REPAIR TO ROOF,FLOORING,WIREMESH,WOOD WORK AND OTHER B AND R ITEMS AT SECTOR V TO XI UNDER GE (N) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness ( below or above ground level).

Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically provided for.

Dismantling of Asbestos cement (corrugated or semicorrugated etc) sheets in roof/ridge coverings

Dismantling plain or corrugated steel sheeting , any gauge, thickness including Nainital or similar pattern roof/ridge coverings.

Brickwork or stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and directed.

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and incl taking down carefully pointwiring for refixing complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section in any position (unframed work) complete all as specified and directed.

Dismantling timber fillets, rails, posts, rafters, purlines etc.under 40 Sqcm in section. (Unframed work) complete all as specified and directed.

Dismantling mild steel work of any description complete all as specified and directed.

Dismantling of boarding , any description,fixed in any position with nails complete all as specified and directed.

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

Taking down shutters of any description n exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm n exc 2 Sqm complete all as specified and directed.

Taking down chowkhats with shutters of any description n exc 1 .5 Sqm each complete all as specified and directed.

Taking down chowkhats with shutters of any description exc 1 .5 Sqm but n exc 4 sqm each complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F anodised aluminium frame for doors,windows, with one are more rebates including joining cleat for fixing etc complete with all fixing arrangement complete all as specified and directed. Note: Aluminium section shall not be less than 3mm thick.

S&F anodised aluminium door shutters,aluminium section weighing 0.55 kg/mtr including necessary joining cleats glazing clips rubber neoprene packing,handles 2 Nos in each door, hinges anodised aluminium snap beading scrws etc complete all as specified and directed.

Dismantling water tanks of capacity exc 500 & nexc 1000 litres and removing to store complete all as specified and directed.

Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to store complete all as specified and directed.

Disconnecting existing tanks of capacity exc 500 & nexc 1000 litres,setting aside (or lowering if required) for repairs,cleaning and removing all scale and dirt etc,from tanks and mouths of circulating pipes,etc,and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Disconnecting existing tanks of capacity exc 250 & nexc 500 litres,setting aside (or lowering if required) for repairs,cleaning and removing all scale and dirt etc,from tanks and mouths of circulating pipes,etc, and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Dismantling of floor hearth or wall tiling, including cement bedding but not backing and rubbish off the premises complete all as specified and directed.

M&L for brickwork with sub class’B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4.Complete all as specified and as directed.

M&L for brickwork with sub class’B’ bricks, straight or curved on plan exc 6m mean radius in half brick thick wall built in CM (1:4)complete all as specified and directed.

Taking down cement plaster of any description on brick or stone wall etc, including raking out joints, hacking for key,scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick, CM (1:4) on fair faces of brick work or concrete surfaces by making surfaces even and smooth without using extra cement and mixed with water proofing compound @ 2% of the total weight of cement or as per manufacturer's instruction complete all as specified and directed. Note-WPC shall be measured and paid under the relavant item)

M&L for rendering 10 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces by making surfaces even and smooth without using extra cement complete all as specified and directed.

M&L GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding , joists, etc. In walls, ceilings, stanchions, beams, etc. Including all laps , cutting and waste complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4, on one side of lathing and making surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick, CM 1:4 on other side of lathing by making surfaces even and smooth without using extra cement and mixed with water proofing compound @ 2% of the total weight of cement or as per manufacturer's instruction complete all as specified and directed. Note-WPC shall be measured and paid under the relavant item)

S&F for rolled mild steel in joist, channel, angle or tee / tubular sections , fixed independently with connected plates Fe 410-W (Gde- E-250) quality-B complete all as specified and directed.

M&L second class wrought hard wood in scantlings (Timber fixed) complete all as specified and directed.

M&L for 20mm thick second class hardwood planed at both sides boarding as in eaves boards complete all as specified and directed.

M&L for 6 mm thick asbestos cement corrugated or semi-corrugated sheets in roofs, walls ,sunshed etc fixed with L-Type or J-Type or cranked hook bolts complete all as specified and directed.

