fancy type, cast copper alloy, screwed down, screwed for iron pipe or brass ferrule Make-Prayag/Cera/Kohler complete all as specified and directed.

S&F in repair for CP Stop cock / angle volve 15 mm cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions, 15mm bore fancy type.Make-Prayag/Cera/Kohler complete all as specified and directed.

S&F in repair for PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair for ball brass valves, size 15 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. Make Prayag/Polytuff/Pearl

S&F in repair Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe complete all as specified and directed.

S&F in repair Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 25 mm bore pipe, screwed for iron pipe complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) Nahani trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F (concealed / open)20 mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore complete all as specified and directed.

S&F (concealed / open) 25mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore complete all as specified and directed.

S&F (concealed / open) 40 mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge thickness including Nanital or similar pattern roof covering complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for false ceiling work of galvenised MS ceiling grid system 'UNLOCK" comprising of main runner 38mmx24mmx0.35mm cross tee 38mmx24mmx0.25mm and GI suspenders 4mm dia fixed to ceiling with and including supply and fixing water proof laminated gypsum ceiling board of size 600x600x 8 mm thick complete all as specified and directed and fixed as per manufacturers instructions complete all as specified and directed.

Supply and Fix in repairs, seamless ceiling with using 12mm thick, factory made gypsum fiber board, fixed on GI frame work for seamless ceiling suitable for suspended system with and including applying two coats of oil bound distemper over a coat of primer to give even and smooth finish without showing any joints complete all as specified and directed.

S & F powder coated anodised Aluminium alloy sections sliding windows with frames 92 X29.6 X1.10mm , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note : Making all edges i.e. cill and jamb good by cement mortar 1:3

S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and directed.

S & F for anodised Aluminium partition/ door frame of size 100 x44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98mm thick, bottom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 x 44 x1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stopper, tower bolts 200mm, sliding door bolt 300mm or mortice lock with 5mm thick tinted glass /pre laminted particle board (Novapan) panel and making good to the disturbed wall surfaces to match existing surface complete all as specified and directed.

M & L powder coatedaluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm complete all as specified and directed.

S&F in repair brass 4 Levers Mortice lock, vertical type size 100 mm complete all as specified and directed.

M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair aluminium door coser hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000 mm in width complete all as specified and directed.

S&F in repairs tubular towel rail brass chromium plated, 20mm dia, D type 60 cm long between flanges complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size, with or without swivel joints, including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour, fixing to steel pipe or union complete all as specified and directed.

Disconnecting existing tanks, 250/ 500/1000 litres capacity, setting aside (or lowering if required) for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position and making connections with existing water supply line complete all as specified and directed.

M & L for water proofing treatment to roof slab by applying one coat of bituminous / polymrised primer confirming to IS 3384 @ 0.30 ltr /sqm and laying grit finish Actetic Polypropylene (APP) modified membrane pre-fabricated , reinforced with non woven polyester , of 3.50 kg/sqm (minimum) , 3mm thick minimum with minimum 75mm side overlaps and minimum 100mm end overlaps etc complete all as specified and directed..( NOTE ;- Taking down also include in this rate)

M&L Rendering 10 mm thick in CM(1:3) rendering on roof surfaces complete as all specified and directed.

M & L for PCC(1:2:4) as in levelling course on roof surfaces complete all as specified and directed.

Dismantilng wrought iron or mild steel work of any description not otherwise provided for all as specifed and directed

M&L Steel work in tubular trusses, Pillars including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1998 grde St-240 complete all as specified and directed.

M&L for framed brackets of angles or tees with web and franges cut to shape, drilled and countersunk for screw incl bending and welding angles, as necessary gusset plate plates, reviting etc 10 kg each brackets confirming to Fe 290 Gde E-165 complete all as specified and directed.

Dismantling of PVC drain pipes of internal dia 100mm jointed in cement mortar and taking out of treanches/fixed to wall complete all as specifed and directed.

Dismantling of PVC drain pipes of internal dia 75 mm jointed in cement mortar and taking out of treanches/fixed to wall complete all as specifed and directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall ceiling, floor etc 110mm bore of pipe (fixed in repair) complete all as specfied and directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall ceiling, floor etc 75 mm bore of pipe (fixed in repair) complete all as specfied and directed.

S&F PVC (SWR) bends of any radius for 110 mm bore pipe (fixed in repair) complete all as specifed and directed.

S&F PVC (SWR) bends of any radius for 75 mm bore pipe (fixed in repair) complete all as specifed and directed.

S&F PVC (SWR) branch pieces(single Y) equal or unequal of 110 mm bore and fixed complete all as specifed and directed.

