Repairing and Renovation of Office Building at KASEZ, Gandhidham.

ABSTRACT OF COST

AMOUNT (Rs) AMOUNT (Rs)

S. No. DESCRIPTION

1 EARTH WORK 13,926.00 0.00

2 CONCRETE WORK 2,25,686.00 0.00

3 REINFORCED CEMENT CONCRETE 2,32,033.00 0.00

5 MARBLE WORK 3,23,469.00 0.00

6 WOOD WORK & PVC WORK 39,61,628.00 0.00

7 STEEL WORK 26,624.00 0.00

11 DISMANTLING AND DEMOLISHING 1,86,613.00 0.00

13 ALUMINIUM WORK 33,776.00 1,06,995.00

15 ELECTRICAL WORKS 3,48,445.00 0.00

16 HORTICULTURAL DEVELOPMENT WORK 1,93,894.90 4,95,854.60

TOTAL FOR DSR/ NS ITEMS 81,36,187.50 9,27,941.63

GRAND TOTAL FOR CIVIL WORKS, PLUMBING WORKS,

GRAND TOTAL FOR CIVIL WORKS, PLUMBING WORKS,

ELECTRICAL WORKS : DSR/ NS ITEMS

Digitally signed by SHUBHAM

NBCC (India) Limited

(A GOVERNMENT OF INDIA ENTERPRISE)

Repairing and Renovation of Office Building at KASEZ, Gandhidham.

BILL OF QUANTITIES

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Earth work in excavation over areas (exceeding 30cm in depth, 1.5m

in width as well as 10 sqm on plan) including disposal of excavated

earth, lead upto 50m and lift upto 1.5m disposed earth to be levelled

and neatly dressed.

Excavating trenches of required width for pipes, cables, etc including

excavation for sockets, and dressing of sides, ramming of bottoms,

depth upto 1.5 m, including getting out the excavated soil, and then

2 2.10 returning the soil as required, in layers not exceeding 20 cm in depth,

including consolidating each deposited layer by ramming, watering,

etc. and disposing of surplus excavated soil as directed, within a lead

2.10.1 All kinds of soil

2.10.1.2 Pipes, cables etc. exceeding exceeding 300 mm dia Meter 10.00 352.15 3522.00 0.00

2.10.1.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm Meter 5.00 549.75 2749.00 0.00

Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth,

consolidating EACH deposited layer by ramming and watering, lead

up to 50 m and lift upto 1.5 m.

TOTAL OF EARTH WORKS 13926.00 0.00

Providing and laying in position cement concrete of specified grade

4 4.1 excluding the cost of centring and shuttering - all work upto plinth

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm

Providing and fixing up to floor five level precast cement concrete

solid block including hoisting and setting in position with cement

mortar 1:3 (1 cement : 3 coarse sand), cost of required centering,

shuttering complete :

1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone

aggregate 20 mm nominal size).

TOTAL OF CONCRETE WORK 225686.00 0.00

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

REINFORCED CONCRETE WORK

Centering and shuttering including strutting, propping etc. and

removal of form for :-

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete SQM 10.00 392.15 3922.00 0.00

5.9.3 Suspended floors roofs, landings, balconies & access platform. SQM 20.00 927.25 18545.00 0.00

5.9.5 Lintels, beams, plinth beams, girders, bressumers and SQM 30.00 736.40 22092.00 0.00

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. SQM 20.00 961.30 19226.00 0.00

5.9.19 Weather shade, Chajjas, corbels etc., including edges. SQM 5.00 951.10 4756.00 0.00

Steel Reinforcement for R.C.C work including straightening, cutting,

bending, placing in position & binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars KG 80.00 107.85 8628.00 0.00

Steel reinforcement for R.C.C. work including straightening, cutting,

8 5.22A bending, placing in position and binding all complete above plinth

5.22A.6 Thermo-Mechanically Treated bars KG. 60.00 107.85 6471.00 0.00

Providing and laying in position machine batched and machine mixed

design mix M-25 grade cement concrete for reinforced cement

concrete work, using cement content as per approved design mix,

including pumping of concrete to site of laying but excluding the cost

of centering, shuttering, finishing and reinforcement, including

9 5.33 admixtures in recommended proportions as per IS: 9103 to accelerate,

retard setting of concrete, improve workability without impairing

strength and durability as per direction of Engineer-in-charge.(Note :-

Cement content considered in this item is @ 330 KG/CUM.

