REPAIR TO ROOF SUNKEN SLAB LEAKAGE SEEPAGE IN DOMESTIC AREA AT AF STN NALIYA

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specificallly provided complete all as specified and directed.

M&L for providing cement concrete (1:5:10), type E-2, using 40mm graded stone aggregate as in sunken portion of WC/toilet/bath complete all as specified and directed.

M&L for rendering 10mm thick, in cement mortar (1:3) on concrete/brick work of sunken portion, mixed with Dr Fixit pidiproof LW+ or equivalent @ 200ml/50Kg of cement complete all as specified and directed.

M&L for applying two coats of flexible polymer acrylic water proofing coating, 1mm thick (Dry film in two coats) using Dr Fixit pidifin 2K of M/S Pidilite Industries or equivalent including necessary pond testing in sunken portion complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed..

M&L for non skid coloured ceramic tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles,laid over 15 thick screed bed in cement mortar 1:6 and set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

M&L for coloured non skid/matt finish ceramic tiles, 7 to 8 mm thick, (square/ rectangular), area of each tile exceeding 0.11 sq.m but not exceeding 0.18 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300 x 200 x 7mm thick on vertical surfaces such as skirting/dado, set and jointed in neat cement slurry and pointed in coloured cement to match over and including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

S&F glazed, coloured ceramic tiles of size 350 x 250mm x 7mm / 450mm x 350mm x 7mm thick on vertical surface such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm sqr with all fittings and fixed to walls and ceilings or laid in floors for 15 mm bore of pipe including taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm sqr with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe including taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm sqr with all fittings and fixed to walls and ceilings or laid in floors for 25 mm bore of pipe including taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

S&F in repair, 40mm bore low density polythene pipes (LDPE) of pressure rating 6 kgf/sqcm fixed to walls, ceilling or in floors etc. complete all as specified and directed.

S&F in repairs vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to flushing pipe, ''P'' trap set in and including concrete and making good to floor complete all as specified and directed.

S&F in repairs vitreous china, semi-pedestal pattern ( Anglo- Indian type), white (excluding fixing bolts flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, pedestal pan and trap including connection to drain, complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. complete all as specified and directed.

S&F in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.

S&F in repairs, PVC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for Anglo Indian WC/ English WC as in repairs complete all as specified and directed.

S&F in repair, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note :- Supply only pillar taps, brass waste fittings, PVC connection and waste pipe shall be measured and paid separately.

Supply only pillar taps cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.

S&F in repair, pillar taps cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.

Supply only 32mm dia waste coupling of PTMT (half or full threaded ) minimum weight 32mm - 45 grams complete all as specified and as directed.

S&F in repairs 32mm dia waste coupling of PTMT (half or full threaded) minimum weight 32mm- 45gnms complete all as specified and as directed.

Supply only 32mm bore, flexible PVC waste pipe, 45cm to 60cm long for WHB & sink complete all as specified and as directed.

Supply only PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair, PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs 32 mm dia., Waste fittings, brass chromium plated for stainless still sink, etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs, vitreous china bowl urinal flat back, of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F, 40mm bore, flexible PVC waste pipe with waste , 45cm to 60cm long for urinal complete all as specified and as directed.

S&F in repairs brass CP Jet spray (Butterfly) with 1Mtr tube complete all as specified and directed.

S&F in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.

S&F in repair, 15mm bore, bib taps, cast copper alloy, chromium plated with capstain heas, fancy type, screwed down for iron/PVC pipes or union complete all as specified and directed.

S&F in repair, 15mm bore stop valves, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F in repair, 20mm bore stop valves, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 20mm bore complete all as specified and directed.

S&F in repair, stainless steel sink with drainage board made out of, 1.0mm thick for kitchen or laboratory with plugs, washers and wastes bedding in cement mortar to dwarf wall or including fixing contilever brackets and connecting union to pipe overall size 915 x 460 mm with bowl size 410 x 330 x 160mm complete all as specified and directed.