S&F PVC (SWR) branch pieces(single Y) equal or unequal of 75 mm bore and fixed complete all as specifed and directed.

S&F PVC (SWR) branch pieces(Double Y) equal or unequal of 110 mm bore and fixed complete all as specifed and directed.

S&F PVC (SWR) branch pieces(Double Y) equal or unequal of 75 mm bore and fixed complete all as specifed and directed.

S&F PVC (SWR) junction single (single T) equal or unequal of 110 mm bore pipe and fixed complete all specifed and directed.

S&F PVC (SWR) junction single (single T) equal or unequal of 75 mm bore pipe and fixed complete all specifed and directed.

S&F PVC (SWR) junction single (double T) equal or unequal of 110 mm bore pipe and fixed complete all specifed and directed.

S&F PVC (SWR) junction single (double T) equal or unequal of 75 mm bore pipe and fixed complete all specifed and directed.

Taking down and refixing the same aluminium door shutter after resecuring/ readjusted to aluminium section weighing not less than 0.55 kg/m including necssary joining cleats,glazing clips,ruber neoprene packing, handle 2 Nos in Each door, hinges, anodised aluminium snap bidding, screw etc. and renew unserviceable items such as fittings, sections, glass, Solid PVC sheets etc complete all as specified and directed .

M&L for 18-20 mm thick granite (Jet Black) work (table rubbed and polished and moulding of outer edges) in steps, jambs and pillars, window cills, cooking platforms and the like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with grout shade of granite with and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

S&F in repair 15mm bore bib taps cast copper alloy, chromium plated fancy type ISI marked with crutch or butterfly handle screwed down screwed for iron pipe or for union and fixed complete all as specified and as directed (Make:Jaquar/Kohler/ Cera)

S&F in repair stainless steel grating 150 x150mm size over floor trap anti cockros all as approved sample all as specified and directed.

S & F of Corner Glass Shelf (with Bracket) CAT NO ACN-1173 JAGUAR or equivalent incl all fittings and accessories complete all as specified and directed.

M&L for welding in repairs n.exc. 2.5 cm in length and n.exc. 6mm thick, complete all as specified and directed.

M&L for preparation of old decorated surface and applying one coat of white wash on walls , complete all as specified and directed..

M&L for preparation of old decorated surface of ceiling and applying one coat of white wash on Ceiling complete all as specified and directed.

M & L for preparation of old decorated surface and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L existing treatment on walls and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed

M& L for preparation of old decorative surface of wall and applying one coat of acrylic weather proof paint (Exterior grade) Complete as all specified and directed.

M & L for existing treatment on walls and applying two coat of acrylic weather proof paint (Exterior grade) over a coat of primer complete all as specified and directed.

M& L of Preparation of old decorated surfaces and applying one coat of Terracota Paint on Floor and Wall Surfaces complete as all specified and directed.

M& L for applying Cement putty of 1-2 mm thickness over plastered surface to prepare the surface even and smooth complete as all specified and directed.

M&L for preparation of old plasteres/unplastered wall surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement base paint complete all as specified and directed.

M & L for existing treatment on walls and applying two coat of Royale Luxury Emulsion paint (Interior grade) over a coat of primer complete all as specified and directed.

M&L for prepartion of old wooden surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Preparation of old steel surfaces of any description not otherwie described, over 10 cm width or girth and applying one coats of synthetic enamel paint, complete all as specified.

M&L for plain cement concrete (1:2:4) type B-2, using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

S&F 18 mm thick prelaminated PVC Cheluka ply prelaminated one side with decorative choice lamination and other side plain fixed with screws to PVC celuka ply works complete all as specified and directed Make : Rajshree plasticwood

All as per Above item but 18 mm thick plain cheluka plywood

All as per Above item but 12 mm thick plain cheluka plywood

All as per Above item but 05 mm thick plain cheluka plywood

S&F in repair Kitchen basket stainless steel for Cup and saucer basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and directed

S&F in repair Kitchen basket stainless steel for Partition basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and directed

S&F in repair Kitchen basket stainless steel for Plain basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty ) of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and directed

S&F in repair Kitchen basket stainless steel for Dish(plate) basket size 430 x508x250 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and directed

S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed.