Excess/less cement used as per design mix is payable/recoverable

5.33.1 All works upto plinth level

5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum CUM 5.00 9655.70 48279.00 0.00

5.33.2 All works above plinth level upto floor V level

5.33.2.2 Concrete of M30 grade with minimum cement content of 350 kg /cum CUM 10.00 10011.35 100114.00 0.00

TOTAL OF REINFORCED CONCRETE WORK 232033.00 0.00

Brick work with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in foundation and plinth in:

6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 20.00 7370.65 147413.00 0.00

BRICK WORK TOTAL 147413.00 0.00

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Providing and fixing 18mm thick gang saw cut mirror polished

premoulded and prepolished) machine cut for kitchen platforms,

vanity counters, window sills, facias and similar locations of required

size of approved shade, colour and texture laid over 20mm thick base

cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with

white cement, mixed with matching pigment,epoxy touch

ups,including rubbing, curing, moulding and polishing to edges to

give high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab colour black, Cherry/Ruby red

Providing edge moulding to 18 mm thick marble stone counters,

12 8.3 Vanities etc., including machine polishing to edge to give high gloss

finish etc.complete as per design approved by Engineer-in-Charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming

to IS: 15622 (thickness to be specified by the manufacturer), of

approved make, in all colours, shades except burgundy, bottle green,

black of any size as approved by Engineer-in-Charge, in skirting,

risers of steps and dados, over 12 mm thick bed of cement mortar 1:3

(1 cement :3 coarse sand) and jointing with grey cement slurry @

3.3kg per sqm, including pointing in white cement mixed with

pigment of matching shade complete.

CLADDING WORK TOTAL 323469.00 0.00

WOOD AND PVC WORK

Providing wood work in frames of doors, windows, clerestorey

windows and another frames, wrought framed and fixed in position

with hold fast lugs or with dash fasterners of requires dia & length (

hold fast lugs or dash fasterner shall be paid for separately).

9.1.1 Second class teak wood CUM 0.25 142949.70 35737.00 0.00

Providing and fixing panelled or panelled and glazed shutters for

doors, windows and clerestory windows, including ISI marked M.S.

15 9.5 pressed butt hinges bright finished of required size with necessary

screws, excluding panelling which will be paid for separately, all

complete as per direction of Engineer-in-charge.

9.5.1 Second class teak wood

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Providing and fixing panelling or panelling and glazing in panelled or

panelled and glazed shutters for doors, windows and clerestory

16 9.7 windows (Area of opening for panel inserts excluding portion inside

grooves or rebates to be measured). Panelling for panelled or panelled

and glazed shutters 25 mm to 40 mm thick :

9.7.1 Second class teak wood SQM 5.00 3323.20 16616.00 0.00

9.7.7 Float glass panes

Providing and fixing flat pressed 3 layer particle board medium

exterior grade (Grade I) or graded wood particle board IS : 3087

to frame, backing or studding with screws etc. complete (Frames,

backing or studding to be paid separately):

Providing and fixing ISI marked flush door shutters conforming to

IS:2202 (Part-I) non-decorative type, core of block board construction

18 9.21 with frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains of cross bands and face veneera on both

faces of shutters:

30 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

25 mm thick (for cupboard) including ISI marked nickel plated bright

finished M.S. piano hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm

19 9.23 minimum depth on all edges of flush door shutters (over all area of Sqm 15.00 462.35 6935.00 0.00

door shutter to be measured).

Providing and fixing M.S. grills of required pattern in frames of

20 9.48 windows etc. with M.S. flats, square or round bars etc. including

priming coat with approved steel primer all complete.

9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. Kg 10.50 238.35 2503.00 0.00

Providing and fixing bright finished brass 100 mm mortice latch and

21 9.76 lock with 6 levers and a pair of lever handles of approved quality Each 10.00 854.65 8547.00 0.00

with necessary screws etc. complete.

Providing and fixing aluminium sliding door bolts ISI marked

anodised (anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour or shade with nuts and screws

etc. complete :

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Providing and fixing aluminium tower bolts ISI marked anodised

(anodic coating not less than grade AC 10 as per IS : 1868 )

transparent or dyed to required colour or shade with necessary screws

etc. complete :

Providing and fixing aluminium handles ISI marked anodised (anodic

24 9.100 coating not less than grade AC 10 as per IS : 1868) transparent or

dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper ISI

marked anodised (anodic coating not less than grade AC 10 as per IS :

1868) transparent or dyed to required colour and shade with

necessary screws etc.complete.

