Maintenance And Repairing Work of control cabin between ch. 170.740 km to ch. 205.986 km of Kachchh Branch Canal

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

Dismantling santtary fittings like wash basin . W.C.

2 pan Indian and European type, flushing tank etc. 3.00 Each 410.13

including stacking the materials with all lead and lift.

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(B) Dense or Hard soil

Providing and laying cement concrete 1:4:8 (1-

Cement: 4-coarse sand :8-hand broken stone

4 aggregates 40mm nominal size) and curing 13.34 m3 2742.27

complete excluding the cost of formwork (A)

Foundations & Plinth.

Providing and laying cement concrete 1:3:6 (1-

Cement: 3-coarse sand :6-crushed stone aggregates

20mm nominal size) and curing complete including

the cost of formwork (A) Wall caps and coping.

Precast concrete block masonary (including

quionblocks jambs blocks closer etc.)with solid

concrete blocks of aprroved size made of cement

concrete 1:3: (1-Cement:3 Coarse sand:6-graded

stone aggregates of 20mm and down grade) in

Foundation and plinth cement mortar 1:6.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers

7 not exceeding 20 cm. in depth consolidating each 3236.03 m3 135.56

disposited layer by ramming and watering (Lead

Upto 1.0 km)

Providing TMT Bar FE 500D reinforcement for R.C.C.

work including bending, binding and placing in

8 position complete upto floor two level 3099.13 Kg 76.52

Point wiring for Light / Fan/ Bell/ Primary Point with

2-1.5 sq. mm & earthwire of 1.5 sq. mm (green)

both are of ISI marked 1.1 kv grade FRLS PVC

insulated multistrand copper wires, in following

type of pipe to be erected concealed in /flushed on

wall/ceiling , complete with 6A Tissino Type ISI

marked flush type switch / bell push and accessories

erected on Metal / PVC Box covered with 3 mm

thick PC(Polycarbonet) /Acrylic sheet. with

necessary Lamp holder/ceiling rose / H.D.Connector

as directed.(a) with medium class Rigid PVC pipe

and accessories

Point wiring for Individual Plug with & earthwire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires,

in following type of to be erected concealed in / on

surface of wall / ceiling complete with Modular type

10 switch & 5 pin Plug erected on PVC / Metallic box 84.00 Each 434

covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected

with following type of accessories.[C] For 16A Plug

with 2-4 sq.mm Cu. Wire, (a) with medium class

Rigid PVC pipe and accessories (Cat. I)

Providing & erecting Approved make Ceiling Fan

with double ball bearing ISI mark with condenser

A.C.230V 50c/s. 1400 mm. sweep complete, canopy

11 and 30 cms. down rod erected on existing hook or 11.00 Each 1721

clamp with 24 / 0.2, 3 core flexible Copper wire with

earthing [Make shall be approved by Engineer in

Supplying and erecting led lamps with following

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

12 protection,Polycarbonate diffuser, mounting 60.00 Each 123

suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (iii) 10 to 15 watts Cat II

Providing soak pit of 5.0 CM volume including

excavating and filling brick bats with dry masonary

work at top for 45 cm. height including covering the

top with stone including providing vatas in cement

mortar 1:3 (1 cement, 3 sand) with finishing curing

etc. completed as directed

P & L 24" x 24" vitrified 8 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

14 existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning thesurface etc. complete for

light shade

Providing and laying Vitrified tiles 8 to 10mm thick

in risers of steps,skirting and Dedo laid on10mm

thick cement mortar 1:3 (1-Cement : 3 coarse sand)

and jointed with white cement slury.

Providing and laying white glazed tiles 6mm thick in

skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry.

Providing and fixing rolling shutters of approved

make made of 80 mm wide M.S. laths inter-locked

together through their entire length and jointed

together at the ends by end locks mounted on

17 specially designed pipe shaft with bracket plates, 4.61 m2 3519.21

guide channels and arragements for inside and

outside locking with pushpull operation including

the cost of hood cover and spring etc. complete.(A)

Shutters having width below 3.5 M.

Providing and fixing Hood cover for rolling shutters

(A) Shutters having width below 3.5 meters

Providing and fixing window with MS Sheet in

panels of window shutters including the cost of

replacement of existing frame. The cost also

includes the cost of required materials labours

loading and unloading etc. Complete as per

direction of engineer in charge.

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including thoroughly brushing the surface free from

mortar droppings and other foreign matter and

sand papered smooth.

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

21 shape even shade after thoroughly brushing the 1248.69 m2 119.07

surface to remove all dirt, and remains of loose

powdered materials etc complete.

