Loading…
Loading…
Tender Value
₹11.8 L
EMD Value
₹11,700
Closing Date
13 Apr 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
Chief Officer Bhuj Nagarpalika
Supplying, erecting, commissioning and testing of Diesel Generating set for Bhuj nagarpalika office Building.
291729
2025-2026
Open
Electrical
Kutch
2 documents required · 2 mandatory
₹900
Chief officer Bhuj Nagarpalika
₹11,700
30 Mar 2026
30 Mar 2026
30 Mar 2026
13 Apr 2026
30 Mar 2026
Name of Work :- Supplying, erecting, commissioning and testing of Diesel Generating set for Bhuj nagarpalika office
Quantity Nett Rate
Sr. No. Description of Item. Amount.
Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS:
4722:1968 & BS:5514 having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply
comprising of a totally enclosed air/water cooled diesel engine with multi-cylinders developing
suitable BHP not less than following capacity at 1500 RPM with 10% overload for one hour in
hours with standard accessories like fly wheel, lubricating oil cooler, "A" class governor, heavy
duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end
exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder head to
cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric starting
equipment complete with standard heavy duty battery, dynamo, cut-outs, ammeter, necessary
wiring, pressure gauge, starter etc and heavy duty Residential type exhaust silencer (With DEF
System) and vertical hot air duct both
logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor
mounted fuel with level indicator and piping and drip proof alternator, self excited, self
regulated, screen protected, with excitation system, capable of delivering the rated system output
at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-
with voltage regulation +/- 5% of rated voltage from no load to full load. Both the engine and
alternator fitted on a common fabricated steel base plate with antivibration mounting engine
and alternator both connected to each other by flexible flange coupling and with floor/wall
mounted control panel box comprising of voltmeter ammeter, selector switches, ACB / MCCB /
MCB of adequate capacity,
indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected
with provided suitable capacity armoured cable and complete with Acoustic enclosure (canopy)
made out of 16 SWG CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm
thick conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded
rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes, sound level not
more than 75 dB at a distance of 1 mtr, as per PVCT norms.DG set should have in built fuel tank
capacity of minimum 8 hrs of continous running capacity on full load . Erection, commissioning
and satisfactory testing as per requirement with first filling of fuel (minimum up to the 80% of
fuel tank capacity), oil, etc. with guarantee / Warrantee of complete system for Two years. & with
obtaining all necessary certificate from Electrical Inspector. The Capacity and Ratings of DG sets
are as below. (As per new CPCB4+ Emission norms Engine With - Turbo Charger, EGR
(Exhaust Gas Recirculation), CRS (Common Rail Fuel System), DOC (Diesel Oxidation
Catalyst), SCR (Selective Catalytic Reduction), Integrated wiring harness connected to ECU .)
(M) Continuous rating of 125 KVA ,BHP not less than 154 BHP
Providing & erecting approved make AMF control panel suitable for following size of 3 phase,
415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below:
1) Power module: A pair of electromechanically interlocked contactors (for mains & generator)
Overload relay for generator contactor Neutral contactor for mains and generator Power socket for
2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter
items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual
operation. Auto/manual switch. Emergency stop push buttons. Manual start push button.
frequency meter. Engine hour meter. Two earthing studs
3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High
cylinder head temperature. V belt failure.
4) Indicators with alarm Load on generator.
5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.
The AMF Panel of following capacity
(C) AMF Control Panel for100 KVA/125 KVA3 phase DG Set
Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing
Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot
dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe
dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with
constant ohmic value surrounded by highly conductive compound with high charge dissipation
suitable for following type of applications with chamber and heavy duty cover (A)(approved
make OEM has to submit test certificate including value of earth resistance of installation duly
stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane
3 4 Ea mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM 5842.85
Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt
at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound
should be capable to retain moisture for long time Necessary test report must be submitted by
[A] For electrical installation up to 440 V
Length of Pipe - 1 Mtr
Back filling compound - 1 Nos. of Bag of 15 Kgs.
Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/
ACB/ Transformer LT panel board, Motors etc. using proper clamp.
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium
5 15 Mtr conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of 153.52
following size of cables (A) 4 core 16 Sq. mm
Note :- GST extra as per Govermennt rule.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Tender Paper.pdf
Schedule - B.pdf
SBD Document.pdf
Download all tender documents and submit your bid