(a) 9.101.2 Twin rubber stopper Each 6.00 72.35 434.00 0.00

Providing and fixing factory made P.V.C. door frame of size 50x47

mm with a wall thickness of 5 mm, made out of extruded 5mm rigid

PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm

long brackets of 15x15 mm M.S. square tube, the vertical door frame

26 9.119 profiles to be reinforced with 19x19 mm M.S. square tube of 19 Rmt 15.00 492.70 7391.00 0.00

gauge, EPDM rubber gasket weather seal to be provided throughout

the frame. The door frame to be fixed to the wall using M.S. screws of

65/100 mm size, complete as per manufacturer’s specification and

direction of Engineering-Charge.

Providing and fixing factory made panel PVC door shutter consisting

of frame made out of M.S. tubes of 19 gauge thickness and size of 19

mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S.

frame shall have a coat of steel primers of approved make and

(a) 9.120.2 30 mm thick pre laminated PVC door shutters Sqm 5.00 3663.80 18319.00 0.00

Providing & Fixing decorative high pressure laminated sheet of

plain /wood grain in gloss / matt / suede finish with high

28 9.127 density protectivesurface layer and reverse side of adhesive bonding

quality conforming toIS : 2046 Type S including cost of adhesive of

approved quality.

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Providing and fixing factory made uPVC white colour fixed glazed

windows/ ventilators comprising of uPVC multi-chambered frame

and mullion (where ever required) extruded profiles duly reinforced

with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll

Fixed window / ventilator made of (small series) frame 47 x 50 mm &

(a) 9.147B.1 mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and sqm 42.80 8106.30 346950.00 0.00

single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)

Providing and fixing stainless steel fancy handle of approved make

30 9.170 fixed with SS screws etc. complete as per direction of Engineer-in-

Providing and fixing stainless steel soft closing spring hinges at 0

degree hinges (hydraulic type) of approved make/brand to cupboard

31 9.171 shutters with full threaded steel screws including making necessary EACH 40.00 272.00 10880.00 0.00

recess in board and finished etc. complete as per direction of Engineer-

Providing and fixing stainless steel soft closing heavy type telescopic

32 9.172 drawer channels of approved make 500 mm long with screws etc. one set 10.00 885.10 8851.00 0.00

complete as per directions of Engineer- in-charge.

WOOD WORKS TOTAL 3961628.00 0.00

Steel work welded in built up sections/ framed work, including

33 10.25 cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts complete,

i/c fixing the railing with necessary accessories & stainless steel dash

fasteners , stainless steel bolts etc., of required size, on the top of the

floor or the side of waist slab with suitable arrangement as per

approval of Engineer-in-charge, ( for payment purpose only weight of

stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

STEEL WORKS TOTAL 26624.00 0.00

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Kota stone slab flooring over 20 mm (average) thick base laid over

and jointed with grey cement slurry mixed with pigment to match the

shade of the slab, including rubbing and polishing complete with base

of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded

36 11.3 stone aggregate) finished with a floating coat of neat cement including

cement slurry, but excluding the cost of nosing of steps etc. complete.

(a) 11.3.1 40mm thick with 20mm nominal size stone aggregate. SQM 20.00 614.20 12284.00 0.00

Chequerred precast cement concrete tiles 22 mm thick in footpath &

courtyard, jointed with neat cement slurry mixed with pigment to

37 11.2 match the shade of tiles, including rubbing and cleaning etc.

complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4

(a) 11.20.2 Medium shade pigment using 50% white cement 50% Grey cement SQM 20.00 1328.35 26567.00 0.00

Providing and laying rectified Glazed Ceramic floor tiles of size

300x300 mm or more (thickness to be specified by the manufacturer),

of 1st quality conforming to IS : 15622, of approved make, in all

38 11.40 colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on SQM 80.00 1439.40 115152.00 0.00

20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand),

including pointing the joints with white cement and matching

pigments etc., complete.

Providing and laying vitrified floor tiles in different sizes (thickness

to be specified by the manufacturer) with water absorption less than

0.08% and conforming to IS : 15622, of approved make, in all colours

and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4

coarse sand), including grouting the joints with white cement and

matching pigments etc., complete.

