CSCs

Drilling of 250mm dia Single Under Reamed Piles of 3.60 mts depth using VRCC(1:2:4) including C&C of all amterials and all labour charges etc., complete Piles

Stone dust filling in basement with watering and tamping including cost and conveyance of all materials and all labour charges etc complete. toilet and urinals inside

PCC(1:4:8) using 40mm HBG metal including cost and conveyance of all materials and all labour charges etc complete. toilet and urinals inside

Vibrated Reinforced Cement Concrete(1:2:4) using 20mm HBG chips including cost and conveyance of all materials and all labour charges etc. but excluding cost of steel and its fabrication charges. column

Vibrated Reinforced Cement Concrete(1:2:4) using 20mm HBG chips including cost and conveyance of all materials and all labour charges etc. but excluding cost of steel and its fabrication charges.charges Plinth beam A/R

Vibrated Reinforced Cement concrete (1:2:4) using 20 mm HBG chips including cost and conveyance of all materials and all labour charges etc.but excluding cost of steel and its fabrication charges Roof beams & Cross walls

Vibrated Reinforced Cement concrete (1:2:4) using 20 mm HBG chips including cost and conveyance of all materials and all labour charges etc.but excluding cost of steel and its fabrication chargescharges Roof slab & Cross beam

Vibrated Reinforced Cement concrete (1:2:4) using 20 mm HBG chips including cost and conveyance of all materials and all labour charges etc.but excluding cost of steel and its fabrication chargescharges Roof slab for 115mm thick.

Brick Masonary in CM(1:6) using Country Bricks inclufding Cost and conveyance of all materials and all labour charges etc complete

Cost, supply of Steel (FE-500) including fabrication charges and all labour charges etc. complete

Celling Plastering with CM (1:4) mix 8 mm thick including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortor, finishing scafolding, lift charges, including cutting of grooves where ever necessary as directed by Engineer-in-Charge curing etc., complete for finished item of work

Plastering in CM(1:5) with 12mm thick including cost and conveyance of all materials and all labour charges etc complete.

Flooring with ceramic tiles 8 to 10mm thick 1st quality non skid floor tiles of scratch free of nano finish of size 600x600mm of IS: 13711,13712,13630 of any colour set over a base coat of CM (1:8) 12mm thick over already laid cement concrete bed including neat cement slurry at 3.30 kgs per sqm and jointing neatly with white cement paste to full depth of slabs laid on already laid cement concrete bed set over base coat of CM (1:8) 12mm thick including neat cement slurry spread at 3.30 kgs per sqm and jointing to full depth of ceramic tiles including cost and conveyance of all materials and labour charges, filling joints neatly, dressing of flooring stones, etc., (IC 7-6)

Providing dadooing to walls with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., complete for finished item of work.

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm x 440 mmx260mm

Painting to new walls with two coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of appropriate primer of approved brand, making three coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete., for finished item of work as per SS 911 for Internal walls (APSS No: 912)

Painting to MS steel sheets for door with new work with Anti corrosive bitumen paint grade 1 Indocem or equivalent on red oxide paint single coat over a primary coat including cost and conveyance of all materials and labour charges etc. complete. Provision for Leach Pits ( RCC rings of 1mt dia )

Painting to MS steel sheets for door with new work with Anti corrosive bitumen paint grade 1 Indocem or equivalent on red oxide paint single coat over a primary coat including cost and conveyance of all materials and labour charges etc. complete. Provision for 1000mm Cover Slabs 750 for contractors proft

Labour Charges for fixing of 1200mm dia RCC Well Rings and cover plates for Septic tanks etc., completye Including CP

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approve MAT-01331

Toilets: - Toilets are provided as per plan with a provision for fixing the wash basin, W.C. etc only is made with M.S. steel section secured to the walls with toilet bracket provision excluding cost of WC/ Wash basin etc

Providing & Placing on Terrace(at all floor levels)polyethylene water storage tank with Double layer approvedbrand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tank

110 mm dia 3 MDouble Socket PVC/SWR pipe - 4 Kg/sq.cm Prince/Sudhakar or any ISI brand MAT-01903 BMW-G.16 ( 3 meters length ) labour charges extra complete for toilet connection

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

110 mm dia PVC TEE

110 mm dia PVC L Bend

110 mm dia PVC Ball Vall

Supply and fixing of 12.7 mm N.P bip tap indian make three heavy duty including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work MAT-01813

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) Toilet Connections- for existing water supply connection

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) Toilet Connections- 28.60 mm ODPipe -SDR 13.50

Labour charges for laying, joining, welding, fixing and commissioning the PPR pipes including all specials such as couplers/ bends/ tees etc including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with welding the joint as per standard practice - up to 40 mm dia LAB-00315