Providing and Erecting Road light with pole for Road Safety under Gandhidham Electrical sub division, Dist-Kachchh.

Name of Work :- Providing and Erecting Road light with pole for Road Safety under Gandhidham

Electrical sub division, Dist-Kachchh.

Quantities Estimated Rate

may be more or Description of Item.

No. In Figures In Words according to

1 86 Mtr. providing and erecting Mains with ISI marked, 1.5KV grade 56.56 Rupees Fifty Six

electrolyte multi stranded, annealed copper conductor with heat And Paise Fifty

resistant PVC insulated conforms to IS 694, IEC - 227 erected in Six Only

existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required.

(e) One wire 6.00 sq. mm

2 32 Mtr. (g) One wire 16.00 sq. mm 142.41 Rupees One

3 4660 Mtr. Supplying and erecting Flexible PVC insulated multi strand multi 46.46 Rupees Forty Six

core 1.1 kv grade ISI marked copper wires of following size to be And Paise Forty

erected as directed. Six Only

(e) 1.50 Sq.mm 3 core round PVC sheathed

4 546 Ea. Supplying and erecting LED street light / Flood light fittings with 6566.01 Rupees Six

High power White LEDs wattage of 3 Watt and above assembled on Thousand Five

single MCPCB, efficiency more than 130 lm/w and corrosion free Hundred Sixty Six

High pressure die cast aluminum housing with smooth finish powder And Paise One

coated and heat sink extruded aluminium with diffuser and Only

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection.

(iv) above 90 to 120 watts

5 16 Ea. Providing and erecting Approved make Four pole moulded case 6173.12 Rupees Six

circuit breaker having breaking capacity ICU of 25 KA. at 415 Thousand One

V,having normal current rating up to 25 A to 100A. with Fixed Hundred Seventy

thermal & magnetic release suitable to work on A.C. supply 50 c/s. Three And Paise

with all internal connections, spreader tinned copper & complete Twelve Only

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only

6 6.4 Rn.Mtr Supplying and erecting triple pole & neutral 440V / 500V panel 1961.42 Rupees One

mounting Copper Busbars with four equal Nos. of electrolyte bus Thousand Nine

having current density not more than 1.6 Amp. / sq.mm (Rated Hundred Sixty

current / cross section area) duly wrapped with colour insulating tape One And Paise

for phase sequence of following current carrying capacity, erected Forty Two Only

with necessary bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary connections.

(A) Suitable for 100 Amp. Capacity

7 422 Ea. providing and erecting Miniature circuit breaker single pole 0.5A to 270.68 Rupees Two

2A system and having breaking capacity 10 KA to be erected in Hundred Seventy

existing box. confirming to IS 8828/1996 with ISI Mark And Paise Sixty

Cat.III Eight Only

8 43 Ea. Providing & erecting 415V MCB Four Pole Switch for Lighting 578.73 Rupees Five

Load (B curve) having 10KA breaking capacity & confirms to IS Hundred Seventy

:8828 in existing box having following capacity Eight And Paise

(a) 6 to 32 Amp. Seventy Three

9 48 Kg Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 77.77 Rupees Seventy

SWG. Seven And Paise

10 16 Ea. Supplying & erecting earth pit of minimum bore dia.150mm size 4591.46 Rupees Four

approved make Earthing Electrode consisting Pipe-in-Pipe Thousand Five

Technology as per IS 3043-1987 made of corrosion free hot dipped Hundred Ninety

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron One And Paise

galvanising, Inner pipe dia of 25 mm having 200-250 Micron Forty Six Only

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be submitted

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

11 160 Kg Providing , erecting , fabricating the M.S. structure as per 77.77 Rupees Seventy

requirement on site incorporating proper size of M.S. Seven And Paise

angles,square,round, flats, bars, channels, sections complete with Seventy Seven

cutting, welding, grinding & finishing duly painted with one coat of Only

red oxide with erection on site as per direction of engineer in charge

with necessary grouting, cementing, plastering & finishing complete.

12 540 Mtr. Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 183.82 Rupees One

multistrand Aluminium conductor for 1.1 KV. to be laid on wall Hundred Eighty

with necessary clamps or in existing trench / pipe of following size Three And Paise

of cables Eighty Two Only

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

13 10068 Mtr. Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable 153.52 Rupees One

multistrand Aluminium conductor for 1.1 KV. to be laid on wall Hundred Fifty

with necessary clamps or in existing trench / pipe of following size Three And Paise

of cables Fifty Two Only

(A) 4 core 16 Sq. mm

14 9800 Mtr. Making trench in soft soil of suitable width of 90 cm deep for laying 55.55 Rupees Fifty Five

cable or locating the fault all over the run and back filling the same And Paise Fifty

and making the surface as normal ground. Five Only

15 727 Ea. Providing and, fixing heavy duty flange type brass cable gland with 47.47 Rupees Forty

rubber ring for PVC insulated armoured cable complete with out Seven And Paise

going tails, insulating tape etc for following size of cables. Forty Seven Only

(D) 2 to 4 core 16 Sq. mm

16 32 Ea. (E) 2 to 4 core 25 Sq. mm 51.51 Rupees Fifty One

And Paise Fifty

17 3036 Ea. Solder less crimping type Aluminium lugs conforming to IS suitable 15.15 Rupees Fifteen

for cable of following size evenly crimped with high pressure tool & And Paise Fifteen

connected to switchgear terminals with brass/cadmium plated nut Only

bolts in an approved manner.

