CSR

Augoring and boring of holes in site and under reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with augoring and boring equipment as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of different diameter , inclding VRCC M- 25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges , seigniorage charges for finished item of work, including centering, shuttering. Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST for 300mm dia D/U piles for Toilets.

Supply and placing of the VRCC M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing., complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Grade Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Plint Beam

Supply and placing of the VRCC M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing., complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Grade Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Columns

Supply and placing of the VRCC M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing., complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Grade Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Lintels.

Supply and placing of the VRCC M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing., complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Grade Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST for Sunshades

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls for Superstructure Walls Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Basement over plinth beam

Supply and fixing of Wood polymer composite (WPC) shutter of size 0.75x 2.10 mt with 28-30mm thick WPC with frame Door Frame section of 45x75 MM including cost and conveyance of all materials and labour charges as per specifications (APSS NO.1001 & 1002) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST for shutters

Supply and fixing of Wood polymer composite (WPC) shutter of size 0.75x 2.10 mt with 28-30mm thick WPC with frame Door Frame section of 45x75 MM including cost and conveyance of all materials and labour charges as per specifications (APSS NO.1001 & 1002) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST for Frames

Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:6:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST for Toilet Bed

Cost and supply of MS Grills including cost and conveyance to work spot and fabrication charges of steel like cutting rods, welding grills placing in position etc., complete. Including Overhead charges & Contracto'rs Profit @ 13.615% but excluding seigniorage charges & GST

Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove. Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Providing High Yield Strength deformed bars Fe 500 grade of different diameters, cutting and bending to required sizes and shapes, placing in positing with cover blocks of approved materials and size, tying firmly with M.S. binding wire,forming grills for reinforcement work as per approved design and drawing to be supplied at the time of execution of work including cost and conveyance of D forms bars, and all wastage such as over laps, couplings, welded joints, chair,s spacer bars, bidning wire, cover blocks and all operational incidental, labour charges such as cutting, bending placing in position, tying etc., complete for finished item of work, (Payment will be made on the basis of weight of fabricated deformed bars only) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure -10Sqm including oover head charges and Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Flooring with Ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and tiles etc., complete, excluding seigniorage charges, etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST for Toilets

Providing dadooing to internal walls to 15 cm height/risers of steps with 7.30 mm thick Ceramic tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Shahabad stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for interior walls including Overhead charges & Contractor's Profit @13.615% etc.complete but Excluding Seigniorage charges & GST for Interior walls (Inside)

Painting to New walls with two coats of Plastic Emulsion paint of of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors external wallsIncluding Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST for external walls (Out side).

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'P' trap including cost & conveyance of all material to work site, all labour charges for all operations for fixing etc., complete for finished item of work.Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 withwaste fittings like rubber plug, chain,32 mm nominalC.P. Fitting with parallel pipe thread conforming to IS:2963- sizebrackets including wooden block: 660 x 460 mm - Single C.P. Pillar cock including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 3"x3" (76 mm x 76 mm) - 8 Gauge including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST for Bio fencing.