SDSTPS

Earthwork excavation in loamy, clayey and sandy soils including removal of stumps and other deleterious material and disposal upto a lead of 50 m, for water supply and sanitary lines and where ever necessary and backfilling the trenches with excavated material etc., complete for finished item of work as directed by the Engineer-in-charge. Trench work excavation and backfilling shall be as per APSS 1317.

Laying Plain Cement concrete (M 20) Nominal Mix using 20mm & 12mm metal using concrete mixer after providing pipes, traps etc., wherever required, the rate includes cost and conveyance of all materials but excluding cost of cement (Cement will be supplied by department), labour charges and clearing away the debris etc., complete for finished item of work as directed by the Engineer-in-charge. PCC 1:2:4 work shall be as per APSS 402.

Brick Masonry in CM(1:6) by using well cured FLY ASH SOLID BRICKS of size 225 mmx 100 mm x60 mm(or) 230*110*70mm with 50kg/cm2 compressive strength, the rate includes cost and conveyance of all materials but excluding cost of cement (Cement will be supplied by department), labour charges, curing and all leads & lifts etc., complete for finished item of work as directed by the Engineer in Charge. Flyash bricks shall confirm to IS 12894:2002 RA 2017, Brick masonry work with CM 1:6 shall be as per APSS 504.

Providing 12 mm thick plastering to walls with CM (1:6) including cost and conveyance of all materials but excluding cost of cement (Cement will be supplied by department), Labour Charges, Curing at all leads and lifts etc., complete for finished item of work and as directed by the Engineer-in-Charge. Plastering work with CM single coat shall be as per APSS 903.

Tiling with Edge cut rectified ceramic glossy finish floor tiles /Anti skid tiles/Daddoing Tiles of size 450X450 mm for flooring, 300 mmx 300mm for toilets flooring and 8 mm thick of approved make & quality of all shades set over base coat of cement mortar (1:5), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials but excluding cost of cement (Cement will be supplied by department), all labour charges, T&P etc., complete for finished item of work as directed by Engineer-in-charge. Ceramic floor tiles shall confirm minimum to IS 15622-2017 class GroupBIIa, glazed, Skid-resistant and rectified. Ceramic wall tiles shall confirm minimum to IS 15622-2017 class Group BIII Glazed, polished and rectified. Laying/ fixing of tiles work shall be as per APSS 707.

Supply, cutting, bending and fabrication of reinforcement with HYSD/TMT bars including cutting, bending, placing in position and tying/welding wherever necessary for RCC works , the rate includes cost and conveyance of reinforcement steel, binding wire and all other materials but excluding Reinforcement steel will be supplied by department for free of cost, all labour charges, all leads and lifts etc., complete for finished item of work as directed by Engineer-in-charge. Reinforcement work shall be as per APSS 403.3 and APSS 403.4.

Laying R.C.C in M20 grade Nominal Mix using 12mm to 20mm size well graded HBG metal and a minimum cement quantity of 400 Kg per Cum for Cover blocks and other RCC Works, the rate includes cost and conveyance of all materials but excluding cost of cement (Cement will be supplied by department), labour charges, shuttering, vibrating charges, machine mixing charges, curing, all leads & lifts etc., complete for finished item of work as directed by the Engineer-in-charge. M20 concrete shall confirm to APSS 402. RCC work shall be as per APSS 403.

Painting to walls with One coat of ready mixed oil bound washable distemper acrylic based of approved colour and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including conveyance of all materials to work site, all operational, incidental, labour charges etc., complete for finished item of work as directed by the Engineer-in-charge. Distemper painting work shall be as per APSS 911.

Painting to the External walls with One coat of emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including conveyance of all materials to work site, all operational, incidental charges, labour charges etc., complete for finished item of work as directed by the Engineer-in-charge. Plastic emulsion painting work shall be as per APSS 1216.

Painting to the external walls with one coat of primer using cement paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, the rate includes conveyance of all materials to work site, all operational, incidental charges, labour charges etc., complete for finished item of work as directed by the Engineer-in-charge. Painting walls with cement primer shall be as per APSS 912.

Painting to old Iron works like Gates, Grills, Hand Rails, door frames etc., with synthetic enamel paint of approved quality in Two coat's over one coat of primer, the rate includes cost and conveyance of all materials, brushes, all labour charges, all leads & lifts, etc., complete for finished item of work and as directed by the Engineer in charge. Painting on iron works with synthetic enamel paint shall be as per APSS 1212.