11.41A.1 Double charge vitrified tile polished finish of size

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Providing and laying Vitrified tiles in different sizes (thickness to be

specified by the manufacturer), with water absorption less than 0.08%

and conforming to IS: 15622, of approved brand & manufacturer, in

all colours and shade, in skirting, riser of steps, laid with cement

based high polymer modified quick set tile adhesive (water based)

conforming to IS: 15477, in average 6 mm thickness, including

grouting of joints (Payment for grouting of joints to be made

Grouting the joints of flooring tiles having joints of 3 mm width,

using epoxy grout mix of 0.70 kg of organic coated filler of desired

41 11.48 shade (0.10 kg of hardener and 0.20 kg of resin per kg), including

filling / grouting and finishing complete as per direction of Engineer-

Deduct for not grouting the joints with white cement and matching

pigment in the items of fixing of vitrified tiles.

Providing and fixing Glass mossaic tiles at finished plain wall surface

of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in

customize design as per direction of Engineer-in- Charge. The glass

43 11.53 mosaic tiles to be fixed on the wall surface with the help of approved SQM 20.00 3891.15 77823.00 0.00

adhesive applied at the rate of 2.5 kg per sqm and grouting of the

same. The rate is inclusive of all operation, material and required

pattern approved by Engineer-in- Charge:

FLOORING WORKS TOTAL 1051820.00 0.00

Sub Head : ROOFING

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Providing and fixing tiled false ceiling of specified materials of size

595x595 mm in true horizontal level, suspended on inter locking

metal grid of hot dipped galvanized steel sections ( galvanized @ 120

grams/ sqm, both side inclusive) consisting of main "T" runner with

suitably spaced joints to get required length and of size 24x38 mm

made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm

center to center and cross "T" of size 24x25 mm made of 0.30 mm

thick (minimum) sheet, 1200 mm long spaced between main "T" at

600 mm center to center to form a grid of 1200x600 mm and

secondary cross "T" of length 600 mm and size 24x25 mm made of

0.30 mm thick (minimum) sheet to be interlocked at middle of the

44 12.52 1200x600 mm panel to form grids of 600x600 mm and wall angle of

size 24x24x0.3 mm and laying false ceiling tiles of approved texture

in the grid including, required cutting/making, opening for services

like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main

"T" runners to be suspended from ceiling using GI slotted cleats of

size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50

mm long dash fasteners, 4 mm GI adjustable rods with galvanised

butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm

center to center along main T, bottom exposed width of 24 mm of all

T-sections shall be pre-painted with polyester paint, all complete for

all heights as per specifications, drawings and as directed by Engineer-

12.5 mm thick fully Perforated Gypsum Board tile made from

plasterboard having glass fibre conforming to IS: 2095 part I, of size

595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with

center borders of 48 mm and the side borders of 30 mm, backed with

non woven tissue on the back side, having an NRC (Noise Reduction

Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.

TOTAL OF ROOFING 382305.60 0.00

FINISHING WORKS

45 13.1 12 mm cement plaster of mix:

15 mm cement plaster on rough side of single or half brick wall of

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

18 mm cement plaster in two coats under layer 12 mm thick cement

plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick

cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with

48 13.16 6 mm cement plaster of mix:

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade:

(a) 13.62.1 Two or more coats on new work. SQM 200.00 226.25 45250.00 0.00

Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth

Distempering with 1st quality acrylic distemper (ready mixed) having

VOC content less than 50 gms/litre, of approved manufacturer, of

required shade and colour complete, as per manufacturer's

New work (two or more coats) over and including water

(a) 13.41.1 thinnable priming coat with cement primer having VOC content less SQM 700.00 185.65 129955.00 0.00

than 50 gms/litre

Wall painting with acrylic emulsion paint, having VOC (Volatile

Organic Compound ) content less than 50 grams/ litre, of approved

brand and manufacture, including applying additional coats wherever

required, to achieve even shade and colour.

Polishing on wood work with ready mixed wax polish of approved

brand and manufacture:

Applying priming coats with primer of approved brand and

54 13.85 manufacture, having low VOC (Volatile Organic Compound )

With ready mixed pink or grey primer on wood work (hard and soft

wood) having VOC content less than 50 grams/ litre

With water thinnable cement primer on wall surface having VOC

content less than 50 grams/litre

TOTAL OF FINISHING WORKS 618187.00 0.00

DISMANTLING AND DEMOLISHING

Demolishing cement concrete manually/ by mechanical means

55 15.2 including disposal of material within 50 metres lead as per direction

of Engineer - in - charge.