18 342 Ea. Supply of approved make FRP Pole having following 16143.84 Rupees Sixteen

specifications: FRP Light Pole made by CNC filament winding Thousand One

machine using thermoset resin polyester/epoxy resin system) having Hundred Forty

minimum 62% glass content. The pole should be in one piece and Three And Paise

tapered round in shape, having smooth finish and should be totally Eighty Four Only

free from corrosion as well as non conductive & shock proof Pole

should be provided with FRP Anchor Base and it should be heavy

duty, or MS Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be

UV resistance and pigmented. A highly weather resistant

polyurethane coating shall be applied to the pole after applying

suitable primer system that ensures proper adhesion of the paint.

Minimum coating thickness shall be 80 to 100 micron. Deflection of

the pole shall not exceed more than 10% of the length of pole for the

given load“ Pole should be generally made as per the dimensional

data, performance criteria and some interchangeability features of

poles as per standard ANSI C 136.20 latest version or ASTM D

4923/01 including cable termination box with necessary accessories .

The size of pole and type of installation with foundation as per

manufacturer details and site requirement are as below .

(1) Suitable for base plate mounting single arm Bracket.

[J] Overall length of 7 Mtr.Average Thickness: 7.5mm. Top/ Bottom

OD Dia A/F 89/183 mm ± 2mm approx. approx. Weight of Pole

kg approx. (Without Base) Anchor Base (Size 300X300 & 18mm

19 342 Ea. Providing FRP/GRP arm bracket of having 15˚ arm with 50 mm OD 1900.82 Rupees One

pipe *5 mm thk,1000mm long from pole centre Thousand Nine

(A) Single arm bracket Hundred And

Paise Eighty Two

20 16 Ea. Supplying & erecting IP 55 grade following size section pillar 16691.26 Rupees Sixteen

fabricated from joint less M.S. Sheet with angle iron legs made from Thousand Six

jointless M.S. Angle with cable clamps to be buried in ground to Hundred Ninety

have appropriate erection to work uniform until erected with cement One And Paise

concrete foundation and 45 cm high bricks work finishing with Twenty Six Only

plaster etc. hinged double door internally supported on both side,

with internal and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and

other with nut and bolt for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three tank powder coated

paint. section pillar roof should be without joint with water leakage

proof & tested as per IP 55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS

Sheet with angle iron legs 95 cm long made from 40 X 40 X 6 mm

thick MS angle.

21 16 Sq.mtr Supplying and erecting HYLAM sheet on existing angle iron 771.64 Rupees Seven

frame.for following thickness Hundred Seventy

(B) 4mm One And Paise

Sixty Four Only

22 16 Ea. Supplying & erecting approved make Digital time switch having 3168.37 Rupees Three

lithium cell 6 years operative and operate battery backup 1 channel Thousand One

day clock with 14 memory programme, suitable to operate on 240V + Hundred Sixty

5%, 16A with, floating contacts Minimum switching setup time 1 Eight And Paise

minimum & LCD display. Also comprised permanent ON/OFF Thirty Seven Only

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required with

necessary connection erected as directed.

23 16 Ea. Supplying & erecting power contactor ,AC3 duty for time switch 857.49 Rupees Eight

complete erected as per direction Cat III Hundred Fifty

(C) 4 pole 440V 16 Amp. Seven And Paise

Forty Nine Only

24 48 Ea. Supplying and erecting approved make suitable panel indicator LED 43.43 Rupees Forty

type lamp, lens cover, complete erected with necessary connections. Three And Paise

Forty Three Only

In Words : Rupees One Crore Twenty Nine Lakh(s) Thirty Nine Thousand Six Hundred Sixty Six And Paise Thirty One

Note : This Estimate has been prepared on the new SOR which is exclusive of GST hence GST additional will be paid to

the agency as per existing guidelines.

I/We am/are willing to carry out the work at ____________% above/below (in Figures)__________________________

percent Above / below (in words) the estimated rates mentioned above amount of my\our tender works out as under :-

Estimated amount put to Tender Rs._________________

Deduct _____% below Rs._________________

(-)Less For Dismantle Material Rs._________________

Net Amount Rs._________________

Estimated amount put to Tender Rs. _________________

(-)Less For Dismantle Material Rs. _______________

Net Amount Rs. _________________

A I/We hereby declare that I/we have visited the site and fully acquainted my self / our selves with the local situation regarding

material,labour and other factors pertaining to the work before submitting this tender.

B I/We hereby declare that I/we carefully studied the conditions of contract, detailed technical specifications and other tender

documents of this work and agree to execute the same accordingly.

C Any Excess in Tender Item/Extra Item if Needs to be Execute. Contractors has to carry out on the instruction of Competant

Authority on Tender Submitted rate, No Excuse will be Accepted. Hence Contactors are Requested to quote the rate considering

this condition.

D Contractors are requested to quote the Tender by considering that payment will be made after availabilty of grant. Contractor has

to start the work immediately after issue of Work Order and as per instruction of Engineer in-Charge irrespective of availability

E This Estimate has been prepared on the new SOR which is exclusive of GST hence GST additional will be paid to the agency as

per existing guidelines.

(Signature of the Contractor) Deputy Executive Engineer

Electrical R&B Sub Division

Executive Engineer

Electrical R&B Division

Note 1 Please strike out whichever is not applicable.

2 In the case of tendered amount being quoted incorrectly the quoted pered percentage Below/Above will be considered