Provision of Ballast less Track 03 Nos. at Nanded station (Road 1-720m, Road 2- 720m and Road 3 - 700m)

Item Breakup - A1-DSR 2023

Item Breakup - A2-USSOR 2021

1440.00 wet mixing of naturally available suitable soil including additional blending with naturally available or manufactured material as required to achieve specified gradation, in designed proportion in Pug mill or wet mix plant to have uniform gradation including all incidental transportation, laying over finished formation in uniform layer(s) with motor grader, compaction with suitable vibratory roller to specified density and finishing to correct profile, complete as per RDSO Specification No. RDSO/2020/GE: IRS-0004 with latest correction slips. Supplying, laying Non-woven Needle Punched and Mechanically or Thermally bonded type Geotextile for use as Separator/Filtration for Railway formation as per RDSO Specification No. RDSO/2018/GE:IRS-0004 - Part I made of Polypropylene / Polyethylene / Polyamide or combination there of having apparent opening size of less than or equal to 85 microns and elongation at failure more than 50% in both directions including transportation labour, lead & lift complete as directed by Engineer in-charge.

2880.00 before laying blanketing layer with minimum strengths in Grab test, Trapezoidal Tear test and Puncture test of 700N, 250 N and 1800 N respectively. Conducting in-situ full size Plate Load Test (PLT) at selected location as per IS:1888 including making loading arrangements & casting of RCC/cast in-situ concrete footing as per codal provisions including excavation and refilling of trial pit.

Each NANDED DIVISION-ENGINEERING/SOUTH CENTRAL RLY Pulling & positioning of rails accurately on cess including supporting rails, providing required gap and squaring at ends for renewal preparation, as directed by Engineer in-charge.

RM Dismantling and removing rail of all section & length from track, laid on any type & density of sleeper by removing fish plates, fastenings & fish bolts and other materials including stacking all released materials within an average distance of 500 metres as directed by Engineer in-charge. Note: 1.Cutting of rails shall be paid separately. 2.Work to be done under traffic block.

RM Insertion of rails of all types & length in track, laid on any type & density of sleeper to the specified gauge under traffic block. Rates include fastening of rail with sleepers with standard set of fastenings and fixing of fish plates and bolts or, if required, providing gap for welding and stacking of released material without infringement within 250m as directed by Engineer-in- Charge. Note: Rail drilling and cutting to be paid separately.

4780.00 sleepers with contractor's grease, conforming to Railway's specifications, labour etc. complete as per procedure prescribed in latest edition of IRPWM. Gas cutting of rail of various sections with contractor's tools & plants, as directed by engineer in-charge :

78.00 block using Railway's welding portion & Welder and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing of weld in USFD test as directed by Engineer in charge. Note: 1. Only welding portion and related accessories as per Annexure - I and Welder shall be supplied by Railways. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 3. Required nos. of Joggled fish plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in-Charge after release from track. NANDED DIVISION-ENGINEERING/SOUTH CENTRAL RLY Providing Centre Line / Rail Level, reference Pegs on formation at an interval of 30 metres on one side or at centre of proposed / existing track, as directed by engineer in- charge for linking of new track / CTR / Deep Screening / Lifting / Lowering works, duly embedding in formation including marking with contractor's paint. Note: (1) Rails/tie bar of suitable size bar shall be supplied by the Railways from nearest Stores Depot. In case of hard wood peg, the hard wood will be supplied by the contractor. (2) Excavation and concrete work, if required, will be paid separately.

71.00 dia and 60 cm long Linking of BG track (except at LC, Bridges and SEJs) with any type of rail section and sleeper of specified density, on ballast bed spread and compacted with suitable roller, over prepared formation including leading free rails/welded panels available along the alignment on to formation, leading and spreading all fittings and fastenings, spreading of sleepers at specified spacing, squaring, placing of rails over sleepers and fixing rails to sleepers with all types of fittings and fastenings to correct gauge & alignment, lubrication of fittings and fastenings with contractor's grease as per IRPWM standards with contractors labour, tools, consumables, with all lead, lifts etc. complete and raising, levelling and initial packing of track to make it fit for 30 kmph and meet other prerequisites prescribed in Indian Railway Track Machine Manual for deployment of Tamping Machine. Note: 1.Rail cutting and Hole drilling shall be paid separately. 2.Spreading of ballast and compaction shall be paid separately under relevant item.

