Motichur Water Supply Scheme

Pump and Related Electrical Items - Supply of Energy Efficient Submersible Pump sets of various duty parameters, IS:8034 (2002) - Pump 500LPM discharge at 100m with 20HP electric moter (TW-1 to OHT-1 )

Pump 500LPM discharge at 98m with 20HP electric moter (TW-2 to OHT-2 )

Pump 500LPM discharge at 98m with 20HP electric moter (TW-2 to OHT-2)

Supply and installation of Dry Auto transformer start ATS type starter cum panel for submersible motors incluing capacitor . For operation on 400 volts+/- 10% three phase 50 c/s AC supply complete with Cu bus bar, internal interconnection and comprising of AUTO TRANSFORMER STARTER, Electronic over load, Single phasing, reverse phasing protection relays and under and under voltage protection,with Metering & Protection calss CT, Time Delayed Capacitor duty contactor operated LT power capacitor, single phase preventor, indicating lamp, door switch with complete internal connection by copper wire & should be suitable toi integrate Multi function power meter for following duties of Pump motors. - (16-40)HP SCADA Based

IOT Based Water Monitoring System including all Sensors (Residual Chlorine sensors,Pressure sensor) ,Mechanical flow meter & all related items.

Supply & Installation of elecronically controlled, electrically actuated,diaphragm operated, chemical metering pump, wall mounting suitable for delivering up to 6 litres of chemical solution/sodium hypochlorite solution per hour under maximum delivery pressure up to 6.0 KG/cm2 and suction lift not less than 1.5 meter with accessories.

Civil Work - Supply of all Materials, Labours, T&P etc.repair of existing pump house including cost of all Labour & Fittings all complete.

Over Head Tank - Including Additional rates for staging per meter height beyond 12 m height including cost of all metrials, labour, shuttering, scaffolding T&P complete. - 75KL CWR (Existing) Reparing work

750KL OHT Staging 18.0M (Exsiting ) Reparing work

Distribution Network & Related Components - Dismantling of road - For Pipe Laying - Dismantling of flexible pavements and disposal of dismantled materialsupto alead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 (Considering 10%)

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately (Considering 10%)

Restoration of road - For Pipe Laying - construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepeared sub base with 43 grade cement or any other type PCC Grade M-30, coarse and fine aggregates conforming to IS: 383,maximum size ofcoarse aggregate notexceedin

Earthwork for cutting , filling , and disposal of surplus earth (Distribution Main) - Exacvation in pipeline trenches Excavation in ordinary soil (Loam,clay, sand) for foundation including lift up to 1.5M and lead up to 30M filling watering and ramming of Excavated the earth in to the tranches or into the side between foundation tranches or in to the plinth ( 75% of total quantity)

Excavation of soil mixted with shingle boulders etc requireing the use of spacials T&P , if any , for pipe line trenches including lift up to 1.5M and lead upto 30M with back filling waterring and ramming of Excavated earth in the trenches (25% of total quantity)

GI pipe for water supply conforming to IS : 1239.1.2004 proving of all materials , carting from site stone to site of work , laying and jointing of GI Screwed pipes (including supply of all jointing materials like specials white lead , hemp and oil etc ) in trenches with its cutting , threading and testing of pipe line etc. complete. - 15mm

HDPE pipe for water supply conforiming to IS:4984-1995 - Proving of all materials, carting from site store to site of work, lowering into trenches with true to alignment , laying &jointing of full length of HDPE pipes , complition of work with testing of pipe line including supply of jointing materials & specials - 63mm dia pipe

75mm dia pipe

90mm dia pipe

110mm dia pipe

DI pipe conforming to IS8329/2000 Providing of all matirials ,carting from site stone to site work , lowering into trenches with true to alignment , laying and jointing of full length S&S centrifugally cast (spun) ductile iron pipes by overlap fusion joint including supply of EPDM rubber gaskets conforming to IS5382-1985 with testing of pipe line complete - 150mm dia pipe

200mm dia pipe

250mm dia pipe

Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS: 9523-2000 (5% of DI Pipe weight)

Supply of D.I valves Including carting the same upto the site of work as pr engineering norms (with cap ) complete with bolts , nuts , rubber inserting etc. anywhere in uttrakhand - 50mm dia

65mm dia

80mm dia

100mm dia

150mm dia

200mm dia

250mm dia

Installation, testing and commissioning of DI valve as per engineering norms anywhere in uttrakhand - D.I Sluice/Gate Valve - 50mm dia

65mm dia

80mm dia

100mm dia

150mm dia

200mm dia

250mm dia

Supply of sluice valves (scouring purpose) Including carting the same upto the site of work as per engineering norms (with cap) comlete with bolts nuts , rubber insertions etc. anywhere in uttrakhand - 65mm dia

Installation , testing and commissioning of sluice valve (scouring porpous)as per engineering norms anywhere in uttrakhand. - 65mm dia

Supply of air valves as per engineering norms of approved quality with bolts , nuts, rubber insertions etc. complete anywhre uttrakhand. - 50mm dia

80mm dia

Instaling, testing and commissioning of air valves as per engineering anywhere in uttrakhand. - DI Air valve along with isofating valve - 50mm dia

80mm dia

Supplying and Fixing of Fire Hydrant Valve IS 5290 (Flanged) Including carting the same upto site of work and fixing the same and water supply line Including the cost of valves, specials, labour and T&P Complete in all respect. - 80mm dia

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. For different types of valves.

Supply , installatin , testing and Commissioning of full bore Electromagnetic Flow meter for lines of following sizes comprising of flow tube sensor with transmitter cum Display unit and facility to provide dadta communication signal over modbus 485 port pulse output and 4-20mA Singnal output with flanges, clamps etc. - 250mm

Supply of all labour, material required for restoring of existing house connection which might be damage during excavation and also shifting all existing connection to new water supply system from existing water supply system complete as per unit estimate and directed by Engineer in-charge. 15 mm size water connections.(Considering 90% of 2020 Households)

Providing and making house service connections from water supply distribution GI pipe line upto water meter chamber inside the property using GI pipe including supply and fixing of electrofussion saddle ,brass ferrules elbow, ball valve etc complete with earthwork , road cutting with restoration works.

Providing and erecting 2.00 m hight temporary barricading at site , each panel of size 2.50mX2.00m made of 40X40X6mm angle iron or 50X50X3mm hollow MS tube osts/ horizontal members/ bacings coverd with 1.63mm thick MS sheet . The sheet shall be fixed with 30X5mm MS flat by suitable welding / riviting. The panels shall be made so that gap of 50cm above the ground is available making overali height as2.5m

Operation Maintance & Pipe testing - O&M for trial and testing of pipe

Testing of Pipes (G.I ,HDPE & D.I) which includes a) Parameters(Physical & Chemical) b) Tensile Sterngth Properties