Applying priming coat over new steel and other

metel surface after and including preparing the

surface by throughly cleaning, oil,grease, dirt and

other foreign matter and scoured with brushes fine

steel wood, scrapers and sand paper with ready

mixed priming paint brushing red lead.

Painting Two coats (excluding priming coat) on

previously printed steel and other metal surface

23 with synthetic enamel paint, brushing to give an 271.70 m2 91.29

even shade including cleaning the surface of all dirt,

dust and other foreign matter.

Providing and fixing water closet squatting Pan

(Indian type W.C. Pan) size 580mm (Earthwork, bed

24 concrete, foot reste and trap to be measured and 6.00 Each 977.37

paid for separately) (A) Vitreous China.(I) Long

pattern = White colour

Providing and fixing 100mm size P or S trap for

water closet squatting pan including jointing the

trap with the pan and soil pipe in cement Mortar 1:1

(1-Cement : 1- Fine sand)(A) Vitreous China.

Providing and fixing PVC SWR Nahni trap IS

for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing design

with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

Providing and fixing washbasin with single hole for

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same

but excluding fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v 400mm size. (i) In white

Providing and fixing Rubber plug for sink or wash

Providing and fixing C.P. brass waste for washbasin

or sink. (A) 32mmdia.

30 Waste Pipe for Wash basin C.P. 32 mm dia 6.00 Each 52.54

Providing and laying broken chine mosaic flooring

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

creme out upto surface using white cement

including rounding off junctions and extending them

upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

Providing and fixing 35mm thick factory made

moulded door shuter consisting of solid core single

leaf flush door of 30mm thickness, lipped with

15mm (5mm x 3) thick x 30mm width on one stiles

and top rail and 10mm (5mm x 2) thick x 30mm

width on the other stiles and bottom rails. The inner

panel laminated with 2mm thick termite proof,

water proof and fire resistant moulded PVC sheet

with 2,4,6 raised panel design in different plain and

/or prelim colours on one side after routing the

moulded design on flush door and 2mm plain

and/or prelim PVC sheet on other side using rubber

adhesive on flush door and solvent cement adhesive

on the PVC liping etc.complete as per direction of

Providing erecting and fixing double coated Syntex

PVC. (ISI) water tank of required capacity each with

33 6000.00 litre 3.91

all necessary fittings and connection etc. complete

on terrace

Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL

/ FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials.

Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL

/ FINOLEX or equivalent as approved by Engineer In

35 Charge. Pipe shall be fixed on the wall with the help 300.00 Rmt 90.93

of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials.

Supplying & erecting approved make self-priming

domestic monoblock water pump with 1 H.P motor,

suitable for operation on 230 volts, 50c/s. AC supply

with metallic flange, and M.S. impeller delivery and

following discharge.(a) 40 LPM at 24 mtrs. head

suitable for 25mm dia. Delivery (cat-II)

Providing and fixing screw down bib taps of

37 following size.(A) Brass screw down bib tap polished 6.00 Each 184.98

bright. (i) 15mm dia.

Providing and fixing pillar tap, capstan head, screw

38 down high pressure with screws, shanks and back 6.00 Each 305.67

nuts. (i) 15mm dia.

Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper

39 wires of following size to be erected as directed.(h) 160.00 Rmt 77

2.5 Sq.mm 3 Core round PVC sheathed.

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD <

40 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, 20.00 Each 3312

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

between the ranges shown.)(A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.(i)

above 36 to 48 watts. Cat-III

Providing and erecting Pipe type earthing having

150 cms.long and 2.5 cms. dia. galvanised iron pipe

41 with coupling and buch buried in specially prepared 20.00 Each 365

earth pit complete with necessary 8 SWG earth

For using salt and charcoal / coke as required for

pipe type earthing.

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

43 for 1.1 KV. to be laid on wall with necessary clamps 740.00 Rmt 69

or in existing trench / pipe of following size of

cables. (A) 3 core 2.5 Sq. mm

Making trench in Hard Murrum / Tar Road of

suitable width of 90 cm or required depth for laying

44 any size of cable or locating the fault all over the 740.00 Rmt 74

run and back filling the same and making the

surface as normal ground.

