REPAIR REPLACEMENT AND CERTAIN MISC ESSENTIAL REPAIRS FOR FALSE CEILING JOINERY SHEETING PANELLING SANITARY FITTINGS TILING ETC AT MIL STN BHUJ

Amount

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed. and M&L for machine cut Kota stone slab 20 mm to 25 mm thick , as in flooring with border, laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish, over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) complete all as specified and directed. (Note:- All exposed edges of kota stone flooring shall be finished as half round / bullnosed as directed and white marble strip border shall be provided to the pattern and design as approved).

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed. and Material and labour for Granite slab 20mm thick machine cut, bedded and joined with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) complete all as specified and directed.

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc and Material and labour for precast cement concrete block masonry with solid blocks of PCC (1:5:8) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

Material and labour for rendering 15 mm thick in CM (1:6) on fair faces of Old or New surface brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered sufaces of walls & applying 2 coat of cement base paint over a coat of primer complete all as specified and directed.

Preparation of old decorated plastered or unplastered surfacesof wall including washing , rubbing down and stopping of distempered surface Material and labour for applying two coat of distemper oil emulsion paint white or tinted complete all as specified

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and Material and labour for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and includin screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4 ) complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and Material and labour for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and includin screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4 ) complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and Material and labour for glazed ceramic tiles, coloured tiles, 200mm x 300mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and Material and labour for Ceramic tiles 7 to 8 mm thick coloured tiles , each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm mm thick on vertical faces ie. as in skirting/dado including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and Material and labour for verified dark shade ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm in floors and kirtings and dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4 ) complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and Material and labour for chequred cement concrete tile 30 cm x 30 cm x 25 mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry in path/ floor and includin screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4 ) complete all as specified and directed.

Supply and fixing Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, hoisted and fixed Dismantling water tanks of any description and in any position , of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

Supply and fixing Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, hoisted and fixed in position complete all as specified and directed Dismantling water tanks of any description and in any position , of capacity exceeding 1000 litres but not exceeding 2000 litres complete all as specified and directed.

Supply and fixing Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed.

Taking up or down existing unserviceable mild steel water tubing and connections 15 mm dia, any grade, of any description or in any position including fittings complete Supply and fixing in repair unplastisized PVC pipe, 15mm dia (nominal) of pressure rating 10 per centimeter square complete with fittings and fixed to walls/ ceiling/floors etc in required length complete all as specified and directed all as specified and directed

Taking up or down existing unserviceable mild steel water tubing and connections 20mm dia, any grade, of any description or in any position including fittings complete Supply and fixing in repair unplastisized PVC pipe, 20 mm dia (nominal) of pressure rating 10 per centimeter square complete with fittings and fixed to walls/ ceiling/floors etc in required length complete all as specified and directed all as specified and directed

Taking up or down existing unserviceable mild steel water tubing and connections 25 mm dia, any grade, of any description or in any position including fittings complete Supply and fixing in repair unplastisized PVC pipe, 25 mm dia (nominal) of pressure rating 10 per centimeter square complete with fittings and fixed to walls/ ceiling/floors etc in required length complete all as specified and directed all as specified and directed

Supply and fixing PVC Valveless, syphonic action type,flushing cistern, low level, white,with inlet ball valve, float, handle, flush pipe 32 mm dia ( or for IWC 1.2 m height ), PVC connecting tube 15 mm dia with brass chuck nuts including brackets 10 ltrs capacity fixed in repairs

Supply and fixing in repairs tubular towel rail of brass chromium plated , 20 mm dia, D type, 60 cm long betweem flanges complete all as specified and directed.

Supply and fixing in repair brass chromium plated shower rose 125mm size with swivel joints including fixing to steel pipe or union complete all as specified and directed.

Supply and fixing vitreous china urinals, bowl type flat back, as ordered , minimum size of 465 x 355 x 265 mm, white, with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

Supply and fixing Vitreous China, wash down water closet pan "Pedestal pattern" white including connection to drain and to flush pipe and anti syphonic pipe including all joints and making good the disturbed surfaces complete all as specified.

Supply and fixing Vitreous china squatting pan, 'Orissa' pattern,size 580 x 440 mm white, with integral foot rests with 'P' or 'S' trap fixed in repairs complete all as specified and directed.

Supply and fixing Vitreuos china wash hand basin 550 x 400 mm incl cutting for and pinning in end of brackets or erecting stand, and inclusive of fixing and supply and waste pope and one CP pillare cock 15 mm dia , PVC connecting tube 15 mm dia with brash chuck nuts and CP waste coupling 32 mm dia complete find in repair .

Supply and fixing grating square 150mm size of PTMT (minimum weight 100) complete all as specified and directed.

Supply and fixing in repair Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified .

Supply and fixing Stop valves, cast copper alloy, ISI marked ,screwed down high pressure with crutch of butter fly handle, fancy type , chromium plated,with long shank and cup, screwed both ends for iron pipes or for union , for 15 mm bore , , fixed in repair , complete all as specified and directed.

