underwater blasting for intake at Bennithora reservoir near Harsur village , chittapur taluka, Kalaburagi district

Supply and installation of 12T x 1.0 sqmm (with Individual and overall shielding) XLPE Armoured cable.

Supply and installation of 16P X 1.5 sqmm (with Individual and overall shielding) XLPE Armoured . Cable

Supply and installation of 2P X 1.5 sqmm (with ndividual and overall shielding) XLPE Ar.cable

industrial grade with ups system battery of 5 KVA 415V AC input 230V output with battery backup of 8 hours maintenance free batteries with all leads and lifts

supply and installation Pressure gauge (diaphragm type, 150mm dial) with suitable isolation valve

Supply of Rubber Insulating Gloves 33kV Grade Rubber Insulating Gloves 33kV Grade

Supply and installation of Lightning Material Insulated Support (Supporting Clamp)

Supply and installation of Lightning Material Test Link (Suitable for 25x3mm GI Flat

Supply and installation of Switchboard and Sockets Industrial Type, 30,63A, 415V Welding Receptacles

Supply and installation of Switchboard and Sockets Commercial type 10, 20A socket outlets for AC Nos 2

Supply and installation of Switchboard and Sockets Industrial type 10,6/20A 6 pin socket outlets with switch & plug

supply and installation of 10mm Anchor Fasteners

Supply and installation of Ball Socket (Suitable For 20mm Dia G.I. Down Rod)

Supply and installation Industrial Corrosion Purpose Luminaire Suitable For 1X40W LED Conversion Kit & Battery for Emergency Back Up Operation.

Supply and installation Industrial General-Purpose Luminaire Suitable For 1X40W LED Conversion Kit & Battery For Emergency Back Up Operation.

Supply and installation of Decorative Recess Mounting Mirror Optics Luminaire with Serrated Aluminium Cross Louvers and White Engineering Plastic End Caps with Electronic Ballast, Suitable For 1X36W Led.

Glands for power Cable19C x 1.5 Cu Sq mm double compressed gland ss/brass/aloy gland (Supply and erection) DBW-02A dowell or equivalent

Glands for power Cable7C x 2.5 Cu Sq mm double compressed gland ss/brass/aloy gland (Supply and erection) DBW-01A dowell or equivalent

Glands for power Cable2C x 25 Al Sq mm double compressed gland ss/brass/aloy gland (Supply and erection) DBW-01 dowell or equivalent

Glands for power Cable2C x 2.5 Cu Sq mm double compressed gland ss/brass/aloy gland (Supply and erection) DBW-01S dowell or equivalent

Glands for power Cable4C x 25 Al double compressed gland ss/brass/aloy gland (Supply and erection) DBW-03 dowell or equivalent

Glands for power Cable4C x 16 Al double compressed gland ss/brass/aloy gland (Supply and erection) DBW-02 dowell or equivalent

Glands for power Cable3.5C x 240 Al double compressed gland ss/brass/aloy gland (Supply and erection) DBW-10A dowell or equivalent

Glands for power Cable3.5C x 35 Al double compressed gland ss/brass/aloy gland (Supply and erection) DBW-04 dowell or equivalent

glands for power Cable 3C x 10 Al Sq mm double compressed gland ss/brass/aloy gland (Supply and erection) DBW-01A dowell or equivalent

Glands for power Cable3C x 4 Al Sq mm double compressed gland ss/brass/aloy gland (Supply and erection) DBW01S dowell or equivalent

Glands for power Cable 3C x 2.5 Cu. Sq mm double compressed gland ss/brass/aloy gland (Supply and erection)DBW-01S dowell or equivalent

Supply and installation of LPBS (local push button station with emergency stop mushroom type push button)

Supply and installation of Welding Receptacle Electrical Room) IP-55 with RCCB protection 63A and industrial socket (supply and erection)

Supply and installation of Exhaust Fan DB (With one incomer and 7 outgoing sufficient to run the load of 3 phase 1.1KW with overcurrent protection with on, off and trip indication

Supply Erection,testing and commissioning of HT PANELS Scope includes shifting the Panel from the stockyard/store to the work place including all leads and lifts, men and machinery

NGR rating 110 Ohms 350A suitable for 6.6 bar3 KV, 10 sec for 4 MVA Transformer along with panel.

Supply installation and trial of Exhaust Fan Capacity 7172 cum per hr(500 mm opening)1. Axial fan (casing- MS, Impeller - Aluminium)2. Motor (415V, 3 Ph, 50 Hz., IE-2, Class F IP 55) (1.1KW)3. Inlet Bird screen4. Outlet Gravity Louver5. Wall Cowl with Weld Mesh6. Angle Fixture9. Fasteers BolTs nuts10. Vibration isolator Rubber Pad

Conducting various Laboratory/ Field tests on Rock samples at an approved laboratory including preparation of soil samples to determine the following properties of soil, all complete as per specifications

Chemical analysis of Soil sample (pH, Chlories & Sulphates)

Chemical analysis of water (pH, Chlorides & Sulphates)

Direct shear test/ Triaxial shear test (UU)

Consolidation test including determination of preconsolidtion pressure (If required)

Swell pressure (if required)

Free swell index (If Required)

Specific gravity

Liquid limit, plastic limit & Shrinkage limit

Sieve analysis / Hydrometer analysis

Bulk density and moisture content

Conducting various Laboratory tests on soil (As per ISSP36 (Part-1) Samples at an approved laboratory including preparation of soil samples to determine the following properties of soil, all complete as per specifications.

Making 150mm nominal diameter bore holes at various locations of building / structured in all types of soils including laterite using suitable approved method of boring including chiseling, cleaning, providing casing pipe as required or as directed.

Carrying out geo technical investigation at dam site through borehole drilling in water for a depth of 17-20m with all reports of investigation including required machinery, materials and manpower.

Data Collection, Review, Analysis, Project Screening, Establishment of Environmental Base Line Data Data about Water, Air, Soil quality and Social Impact Assessment (ESIA), Development of Environmental and Social Management Plan ESMP

Conducting environmental impact assessment for the proposed construction of intake well, cleaning chambers, pipeline supports and other ancillary structures for the proposed project site

Carrying out pre and post Bathymetric survey with multi beam engineering grade equipment (average area to be surveyed is 500mX500m) including required machinery, materials and manpower

DeMobilization of equipment set required for the underwater blasting, drilling, excavating dredging including required machinery, materials and manpower

Excavation in all types of rock by underwater drilling and controlled blasting , launching drilling pantoon for drilling holes for blasting rock, carry out rock blasting, removal of rocks using backhoe/grab shell dredger and excavators , disposal of the blasted and dredged material shall be side casted or dumped in the designated area , the rate is including of all leads and lifts with required machinery, materials and manpower

Dredging in all types of soil in the underwater of the Bennithora reservoir near Harsur village and removing soil using backhoe/ clam shell dredger, shifting/dumping the excavated stuff including all leads and lifts

Mobilization of equipment set required for the underwater blasting, drilling, excavating dredging including required machinery, materials and manpower