2130.00 Anti-corrosive painting of rail outside track on rail bottom, web, foot and fishing plane with two coats of thickness of 100 microns each by bituminous black paint confirms to IS-9862 of reputed make including surface preparation, as a complete job as per procedure prescribed in latest edition of IRPWM.

RM Quick cutting with abrasive rail cutter of all types of rail sections including wear resistant, head hardened rails up to 110 UTS, with contractors tools & plants, equipment, consumable with all lead & lift etc. complete as directed by Engineer in- charge. Abrasive Rail Cutter will be as per RDSO Specification No. TM/SM/1 (Rev. 01 of 2012) with latest status of RDSO; Rail Cutting Wheel Abrasive Disc will be as per RDSO Specification No.TM/SM/2 (Rev. 01 of 2020)

Each NANDED DIVISION-ENGINEERING/SOUTH CENTRAL RLY Drilling holes of 16 mm to 32 mm dia. with Rail Drilling machine including chamfering with appropriate chamfering tools in all types of rail section with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Rail Drilling Machine will be as per RDSO Specification No. TM/SM/3, dated 24.04.1991.

Each Loading of rails of any section and length up to 13 metres in Wagons / Truck / trailer including lead up to 50 metres and lift up to 5 metres.

270.00 possible and traffic block is not required or in Truck/trailer. Loading of tongue rail, stock rail, switch assembly and crossings of any section and length, SEJ, Glued joint etc. with / without P.Way fittings and fastenings, in Wagon / Truck / trailer including lead up to 250 metre and lift up to 5 metre.

21.90 possible and traffic block is not required or in Truck/trailer. Loading, leading and unloading of 52Kg / 60Kg rail up to 13 metre length by Railway's Rail Dolly / Dip Lorry to the nominated location under traffic with line protection in case road carriage is not possible with different lead with a lift up to 5 metre during block period.

280.00 Loading, unloading and hauling of 52Kg / 60Kg rail more than 13 metre and up to 39 metre length by Railway's Rail Dolly / Dip Lorry to the nominated location under traffic and line protection in case road carriage is not possible for different leads and lift up to 5 metre.

280.00 Unloading of rails of any section and length up to 13 metre, in neat manner for Railway usage from departmental material train (DMT) or contractor's / Railway's Truck/trailer including lead up to 50 metre, lift up to 5 metre and stacking in prescribed manner.

280.00 possible and traffic block is not required or in Truck / trailer. Unloading of all type of rails of length 130 metre and beyond from end unloading rake and keep the panels in head-up position at specified distance from centre of track clear from any infringement.. Note: Contractor has to keep Oxygen and Acetylene gas with cutter as standby during the period of work.

MT NANDED DIVISION-ENGINEERING/SOUTH CENTRAL RLY Loading of 52kg / 60kg PSC line and special sleepers beyond 2.75 metre length including existing fittings and fastenings in Depot / Station / Mid-section between stations in a neat manner to departmental material train (DMT) or contractor's / Railway's Truck/trailer with crane or any other means including crossing of one track with free lead up to 250 metre and lift up to 5 metre, if required with contractor's labour, tools & plants, machinery, consumables etc. Note: In case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied.

17.05 handling is possible and traffic block is not required. Loading, leading and unloading of all types of P.Way fittings and all other miscellaneous material except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: Lead shall be the shortest motorable road length between the points of loading and unloading.

7500.00 over item no. 172047 Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: 1 . Lead shall be the shortest motorable road length between the points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items.

35760.00 over item no. 172057 Unloading of 52kg / 60kg PSC special sleepers beyond 2.75 metre length in Depot / Station / Mid-section between stations in neat manner for Railway usage from departmental material train (DMT) or contractor's / Railway's Truck/Trailer with crane or any other means including crossing of one track and lead up to 50 metre & lift up to 5 metre with contractor's labour, tools & plants, machinery, consumables etc. Note: In case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied.

MT NANDED DIVISION-ENGINEERING/SOUTH CENTRAL RLY Unloading of Switches / Crossings / SEJ Rails / Glued Joints of any rail section and length with or without P.Way fittings & fastenings in neat manner for Railway usage from departmental material train (DMT) or contractor's / Railway's Truck/Trailer with lead up to 250 metre & lift up to 5 metres.

MT Erection or removal of temporary Engineering Indicator Board or any other board at specified locations without causing infringement to track etc. complete and as directed.

