Renovation of Cement Mill Control Room

Amount

Dismantling of old wooden partition including stacking the same in proper place as directed by the Engineer-in-Charge with all incidental expenses etc., complete

Dismantling of old thermo coal ceiling including stacking the same in proper place and clearing away the debris within a distance of 150 m as directed by the Engineer-in-Charge with all incidental expenses etc., complete

Dismantling walls of any thickness with bricks or rubble in CM including stacking of materials useful for re-use and disposal of debris within a distance of 150 m etc. complete

Dismantling of old water closet including stacking the same in proper place as directed by the Engineer-in-Charge with all incidental expenses etc., complete

Dismantling of old Hand wash Basin including stacking the same in proper place as directed by the Engineer-in-Charge with all incidental expenses etc., complete

Dismantling of old Linolium sheet including stacking the same in proper place as directed by the Engineer-in-Charge with all incidental expenses etc., complete

Chipping and removing the cement plaster and disposal of the debris within a distance of 150 m etc., complete

Dismantling the existing doors / windows/ ventilators etc., by chipping masonry/ concrete and stacking the same in proper place as directed by the Engineer-in-Charge with all incidental expenses etc., complete

Laying/ fixing to proper lines and levels , vitrified / rectified floor tiles,with proper spacer of 3mm size and filling with tile paste/epoxy materilas (vitrified / rectified floor tiles, tile paste/epoxy supplied by MCL) ,in floors, dado, platforms etc., including all curves, edges and corners etc., over 12 mm thick 1:3 CM (1 cement, 3 sand), jointing with special mortar/ cement to match the shade of tiles cleaning etc., complete as directed by Engineer-in-Charge

Providing and laying/ fixing to proper lines and levels ceramic anti-skid floor tiles 300 x 300 mm size of approved shade and quality in floors, dado, platforms etc., including all curves, edges and corners etc., over 12 mm thick 1:3 CM (1 cement, 3 sand), jointing with special mortar/ cement to match the shade of tiles cleaning etc., complete as directed by Engineer-in-Charge

Providing and laying/ fixing first quality glazed tiles of approved make and colour for dado, wall, etc., including all curves and corners over 12 mm thick CM 1:3 (1 cement, 3 sand) joining with white/ colour cement etc., complete as per standard specification.

Providing and fixing 75mm thick V or E panels with GI Panels fixed on Floor and ceiling simulataneously and panels should be slides in to the channels and the joints between the panels should be filled the joining compounde etc excluding painting.

Supplying, fabricating and fixing suspended false ceiling with powder coated aluminium sections of approved brand and colour Aluminum L angle of size 25 X25X 1.50mm among the perimetre of ceiling, fixed to walls with pvc grips and screws, Aluminium Tees of size 25X25X1.5mm should be suspended from the roof with anchor bolts and GI wire,Aluminum Cross Tees fitted with siutable GI cleats using rivets at both ends should be fixed to main tees @610mm interval using steel screws to form a rigid grid of 610 X 610mm in true level and line, laying E or V board designer pannels of 6mm thickness including cutting, hoisting and fitting in position with necessary aluminium clips, etc, Painting with 2 coat putty, one coat primer and 2 coat premium emulsion of approved quality , shade & brand to give an even finish including preparing the surface etc. at all heights complete as per standard specification and as per approved drawing and specification including coat and conveyance of all materials to site and all labour charges etc complete as directed by Engineer in charge

Supplying and fixing fibre door with siutable frame for bath room /toilet, with fully pannelled shutter,suitable for fiixing door closer including all fittings,necessary hinges,aldrops,tower bolts, handle of ppproved make and quality etc. complete as per the directions of Engineer-in-charge.

Supplying and fixing half glazed fibre door with heavy frame of size 100mm X 75mm, siutable for fixing door closer with all fittings like necessary hinges, aldrops,tower bolts,handles ,locks of ppproved make and quality etcexcluding the cost of door closer as per the directions of Engineer-in-charge.

Providing and fixing pressed steel windows made out of 18G (1.25mm)thick prime quality CRCA steel/GI sheet using profiles 82 x 60 mm for window frame and 50 x 20 mm for window shutters welded or assembled with grill and fix 3 mm plain glass including all other fittings and painted with two coats of metal primer.

Providing and fixing European type earthenware white glazed water closet of approved brand with trap, seat and lid with CP brass hinges and rubber buffer with 15 litre PVC low level flushing system with fittings, fixing brackets, 32 mm flush pipe with fittings and clamps, overflow pipe with mosquito proof arrangement, one number 15 mm angle valve (Watertec) with connection (heavy duty) etc., complete including painting of brackets with suitable paint two coats, cutting and making good the walls and floor as per complete specification as directed by Engineer-in-Charge

Providing and fixing earthenware white hand wash basin of size 550 x 400 mm or nearest of approved brand with CI brackets, one number 15 mm pillar tape (Watertec), 15 mm angle valve (Watertec) with suitable PVC connection (heavy duty) etc., complete, painting of brackets with suitable paint two coats, cutting and making good the walls and floor as per complete specification as directed by Engineer-in-Charge

Providing and fixing casement windows, ventilators fabricated from unplasticized poly vinyl Chloride (uPVC) sections with Fixed glass using 6mm thick toughened glass,the profile of the section should be three chamber system which provides high insulation properties with outer frame size 60 X 58 mm with an outer wall thickness of 2.1mm and colur with white , the window will be designed with all corner joints mitred and fusion welded, window should be steel reinforced with 30X36mm steel reinforcement with a thickness of 1.23mm to have diamensional stability etc inlcuding all cot of materials, conveyance and labour as per approved drawing and specifictaions as directed by Engineer - incharge.

Painting with 2 coat putty, one coat primer and 2 coat premium emulsion of approved quality , shade & brand to give an even finish including preparing the surface etc. at all heights complete as per standard specification.

Supply of skilled Plumber to assist the department.

Supply of Man Mazdoors to assist the department.

Supply of skilled Mason[MAN DAYS] to assist the department

Providing and laying PCC 1:1½:3 (1 cement, 1½ sand 3 hard granite broken stone 20 mm and down) including finishing, consolidation, curing etc., complete