Providing DP Scheme to Uchavaripalem H/o Arepalli GP of Cherukupalli Mandal of Bapatla District.Est.Cost.8.00 Lakhs

Cost and Supply of 63mm dia PVC Dummy including all Charges etc,complete

Cost and Supply of 63mm dia PVC pipe 6 kgf/cm2 including all Charges etc,complete

Cost and Supply of 40mm dia PVC pipe 6 kgf/cm2 including all Charges etc,complete

Cost and Supply of 63x40mm dia PVC Reducer including all Charges etc,complete

Cost and Supply of 63mm dia PVC all Tees including all Charges etc,complete

Cost and Supply of 40mm dia PVC all Tees including all Charges etc,complete

Cost and Supply of 40mm dia PVC elbows including all Charges etc,complete

Cost and Supply of 63mm dia PVC MTA including all Charges etc,complete

Cost and Supply ofGeo Textile filterb fabric including all Charges etc,complete

Cost and Supply of Nylon rope including all Charges etc,complete

Cost and Supply of 250ml solvent cement including all Charges etc,complete

Cost and Supply of 50mm dia CI NRV including all Charges etc,complete

Drilling of borewell with Hand bore set to a finished of 112/165/175/180 mm dia Bore Well with drill bit and with water pressure in all.Soils with necessary equipment including fixing of PVC Pipes and Specials in position using 112 mm dia bore well including all labour charges etc, complete to draw water

Labour charges for cutting slots to 63 mm dia PVC pipes for filter point to a length of 1.50m long for filtration Purpose

Bailing out of water with 5.00 Hp oil engine including hire charges wage of drivers and helpers etc.

Drilling of 300 mm dia Double under reamed 10/U) round piles including all labour charges etc complete for 3.66 m depth for piles

VRCC M-20 Nominal Mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost 2 and conveyance of all materials and all labour charges etc, but excluding cost of steel and its fabrication charges etc, complete for piles

RCC M-20 Nominal mix (Cement fine aggregate coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement-for Column of the Mini Pump House

RCC M 20 Nominal mix (Cement fine aggregate. coarse aggregate) corresponding to Table 9 of 15 456 using 20mm size graded machine crushed 4 hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement for Arm's (Supporting beam to Bottom slab) of The Mini Pump House

RCC M-20 Nominal mix (Cement fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement Bottom Slab of 100mm thick

Brick Masonry in CM (1:6) with 2nd class bricks traditionla size 23x11x7 cms including cost and conveyance of all materials amd all labour charges etc, complete

Plastering CM(1:5) 12mm thick including cost and conveyance of all material, labour charges etc complete. For Pumphouse.

Painting Walls with emulsion paint exterior grade Paint over Priming Coat of white, 2 Coats (All Colours) including cost and conveyance of all materials and labour charges etc complete.

Supplying, fitting and placing TMT bar reinforcement in VRCC works complete as per 8 drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded.or Pumphouse steel

Supply and delivery and errection of 3.00 HPcentrifugal mon-block pump set with Single -Phase motor 2880 RPM 240 V (-15% + 10% Range - 340 to 440 Volts) 50HZ with class 'F' insulation of reputed make with ISI mark with minimum overall efficiency of 75% at the duty point including cost conveyance of motor pumpset contirming IS specification to any Scheme point in Guntur District , Single phase Centrifugal Monoblock Pump set.

Supply and delivery errection of wall mounted industrial type control panel board of size 400x450x150mm made of 18 SWG CRCA sheet steel enclosure 14 SWG mounting plate for cable entry fabricated for Single Phase power pumps for delivery at sites with all required accessories for 5.00 HP Single phase pumpset.

Supply and delivery of HDPE PE-100 6 Kg/Sqcrn Pipes as per IS: 4984/2016 including cost and conveyance, excluding taxes etc. complete for For 90 mm HDPE 6 Kg/cm2

Earth work excavation for pipe line trences by 2/3 machinery and 1/3 manual etc. in all soils except rocky soils including lowering, laying and Jointing of pipes with required fittings/specials true to alingment and gradient, refilling with already excavated earth, watering, tamping and rernoving surplus earth and testing to required hydraulic test pressure etc for finished item of work for distribution line with 90 mm HDPE 6 Kg/cm 2

Supply and delivery of HDPE PE-100 6 Kg/Sqcrn Pipes as per IS: 4984/2016 including cost and conveyance, excluding taxes etc. complete for For 75 mm HDPE 6 Kg/cm2

Earth work excavation for pipe line trences by 2/3 machinery and 1/3 manual etc. in all soils except rocky soils including lowering, laying and Jointing of pipes with required fittings/specials true to alingment and gradient, refilling with already excavated earth, watering, tamping and rernoving surplus earth and testing to required hydraulic test pressure etc for finished item of work for distribution line with 75 mm HDPE 6 Kg/cm 2

Horizantal Drilling the Bore under the Road crossing from initial size of 250 mm dia to 180mm dia step by step including labour charges, cost of fuel charges, hire charges of equipment cost and convayance of all materials etc.complete.

Skilled labour, Machinery, braker and concrete saw cutter for Cutting open road Surface and depositing the on banks with an initial lead and lift etc., complete. Cutting open cc road surface

provision for CI pipes and specials

Cost and supply of the 75 mm dia PVC saddle piece including all taxes etc complete.

Cost and supply of the 90 mm dia PVC saddle piece including all taxes etc complete.

Cost and supply of the 20 mm dia GM Ferrule including all taxes etc complete.

Cost and supply of the 20 mm dia GI Nipple including all taxes etc complete.

Cost and supply of the 20 mm dia GI Union including all taxes etc complete.

Cost and supply of the 20 mm dia GI Pipe class B including all taxes etc complete.

Cost and supply of the 20 mm dia GI Elbows including all taxes etc complete.

Cost and supply of the 20 mm dia GI Coupling including all taxes etc complete.

Cost and supply of the 20 mm dia Steel taps including all taxes etc complete.

Cost and supply of the Thread Balls including all taxes etc complete.

Cost and supply of the Shallock Bottles including all taxes etc complete.

Cost and supply of the110 mm dia PVC Pipe 6 kg/cm2 including all taxes etc complete.