REPAIR, MAINT AND REPLACEMENT OF LT PANELS, APFC PANELS, FEEDER PILLAR BOXES AND MISC ITEMS AT AF STN BHUJ

Supply & fix in replacement fabricating outdoor LT feeder distribution panel (CPRI Approved) LT electrical distribution panel board floor mounted cubicle type suitable for one incoming ACB and nine outgoing MCCBs, one multifunction LED Meter dust proof weather proof vermin proof asthetically designed having at least IP-54 degree of ingress protection fabricated from 3.15 mm thick CRCA sheet with front and rear opening including 4 strip of copper bus bar 800 amp capacity insulated colour sleeves precilin/ cable alloy with provn of epoxy insulator rail channel connector, danger notice board made out of 14 gauge CRCA Sheet over angle iron frame of size 60x60x8 mm, 30 cm grouted in groung floor and 45 cm above GL including connection with suitable copper cable FRLSH PVC single core . Suitable glands to be provided for incoming and outgoing cables,Cost of PCC work reqd for fixing of LT panel shall be included in quoted rate complete all as specified and as directed by the Engineer-in-Charge. (i) ACB 4 Pole, 415 V, with Thermal Magnatic Release (Manual Fixed type) of capacity 630 Amps (I/C)-01 (ii) MCCB 4 POLE 415 V 250 A (36 KA), 4 pole with adjustable thermal setting )O/G) - 02 (iii) MCCB 4 POLE 415 V 200 A (36 KA), 4 Pole with adjustable thermal setting (O/G)-01 (iv) MCCB 4 POLE 415 V 160 A (36 KA), 4 pole with adjustable thermal setting (O/G)-01 (v) MCCB 4 POLE 415 V 100 A (36 KA), 4 pole with adjustable thermal setting (O/G)-03 (vi) MCCB 4 POLE 415 V 63 A (16 KA), 4 pole with adjustable thermal setting (O/G)-02 (vii) Phase indicator lamps, modular, LED ty[e (R-Y-B) - 03 Nos (ix) LED Multifunction Meter Input voltage measurement range 17-520 VAC (P-P) Aux supply 90-300 VAC Flush mounting 96 x 96m Site selectable 1A / 5A CT

Supply & fix in replacement fabricating outdoor LT feeder distribution panel (CPRI Approved) LT electrical distribution panel board floor mounted cubicle type suitable for one incoming MCCB and three outgoing MCCBs, one multifunction LED Meter dust proof weather proof vermin proof asthetically designed having at least IP-54 degree of ingress protection fabricated from 3.15 mm thick CRCA sheet with front and rear opening including 4 strip of copper bus bar 600 amp capacity insulated colour sleeves precilin/ cable alloy with provn of epoxy insulator rail channel connector, danger notice board made out of 14 gauge CRCA Sheet over angle iron frame of size 50x50x6 mm, 30 cm grouted in groung floor and 45 cm above GL including connection with suitable copper cable FRLSH PVC single core . Suitable glands to be provided for incoming and outgoing cables,Cost of PCC work reqd for fixing of LT panel shall be included in quoted rate complete all as specified and as directed by the Engineer-in-Charge. (i) MCCB 4 POLE 415 V 350 A (36 KA), 4 pole with adjustable thermal setting (O/G)-01 (ii) MCCB 4 POLE 415 V 250 A (36 KA), 4 pole with adjustable thermal setting (I/C)-01 (iii) MCCB 4 POLE 415 V 200 A (36 KA), 4 pole with adjustable thermal setting (O/G)-01 (iv) MCCB 4 POLE 415 V 100 A (25 KA), 4 pole with adjustable thermal setting (O/G)-01 (v) Phase indicator lamps, modular, LED type (R-Y-B)-03 Nos (vi) LED Multifunction Meter Input Voltage measurement range 17-520 VAC (P-P) Aux supply 90-300 VAC Flush mountng 96 x 96mm Site selectable 1A/5A CT

Supply & fix in replacement fabricating outdoor LT feeder distribution panel (CPRI Approved) LT electrical distribution panel board floor mounted cubicle type suitable for one incoming ACB and six outgoing MCCBs, (size of panel 115x100x23cm) one multifunction LED Meter dust proof weather proof vermin prooof asthetically designed having atleast IP-54 degree of ingress protection fabricated from 3.15mm thick CRCA sheet with front and rear opening including 4 strip of copper bus bar 800 amp capacity insulated colour sleeves precilin/cable alloy with provn of epoxy insulator rail channel connector, danger notice board made out of 14 gauge CRCA sheet over angle iron frame of size 60x60x8mm 30 cm grouted in ground floor and 45 cm above GL including connection with suitable copper cable FRLSH PVA single core, Suitable glands to be provided for incoming and outgoing cables, Cost of PCC work reqd for fixing of LT panel shall be included in quoted rate complete all as specified and as directed by the Engineer-in-Charge. (i) ACB 4 Pole, 415 V with Thermal Magnetic Release (Manual Fixed type) of capacity 630 Amps (I/C)-01 (ii) MCCB 4 POLE 415 V 350 A (36 KA), 4 pole with adjustable thermal setting (O/G)-02 (iii) MCCB 4 POLE 415 V 200 A (36 KA), 4 pole with adjustable thermal setting (O/G)-02 (iv) MCCB 4 POLE 415 V 100 A (25 KA), 4 pole with adjustable thermal setting (O/G)-02 (v) Phase indicator lamps, modular, LED type (R-Y-B)-03 Nos (vi) LED Multifunction Meter Input Voltage measurement range 17-520 VAC (P-P) Aux supply 90-300 VAC Flush mountng 96 x 96mm Site selectable 1A/5A CT

