Construction of eco shop at Soochipara area under Meppady Range during 2025-26

Eco Shop

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms,lift up to 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level:1:2:4 (1 Cement:2 coarse sand(zone-II)derived from natural sources:4 graded stone aggregate 40 mm nominal size derived from natural sources)

Steel work in built up G I tubular(round,square or rectangular hollow tubes etc.)trusses etc.,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc.complete

Steel work for purlin/single section with G I pipes including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc.complete

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm(+0.05%),total coated thickness with zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge.The sheet shall be fixed using self drilling/self tapping screws of size(5.5x55mm)with EPDM seal,complete upto any pitch in horizontal/vertical or curved surfaces,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%)total coated thickness,Zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screwscomplete :Ridges plain (500-600 mm)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A,including jointing with seal ring conforming to IS:5382,leaving 10 mm gap for thermal expansion,(i)Single socketed pipes.110 mm diameter

Providing and fixing on for unplasticised Rigid including jointing with thermal expansion Coupler110 mm wall face unplasticised-PVC moulded fittings/accessories PVC rain water pipes conforming to IS:13592 Type A real ring conforming to IS:5382,leaving 10 mm gap for

Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete(aluminium frame work shall be paid separately)

Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement,trenghing,refilling &testing of joints complete as per direction of Engineer in Charge.25 mm đa 10KGF/cm2

Supplying and fixing 15mm PVC water tap superior quality like water tech including all cost etc.complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08%and conforming to IS: 15622,of approved make,in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement:4 coarse sand),including grouting the joints with white cement and matching pigments etc.,complete.Size of Tile 600 x 600 mm.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Providing and fixing cup board shutters with 25 mm thick veneered particle board IS 3097_marked, exterior grade (Grade I) , ofapproved make including-Ilnd class teak wood lipping_of 25 mm wide x 12 mm thicli with necessary screws and bright fin ished__stainless steel piano hinges, complete as per direciion of Engineeri in- Charge.With decorative veneering on one side and commercial vene6ring on other side