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

(a) 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Cum 10.00 2434.25 24343.00 0.00

(b) 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 8.00 1503.60 12029.00 0.00

Demolishing R.C.C. work manually/ by mechanical means including

56 15.3 stacking of steel bars and disposal of unserviceable material within 50 Cum 10.00 3551.25 35513.00 0.00

metres lead as per direction of Engineer - in- charge.

Extra for cutting reinforcement bars manually/ by mechanical means

57 15.5 in R.C.C. or R.B. work (Payment shall be made on the cross sectional Sqm 5.00 1147.20 5736.00 0.00

area of R.C.C. or R.B. work) as per direction of Engineerin- charge.

Demolishing brick work manually/ by mechanical means including

58 15.7 stacking of serviceable material and disposal of unserviceable material

within 50 metres lead as per direction of Engineer-in-charge.

Demolishing stone rubble masonry manually/ by mechanical means

including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per direction of

Engineer-in-charge :

Dismantling doors, windows and clerestory windows (steel or wood)

60 15.12 shutter including chowkhats, architrave, holdfasts etc. complete and

stacking within 50 metres lead :

(a) 15.12.1 Of area 3 sq. metres and below Each 5.00 367.20 1836.00 0.00

(b) 15.12.2 Of area beyond 3 sq. metres Each 5.00 502.75 2514.00 0.00

Taking out doors, windows and clerestory window shutters (steel or

wood) including stacking within 50 metres lead :

(a) 15.13.1 Of area 3 sq. metres and below Each 5.00 143.50 718.00 0.00

(b) 15.13.2 Of area beyond 3 sq. metres Each 5.00 188.90 945.00 0.00

Dismantling tile work in floors and roofs laid in cement mortar

including stacking material within 50 metres lead.

(a) 15.23.1 For thickness of tiles 10 mm to 25 mm sqm 50.00 73.40 3670.00 0.00

(b) 15.23.2 For thickness of tiles above 25 mm and up to 40 mm sqm 600.00 113.35 68010.00 0.00

Dismantling of flexible pavement (bituminus coarses) by mechanical

63 15.59 means and disposal of dismantled material uo to a lead of 1 Cum 5.00 420.80 2104.00 0.00

kilometre,as per direction of Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable,

dismantled or waste materials by mechanical means, including

64 15.60 loading, transporting, unloading to approved municipal dumping cum 25.00 263.95 6599.00 0.00

ground or as approved by Engineer-in-charge, beyond 50 m initial

lead, for all leads including all lifts involved.

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

TOTAL OF DISMANTLING AND DEMOLISHING 186613.00 0.00

Providing and laying 60mm thick factory made cement concrete

interlocking paver block of M -30 grade made by block making

machine with strong vibratory compaction, of approved size, design

& shape, laid in required colour and pattern over and including 50mm

thick compacted bed of coarse sand, filling the joints with fine sand

etc. all complete as per the direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone

of M-25 grade cement concrete in position to the required line,level

and curvature,jointed with cement mortar 1:3 (1 cement: 3 coarse

sand) including making joints with or without grooves (thickness of

66 16.69 joints except at sharp curve shall not to more than 5mm),including Cum 3.00 10117.60 30353.00 0.00

making drainage opening wherever required complete etc. as per

direction of Engineer-in-charge(length of finished kerb edging shall

be masured for payment).(Precast C.C. kerb stone shall be approved

by Engineer-in-charge).

Taking out existing CC interlocking paver blocks from footpath/

central verge, including removal of rubbish etc., disposal of

67 16.84 unserviceable material to the dumping ground, for which payment Sqm 20.00 402.95 8059.00 0.00

shall be made separately and stacking of serviceable material within

50 metre lead as per direction of Engineer-in-Charge.

Laying old cement concrete interlocking paver blocks of any design/

shape laid in required line, level, curvature, colour and pattern over

and including 50 mm thick compacted bed of coarse sand, filling the

joints with fine sand etc. all complete as per the direction of

Engineering-In-charge. (Old CC paver blocks shall be supplied by the

department free of cost).