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming

to IS 14930 II )with necessary connecting

accessories of same material at required depth in

existing trench for laying of cable. below ground /

road surface for enclosing cable (A)50 mm outer dia

Supplying and erecting approved make Conical Pole

(Medium Duty ) Made from HR sheet steel. The pole

should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, with

required base plate and integral Junction box

consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for

cable terminations as erected on suitable

foundation (included) with necessary GI nut-bolts/J-

Bolts. as per details given by manufacturer

considering site requirement. The length of poles

are as below.(E) 7 Mtr. Long 70 mm Top X 175 mm

bottom dia, 3 mm thickness

Providing 1:2:4 cement concrete foundation & 70 %

PCC from bottom including excavation for the pole

of size 60 x 60 x 120 cm. Deep in below ground level

47 with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) 20.00 Each 1280

high upper ground level with necessary curing and

finishing in approved manner. ( for 7.5 & 8/8.5 mtr

Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted with

one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following

nos of arms.[B] Double Arm Bracket 1.5 Mtr

providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V

49 A.C. system and having breaking capacity 10 KA to 20.00 Each 111

be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat-III

Providing, Supplying and fixing office furniture like

Office table, Revolving chair and Visitor chairs etc in

all Control Cabins between Ch 170.740 to 205.986 10 Each 4000

50 km. (a)Office Table

(b)Staff revolving Chair 10 Each 3500

(c .) visitor chair 30 Each 2500

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for

termite control treatment including labour and

material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

51 6131_paret-II Consentration Weight one percent is 310.68 m2 123.12

recommended i.e one litre 20 EC chemical emulsion

with 19 liter give 1 % concrentration inclusive of one

litre chemical emulsion appication at the rate of

Litre chemical / Sqm of surface is recommended as

Carrying out wall treatment for termite control

including spraying with chemical solution in oil base

including labour and material Using Chlorpyriphos

20 ECAs per IS 6313 part- II (1% concentration by

52 mass) is recommended i.e one litre chemical 840.9 m2 44

emulsion diluted with 19 liter oil base. Total solution

will be 20 liters inclusive of one liter chemical

emulsion application at the rate of 7.5 litre chemical

/ Sqm of surface is recommended as per I.S.

Providing and laying controlled cement concrete

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced 4.94 m3 4043.57

concrete work in (A) Foundations, footings, Base of

53 columns and Mass concrete

(C) Slabs,landing,shelves,Balconies Lintels, Beams,

Girders and Cantilever upto floor two level.

(D) Columns, Pillars posts and struts upto floor two

54 Extra for masonry work with precast concrete block 33.82 m3 4013.55

in superstructue above plinth upto floor two level.

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. Height of

propping and centering below supporting floor to 42.76 m2 178.61

ceiling not exceeding 4 M. and removal of the same

for in situ reinforced concrete and plain concrete

work in. (A) Foundations Footings Bases of Columns

etc. and Mass concrete

55 (G) Columns PillarsPosts and struts. (1) Square

Rectangular Polygonal in plan.

(L) Chullah Hoods, weather shades Chhajjas Corbels

etc. including edges.

(H) (1) Sides and soffits of Beams Beam Haunchings

cantilevers Girders Bressumers and Lintels not 47.26 m2 203.42

exceeding 1 M. in Depth.

(B) Flat surfaces such as soffits of suspended floor

roof slabs Landings and the like. (1) Floors etc. 208.31 m2 261.29

upto 200 mm in thickness.

Providing 20 mm thick double coat mala cement

plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm thick

cement plaster in cement mortar (1 Cement :

coarse sand in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse

sand) finished with trovel including scaffolding

curing etc. complete.

Providing 15mm thick cement plaster in single coat

on Rough (Similar)side of single or half brick walls

57 for interior plastering upto floor two level and 222.22 m2 161.66

finished even and smooth in (i) Cement mortar 1:3

(1-cement:3- sand)

Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at

58 required spacings and frame alround, square or 175.95 kg 108

round bars with round headed bolts and nuts or by

screws (A) Plain Grill.

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall

59 surface to give an even shade including thoroughly 222.22 m2 40.19

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

Providing and laying (to level or slopes) and jointing

60 with stiff mixture of Cement Mortar in proportion 17.00 Rmt 223.34

1:1 Salt glazed stoneware pipes including testing of

pipes and joints complete.(A) 100mm dia.

Total:-

figures and words) of the estimated rate mentioned above. Amount of my/our tender works out as under.

Estimated amount put to tender:- Estimated amount put to tender:-

In words In words

(A) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item Quantity Unit Rate Amount

No (with brief specification

and reference to book of

specifications) figures Words

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure)

(C)Net Tendered Amount (A-B) (in figure)

1 The Contractor shall exhibit a board with detailed specification and details

of work as directed by the Engineer-In-Charge for which no extra payment

shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work

3 GST and Income tax TDS will be deducted at a source while making

payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been

taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of

input rate mentioned in all the tender.