PROVIDING SEATING ARRANGEMENTS IN Q LINES AT SOUTH SIDE OF NEW ANIVETTI MANDAPAM AT UP HILL OF S V S DEVASTHANAM, DWARAKA TIRUMALA

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 1000m and 1m additional lift charges over the initial depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.complete for finished item of work. (APSS No. 402)

Making holes above 18mm dia in cc/any stones above 50 mm thick and Pressure grouting the drilled holes with neat cement slurry or with approved epoxy bonding agent using pump including all material charges , labour charges etc complete for finished item of work.

Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

Plastering with CM (1:3) 12mm thick single coat using the best river sand including cost and conveyance of all materials , labour charges and curing, etc complete complying with standard specifications and directed during execution of the work.

Labour charges only for fixing of available MS frames( 6'x5') to the existing Vetical pipes in Q-lines with welding joints as directed by engineer-in-charge, cutting the base plates of frames wherever required including conveyance of M.S frames from store to site lead upto 1000m,loading&unloading charges, weghing the frames at nearest weigh bridge, welding rods, binding wire, power charges and labour charges for fixing in position , etc complete for finished item of work.

Cost,Supply, fabrication and fixing of mild steel works for sitting frames in q-lines (Make:Tata/jindal) of any size & design including cost & conveyance of M.S pipes, welding rods, power charges and labour charges for fabricating and fixing in position , etc complete for finished item of work.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM - D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water including specials lile bends, elbows, Tee, couplers and other necessary items including clamping to walls with MS heavy duty clamps etc. complete for finished item of work (IS 15778:2007) (28.6mm OD Pipe - SDR 13.5) (Brand and model to be approved by the department) (Ashirvad, Astral, Prince)

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM - D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water including specials like bends, elbows, Tee, couplers and other necessary items, including clamping to walls with MS heavy duty clamps etc. complete for finished item of work (IS 15778:2007) (22.20mm ODPipe - SDR 13.5) (Brand and model to be approved by the department) (Ashirvad, Astral, Prince)

Fabrication, supply and fixing of Stainless Steel Drinking water sinks with SS-304 Grade sheets 16 gauge thickness and other necessary fittings etc, including provision for proper positioning and fixing to existing MS queue lines, walls etc., Holes provision to be provided for fixing of 2 no.s taps and one waste plug installation for each sink (material,design and dimesions to be approved by departmental authorities). The edges of any holes in the sink shall not show evidence of undulation, chips, cracks or any other defect which would impair Its appearance or performance., with a fall to the waste outlet. using stainless steel welding rods including cutting, buffing, polishing, lacquer finishing, Computerised Engraving Required name of visible size on Each sink (E.g. JALAPRASADAM) labour charges, transportation, unloading, weighment and fixing in any required location in and around temple premises, without any dents or scratches etc., complete as per directions of Engineer-in-charge.

Supply and fixing of fully threaded Stainless steel 304 grade waste water couplings 3” size for sinks, including cap, sink jalli, Rust-proof, heavy duty deck mounting type, lever handle type including delivery and installation to sinks at various places in Devasthanam. (Brand and model to be approved by the department)

Supply and fixing of Brass with Chrome finish Push Cocks for SS sinks, wall mounted type, including round plate and fixing with necessary accessories like 3/4 to 1/2 inch CPVC BT elbow or any other accesories, Rust-proof, heavy duty including delivery and installation to sinks at various places in Devasthanam. (Brand and model to be approved by the department) (Cera, L&K, Jaquar, Parryware)

Supplying and fixing of SWR/ PVC pipes 50mm dia (as per ISI standards) 4 Kg/Sq.cm. Prince/sudhakar or any ISI brand and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 8 1326) 50mmdia (Brand and model to be approved by the department) (Sudhakar/ Ashrivad/ Godavari)

Supplying and fixing of 32mm to 50mm PVC FTA of approved brand for waste water coupling for SS sinks (as per ISI standards) including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work. (Brand and model to be approved by the department) (Sudhakar/ Ashrivad/ Godavari)

Supplying and fixing of 1 Inch CPVC ball valve of approved brand for waste water coupling for SS sinks (as per ISI standards) including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work. (Brand and model to be approved by the department) (Ashirvad, Astral, Prince)

Supplying and fixing of 3/4 Inch CPVC ball valve of approved brand for waste water coupling for SS sinks (as per ISI standards) including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work. (Brand and model to be approved by the department) (Ashirvad, Astral, Prince)

Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Painting to new walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. of approved brand and colour over a base coat of appropriate primer of approved brand,of first grade making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and operational, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work as per SS911 for External walls.

Providing and fixing MS-Powder Coated Aldrop (IS:2681)250 mm long with necessary screws etc. Complete.

Providing and fixing MS-Powder Coated Aldrop (IS:2681)200 mm long with necessary screws etc. Complete.