Supply and fixing PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified

Supply and fixing in repairs Bib tap standard of PTMT high pressure bore/dia of pipe 15mm (Minimum weight 90gm) complete all as specified and directed.

Material and labour for Curtain rod, powder coated aluminum alloy of 20 to 25mm dia pipe decorative finish with fixed on walls with brass screws with PVC rawl plugs as in curtain rods fixed in repair complete all as specified and directed.

Hacking out old broken glass of any thickness and any description from metal frame including punching or drilling out old glazing pins/spring clips and providing and Supply and fixing 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each panecomplete all as specified and directed.

Material and labour for mild steel in framed work [Fe-410-W (grade 250) quality A] as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing+B191complete all as specified and directed.

Supply and fixing for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240 with MS Bolts including washer and MS gusset plate any thickness etc including Dismantling of wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any guage of any description and in any position as in roof coverings including connected ridge and.Material and labour for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in roof covering / cladding to wall, fixed with L or J hooks all as specified and directed.

Material and labour for false ceiling work of galvenised MS ceiling grid system 'UNLOCK" comprising of main runner 38mmx24mmx0.35mm cross tee 4mmx24mmx0.40mm and GI suspenders 8mm dia fixed to ceiling with and including supply and fixing mineral fibres acoustic ceiling board of size 600x600x12mm thick complete all as specified and directed and fixed as per manufacturers instructions including taking down existing ceiling of any discription and in any position and making good the disturb surfaces to match with the existing surfaces and finishes

Taking down existing wire mesh of any discription and in any position and supplying and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm (weight not less than 600 gms/per sqm) and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed

Taking down shutters of any description and in any position exceeding 2 sqm each complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position not exceeding 1.50 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position exceeding 1.50 sqm but not exceeding 4 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.

Supply and fixing factory made 30 mm Flush shuttes solid core construction, with block board core and plywood fce panels, commercial type on both sides complete all as specified and directed.

Supply and fixing factory made Second class hard wood Glazed and skeleton shutters 30 mm thick, divided into squares with plain chamfered or rounded mitred and rebated sash bars any numbers complete all as specified and directed.

Supply and fixing factory made solid panel PVC wire gauzed door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail with and including panels of aluminimum wire gauzed Supplying and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm (weight not less than 600 gms/per sqm) and fixed with aluminium wire staples, The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rai ; Panelling of plain colour PVC sheet 5 mm thickness to be fitted in MS frame welded/sealed to the style and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

Supply and fixing 100 mild steel butt hinges heavy weight ,cold rolled mild steel and fixed complete all as specified and directed.

Supply and fixing Aluminium alloy, anodised ,barrel tower bolts extruded aluminium 150mm long complete all as specified and directed.

Supply and fixing Aluminium alloy, anodised handles extruded fabricated type anodised 150mm long complete all as specified and directed.

Supply and fixing Aluminium alloy, anodised ,sliding door bolt 300mm long with hasp, staples (bolt type) and fixing clips of sheet, cast or extrudedsection and fixing bolts slinding of extruded section complete all as specified and directed.

Supply and fixing floor door stopper of aluminium alloy body of length 150mm and tounge, anodised, with hard drawn steel spring , fixed in floor complete all as specified and directed.

Supply and fixing factory made steel windows with side hung glazed window including projecting type hinges with steel handles and steel peg stays , complete with glazing bars, dovetailed or welded and including mild steel grills/guard bars of approved design or pattern made of 12mm dia square bar as shown on CE (Fy) Hyderabad drawing No TD/AR/06 sheet No 2/8 dated 03.04.02 with and including applying two coats of synthetic enamel paint alround over a coat of red oxide primer complete all as specified and directed.

Supply and fixing steel ventilatores with top hung glazed shutter including projecting type hinges with steel handles and steel peg stays , complete without glazing bars, dovetailed or welded and including mild steel grills/guard bars of approved design or pattern made of 12mm dia square bar as shown on CE (Fy) Hyderabad drawing No TD/AR/06 sheet No 2/8 dated 03.04.02 with and including applying two coats of synthetic enamel paint alround over a coat of red oxide primer complete all as specified and directed.

Material and labour for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Material and labour for Powder coated (minimum thickness of powder coating 50micron) aluminium sliding window (three track) with aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.

Material and labour for Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size 2 Nos, 3 Nos powder coated aluminium hinges heavy duty and 02 Nos 150mm long powder coated aluminium tower bolts in each door shutter with powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board etc. shall be measure and paid for separately.

Material and labour for powder coated aluminum grill of design No DG-104, 7.5mm thick sections of decogrill or of equivalent approved make with 1 mm thick 'F' sections of suitable size complete all as specified and directed.

