Loading
Loading…
Loading…
Tender ID
Tender Value
₹2.1 L
EMD Value
₹4,220
Closing Date
15 Apr 2026, 4:00 pmClosed
Executive Engineer PHE Division Sopore
Executive Engineer PHE Division Sopore
Re-Modelling of PHE Control Room including Renovation of office Building Sopore under District Capex Budget 2025-26
2026_PHE_306734_1
ENIT No. 28/PHE/SPR of 03/2026 dated 25-03-2026
Open Tender
Civil Works
Percentage
15 days
Sopore
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
Executive Engineer PHE Division Sopore
₹4,220
Yes
25 Mar 2026
25 Mar 2026
16 Apr 2026
25 Mar 2026
15 Apr 2026
25 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1mm thick | |||||
| 2Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work 9two or more coats) over and including priming coat with water thinnable cement primer | |||||
| 3Removing white or colour was by scrapping and sand preparing the surface smooth including necessary repairs to scratches etc complete | |||||
| 4Providing and laying Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturers) of Ist quality conforming to IS : 15622 of approved make, laid on 20mm thick bed of cement mortar 1 : 4 (1 cement : 4 coarse sand) including pointing the joints with white cement and manufacturing pigment etc complete. In colour such as white, ivory, grey, fume red, brown | |||||
| 5Providing and fixing of PVC wall panelling of 5mm thick ISI - marked PVC decorative panels of approved brand, design and shade fixd with adhesive/fasteners including all necessary fitting such as corners, joints, end caps, screws, adhesives, edge trims etc complete in all respects as per direction of Enginee incharge | |||||
| 6Providing and fixing brass bib cock of approved quality 15mm nominal bore | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.31 MB
BOQ_995771.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .