Shifting of HT OR LT line and Sub Station and Reconstruction

Amount

Supply of 11.0 mtr. long Steel Tubular Pole (Designation 410: SP-54) conforming to ISS: 2713 (P-I & II)-1980 with base plate

Supply of 9.0 mtr. Long (Designation 410: SP-32) Steel Tubular Pole conforming to ISS: 2713 (P-I & II)-1980 with base plate

Supply of 9.0 mtr. Long PCC Pole, 200Kg. Working load as per specification and drawing.

Supply of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp,Nuts & Bolts etc. as required and making complete in all respect.

Supply of hot dip (heavy duty) galvanized stay stranded wire of size 7/2.5 mm. grade - IV as per ISS:2141/1979 having minimum tensile strength 700N mmsq. with Zinc coating (heavy type coating conforming to IS:4826/1979, weight 260 Kg. 1 Km.)

Supply of 11KV Guy/Stay Insulator as per IS Specification

Supply of MS Channel (100x50x50x6mm) as per IS Specification

Supply of MS Channel (75x40x40x6mm) as per IS Specification

Supply of MS Angle (65x65x6mm) as per IS Specification

Supply of MS Angle (50x50x6mm) as per IS Specification

Supply of febricated clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primer coating

Supply of Polimer insulators with hardware fittings, hardware etc. as required as per the technical specification, approved drawing and scope of work. 11KV Pin insulator with hardware fittings.

Supply of Polimer insulators 45KN with hardware fittings, hardware etc. as required as per the technical specification, approved drawing and scope of work. 11KV disc insulator with hardware fittings.

Supply of Brown glazed porcelain shackle insulator of size 90x75 mm with hole diameter 15 mm for low voltage line of mechanical strength 11.5 KN conforming of 2 ISS:1445/1977

Supply of G.I. Straps and Bolts, 185 mm x 30 mm x 3 mm including Supply of Nuts & Bolts etc. as required with shackle insulator

Supply of ACSR(6/1/3.35 sq.mm) Rabbit

Supply of 8 SWG G.I wire as per ISS : 280/1978 amended latest with heavy coating as per ISS : 4826 I 1968 of tensile strength 55 to 95 Kgf /mm.

Supply of 11KV distribution class Lightening arrestor, (9KV,5KA) for DT as per technical specification approved drawing & scope of works

Supply of triple pole (3 phase), 12 KV, 200 Amp. drop out fuse unit (Porcelin type) for operation in 11 KV, 50 Hz, AC system as per relevant IS specification and approved drawing.

Supply of 11KV 3-Phase, vertical mounting type, gang operated, AB Switch (Porcelin type) along with support insulator, base channel, down pipe, arching horn etc.complete as per relevant IS specification. and approved drawing.

Design, manufacturing, Testing at works supply and transportation of 200KVA, BIS certified (label-2) 11/0.433-0.250KV, 3 Phase, 50HZ, Distribution transformer conforming to IS: 1180 (Part-I)-2014 with latest ammendment and as per technical specification given in bid document.

Supply of PVC cable 2.5 sqmm single core 1.1KV as per technical specification

Supply of PVC cable 16 sqmm single core 1.1KV as per technical specification

Supply of PVC cable 70 sqmm single core 1.1KV as per technical specification

Supply of single circuit rewireable porcelain Kit-kat fuse unit 200Amp of 500V grade as per relevant IS specification.

Supply of Bi-metallic lugs 70 sqmm as per drawing

Supply of Bimetalic Lugs 185 sqmm as per drawing

Supply of MS Nuts & bolts 16x75mm ISI Marked

Supply of MS Nuts & bolts 16x250mm ISI Marked

Supply of 3 Phase 3 Core 185 Sq. mm. XLPE insulated power cable 6.35/11KV(E) Aluminium.

Supply of 3½ Core XLPE power cable of 1.1 KV grade 35sqmm.

Supply of 125mm outer dia HDPE Pipe (PE-100 grade) minimum 7.4mm, maximum 8.2mm.

Supply of 125 mm outer dia GI pipe (heavy duty). IS: 1239 (Part-I)-1990

Supply of 2.5mtr. Long , 40mm dia G.I.Pipe as per relevant IS & technical specification.

Supply of 60Kg Salt & 55Kg Charcoal ( For 1 earth Pit).

Supply of Outdoor heat shrink type end jointing kit for XLPE insulated Cable of grade 6.35/11KV (E), 185 Sq.mm. Size.3 core

Supply of straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :

Schedule-B (Erection)

Erection of 9 mtrs length of Steel Tubular POLE at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Erection of 11mtrs length of Steel Tubular POLE at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Erection of 9.0 mtrs length of P.C.C Pole at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with with soil upto the ground level, ramming and making complete in all respect.

Erection of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/2.5 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp, Nuts & Bolts etc. as required. and making complete in all respect.

Erection of M.S.Channel Cross-Arm, 2.8 Mtr. Long 75 x40 x 40 x 6 mm (Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm, 2.2Mtr. Long 75 x40 x 40 x 6 mm (Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm, 2.8 Mtr. Long100 x50 x 50 x 6 mm (Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm, 0.8 Mtr. Long100 x50 x 50 x 6 mm (Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm exceeding 2.8 Mtr. Long 100 x50 x 50 x 6 mm (Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Angle Cross-Arm, 2.8 Mtr. Long 65 x65 x 6 mm (Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of shackle insulator of size 75mm x 90mm /100mm x 15mm with straps & bolts/U clamp on poles (Excluding the cost of straps/ U Clamp, Nuts & Bolts)

Erection of 11KV Polimer Pin insulator

Erection of 11KV Polimer Disc insulator set along with necessary fittings.

Earthing with G.I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing (excluding supply of G.I.Pipe, Salt & Charcoal, Gi wire, nuts &bolts, etc. as required)

Laying of 8 SWG GI wire at 300mm below the ground level for earthing of Sub-Station equipments from the earth electrode

Erection of 11KV protective Guarding by GI wire 8 SWG as per technical specification,across road/River/Telecom line etc. in horizonta formation complete .

Febrication of different sizes Cross-Arms by MS Channel/MS Angle as per specification

Laying & Stringing of 1KM (Single Conductor) ACSR 6/1/3.35 mm dia 'RABBIT' including hoisting & binding etc. Complete as required.

Laying & strining of 1KM (Single Conductor), 8SWG GI wire including hoisting & binding etc. Complete as required.

Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification.

Erection of 11KV DOF unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp,Nuts & Bolts)

Erection of 11KV 200 Amp. GOS unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp,Nuts & Bolts)

Installation/Positioning of 11/0.430KV,3-Phase 200KVA of Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Erection of 11KV KIOSK at Temple yard in/c neccessry connection as reqd.

Providing sub-station fencing by 75x25 mesh size 2.5x1.5 mtr. And height of 1.5 mtr.as per Engineering requirement by 9 nos MS angle post (50x50x6mm) of height 2 mtr. Hrizental bar 6x3.5mtr and vertical bar 10x1.5mtr. Of MS flat 35x6mm and single part of MS Grill door of size L-1.5/B-1.2 mtr. with locking arrangement i/c neccessary grouting and painting by Al. paint over red oxide priming of approved quality as reqd. as per TS in/c supply of all materials(MS Angle willbe supplied by the Deptt. free of cost ).

Providing and executing cement concrete work 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20mm nominal size) for grouting of steel tubular pole (14nos.x 0.273cum per pole)

Removed old paint and preparing the surface with sand paper etc.

a)9 mtr. Long steel pole --- 10 nos

b)11mtr. Long steel pole ---- 4 nos

Applying priming coat with redimixed genuine red paint of approved quality on steel work.

a) 9 mtr. Long steel pole --- 10 nos

b)11mtr. Long steel pole ---- 4 nos

Painting (two or more coatsas reqd)with alluminium paint of approved quality on steel work (make Burger/Nerolac).

a)9 mtr. Long steel pole --- 10 nos

b)11mtr. Long steel pole ---- 4 nos

c)M.S channel /Angle /Clamp as reqd.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Trench Size: Width-350mm, Hieght-1200mm / Sand(couhioning): Hieght-250mm, Width-350mm/ Protection: Double layer Bricks 185sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11KV grade of all size in the GI/HDPE for riser including tieup of Pipe with pole by the help MS Flat Clamp (excluding cost of Clamp and Nut&Bolts) as required 185 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11KV grade of following size in the existing RCC/ HUME/ METAL pipe as required 185 sqmm

Manually digging /drilling horizontally or diagonali direction for road crossing / Water supply line/Telcomunication line/Gas Pipe line etc. including Laying of 64 to 200mm dia GI pipe direct into the earth at a depth of minimum 1100mm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and direction of Engineering In Charge.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Trench Size: Width-350mm, Hieght-750mm / Sand (couhioning): Hieght-250mm, Width-350mm/ Protection: Double layer Bricks 35 sq.mm (3½ Core)

Jointing of outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 185sqmm (3-Phase 3-core)

Jointing of outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 185sqmm (3-Phase 3-core)

Providing of Pre-cast cement concretecable identification route marker (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits as per design, drawing and specification of TSECL. The marker shall be embossed "DANGERS: TSECL, ELECTRIC POWER CABLE" with Black colour letter(both side). The visible part shall be painted with Yellow colour japan paint. (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits.

Dismantling of 9.0 mtrs length of P.C.C Pole at any kind of soil including excavation of earth, refilling the pit with with soil upto the ground level, ramming and making complete in all respect.

Dismantling of 8.0 mtrs length of Steel Tubular Pole at any kind of soil , including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Dismantling of 11.0 mtrs length of Steel Tubular Pole at any kind of soil , including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Dismantling of Stay set from the earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. and making complete in all respect.

Dismantling of M.S.Angle Cross-Arm, 1.0 to 1.6 Mtr. Long 65X65X6 mm with nuts & bolts complete as required.

Dismantling of M.S.Channel Cross-Arm, 0.3 to 1.6 Mtr. Long 75X40X40X6 mm with nuts & bolts complete as required.

Dismantling of M.S.Channel Cross-Arm, 2.2 to 2.8 Mtr. Long 75X40X40X6 mm with nuts & bolts complete as required.

Dismantling of M.S.Channel Cross-Arm, 0.6 to 2.8 Mtr. Long100 x50 x 50 x 6 mm with nuts & bolts complete as required.

Dismantling of "V" Cross-Arm, 65X65X6 mm MS Angle/ 75X40X40X6 mm MS Channel with nuts & bolts complete as required.

Dismantling of M.S.angle Cross-Arm 2.8 Mtr. Long 65x65x6mm mm with nuts & bolts complete as required.

Dismantling of 11KV Pin insulator along with Pin.

Dismantling of 11KV Single Disc insulator set along with necessary fittings.

Dismantling of 11KV protective Guarding by GI wire 8 SWG as per technical specification, across road/ River/ Telecom line etc. in horizonta formation complete .

Dismantling of (Single Conductor) ACSR 6/1/2.59 mm dia 'WEASEL' including Coiling etc. Complete as required.

Dismantling of (Single Conductor) ACSR 6/1/3.35 mm dia (Rabit) including Coiling etc. Complete as required.

Dismantling of 11KV DOF unit set of three nos. including necessary connections .

Dismantling of 11KV 200 Amp. GOS unit set of three nos. including necessary connection .

Dismantling of 11/0.430KV,3-Phase 315KVA of Distribution Transformer on Pole with necessary connections .

Dismantling of LT cutout (set of 3nos)on wooden plank (preferably karai wood )size of 24"x10"x1.5"& cable connection with termination by lugs/thimble complete(i/c supply of wooden plank,screws,& MS clamp excluding cost of thimble)

Dismantling of 11KV KIOSK at Temple yard in/c neccessry connection as reqd.

Dismantling of LT KIOSK using for service connection at Temple yard in/c neccessry connection as reqd

Dismantling of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of 185sqmm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Carriage of 11/0.430, 3-Phase 315KVA by Mechanical Transport from the Site to Workshop site Vis-a-vis including loading, unloading , as required, (back carrige) Upto the lead range 25KM

Back Carriage of 9.0 mtrs length of P.C.C Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required (back carrige) Upto the lead range 25KM

i) For maximum 6 (six) poles

ii) Beyond 4 (four) poles

Back carriage of 8.0mtrs length of Steel Tubular Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required Upto the lead range 25 KM

i) For maximum 8 (eight) poles

ii) Beyond 8 (eight) poles

Back Carriage of 11.0mtrs length of Steel Tubular Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required (back carrige) Upto the lead range 25 KM

i) For maximum 6 (six) poles

Back Carriage of materials such as Cable,AAC, AAAC, ACSR, G.I.Wire,Cross-Arm,Stay Set,Insulators etc., by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required, upto the lead of 25KM & 50KM. (back carrige) Upto the lead range 25KM

Back Carriage of G.O.S, D.O.F,L.A,etc., by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required (back carrige) Upto the lead range 25KM

ADHIR DEBNATH