TOTAL OF ROAD WORKS 205483.00 0.00

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular sections/

appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

69 21.1 required dia and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required including

Aluminium snap beading for glazing / paneling, C.P. brass / stainless

steel screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling and dash

fasteners to be paid for separately) :

(a) 21.1.1 For fixed portion

Polyester powder coated aluminium (minimum thickness of polyester

powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and

fixing hinges/ pivots and making provision for fixing of fittings

wherever required including the cost of EPDM rubber / neoprene

gasket required (Fittings shall be paid for separately)

Polyester powder coated aluminium (minimum thickness

of polyester powder coating 50 micron)

Providing and fixing 12mm thick prelaminated particle board flat

pressed three layer or graded wood particle board conforming to IS:

12823 Grade l Type ll, in panelling fixed in aluminum doors,

windows shutters and partition frames with C.P. brass / stainless steel

screws etc. complete as per architectural drawings and directions of

engineer-in-charge.

(a) 21.2.2 Pre-laminated particle board with decorative lamination on both sides. SQM 4.00 1115.40 4462.00 0.00

Providing and fixing double action hydraulic floor spring of approved

brand and manufacture conforming to IS : 6315, having brand logo

embossed on the body / plate with double spring mechanism and door

weight upto 125 KG, for doors, including cost of cutting floors,

embedding in floors as required and making good the same matching

to the existing floor finishing and cover plates with brass pivot and

single piece M.S. sheet outer box with slide plate etc. complete as per

the direction of Engineer-in-charge.

21.4.1 With stainless steel cover plate minimum 1.25 mm thickness EACH 2.00 2823.85 5648.00 0.00

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Providing and fixing 12 mm thick frameless toughened glass door

shutter of approved brand and manufacture, including providing and

fixing top & bottom pivot & spring type fixing arrangement and

making necessary holes etc. for fixing required door fittings like Floor

spring (Model NO. DORMA BTS65), Door handle with lock (Model

No. Dorma TG 138 Lockable Pull Handles 60") and stopper etc. with

3M flim on the glasses of sparkle type all complete as per drawing

and direction of Engineer-in-charge.

TOTAL OF ALUMINIUM WORK 33776.00 106995.00

SANITARY INSTALLATIONS

Providing and fixing water closet squatting pan (Indian type W.C.

pan) with 100mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually

controlled device (handle lever) conforming to IS:7231, with all

fittings & fixtures complete including cutting and making good the

walls and floors wherever required.

White vitreous china Orissa pattern W.C. pan of size 580x440mm

with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet

(European type W.C. pan) with seat and lid, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually

controlled device (handle lever), conforming to IS : 7231, with all

fittings and fixtures complete, including cutting and making good the

walls and floors wherever required :

(a) 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid EACH 3.00 6515.55 19547.00 0.00

Providing and fixing wash basin with C.I.brackets, 15 mm C.P.

brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting of fittings and brackets, cutting and making good

the walls where required :

White vitreous china flat back wash basin size 550 x 400 mm with

single 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin

completely recessed at the back for the reception of pipes and fittings.

Providing & fixing PVC waste pipe for sink or wash basin icluding

PVC waste fitting Complete.

(a) 17.28.2 Flexible Pipe

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Providing and fixing 600x450 mm beveled edge mirror of superior

glass (of approved quality) complete with 6 mm thick hard board

ground fixed to wooden cleats with C.P. brass screws and washers

Providing and fixing mirror of superior glass (of approved quality)

79 17.32 and of required shape and size with plastic moulded frame of

approved make and shade with 6 mm thick hard board backing :

(a) 17.32.4 Rectangular shape 1500x450 mm EACH 5.00 2093.00 10465.00 0.00

80 17.34 Providing and fixing toilet paper holder :

SANITARY INSTALLATIONS (NON-SCHEDULED ITEMS)