Each Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.

400.00 with minimum 1.10 cum bucket capacity

500.00 crane of 12T capacity for misc. works of handling of material Total 4644709.23

Item Breakup - A3-NS items

Dismantling of existing track with rails Per 90R/52Kg/60Kg on PSC sleepers of Track 52Kg/60Kg including leading & stacking of Metre all released materials, sleepers, fastenings, rails, disposal of debris at nominated locations, including segregating the relased materials class wise in a neat and countable manner, with all lead & lift, clear of infringements, crossing of track. The rate also includes transporation of released fittings to SSE/P.Way store and stacking, complete job as directed by Engineer in- charge. ( Note: Relevent items like removal of ballast/ dismantling of CC/RCC to paid seperately.)

Shifting of twin precast blocks up to 1.00 Each Km and fixing them as sleeper in the washable apron at appropriate level and track alignment before concreting of apron. Rate includes straightening of extender rod and binding them with reinforcement steel of apron, putting precast level blocks etc. complete Job

Linking of track along the proposed Per alignment as per standard drawing with Track 90R/52 Kg and PSC sleeper with (M+7) Metre sleeper density including correct spacing of sleeper, gauge, alignment, X - Level, crossing under super elevation of curved track. All P.Way material are to be arranged by Railways. NANDED DIVISION-ENGINEERING/SOUTH CENTRAL RLY

Providing laying special concrete M -40 in cum between sleeper from P.F. wall to the drain with special cement material and stone aggregate . The special cement material will be rapid hardening, high early strength gaining non shrinkaable chloride free type having grain size of less then 0.2mm. The concrete will be made mixed with stone aggregate of 15mm to 12mm down size IS siev e and course sand with a gradient of 1 in 40 with mix design given by the contractor to give a minimum compressiv e strength of 170kg to 200 kg. / Sq CM in 4 hours, 300 kg / Sq CM in 24 hours and 400 kg / Sq CM in 21 days. The work will be carriedout including base preparation, cleaning of all loose materials by high pressure compressed air water jet with all contractor's labour, materials & equipments tools & plants complete with provision of gap below sleeper to avoid center binding upto satisfaction of Engineer-In-Charge.

Supply and manufacturing of Canted Partly Numbers 3552.00 casted rail seat beam (PCRSB) Sleeper including materials & labor in line with BLT- IFS drawings issued by RDSO of Indian Railway. This item is to be procured from any Concrete Sleeper Plant (CSP) on IR.

Providing, hoisting and fixing in position cum (With Cement Mortal of Ratio 1 Cement : 2 Mortar) M25 Grade Reinforced cement concrete in Precast standard Platform wall sections, including the cost of centering, shuttering, finishing, Admixtures in recommended proportion (as per IS 9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability including the cost of cement but excluding the cost of steel reinforcement, as per approved plan & as per direction of the Engineer in-charge. This item includes all lead, lift, men, material (except Reinforcement Steel) and taxes. This item includes cement quantity of 3.35 quintal per Cum for M25 Grade Precast Concrete. This item also includes 0.1 quintal cement for cement mortar. Any extra/less cement used than specified will be payable/ recoverable separately. 20mm nominal size of aggregate is to be used. No payment for cement mortar to be paid separately.

Providing standard jigs and fixtures minimum 25 nos. Track For execution of concrete of washable Metre aprons with track of ordinary PRC sleepers/shallow depth sleeper/partly cast sleepers. Fixing jigs and fixtures at recommended spacing on to the linked track. Lifting the track to the required level using jigs and fixtures. Correcting alignment both vertical and horizontal of the lifted track using jigs and fixture, to ensure track parameter as per IRPWM and making the track ready for casting of jigs and fixtures, all labour tools and plants, removing and refixing of jigs and fixtures for taking up concreting of next stretch, all taxes duties. GSTs etc. complete. NANDED DIVISION-ENGINEERING/SOUTH CENTRAL RLY

Providing and fixing of adjustable MS jack Numbers 7436.00 (from 250mm to 400mm) below rail flange to maintain rail level, including rebate for released top MS adjustable part which is contractor's property and including all labour, T&P, all taxes as a complete job. Nothing extra will bepaid to this effect whatsoever the case may be.