M&L for asbestos cement two-piece adjustable plain wing ridge 6mm thick fixed with L-Type or J-Type or cranked hook bolts complete all as specified and directed.

S&F for 0.63mm thickness of Galvanised,corrugated mild steel sheeting with two corrugations side lap, fixed with coach screw and washers, in roofs, walls etc with grade of zinc coating 275 gm/sqm fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F for 0.63mm thickness Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 gm/Sqm complete all as specified and directed.

S&F for 0.63mm thickness of Galvanised,corrugated mild steel sheeting with two corrugations side lap, fixed with coach screw and washers, in roofs, walls etc with grade of zinc coating 275 gm/sqm fixed with L-type or J-type or cranked hook bolts (Except sheeting) complete all as specified and directed.

S&F pre- painting galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding incl ridge hip etc fixed with tapping screws & L type or J type hooks etc complete all as specified and directed.

S&F pre- painting galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding incl ridge hip etc fixed with tapping screws & L type or J type hooks etc complete all as specified and directed.

S&F 4mm thick asbestos cement plain building boards, fixed to timber framework in ceiling with screws, and including refixing of old point wiring and fittings and replacing old damaged fittings complete all as specified and directed.

M&L for preparation of new surfaces of AC board on ceiling and applying three coats of white wash complete all as specified and directed.

S&F Anodised aluminium snap grid frame of size 605mm x605mm work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof by means of ceilling cleats/ 2 mm dia wire made out of G.I. flat 40 x 3 mm size 60mm complete all as specified and directed.

S&F for 10mm thick PVC insulation panels with EPS stuck 1mm pain PVC sheet suitably placed in false ceiling grid made of aluminium complete all as specified and directed.

M&L for 2nd class hard wood plain fillets ,square, rectangular or triangular in section ,clean sawn ,secured with nails or brads (sectional area exc13 sq.cm & n exc 25 sq.cm)as in studs of ceiling/sunshed complete all as specified and directed.

M&L for 2nd class hard wood plain fillets ,square, rectangular or triangular in section ,clean sawn ,secured with nails or brads (sectional area exc 3 sq.cm & n exc 6 sq.cm)as in fillet complete all as specified and directed.

M&L for 2nd class hard wood plain fillets ,square, rectangular or triangular in section ,clean sawn ,secured with nails or brads (sectional area exc 6 sq.cm & n exc 13 sq.cm) as in forking pieces in ceiling complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2,1:3:6(40mm graded aggregate) as in plinth protection ,footpath and making finished even and smooth without using extra cement complete all as specified and directed.

M&L for 40 mm thick cement concrete type B-1,1:2:4(20mm graded aggregate) as in floor th and making finished even and smooth with using extra cement complete all as specified and directed.

M&L for 38 mm width of strip glass dividing strips ,3 mm thcik and inserted in position complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor/ wall finishes in CM 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick rough plastering on vertical fair faces of brickwork surfaces in CM1:4 complete all as specified and directed.

M&L for non skid coloured tiles 7mm thick area of each tile exc 0.11 Sqm but n exc 0.18 sqm , in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for Vitrified ceramic tiles 10mm polished area of each tiles n exc 0.36 Sqm in floors and as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed coloured tiles in vertical surfaces. but 300mm x 200mm x 7mm thick set and jointed in cement slurry and pointed in colour to match complete all as specified and directed.

S&F 300 litre capacity ,rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) in position all specified in SSR Part –I complete all as specified and directed.

S & F 500 litre capacity ,rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) in position all specified in SSR Part –I complete all as specified and directed.

S & F 1000 litre capacity ,rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) in position all specified in SSR Part –I complete all as specified and directed.

S & F in repair 20mm dia of bore, ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe complete all as specified and directed.

S&F for second class hardwood plain,solid,straight,chowkats and frames,wrought,framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints complete all as specified and directed.

S & F 35mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels),with panels of timber flat on both sides(feather edged),or of veneered particle board medium density, wood particle board with commercial face veneers, fitted to chowkats complete all as specified and directed.

S & F 2nd class hard wood glazed and skeleton shutters 35mm thick open rebated and prepared to received glass, without (sash bars), edges of framing plain , chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I, Section 1 Clause 8.20 (a) complete all as specified and directed.