Supply and Installation JAQUAR 1173 CORNER GLASS SELF

Supply and Installation JAQUAR 1565 CLOTH LINER

Supply and Installation JAQUAR 35721P AKP TOWEL RING

Supply and Installation JAQUAR 35731P AKP SOAP DISH

Supply and Installation JAQUAR 35735P AKP SOAP DISPENSER

Supply and Installation JAQUAR 35741P AKP TUMBLER

Supply and Installation JAQUAR 35761P AKP CHR DOUBLE

Supply and Installation JAQUAR ALD CHR 565 HEALTH

FAUCET WITH EASY TUBE

Supply and Installation JAQUAR 35497 OHS OVERHEAD

Supply and Installation JAQUAR 15053PM OPP ANGULAR STOP

Supply and Installation JAQUAR 455L600 CHR SHOWER ARM

Supply and Installation JAQUAR 2400 SINGLE PIECE SLIM

CONCEALED CISTERN

Supply and Installation JAQUAR 15125PM OPP MS.L WALL

Supply and Installation JAQUAR 526NKN DLX BASIN INLET

Supply and Installation JAQUAR 5935 FIS WHITE TABLE TOP

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Supply and Installation JAQUAR 81953UF VGS WHT RIMLESS

Supply and Installation JAQUAR 852415 JCP CONTROL PLATE

Supply and Installation JAQUAR 35781PS AKP CHR TOWEL

Supply and Installation CHAIR BRACKET ADJ.C.I MED.W/O

Supply and Installation JAQUAR 1937 HSH HAND SHOWER

Supply and Installation JAQUAR 769L300X190 ALD BOTTOL

Supply and Installation JAQUAR 15011BPM OPL S/L/B/M

Supply and Installation JAQUAR SHA CHR 549D8 FLEXIBLE

104 NS Supply and Installation SS SQ F BRACKAT ADJUSTABLE 6" PCS 3.00 161.20 0.00 483.59

WATER SUPPLY INSTALLATIONS

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes

having thermal stability for hot and cold water supply including all

CPVC plain and brass threaded fittings including fixing the pipe with

clamps at 1.00 mt spacing. this includes jionting of pipes and fittings

with one step CPVC solvent cement and testing of joints complete as

per direction of engineer in charge.

Internal work -Exposed on Wall

(a) 18.7.1 15 mm nominal outer dia pipes RMT 5.00 286.80 1434.00 0.00

(b) 18.7.2 20 mm nominal outer dia pipes RMT 5.00 335.00 1675.00 0.00

(c) 18.7.3 25 mm nominal outer dia pipes RMT 5.00 401.55 2008.00 0.00

(d) 18.7.4 32 mm nominal outer dia pipes RMT 10.00 518.75 5188.00 0.00

(e) 18.7.5 40 mm nominal outer dia pipes RMT 10.00 702.95 7030.00 0.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot and cold water supply, including all

CPVC plain and brass threaded fittings including fixing the pipe with

106 18.8 clamps at 1.00 mt spacing. This includes jionting of pipes and fittings

with one step CPVC solvent cement and the cost of cutting chases

and making good the same including testing of joints complete as per

the direction of engineer incharge

concealed work, including cutting chases and making good the wall

(a) 18.8.1 15 mm nominal outer dia pipes RMT 5.00 497.80 2489.00 0.00

(b) 18.8.2 20 mm nominal outer dia pipes RMT 5.00 537.60 2688.00 0.00

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

(c) 18.8.3 25 mm nominal outer dia pipes RMT 10.00 627.25 6273.00 0.00

(d) 18.8.4 32 mm nominal outer dia pipes RMT 10.00 739.30 7393.00 0.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all

107 18.9 CPVC plain & brass threaded fittings. This includes jointing of pipes

& fittings with one step CPVC solvent cement, trenching, refilling

and testing of joints complete as per direction of Engineer in Charge.

(a) 18.9.2 20 mm nominal outer dia Pipes RMT 5.00 274.30 1372.00 0.00

(b) 18.9.3 25 mm nominal outer dia Pipes RMT 10.00 355.40 3554.00 0.00

(c) 18.9.6 50 mm nominal outer dia Pipes RMT 10.00 794.25 7943.00 0.00

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed ends):

Providing & Fixing ball valve (brass) of approved quality, High or

low pressure, with plastic floats complete:

Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, ISI : 12701 marked, with cover and suitable

locking arrangement and making necessary holes for inlet, outlet and

overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality

conforming to IS: 8931

Providing and fixing C.P. brass long body bib cock of approved

112 18.51 quality conforming to IS standards and weighing not less than 690

Providing and fixing C.P. brass angle valve for basin mixer and

113 18.53 geyser points of approved quality conforming to IS 8931 a) 15 mm

EXTERNAL DRAINAGE INSTALLATION

Providing and laying non-pressure NP2 class (light duty) RCC pipes

with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C.