Supply and fixing wire mesh of any discription and in any position and supplying and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm (weight not less than 600 gms/per sqm) and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed

Material and labour for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Supply and fixing in replacement stainless steel kitchen plate rack made out of 1.1 mm thick sheet of size 800 x 900 mm complete all as specified and directed.

Supply and fixing in rapir sinks with drainage board made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed on walls complete all as specified and directed

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed on walls complete all as specified and directed

Supply and fixing PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed.

Supply and fixing PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed.

Supply and fixing PVC (SWR) Junction, single, (single T) equal or unequal with access door, 75 mm bore, complete all as specified and directed.

Supply and fixing PVC (SWR) Junction, single, (single T) equal or unequal with access door, 110 mm bore, complete all as specified and directed.

Material and labour for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

Material and labour for PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.

Taking Down cement plaster on brick walls incl raking out joints hacking for key scrubbing down with water etc and Material and labour for Rendering 15 mm thick in CM(1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement including Preparing newly plastered surfaces of walls and applying three coats of distempering to match the adjacent surfaces complete as all spfd and directed.

Taking Down cement plaster on brick walls incl raking out joints hacking for key scrubbing down with water etc and Material and labour for Rendering 15 mm thick in CM(1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement including Preparing newly plastered surfaces of walls and applying two coats of cement base paint to match the adjacent surfaces complete as all spfd and directed.

Taking Down cement plaster on brick walls incl raking out joints hacking for key scrubbing down with water etc and Material and labour for Rendering 5 mm thick in CM(1:3) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement in ceiling including Preparing newly plastered surfaces of Ceilings and applying two coats of distempering to match the adjacent surfaces complete as all spfd and directed.

Material and labour for providing precast cement concrete luvres and jallies 25 mm thick set in cement mortar 1:4 including all moulding but excluding frame (pre cast frame shall be measured separately and paid) complete all as specified and as directed.

Supply and fixing Prelaminated particle board, exterior grade, prelaminated one side with decorative choce lamination & other side balancing white laimnation fixed with screws to timber frame work

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) and disposing rubbish off the premises of cantonment complete all as specified and directed.

Material and labour for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in foundation of manholes, mass concrete etc. complete all as specified and directed.

Material and labour for 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base finished the surface rough to receive floor finishes etc complete all as specified and directed.

Material and labour for 50mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in sub base surface even and smooth without using extra cement complete all as specifed and directed.

M &L for remove exiting water proofing treatment and expose top surface of RCC slab and clean the roof surface with water and using wire brush all as directed by engineer-in - charge including M & L for plaster 20 mm thick in one layer CM(1:4) on concrete surface over roof slab finished even and smooth without using extra cement over and including application of cement slurry @3kg/sqm after cleaning,sweeping the old RCC slab to remove dust before application of plaster complete and Material and labour for water proofing treatment to roof slab by applying one coat of bituminous / polymrised primer confirming to IS 3384 @ 0.30 ltr /sqm and laying Actetic Polypropylene (APP) modified membrane pre-fabricated , reinforced with non woven polyester , of 3.50 kg/sqm (minimum) , 3mm thick minimum with minimum 75mm side overlaps and minimum 100mm end overlaps and applying one coat of bituminous aluminium paint over APP membrane etc complete all as specified and as directed.

S & F in repair stainless steel health faucet with 1 mtr tube and hook complete all as specified and directed. Make Jaquar ALD 573 or equivalent of Parryware/Hindware

Supply and fixing Single lever basin Mixer for table top W.H.B complete all as specified and directed. Make: Jaquar/Parryware/Hindware

S & F in repair CP brass wall mixer for 15 mm bore of pipe with L Bend (Provision for OH Shower) (Make Jaquar Cat No FUS-5273UPR with Provision for both Hand Shower and Overhead Shower Complete with 115 mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) or equivalent of Parryware/Hindware) complete all as specified and directed.

S & F in repair 10 mm thick plain edge moulded Corner Glass shelf with brackets of 300 mm wide (Make Jaquar ACN-1173 Corner Glass Shelf (with Bracket) equivalent of Parryware/Hindware complete all as specified and directed.

Supply and fixing in repair Solid PVC Wall Lining consisting of 5 mm thick Plain wood grain printed PVC sheet inclusive of solvent cement and fixing at site on and including 5mm thick PVC sheet fillet of width 35mm for wall paneling (At the spacing of 1 feet centre to centre) inclusive of fixing on to wall to make PVC Frame complete all as per specification and drawing and all as specified and as directed. Make : Sintex/Rajshree plasti wood

Material and labour for machine pressed Precast concrete interlocking pavers block with grey cement and pigment any shape and size confirming ti IS 15658-2006 of 60 mm thickness M-40 grade complete as specified and as directed.

Material and labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Supply and fixing door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed. Note :- The credit for the retrieved items has been mentioned in the Sch of Credit in pdf form. The contract sum will be calculated after deduction of credit from the amount of BOQ offline.

zotabrothers

Khodiyar Construction

Sanjay Enterprise

Ram J. Laljani