M & L for tank cleaning of PVC or RCC (1000 ltr) overhead water tank and mentioning date of cleaning by paint or marker etc ,all as specified and directed. Note:- It include material required like cloth ,chemical ,water to rinse etc

M & L for tank cleaning of pvc or rcc (500 ltr) overhead water tank and mentioning date of cleaning by paint or marker etc ,all as specified and directed. Note:- It include material required like cloth ,chemical ,water to rinse etc

S & F in repairs of Syphon Set in vitreous china Two Piece European Water Closet Flush tank incl all necessary accessories complete all as specified and directed

S&F Single Piece WC with PP Close Seat cover Hinges Dual Flush Cistern Fitting Fixing Accessories And Accessories set size 360x640x685 mm S Trap 110mm complete all as specified and directed (Make :Jaquar/Kohler/ Cera)

Supply and fix PVC bathroom cabinet of size 50cmx41cm with hinged door an locking arrangement with built in shelves and looking mirror fixed in cabinet door and fixed to wall as per manufacturers instruction as in repairs complete all as specified and directed. (Make : Jaquar/ Cera)

S&F in repair Chromium plated toilet Roll paper holder standared quality complete all as specified and directed. CA Part No:CAN-11151 N (Make : Jaquar)

S&F health foucet with 1200 mm long flexible mild steel tube with wall hook complete all as specified and as directed and approved.CA Part No: ALD 573(Make : Jaquar)

S&F Ceramic White Thin Rim Table Top Wash Hand Basin Rectangular shape of size 530mm X 420mm X 140 mm,CP waste coupling, PVC connection JDS-WHT-25907N complete all as specified and directed. (Make : Jaquar)

S&F Shower Panels Glassy- Black Size 1400 x 250 mm all complete all as specified and directed. CA Part No: SHP-BLK- ST86112 (Make : Jaquar)

S&F Single Lever Tall Boy with 150mm Extension Body fixed spout without popup Waste System with 600mm Long Braided Hoses complete all as specified and directed. CA Part No: opp-15005BPM (Make : Jaquar)

S&F Rimless Blind Installation wall Hung WC with UF soft slim seat cover Hinges Accessories set Size 345 x 495 x 365 mm complete all as specified and directed. CA Part No: ARS-WHT-39953BIUFSM (Make : Jaquar)

S&F Single piece Slim Concealed Cistern Body With Installation kit (without Flush Control Plate) complete all as specified and directed. CA Part No: JCS-2400 (Make :Jaquar)

M&L for 12 mm thick toughened glass as in partitions,glass doors,Windows all SS fiting required and work stations including all necessary chemicals S/S pivot and all S/S fiting and including sliding channel for door required making good selicon filling complete all as specified and directed. (Make : Saint Gobain)

S&F 15mm bore CP brass angular cock screwed for iron pipe or ferrule and fixed complete all as specified and directed.CA Part No: VGP81053 (Make : Jaquar)

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner with chromium plated bracket guard and with chromium plated bracket guard and railing 6" dia fixed with screws complete all as specified and directed. CA Part No : AKP-CHR-35771P (Make :Jaquar)

S&F in repair waste coupling 125 mm PVC for glazed ware sinks, basins etc with long screwed shak or fly nuts, flanged end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F Smart Mirror size 900 MM Dia glass thickness 5mm thick Light changing mode warm light, cool white, natural white complete all as specified and as directed.

S&F Smart Mirror size 750 MM Dia glass thickness 5mm thick Light changing mode warm light, cool white, natural white complete all as specified and as directed.

S&F Towel Rack Stainless steel 600 mm Long Towel Shelf with Lower Hangers complete all as specified and as directed.

S&F Towel Rack Stainless steel 450 mm Long Towel Shelf with Lower Hangers complete all as specified and as directed.

Treatment of wall :- Surface must be thoroghly cleaned, free of dust, grease etc and washed well with water. The surface to be checked for cracks, hollowness and loose plasterd areas etc if any. All loose plaser and cracks larger than 10 mm width to be repaired with polymer modified mortar using Dr fixit pidicrete URP. The cracks up to 5 mm to be treated with Dr fixit Crack- X Paste and the larger ones up to 10 mm width to be repaired with polymer modifed mortar using Dr Fixit pidicrete URP.The cracks up to 5mm treated with Dr Fixit Craack - X Paste and the lager ones up to 10mm with Dr fixit Crack- X shrikfree.

Priming :- After the proper surface preparation and curing of repaired area wash the surface well maintaining it in saturated dry condition proceed for priming using Dr Fixit primeseal diluted in 2:1 ratio with water ( 2 parts primeseal diluted with 1 part water) Maintain the spreading rate of 8-10 sq mtr per litre for a single coat application to achieve about 20-25 microns DFT for 6-8 Hrs

Coating :-Brush apply one coats of Dr Fixit Raincoat Waterproof Coating without any dilution Maintain the spreading rate of 3.5 - 4.0 sq mtr per litre/coat application to achieve about 120-130 microns DFT. The second coat of Dr Fixit Raincoat Classic Topcoat to be apply with interval of 6-8 hours without any dilution Maintain the spreading rate of 7-8 sq mtr

S&F 15mm bore CP brass Two way bib Cock screwed for iron pipe or ferrule and fixed complete all as specified and as directed.CA Part No: 35041PM 2 (Make : Jaquar)

S&F in repair sinks with drainage board made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed .

