PROVN OF MISCELLANEOUS WORK SERVICES IN 3004 SQN AT AF STN NALIYA

Amount

Excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 metre in depth and getting out hard/dense soil complete all as specified and directed.

Material and labour for PCC 1:3:6, type C-2 as in foundation base complete all as specified and directed.

Material and labour for design mix M-30 for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material and labour for design mix M-30 for Columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter complete all as sepcified and directed.

Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Material and labour for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces is to be finshed with even and smooth (without using exrta cement)complete all as specified and directed.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm as specified and directed.

Removing excavated material in soils exceeding 50 metre and depositing where directed at a level not exceeding, 1.5 metre above the starting point as directed.

Material and labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 -W (GdeE- 250) quality a complete all as sepcified and directed.

Material and labour for joist, channel, angle or tee sections independently wihtout connection plate, etc (cut to ordinary lenbgths i.e wihtin 20 mm of the length indicated) complete confirming to FE-410W (Gde- E 250) quality A complete all as specified and directed.

Material and labour for 1.25 mm thick plain, black, mild steel sheeting, in sliding steel gates cut to size holes punched, welded seams including bending etc complete all as specified and directed.

Material and labour for mild steel screw of bolts 20 to 25 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt exceeding 22.5cm and not exceeding 30cm long complete all as specified and directed.

Material and labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of zinc redoxide chrome complete allas specified.

Material and labour for cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre,thickness of concrete not exceeding 25 cm complete all as specified and directed.

Supply and fix steel rolling shutters of 1.25 mm thick laths, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull gear operated type with bevel gear box and crank handle complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, ooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips → complete confirming to FE-410W (Gde- E 250) quality a complete all as specified and directed.

Demolition of brick/stone/pcc block masanory work built in cement mortar in any description complete all as specified and directed.

Rough Excavation not exc 1.50 m deep and getting out soft/loose soil complete all as specified and directed.

Forming embankment including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering, ramming/rolling and finishing to required size etc not exc. 1.5 metre high from base, compaction of earth filling shall be done under optimum moisture conditions matrl retreived from site complete all as specified and directed.

All as per serial item number 20.00 here-in before but height exceeding 1.50 metre and not exceeding 3.00 metre from the base material retreived from site complete all as specified and directed.

Material and labour for precast concrete block masonry (1:5:8) with solid blocks exceeding 10 cm width and setting in CM (1:6) complete all as specified and directed.

Material and labour for hardcore of gauge not exceeding 63mm deposited spread and levelled in layers nexc 15cm thick watered and rammed to a true surfaces complete all as specified and directed.

Material and labour for applying two coats of acrylic antifungal emulsion paint, exterior grade over a coat of primer as per manufactures instructions in camouflage pattern on wall/roof surface Including removal of existing treatment, with brooming down or steel wire brushing etcat any position, any description and at any height etc including necessary scaffolding arrangement for carrying out the work complete all as specified and directed.

Material and labour for point wiring for one light/Fan/socket 5Amps point on indep board controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, FRLSH cable 1100 volts grade ISI marked drawn through and including heavy duty ERW conduit not less than 20 mm dia concealed type , including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly complete all as specified and directed by Engr-in-charge. Note : Point wiring will be done from Main DB. Length of point wiring may be beyond 5 mtrs and no extra amount for long point wiring will be considered complete all as specified and directed.

Material and labour for point wiring for one light/Fan/socket 5/15Amps point on indep board controlled by one, one way switch complete with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, FRLSH cable 1100 volts grade ISI marked drawn through and including heavy duty ERW conduit not less than 20 mm dia concealed type , including all accessories like bend, tees, junction boxes etc. including 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly complete all as specified and directed by Engr-in-charge. Note : Point wiring will be done from Main DB. Length of point wiring may be beyond 5 mtrs and no extra amount for long point wiring will be considered complete all as specified and directed.

Material and labour for sub main wiring with 4 run single core multistranded copper conductor cable, of size 6Sqmm, PVC insulated, unsheathed, FRLSH drawn through and including heavy duty ERW steel conduit not less than 20 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6 Sqmm, PVC insulated, unsheathed, fire retardant as earth wire, fixed on wall / ceiling complete including taking down old sub main wiring. Note: 04 Runs of main cable and one run earth wire with conduit will be measured as one RM for payment complete all as specified and directed.

Supply and fix switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

Supply and fix flame proof switch socket & plug combined in LM6 cable termination box in LM6,16A, 250V, 2P+earth complete all as specified and directed .

Supply and fix flame proof switch socket & plug combined in LM6 cable termination box in LM6,32A, 433V, 4P+earth complete all as specified and directed.

Supply and fix flameproof/weatherproof LED flood Light Fittings 90 Watt complete all as specified and directed.

Supply and fix flameproof weatherproof distribution board aluminum die cast alloy in LM6 material sheet metal enclosure incl MCB 63Amp TPN(Incomer) and 12 Nos SP 6-32 Amp(Outgoing) terminal, wiring and incl all fitting accessories etc complete all as specified and as directed.

Material and labour in replacement of earthing complete with galvanised steel earth plate electode 600 x 600 x 6 mm thick buried directly in ground earth pit with adequate quantity of charcoal and dust and common salt , not less than 2.25 mtr deep below ground level connected to & including galvanised earth lead wire 4 mm dia drawn through GI protection pipe of size ordered specified for protection of earthing lead from earth electrode to test point/main DB from mechanical injury or tempering by means of nuts and bolt check nuts and washers of galvanised iron sheet all as shown in electrical plate No 3 of SSR Part - I and connected to earthing test point complete including testing, refilling earth and removal of surplus soil upto 50 mtrs, PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made out of 6 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed.

M/S HARI CONSTRUCTION (BID ID -3219399)

nidhi construction co. (BID ID -3217047)

JAI HANUMAN CONTRACTOR (BID ID -3219650)

Sagathiya Builders (BID ID -3219557)