Preservation of Gurudwara at Chattipadshahi Baramulla B.W.O installation of RGB Lights at Gurudwara Chatti Padshahi Baramulla

Wiring for Light point/Exhaust fan point/Fan Point with (P+N+E) 3x1.5 sq.mm FRLS-H PVC insulated Multi strand Copper conductor single core cable in surface/recessed Conduits.The job including cost of Circuit Wire (6/8 points per circuit) in 2.5 sq.mm (with 1x2.5 sq.mm) for earth Multi strand Copper wire from Switch board to D.B complete (Havells/Polycab/Anchor Make),excluding cost of Conduits with other accessories like bends,Deep Junction Boxes,Surface Junctions where required etc to be laid in wall complete, with 01 No.of 6 Amp Modular Switch,Modular Plate,Cover in front,Modular blanking plate where required & suitable GI box etc ISO/IEC Certified Havells/ Legrand/Panasonic/Anchor Rooma Plus/Schneider or eq. Make & shall be approved before execution of work.(Group B)

Wiring for circuit/ submain wiring alongwith earth wire with 2x6+1x6 Sqmm of FRLS-H PVC insulated copper conductor, single core cable in surfacel recessed medium class PVC conduit as required excluding cost of conduit

Supply/Fixing/Testing and Commissioning of 6Amp to 16Amp Rating ,240v,*C* Curve 10K, Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB . DB Complete with connections.(Havells/L&T/Siemens/Legrand/ABB /Schneider or eq. Make to be approved by EIC)

Supply/Fixing/Testing and Commissioning of 40 Amp, Double pole, (P+N) 240 V, C* Curve 10K,Miniature Circuit Breaker (MCB) in the existing MCB DB complete with connections. (Havells/L&T/Siemens/Legrand/ABB/Schneider or eq. Make to be approved by EIC)

Supplying and fixing 12 way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator)

Supply, Installation , Testing and commissioning of 40-45 Watt Mono linear wallwasher made of aluminium extrusion, LED Make : CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG or eq. Make to be approved by EIC, exterior-rated linear luminaire (1000mm), Input Power 40 watt, Rated input supply of Input Voltage 24V DC, Luminaire luminous flux Minimum range 1440Lm. IP protection rating : IP66. The luminaire should have multiple beam angle options : 10X55° ( as per site requirement ).Job includes all civil work for installation of lights at desired location with the help to frame/angle/nut bolts/Iron Galvanized Razor Blade Wire for monkey meance as directed by Engineer-in-charge. Manufectures word Mark/ Name Engraved/ Embossing / Screen Prionting on die cast housing to allw traceability/ authenticity. (LM70/LM80) certificate/report with liable warranty of product/accessories from OEM shall be submitted.. The Minimum warranty shall be for 2 years. .Job includes all civil work for installation of lights at desired location with the help to frame/angle/nut bolts/Iron Galvanized Razor Blade Wire for monkey meance as directed by Engineer-in-charge.Complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required.

Supply, Installation , Testing and commissioning of LED projector light fixture 50-60W, LED, MONO, IP 66. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK07. Voltage input AC240V . The luminaire should have options for various beam angle: 10°/25°/50°/60°. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. Minimum Light fixture Lumen output atleast 3000 Lumens. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements.Job includes all civil work for installation of lights at desired location with the help to frame/angle/nut bolts for monkey meance as directed by Engineer-in-charge. Manufectures word Mark/ Name Engraved/ Embossing / Screen Prionting on die cast housing to allw traceability/ authenticity. (LM70/LM80) certificate/report with liable warranty of product/accessories from OEM shall be submitted.. The Minimum warranty shall be for 2 years. .Job includes all civil work for installation of lights at desired location with the help to frame/angle/nut bolts/Iron Galvanized Razor Blade Wire for monkey meance as directed by Engineer-in-charge.