S & F Silver Shine Stainless Steel Kitchen Plate Rack, complete all as specified and directed . Size: 24 x 30 x 10 Inch . Make Blue Star,Nirali,Paryag

M&L Coloured Glazed Ceramic tiles (Digital Designer tiles) 300 x 450 and 6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 with all possible design combination as specified. complete all as specified and directed..

M&L non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

Demolition of precast concrete block walling and similar items i.e.. ashlar facing dressed stone work, precast concrete articles etc., of any description and in any position, built in cement mortar, including all quoins, arches and pillars etc. complete all as specified and directed.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celling etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers i.e.. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 )

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of plastered surfaces of wall and applying 2 coats of Oil Bound distemper over 1.5mm to 2mm thick wall putty finished to a even and smooth finish over a coat of alkali primer complete all as specifed directed by Engg-in-charge.

M&L for preparation of the plastered surfaces of ceiling & applying two coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coat synthetic enamel paints on new steel surfaces over a coat of red oxide zinc chrome primer complete all as specified and directed.

M & L applying two coats of synthetic enamel paint on old steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified & directed..

Demolition of cement concrete of any description and in any position (reinforced) as in slab, pillars and the likes etc complete all as specified and directed.

M&L for complete removal of existing roof treatment incl brushing and applying neat cement slurry with 3 Kg/Sqm of cement complete all as specified and directed.

M&L for averaging 25mm thick PCC of type B-1, 1:2:4 (20mm graded stone aggregate) for padding incl water proofing compund complete all as specified and directed.

M&L Rendering 10 mm thick of CM 1:4 on concrete roof surfaces is to be finished even and smooth without using extra cement with mixing water proofing compound @3% by weight. complete all as directed.

M & L for water proofing treatment to roof slab by applying one coat of bituminous / polymrised primer confirming to IS 3384 @ 0.30 ltr /sqm and laying APP modified membrane pre-fabricated , reinforced with non woven polyester , of 3.00 kg/sqm (minimum) , 3mm thick minimum with minimum 75mm side overlaps and minimum 100mm end overlaps complete all as specifiedand directed.

M&L cleaning surface and applying two coats of aluminium paint on roof or vertical surfaces complete all as specified and directed.

Taking down chowkat or frames n.exc 1.5 sqm with shutters without taking off shutters from the frame and removing to store complete all as specified and directed.

Taking down shutters of any description and in any position exceeding 1 sqm & not exceeding 2 sqm each complete all as specified and directed.

M&L for PCC type B1, 1:2:4 (using 20mm graded stone aggregate) as in hold fasts/ bed blocks/ coping etc, all as specified.

M&L for Machine pressed rubberized precast conrete interlocking paver block any shape and size connfirming to IS 15658-2006 of 60 mm thickness M-40 Grade with grey pigment complete all as specified and directed.

Sand cushioning 25 mm thick for interlocking paver blocks including watering and consolidation complete all as specified and directed.

M&L for 75mm thick PCC type D-2, 1:4:8 (40 mm graded aggregate ) for receiving floor finishes complete all as specified.

M & L 100 mm thick plain cement concrete type D 2 1;4:8 (Using 40 mm grade stone aggregate ) as in sub base complete all as specified and as directed..

M & L Cement concrete in foundations, filling and mass concret type B 2 1;4:8 (Using 40 mm grade stone aggregate ) as in foundations complete all as specified and as directed..

M&L for preparation of old treated plastered or unplastered surfaces of walls including cornices by brooming down or steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot, filling cracks/holes with putty and applying one coat of distemper oil emulsion on walls complete complete all as specified and directed.

M&L for preparation of old treated plastered or unplastered surfaces of ceiling including cornices by brooming down or steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot, filling cracks/holes with putty and applying one coat of distemper oil emulsion on ceiling complete all as specified and directed.

M& L for preparation of old decorative surface of wall and applying two coat of acrylic weather proof paint (Exterior grade) Complete as all specified and directed.

S&F 30 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels commenrcial face on bath sides with lipping/frame to match complete all as specified and directed.

M & L for 30 mm thick glazed and skeleton shutters of 2nd class Hard Wood(Not less than Hollock wood) local made shutter, open rebated and prepare to revive glass, gauge etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.24 (a) supplied and fitted to chowkat complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed..