Supply & fix in replacement fabricating outdoor LT feeder distribution panel (CPRI Approved) LT electrical distribution panel board floor mounted cubicle type suitable for one incoming ACB and seven outgoing MCCBs, one multifunction LED Meter dust proof weather proof vermin proof asthetically designed having at least IP-54 degree of ingress protection fabricated from 3.15 mm thick CRCA sheet with front and rear opening including 4 strip of copper bus bar 1000 amp capacity insulated colour sleeves precilin/ cable alloy with provn of epoxy insulator rail channel connector, danger notice board made out of 14 gauge CRCA Sheet over angle iron frame of size 60x60x8 mm, 45 cm grouted in groung floor and 45 cm above GL including connection with suitable copper cable FRLSH PVC single core. Suitable glands to be provided for incoming and outgoing cables,Cost of PCC work reqd for fixing of LT panel shall be included in quoted rate complete all as specified and as directed by the Engineer-in-Charge. (i) ACB 4 POLE 415 V with Thermal Magnetic Release (Manual Fixed Type) of capacity 800 Amps (I/C)-01 (ii) MCCB 4 POLE 415 V 400 A (36 KA), 4 pole with adjustable thermal setting (O/G)-02 (iii) MCCB 4 POLE 415 V 200 A (36 KA), 4 pole with adjustable thermal setting (O/G)-03 (iv) MCCB 4 POLE 415 V 100 A (25 KA), 4 pole with adjustable thermal setting (O/G)-02 (v) Phase indicator lamps, modular, LED type (R-Y-B)-03 Nos (vi) LED Multifunction Meter Input Voltage measurement range 17-520 VAC (P-P) Aux supply 90-300 VAC Flush mountng 96 x 96mm Site selectable 1A/5A CT

Supply & fix in replacement fabricating outdoor LT feeder distribution panel (CPRI Approved) LT electrical distribution panel board floor mounted cubicle type suitable for one incoming MCCB and four outgoing MCCBs, one multifunction LED Meter dust proof weather proof vermin proof asthetically designed having at least IP-54 degree of ingress protection fabricated from 3.15 mm thick CRCA sheet with front and rear opening including 4 strip of copper bus bar 600 amp capacity insulated colour sleeves precilin/ cable alloy with provn of epoxy insulator rail channel connector, danger notice board made out of 14 gauge CRCA Sheet over angle iron frame of size 50x50x6 mm, 30 cm grouted in groung floor and 30 cm above GL including connection with suitable copper cable FRLSH PVC single core . Suitable glands to be provided for incoming and outgoing cables,Cost of PCC work reqd for fixing of LT panel shall be included in quoted rate complete all as specified and as directed by the Engineer-in-Charge. (i) MCCB 4 Pole, 415 V, 400A (36 KA), 4 Pole with adjustable thermal setting (I/C)-01 (ii) MCCB 4 POLE 415 V 250 A (36 KA), 4 pole with adjustable thermal setting (O/G) - 02 (iii) MCCB 4 POLE 415 V 100 A (36 KA), 4 Pole with adjustable thermal setting (O/G)-02 (iv) Phase indicator lamps, modular, LED ty[e (R-Y-B) - 03 Nos (ix) LED Multifunction Meter Input voltage measurement range 17-520 VAC (P-P) Aux supply 90-300 VAC Flush mounting 96 x 96m Site selectable 1A / 5A CT

Supply & fix in replacement fabricating outdoor LT feeder distribution panel (CPRI Approved) LT electrical distribution panel board floor mounted cubicle type suitable for one incoming MCCB and three outgoing MCCBs, one multifunction LED Meter dust proof weather proof vermin proof asthetically designed having at least IP-54 degree of ingress protection fabricated from 3.15 mm thick CRCA sheet with front and rear opening including 4 strip of copper bus bar 400 amp capacity insulated colour sleeves precilin/ cable alloy with provn of epoxy insulator rail channel connector, danger notice board made out of 14 gauge CRCA Sheet over angle iron frame of size 50x50x6 mm, 45 cm grouted in groung floor and 45 cm above GL including connection with suitable copper cable FRLSH PVC single core. Suitable glands to be provided for incoming and outgoing cables,Cost of PCC work reqd for fixing of LT panel shall be included in quoted rate complete all as specified and as directed by the Engineer-in-Charge. (i) MCCB 4 POLE 415 V 200 A (36 KA), 4 pole with adjustable thermal setting (I/C)-01 (ii) MCCB 4 POLE 415 V 100 A (36 KA), 4 pole with adjustable thermal setting (O/G)-03 (iii) Phase indicator lamps, modular, LED type (R-Y-B)-03 Nos (iv) LED Multifunction Meter Input Voltage measurement range 17-520 VAC (P-P) Aux supply 90-300 VAC Flush mountng 96 x 96mm Site selectable 1A/5A CT

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil soil complete all as specified and directed by Engineer-in-Charge.

Returning filling in soil and including spreading leveling watering and well ramming in layers n.exc. 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by Engineer-in-Charge.

Material & labour for sand cushioning for UG cables using dry river sand; gently punning down complete all as specified and directed by Engineer-in-Charge. ( Note : For measurement purpose punned thickness shall be considered)