pipes including collars/spigot jointed with stiff mixture of cement

mortar in the proportion of 1:2 (1 cement : 2 fine sand) including

testing of joints etc. complete

TOTAL OF PLUMBING WORKS 184884.00 325092.03

ELECTRICAL WORK

SUBHEAD-WIRING SYSTEM

Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, with modular

switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable etc.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed

117 1.1 medium class PVC conduit, 2 way modular switch, modular plate, Point 10.00 1562.00 15620.00 0.00

suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed medium class

PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper

conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the

119 1.1 following sizes of FRLS PVC insulated copper conductor, single core

cable in surface/ recessed medium class PVC conduit as required

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid

copper conductor PE insulated, shielded with fine tinned copper braid

and protected with PVC sheath in the existing surface/ recessed steel/

PVC conduit as required.

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including cutting the

wall and making good the same in case of recessed conduit as

Supplying and fixing two module stepped type electronic fan

122 1.3 regulator on the existing modular plate switch box including Each 30.00 369.00 11070.00 0.00

connections but excluding modular plate etc. as required.

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and fixing 3

pin 5/6 A modular socket outlet and 5/6 A modular switch,

connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and fixing 6

pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular

switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction

box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connection

etc. as required.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings

of all sizes and shapes containing upto two GLS/CFL/LED lamps per

fitting, complete with all accessories including connections etc. as

Supplying and fixing call bell/ buzzer suitable for single phase, 230

V, complete as required.

Installation, testing and commissioning of ceiling fan, including

wiring the down rods of standard length (upto 30 cm) with 1.5 sq.

129 1.5 mm FRLS PVC insulated, copper conductor, single core cable, Each 10.00 339.00 3390.00 0.00

including providing and fixing phenolic laminated sheet cover on the

fan box etc. as required.

Installation of exhaust fan in the existing opening, including making

good the damage, connection, testing, commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet

steel, MCB distribution board, 240 V, on surface/ recess, complete

131 2.3 with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"

curve, miniature circuit breaker suitable for inductive load of

following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in

133 2.1 the existing MCB DB complete with connections, testing and

commissioning etc. as required.

ELECTRICAL WORKS TOTAL 348445.00 0.00

HORTICULTURAL DEVELOPMENT WORK

Supplying and stacking of good earth at site including royalty and

134 2.2 upto 5 km complete (earth measured in stacks will be reduced by CUM 150.00 515.60 77340.00 0.00

Supplying and stacking sludge at site including royalty and carriage

km complete (sludge measured in stacks will be reduced by 8% for

136 2.5 Rough dressing the trenched ground including breaking clods. sqmt. 500.00 1.50 750.00 0.00

Uprooting weeds from the trenched area after 10 to 15 days of its

with water including disposal of uprooted vegetation.

138 2.7 Fine dressing of the ground. sqmt. 500.00 3.70 1850.00 0.00

Spreading of sludge, dump manure and/or good earth in required

139 2.8 as per direction of officer-in-charge (cost of sludge, dump manure CUM 200.00 52.35 10470.00 0.00

good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion

directed by the Officer-in-charge

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to

thickness of existing ground prepared with proper level and ramming

tools wooden (Dhurmos) and than rolling the surface with light roller

the surface smoothen and light waterning with sprinkler and

Sr. DSR RATE (Rs.) AMOUNT (Rs.)

Description of item Unit QTY.

No. 2023 DSR NDSR DSR NDSR

Site Clening Including PCC breaking, Waste removal, Old unwanted

plants removal, Old Soil excavation and removal and dispose within 1

Km from the Admin building as per the direction of Engineer in

NS Plants Supply

143 NS Flowering Shrubs - 1.5 to 2 ft Nos 1500.00 70.00 0.00 105000.00

NS Waterfall work

151 NS Waterproof Light Nos 4.00 3500.00 0.00 14000.00

153 NS Electric work In Waterbody LS 4.00 5200.00 0.00 20800.00

154 NS Stone Clading work at Statue LS 1.00 9654.60 0.00 9654.60

NS Landscape Lighting NA

Decorative Pots Supply Rotomould Including Plants, Soil, Manure

mixing and Plants Supply and Planting etc

TOTAL OF HORTICULTURAL DEVELOPMENT WORK 193894.90 495854.60