Supply & fixing Glass Fiber of 12mm length cum in concrete of Grade M-40 @ 600 GM/CUM for controlling surface cracks in concrete. Fiber glass shall be mixed in concrete mixer before placing concrete. The work includes supply of fibre glass, mixing and placing of concrete. The rate includes cost of material, labour, GST etc. nothing extra shall be paid. The contractor has to arrange the material at site.

Supply & applying Epoxy based concrete Sqm bonding agent (Nitobond EP of M/s FOSROC or similar product) as per provision of clause 4.4(ii) of guidelines for construction of ballastless track with indigenous fastening system for washable apron over sides of PCRSB up to slab mark level. The concrete bonding agent shall be applied with full precautions @ 4 liter/sq-m. Before application, the surface shall be cleaned thoroughly by removing dirt, dust or any unsound material. Before applying, the Base and Hardner should be thoroughly mixed to get a uniform colour. The rate includes cost of material, labour, T&P and other incidental charges. Nothing extra shall be paid. The rate also includes GST/other taxes paid.

Supply & application of polyeurethene Sqm coating over extruded polystrene board provided in gaps of 100mm as per RDSO drawing No. "T-8778". The work include supply of of polyurethene compound, application in two coats. The second coat shall be applied after drying of first coat.The coating shall be done @ 2.4 Ltr/SQM. Thickness of coating after drying shall be about 2mm. The rate include cost of material , labour required for application, transportation charges and government taxes as applicable. Nothing extra shall be paid. The work include crossing of running track. The work is to be carried as per satisfaction of site engineer.

Supply & Providing panel gap of 100mm Sqm with closed cell extruded polystrene rigid board of high compressive strength (Min 60psi) of 100mm thickness as per RDSO drawing no. "T- 8778". The work include supply of board at site of work, cutting as per site and fixing in the panel gap of 100 mm. The rate include cost of material , labour required for cutting and fixing in position, transportation charges and government taxes as applicable. Nothing extra shall be paid. The work include crossing of running track. The work is to be carried as per satisfaction of site engineer. NANDED DIVISION-ENGINEERING/SOUTH CENTRAL RLY

Supply & providing Silicon Sealant as per Running RDSO drawing No. "T- 8305". The work Metre include supply of material to site and filling all round at corner/junction of PCRSB and RCC slab over the 10mm groove. The rate include cost of material , labour required for filling, transportation charges and government taxes as applicable. Nothing extra shall be paid. The work is to be carried as per satisfaction of Site Engineer.

Supply & providing Polyurethene Sealant as Running per RDSO drawing No. "T- 8305". The work Metre include supply of material to site and filling at the corners between U-shaped PU coating and rigid board in 100 mm panel gap. The rate include cost of material , labour required for filling, transportation charges and government taxes as applicable. Nothing extra shall be paid. The work is to be carried as per satisfaction of Site Engineer.

Supply and providing 5mm Intermediate Per Eva Pad (T-8774), 10mm PU base pad Sleeper (T8775), Canted SGCI Bearing Plate (T- 8769), GFN-66 Insulating bushes/ Eccentric Bushes (T-8771) , Helical Spring (T-8773), GFN-66 Insulating T-Headed Washer (T8771), Anchor Bolt (T-8770), Hexagonal Nut (T-8770), 6.2 mm thick CGRSP (T-8795) , GFN-66/HVN-66 Insulating Liners (RDSO/T- 8796) in line with BLT-IFS drawings issued by RDSO of Indian Railway. The materials to be procured from RDSO approved vendors. The rate include cost of material , labour required for fixing the Canted SGCI Bearing Plate with PCRSB in position,supply of material at site,loading & unloading, transportation charges and GST etc., as applicable. Nothing extra shall be paid. The work include crossing of running track. The work is to be carried as per satisfaction of Site Engineer.

Supply and providing wider prestressed Per concrete sleeper (T-8970) - 1 No. with Sleeper Inserts (T-6901) - 4 Nos. and Dowels (T- 3002) - 4 Nos., Under Sleeper Pad for PSC sleeper - 1 set, and Rail Screws (T-4153) - 4 Nos. The materials shall be procured from RDSO-approved Concrete Sleeper Plants, and the Under Sleeper Pad for PSC sleeper shall also be procured from RDSO-approved firms. The rate includes the cost of labour required for fixing dowels in position, supply of materials at site, loading and unloading, transportation charges, GST, etc., as applicable. Nothing extra shall be paid. The work includes crossing of running track and shall be carried out to the satisfaction of the Site Engineer. Total 111779060.72