SDSTPS

Supply and fixing of Internal Door frames at all elevations of the building by using CRCA frame 1.25 mm thick CRCA section, size should be 50 x 60 mm with 32 mm rebate. The corner of the frame should be welded. The frame should be painted with one coat of primer and finished painted with pure polyester paint. The frame should be provided with approved quality butt hinges of 3 Nos ,outer frame section should be 50 X 75 mm,complete for finished item of work as directed by the Engineer -in-Charge.

Supply and fixing of internal doors of size 0.91 m x 2.00 m single leaf door by using 35mm thick “RAJSHRI” or Equivalent BRAND FACTORY MADE MOULDED DOOR SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped with 15mm (5mmX3) thick X 30mm width on one stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different panel and / or prelam colours on one side after routing the moulded design on flush door and 2mm prelam Pac sheet on other side using rubber adhesive on flush door and solvent cement adhesive on Pac lipping ,all required fixtures and fitting such as MS Powder coated hinges 100 mm size, MS powder coated Al.drops 300 mm size , MS powder coated tower bolts 250 mm size, MS Powder coated handles 150 mm long , Nylon silencers 40 mm size, Wooden wind cleats , etc.etc. complete at all floors as per direction of Engineer-in-Charge.