M&L preparation of the new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 100 mm long butt hinges stainless steel medium weight and fixed to wooden or PVC frame fixed in repairs by stainless steel screw complete all as specified and directed..

S&F aluminium handles cast type, anodized of 150 mm size complete all as specified and directed.

S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed all as specified and directed.

S&F butt hinges 100mm long medium weight, cold rolled mild steel complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Dismantling water tanks of any description and in any position , of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl fixing arrangment for inlet/outlet/overflow & vent pipe of standard size complete all as specified & directed..

S&F Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed complete all as specified and directed.

S&F Vitreous China, wash down water closet pan "Pedestal pattern" white including connection to drain and to flush pipe and anti syphonic pipe including all joints and making good the disturbed surfaces complete all as specified and directed.

S&F in Repairs PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity (ISI marked) white with inlet, ball valve, float and handle, flush pipe of polyethylene pvc 32mm dia high or low density including brackets complete all as specified and directed.

S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified and directed.

S & F in repair vitreous china wash basin pedestal type , white flat back , size 550mmx450mm with and including pedestal, Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including bracket , CP waste coupling & flexible waste pipe complete all as specified and directed .

S&F in repair Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Stop valves, fancy type chromium plated ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified and directed.

S&F pillar taps in repair of cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with long swan shanks and fly nuts screwed for iron pipe, 15mm bore fancy type complete all as specified and directed.

S&F stainless steel health faucet witrh 1 Mtr tube and hoock complete all as specified and directed.. Confirming to Cat part No ALD573 of jaguar/PRAYAG complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed..

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed..

S&F in repair PVC (SWR) floor trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed.

Excavation in trenches n.exc. 1.5m wide and n.exc 1.5 m in depth for foundation for laying /taking down sewage / water supply lines , forming bottom surfaces to required slpoe & gradient and n.exc 10sqm on plan and n 'exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed

Removing excavated soil/ materials to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed.

S&F (concealed / open)20 mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified and directed. with fitting including taking down existing GI tubing 15mm bore

S&F (concealed / open) 25mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required with fitting including taking down existing GI tubing 15mm bore complete all as specified and directed.

S&F in repair stainless steel grating 150 x150mm size over floor trap anti cockroach all as approved sample all as specified and directed.

S&F in repair of PVC cabinet size 650 x 400mm, comprising of looking glass, space for bath soap, shampoo, tooth brush and paste, handle towel rail complete allas specified and as approved of any fo floowing makes :- HINDWARE / CERA / NEYCER / PARRYWARE/CLASSIC complete all as specified and directed.

S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden /plastic cleats(Minimum weight 190gms) complete all as specified and directed.

S&F Roof trusses (framed) trusses purlins and fastening (etc.,angle, channel,tubular section,round pipe) or flat section including distance pieces, MS plates/ gusset plates, cleats, hold fast etc. conforming to Gde of steel Fe 410-0 or Fe 310-0 complete all as specified and directed.

Dismantling of stone slabs and tiles (Kota stone etc.) of any description or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

S &F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in roof covering / cladding to wall, fixed with L or J hooks all as specified and directed.

Surface Preparation Surface must be thoroughly cleaned, free of dust, grease etc and washed well with water. The surface to be checked for cracks, hollowness and loose plastered areas etc if any. All loose plaster and cracks larger than 10 mm width to be repaired with polymer modified mortar using Dr. Fixit Pidicrete URP. The cracks up to 5 mm to be treated with Dr. Fixit Crack-X Paste and the larger ones up to 10 mm with Dr. Fixit Crack-X Shrinkfree. Priming After the proper surface preparation and curing of repaired areas wash the surface well and maintaining it in saturated surface dry condition proceed for priming using Dr. Fixit Primeseal diluted in 2:1 ratio with water (2 parts Primeseal diluted with 1 part water). Maintain the spreading rate of 8-10 sq mtr per litre for a single coat application to achieve about 20 – 25 microns DFT. Allow it to dry for 6-8 hrs. COATING Brush apply one coats of Dr. Fixit Raincoat Waterproof Coating without any dilution Maintain the spreading rate of 3.5-4.0 sq mtr per litre / coat application to achieve about 120-130 microns DFT. The second coat of Dr. Fixit Raincoat Classic Topcoat to be apply with interval of 6-8 hours without any dilution. Maintain the spreading rate of 7-8 sq mtr per litre / coat application to achieve about 50-60 microns DFT.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm as in any type of soil complete.

M&L, PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed Fe 410-W (Gde- E- 250) quality- A complete all as specified & directed..

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

M/S S. SINGH TRADERS (BID ID -3498380)