CONVERSION OF CONVENTIONAL LIGHTS INTO LED LIGHTS WITH ALLIED ACCESSORIES ALONG THE PERIMETER WALL IN TECHNICAL AREA AT AF STN BHUJ

Amount

Dismantling of metal halide flood light 60-200 watt along with its clamps, wiring from syntex box to light complete all as specified and directed by Engineer-in-Charge.

Supply & fix LED flood light 100 Watt, IP66 electronic LED driver with APFC, IK 07 exclusive die-cast aluminium body with toughened glass visor, mirror polished alluminium reflector, acrylic or polycarbonate difuser open circuit protection, over voltage protection, surge voltage protection upto 10 kv with built in SPD, lumen LED>140 lm/Watt viewing angle 120 degree suitable for highlightening architectural fixed with suitable GI clamps having two coat of enamal paint, nut bolts complete all as specified and directed by Engineer-in-Charge. Note : Contractor will arrange T&P and veh required for repairing lights and the cost for the same will be incl in the quoted rate

Supply & fix LED flood light/street light 100 Watt, IP66 electronic LED driver with APFC, IK 07 exclusive die-cast aluminium body with toughened glass visor, mirror polished alluminium reflector, acrylic or polycarbonate difuser open circuit protection, over voltage protection, surge voltage protection upto 10 kv with built in SPD, lumen LED>140 lm/Watt viewing angle 120 degree suitable for highlightening architectural fixed with suitable GI clamps having two coat of enamal paint, nut bolts complete all as specified and directed by Engineer-in-Charge. Note : Contractor will arrange T&P and veh required for repairing lights and the cost for the same will be incl in the quoted rate

Supply & fix in replacement FRP juction box of size outside dimensions 400 x 300 x 190 mm of with 4 nos copper busbar of capacity 100 Amps , length 250 mm , 01 Nos MCB SPN C series of capacity 06 Amps as approved by the Engineer-in-charge including connector and fixing on pole with and including MS clamps made out of 25 x 3mm MS flat iron, nut, bolts etc complete all as specified and directed by Engineer-in-Charge Note:- The cost of sintex box installation includes making hole of suitable size for entry and exist of cable any size, making new lugs of cables of entry and exit.

Supply & fix in replacement FRP juction box of size outside dimensions 400 x 300 x 190 mm of with 4 nos copper busbar of capacity 100 Amps , length 250 mm , 01 no of MCB TPN Amps incomer including internal wiring and 01 Nos MCB SPN C series of capacity 06 Amps as outgoing as approved by the Engineer-in-charge including connector and fixing on pole with and including MS clamps made out of 25 x 3mm MS flat iron, nut, bolts etc complete all as specified and directed by Engineer-in-Charge Note:- The cost of sintex box installation includes making hole of suitable size for entry and exist of cable any size, making new lugs of cables of entry and exit.

Supply and fixing LED street light fitting 60 watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge. Note: Contractor will arrange T&P and veh required for repairing lights and the cost for the same will incl in the quoted rate

Material & labour for wiring circuit along with earth wire from sintex box to Street light fitting with 3 run of 1.5 sqmm sizes FRLSH insulated copper conductor single core cable in suraces/recessed as required including steel conduit of size 20 mm dia with suitable clamps made out of 25X3 mm thick steel flat complete with nuts bolts and washers complete all as specified and directed by Engineer-in-Charge.

Material & labour for in replacement sub main wiring with two run of 1.5 sqmm single core, PVC insulated but unsheathed multi stranded copper cable 1100 volts conductor drawn through in steel conduit of 20mm dia (Heavy duty) not less than 1.8mm wall thickness with all accessories and one run of 1.5 sqmm PVC insulated but unsheathed multi stranded copper conductor cable as earth continuity wire with proper clamps from sintex box to light fitting complete all as specified and directed by Engineer-in-Charge. Note :- Two run of PVC cable with one run of PVC earth wire and one run of steel conduit shall be measured and paid as one length only. .

Supply & fix in side of the syntex box MCCB 4 pole 100 A with breaking capacity 16 KA complete all as specified and directed by Engineer-in-Charge.

Supply laying, jointing and testing cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc of size 70 sqmm, 3.5 core complete all as specified and directed by Engr-in-Charge.

Supply laying, jointing and testing cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc of size 50 sqmm, 3.5 core complete all as specified and directed by Engr-in-Charge.

Supply laying, jointing and testing cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc of size 25 sqmm, 4.0 core complete all as specified and directed by Engr-in-Charge.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge.

Returning filling in soil and including spreading leveling watering and well ramming in layers n.exc. 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by Engineer-in-Charge.

Material & labour for sand cushioning for UG cables using dry river sand; gently punning down complete all as specified and directed by Engineer-in-Charge. ( Note : For measurement purpose punned thickness shall be considered)

Supply & lay ISI marked & conforming to IS - 5820 - 1970 unreinforced precast concrete cable cover Class LV, type II, flate size 300mm X 180 mm X 40 mm in trenches as protection to LT UG cable complete all as specified and directed by Engineer-in-Charge.

Material & labour for straight through joint (epoxy) for LT 100 Volts grade, aluminium conductor jointing kits, aluminium ferrules and labour complete for making joints and testing complete for cable size 70 to 95 sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.

Material & labour for straight through joint (epoxy) for LT 100 Volts grade, aluminium conductor jointing kits, aluminium ferrules and labour complete for making joints and testing complete for cable size upto 50 sqmm, 4.0 core complete all as specified and directed by Engineer-in-Charge.

Material & labour for heat shrinkable indoor/ outdoor LT end terminations for LT 1100 volts grade, aluminum conductor including jointing kits, aluminium ferrules and labour complete for making joints and testing etc of cable size upto 70 Sqmm, 3.5 core complete all as specified and as directed by Eng-in-Charge.

Material & labour for heat shrinkable indoor/ outdoor LT end terminations for LT 1100 volts grade, aluminum conductor including jointing kits, aluminium ferrules and labour complete for making joints and testing etc of cable size upto 25 to 50 Sqmm, 4.0.5 core complete all as specified and as directed by Eng-in-Charge.

Material & labour for heat shrinkable sleeve suitable for LT 1100 volts grade XLPE cable of size 70 sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

MUKUL ENGINEERING (BID ID -3099314)

Abhishek Enterprises (BID ID -3105399)

M/s Bombay Novelty Stores (BID ID -3108060)