S&F in repair, plate rack of overall size 24" x 24" x 10 inch made out of 0.63mm thick stainless steel sheet complete all as specified and directed.

Taking down PVC pipes including all fittings like shoes, bends, swan necks etc of any dia complete all as specified and directed.

S&F 110 mm dia bore PVC (SWR) pipe , single socketed laid in trenches/floors ,in any length with rubber ring joints complete all as specified and directed.

S&F 110 mm dia bore PVC (SWR) pipe ,single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC 75mm dia (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F PVC (SWR) bend any radius for 110 mm bore pipe incl jointing material complete all as specified and directed.

S&F PVC (SWR) bend any radius for 75 mm bore pipe incl jointing material complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal for 110mm dia bore incl jointing material complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal for 75mm dia bore incl jointing material complete all as specified and directed.

S&F PVC (SWR) branch piece, double (double Y) equal or unequal for 110mm dia bore incl jointing material complete all as specified and directed.

S&F PVC (SWR) branch piece, double (double Y) equal or unequal for 75mm dia bore incl jointing material complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal for 110mm dia bore complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal for 75mm dia bore complete all as specified and directed.

S&F PVC (SWR) vent cowl equal or unequal for 110mm dia bore complete all as specified and directed.

M&L for 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 150 x 150mm stainless steel grating fixed on floor /Nahani trap in repair complete all as specified and directed.

S&F 150x150mm salt glazed stone ware gully trap ’P’ type grating fixed in repair in PCC 1:2:4 type B1 30x30x30cm with steel grating complete all as specified and directed.

S&F, 100 dia PTMT grating doom over Nahani trap and floor trap complete all as specified and directed.

Taking down cement plaster on brick walls etc including racking out joints, hacking for key, scrubbing down with water etc as directed complete all as specified and directed.

M&L for precast cement concrete block masonary walling with solid blocks of PCC (1:5:8) using 20mm graded stone aggregates, exc 10cm in width and sett in cement plaster (1:6) including demolition of brick work / stone boulder masonry built in cement mortar complete all as specified and directed.

M&L 10mm thick cement plasters in CM 1:6 on concrete or brick wall surfaces complete all as specified and directed.

M&L for 15 mm rendering in two layers with 10 mm with CM 1:6 & 5 mm thick with CM (1:4) with using water proffing compound on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified (Note WPC paid seprately.)

M&L rendering 5mm thick on concrete surface of ceiling in CM 1:3 finishing the surface fair and even complete all as specified and directed.

M&L Preparation of new plastered surfaces of ceiling and applying 3 coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of new wall surfaces and applying two coats of oil Bound Distemper over a coat of primer complete all as specified and directed.

M&L applying two coat of cement paint on wall including preparation of new surfaces of walls complete all as specified and directed.

Cutting around pipe 110mm bore and open the lekage joint and repair with cement morter 1:1 with water proofing compound and making good the surface with CM 1:3 and touch with cement base paint(externally from first floor to third floor complete all as specified and directed.

ditto as item no 63.00 but for 75mm dia pipes complete all as specified and directed.

Applying evenly a tack coat of industrial Bitumen 85/25 at the rate of 1.2 kg per Sqm includingcleaning surface in sunken portion complete all as specified and directed.

S&F Ball valves in repair high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Min wt 142 gms) (bore dia 15mm) complete all as specified and directed.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Min wt 210 gms) (bore dia 20mm) complete all as specified and directed.

M&L for machine cut kota stone slab in patch work 20-25 mm thick over cement screed base 15 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match with the shade of slab including grinding polishing complete all as specified single piece of stone on steps shall be provided complete all as specified and directed.

M&L for 15 mm thick screed bed or beading layer CM 1:6 for laying floor finishes complete all as specified and directed.

M&L 20mm thick Granite (of any type) pre-polished in cooking platforms and like fixed with neat cement slury over 15mm thck cement mortar (1:4) including pointing using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Granite (of any type) tiles 12mm thick machine cut, jet black bedded and joined with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing type in cill of windows and in walls including 10 mm thick backing in CM 1:4 complete all as specified and directed.