S&F 30mm thick glazed and skeleton shutters 2nd class soft wood , open rebated and prepared to receive glass, gauge etc divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars provided with stiles and rails as specified in SSR Part I ,section 8 clause8.20(b) complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rein forced with M.S. square tube supplying and fixing in opening as per specification and drawing complete all as specified and directed.

M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plaincolour PVC© channel PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock and bottom rail on either side as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded. Sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F solid PVC wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame complete all as specified and directed.

S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and as directed.

S&F 100mm medium weight ,cold rolled mild steel butt hinges (ISI marked) complete all as specified and as directed.

S&F 75mm medium weight ,cold rolled mild steel butt hinges (ISI marked) complete all as specified and as directed.

S&F 200 mm long mild steel barrel tower bolts ,stove enamelled black,with bright bolt (ISI marked) complete all as specified and as directed.

S&F 150 mm long mild steel barrel tower bolts ,stove enamelled black, with bright bolt (ISI marked) complete all as specified and as directed.

S&F in repair 300mm long mild steel sliding door bolts ,plate type , stove enamelled black,with bright bolt not less than 12mm with and including a minimum of 6 bolts and nuts , four on bolt plate and two on staple plate .

S&F in 150mm size mild steel pressed handles, oval type, stove enamelled black (ISI marked) complete all as specified and as directed.

S&F 125mm size mild steel pressed handles, oval type, stove enamelled black (ISI marked) complete all as specified and as directed.

S&F 100mm long Butt hinges, medium weight cold rolled mild steel (ISI marked) complete all as specified and as directed.

S&F 200mm Aluminium anodised barrel tower bolts of extruded section (ISI marked) complete all as specified and as directed.

S&F 150mm long Aluminium handles cast type anodised 150mm (ISI marked) complete all as specified and as directed.

S&F Galvanized wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

S&F 3.00mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.50.m in each pane complete all as specified and as directed.

S&F 15mm bore medium grade tubes, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old one complete all as specified and as directed.

S&F 20mm bore medium grade tubes, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old one complete all as specified and as directed.

S&F in repairs 15mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair 15mm chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair 20mm gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

M&L for preparation of surfaces of new wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed.

M&L for preparation of old Plastered surfaces including complete removal of existing treatment of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.

M&L including complete removal of existing treatment, preparation of old Plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed.

M&L for preparation of old surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for Mild steel TMT bars 8 to 10 mm dia bent to shape required including cranking bending and binding with M.S wire not less than 0.9mm dia complete all as specified and directed.

M&L for Form work to soffits of suspended slabs flat or batter such as roof slabs, floor slabs and similar work not exceeding 200 mm thick complete all as specified and directed.

M&L for Rough finished flat Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC complete all as specified and directed.

M&L for R.C.C 1:2:4 type B1 nominal mix (using 20mm graded crushed stone agg) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs complete all as specified and directed.

S&F 200mm size mild steel hook and eye(ISI marked) complete all as specified and directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) but including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F in repair PVC syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 450 x 300 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and cutting for pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repair of PVC connections 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.

S&F waste coupling of PTMT (half or full threaded) 32 mm dia (Min weight 45 gms)complete all as specified and directed.

S&F in repair of 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair 25 mm low density polyethylene (LDPE) pipe of pressure rating 6 kgf/sq.cm complete all as specified and directed.

S&F brass chromium plated toilet paper holder(white) complete all as specified and directed.

S&F in repairs vitreous China squatting pan ‘Orissa’ pattern size 580 x 440mm white , with integral foot rests including provision of lime concrete bedding ( excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair chromium plated shower roses with or without swiwel joints any size including fixing to steel pipe or union complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends of radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single,(Single T) equal or unequal of radius complete all as specified and directed.

S & F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

Supply only integral waterproofing compound complete all as specified and directed.

S&F in repair wash down water closet (pedestal pan) including connection to drain pipes and to flushing pipes antisy phonage pipe etc excluding flushing cistern incl flush pipe complete as as specified and directed.

SRI JAINATH SINGH