Clearing of Shrub and light jungle (more than 50 percent open space) including bushes upto 30 cm / parthenium and other weeds including burning or disposing off the same in pinakini colony of SDSTPS Township and where ever necessary, the rate includes all labour charges, T&P etc., complete for finished item of work as directed by the Engineer-in-charge. Jungle clearance shall be as per APSS 201 and APSS 1405.

Attending repairs by welding of Petty Iron works for complaints accumalated like on full day basis with minimum 1Welder and 1helper, for damaged hinges of door frames/grills/railing pipes/main gates steel table etc., the rate includes hire charges of welding machine, cost of electrodes, all incidental charges, all labour charges etc., complete for finished item of work as directed by the Engineer-in-charge.

Supply, fabrication and erection of hand railings in balconys, staircases, terrace parapet walls etc ., where ever damaged and necessary with GI round/ square pipes (hollow bars) GI pipe medium grade as per IS 1239 part1:1990 & IS4736:1986, the rate includes cost and conveyance of all materials like GI pipes of required sizes, all labour charges for fabrication, erection charges at all heights and painting with two coats of epoxy Paint over a single coat of epoxy Primer etc., complete for finished item of work as directed by the Engineer-In-Charge. Painting work shall be as per APSS 1207 and APSS 1212.

Laying ,Fixing, Allignment & Jointing of 315 mm Dia/200mm /160 mm dia HDPE PIPES, 6 Kg/ sqcm (PE-100 grade) confirming to IS 4984- 2016 by butt fusion welding as per IS :7634-P-II/2012 as amended from time to time to the alignment and gradient and testing the line to the required pressure,the rate includes hire charges of butt fusion welding machine, all labour charges, hire charges of T&P etc., complete for finished item of work as directed by the Engineer -in-charge. (HDPE pipes will be issued by dept. at free of cost)

Laying ,Fixing, Allignment &Jointing of 75 mm Dia HDPE PIPES, 6 Kg/ sqcm (PE-100 grade) confirming to IS 4984- 2016 by butt fusion welding as per IS :7634-P-II/2012 as amended from time to time to the alignment and gradient and testing the line to the required pressure,the rate includes hire charges of butt fusion welding machine, all labour charges, hire charges of T&P etc., complete for finished item of work as directed by the Engineer -in-charge. (HDPE pipes will be issued by dept. at free of cost).

Hire charges of JCB for leveling the heaps,Removal of deposited siltin in drains,removal of unwanted trees, overburden earth on sides of roads, levelling the vacant areas etc., the rate includes cost of fuel, wages of driver, repaire charges etc., complete for finished item of work as directed by Engineer-in-charge.

Applying anti termite treatment to the existing buildings in the areas of wooden frames, doors, cubboards, wall cracks etc., wherever required with suitable pesticide like chlorophyriphos 20 EC (shall confirm to IS 8944:2005 RA 2015)/ Imidacloprid 30.5 SC (shall confirm to IS 16131:2015) or equivalent (as registered by central insecticides board-registration committee CIB) to control the pests spreading further, rate includes cost of all materials, all labour charges including making holes, filling with chemical and closing the holes, all leads & lifts, T&P etc., complete for finished item of work as directed by the Engineer-In-Charge. ATT to existing structures shall be as per IS 6313 (part 3) 2013 RA 2018.

Removing and Refixing of Indian pattern water closet with "P" trap 630 mm x 450 mm by dismantling the existing damaged Water Closet and refixing with new one, the rate includes cost of dismantling charges and fixing charges, all labour charges with all leads and lifts but excluding the cost of Water closet etc., complete for finished item of work as directed by the Engineer-in-charge. Installation/fixing of water closet shall be as per APSS 1326.3.4.

Supplying, Removing and Refixing of European type water closet with "S" trap along with Plastic seat & lid by dismantling the existing damaged Water Closet and refixing with new one, the rate includes dismantling charges and fixing charges, all materials cost, labour charges with all leads and lifts etc., complete for finished item of work as directed by the Engineer-in-charge. Pedestal type water closet (European shall be as per IS 2556 (Part2):2004, installation/fixing work shall be as per APSS 1326:3.4.

Supplying and fixing of Flush tanks for European water closets by dismantling the existing damaged flush tank and refixing with new one, the rate includes all materials, dismantling charges and fixing charges, all labour charges with all leads and lifts etc., complete for finished item of work as directed by the Engineer-in-charge. Plastic water flushing cistern shall confirm to IS 7231:1994 RA 2019, type-low level, capacity-10 Lts. Fixing shall be as per the recommendations of the manufacturer.