Excavating in post holes (or similar holes) in soft or loose soil each not exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surface complete all as specified and directed.

Dismantaling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F Rolled MS in joist channel angle or tee section fixed independently without connecting plates etc( cut to ordinary lengths ie ,with in 20 mmof length indicated with Fe 410.0 or Fe-250 complete all as speciafied and directed.

S&F of rolled mild steel plates (plain or chequered), channels, square cut or notched, forming holes, with rivetted, bolted or welded attachment of grade conforming to Fe 410-W-(Gde -E-250) Quality A complete all as specified and directed.

S&F for MS work as in post, purlins, fastenings, bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc. complete all as specified and directed.

M&L applying two coat synthetic enamel paints on new steel surfaces including preparation of new painted steel surfaces complete all as specified and directed.

Dismantaling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

M & L for PCC(1:3:6) in type C-2 in foundation /filling mass concrete complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coated GI based corrugated steel sheeting of 0.50 mm thickness of any colour having tensile strength of 550 mpa as in roof covering/ cladding to wall fixed with self tapping screws including curved facia complete all as specified and directed.

S&F of mild steel bolts of dia 16 to 20mm with hexagonal or square heads at one end and screwed the other end, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, nt exc 5 Cm long complete all as specified and directed.

Demolition cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), incl chequred tiles complete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub base finished even and fair complete all as specified and directed.

M&L in repairs for factory made machine pressed precast concrete, rubber moulded, interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade fixed with grey cement and pigment over 25mm thick sand cushioning complete all as specified and directed.

M&L sand filling under floor/pavement or in foundation including watering and consolidation complete all as specified and directed.

Taking down chowkat or frames not exc 1.5 sqm each with shutter(without taking of shutters from the frame) and removing from MD land complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified and directed.

S&F PVC solid door frame factory made size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced, with MS square, supplying and fixing in opening as per specification complete all as specified and directed.

S&F stainless steel butt hinges medium weight with stainless steel pins 100mm long complete all as specified and directed.

S&F 150mm aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directed.

S&F 150 mm long aluminium, anodized barrel tower bolts of extruded section and fixed (ISI Marked) complete all as specified and directed.

S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples rate including taking down aluminium/wooden door/ windows of any size and refixing to same frame with all fixtures and screws as required to replacemet/ repair of window complete all as specified and directed.

Disconnecting existing PVC water storage tank of capacity exc 500 ltrs & not exc1000 Ltrs, setting aside (or lowering if required) for repairs. cleaning, etc and hoisting if required reconnecting and refixing in position complete all as specified and directed.

Dismantling of water tanks exc 250 and n. exc. 500 ltr.

Dismantling of water tank exc 500 and n.exc 1000 lt.

S&F 1000 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted complete all as specified and directed.

S&F 500ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted complete all as specified and directed.

Complete removal of existing water proofing treatment from top of roof and canopies/ chajjas of buildings including removing the debris out side of MD land complete all as specified and directed.

M&L for Providing cement concrete (1:2:4) type B-0 (using 12.50 mm graded stone aggregate) laid on roof in adequate slope complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster in cement mortar 1:3 on roof slab/ canopies/chajjas with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions and make surfaces to receive water proofing treatment, finished even and smooth without using extra cement complete all as specified and directed. (Note:- water proofing compound will be measured and paid for separetaly as supply only)

Supply only integral water proofing compound complete all as specified and directed.

M&L for cutting out cracks to 'V' section in existing roof or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L for preparing, clean and dried plastered roof surfaces and applying APP modified water proofing membrane with non woven polyster reinforcement/ mat not less than 3mm thick having weight not less than 3.5 kg/sqm over a coat of bituminous filler/ primer @ 250 gm/sqm conforming to IS 3384-1986 through approved applicator and applying bitumenious aluminium paint @ 100gm/sqm on top of APP membrane all as per manufacturer's instructions complete all as specified and directed.

NEELKANTHA ASSOCIATE