Supplying, installation, testing & commissioning of AC220V input, DMX -controller, O/P support standard-USITT DMX512-1990 universal protocal complete with 6 button push button keypad/panel complete with splitter, decoder etc as reqd.. (Complete job)

Supply, installation, testing and commissioning of 10 KVA Servo Motor controlled oil colled Automatic Voltage Stabilizer to operate on single Phase load (Transformer oil to be cooling medium and shall be ISI marked IS-335 with latest amendments) and suitable to operate on unbalanced input phase voltage of 160 to 280 volts and delivering voltage of 230 ± 1 %, single Phase, 50 Hz ± 3 % AC power supply. The stabilizer shall be copper wound in sheet steel case, duly painted and filled with transformer oil. The voltage stabilizer provided with single phase, 100 Amp Aluminium bus bar, MCCB DP 100 Amp and on load change over switch 63/100 Amp 2P required during by passing the voltage stabilizer.

Supply, installation, testing and commissioning of (70-80watt) LED RGBW floodlighting luminaire for façade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9, fixture shall be suitable to operate at an ambient temperature range of 10 ºC t + 50 ºC and shall be IP 65 and IK 06 rated. Lifetime shall be at least L70:50000 burning hours at 50 ºC . Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required.

Supply, installation, testing and commissioning of (100watt) LED RGBW floodlighting luminaire for façade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9, fixture shall be suitable to operate at an ambient temperature range of 10 ºC t + 50 ºC and shall be IP 65 and IK 06 rated. Lifetime shall be at least L70:50000 burning hours at 50 ºC . Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required.

Supply, Installation , Testing and commissioning of IP67 power supply 24V output anlog with its enclosures Power consumption- 200W

Supply, Installation , Testing and commissioning of IP66 box enclosure for power supply.

Supply, Installation, Testing and Commissioning of Outdoor Architectural IP67 LED Neon Flex Strip. (RGBW) Luminaire should be flexible 24V DC LED Strip based Luminaire with Spotless & Uniform diffused illumination. System wattage should not exceed 15W/Mtr ( ± 5%) with System efficacy not less than 40LPW. (± 5%). Flexible Strip Luminaire should have UV Resistant Silicon construction with Opal diffused optics. Luminaire should be suitable for vertifcal bending feature in same axis of illuminating surface. Luminaire should bening radious should of Min 300mm( ± 5 %), Ingress Protection should be IP67. Luminair should be available in standard 5mtr. length and suitable to cut precisely at any length as per design requirement. Fixture should be compatible with Non-Integral type high efficiency 24V DC CV Outdoor Rated driver (To be ordered Seprately). Life 50,000 B Hrs @ L70B10, CRI > 80, THD < 10%, Flex should be sutiable for operating ambient temp 25ºC to + 50º, operating humidity 10-90%. Flex luminaire should have 5 years warranty. Flex should be suitable for surface mounting using Aluminium channel (To be supplied as seprate item) and fixing accessories. End Caps should be solder less or Silicon End caps maintaining IP67 rating. LED Neon flex Strip width should be Approx. 16mm (±5%) and height should be approx. 15 mm (±5%). Certificates to be furnished from NABL accredited lab: LM 79 report, type test certificate, luminaire performance & safety report for compliance to IEC 60598, OS 10322-5. IS 161-03/05/06/07, surge: IEC 61000-4-5, EMC: EN 55015, All NABl report to be furnished with NABL logo & ULR no. for Authenticity along with BIS Certificate.

Supply/Laying of 32/38mm Dia and 2mm thick all weather proof PVC Conduit of Anchor/Ravindra Blue/Finolex or eq. Make to be approved by EIC with other accessories like bends,Saddles,etc complete to be fixed on walls .

Supply/Laying/Connecting and Commissioning of 50 sq.mm 2-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havells/Polycab/Anchor or eq. Make to be approved by EIC with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench .(Material to be approved before execution)

CAMC for 2 years after Defect liability period of 3 year