Tender for Labour work for erection of HT,LT line and transformer erection/replacement work and line maintenance work under all scheme under Naliya Sub Division.

PR No.:-865675 Tender Notice No.:- 734/08

Labour work for erection of HT,LT line and transformer erection/replacement work and line maintenance work under all scheme under Naliya Sub

Item Code Description of work UOM Price Amount

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS ARMS CLAMPS, ANTI-

CLIMBING DEVICES, DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS AND NUMBERING COMPLETE WITH COST OF PAINTS AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 MT./200 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF

EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS, ANTI-CLIMBING DEVICES, INSULATORS

2 9902010001 ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND Number 100 992.02

NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SET AND EARTHING.

ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING EXCAVATION OF PIT AND REFILLING

OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS, ANTI-CLIMBING DEVICES, DANGER

3 9902010003 BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF STEEL POLE, FABRICATED MATERIALS Number 25 1661.76

USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SET ANDEARTHING.

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY CROSSING ON BG/MG/NG LINE FOR

0.400/11/22KV OVERHEAD LINES I.E INCLUDING EXCAVATION OF PIT & REFILLING OF EARTH,

FIXING CROSS ARMS, TOP FITTING CLAMPS, ANTI-CLIMBING DEVICES, DANGER BOARD,

INSULATORS ETC. COMPLETE AND PAINTING OF STEEL POLES, FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG PSC POLES INCLUDING EXCAVATION

OF PITS & REFILLING OF EARTHING, FIXING OF CHANNELS, SUPPORTING ANGLES, CLAMPS, ANTI-

CLIMBING DEVICES, DANGER BOARDS, INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING. (WITHOUT

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO 11 METERS. STEEL POLE INCLUDING

EXCAVATION OF PITS & REFILLING OF EARTH, FIXING OF CHANNELS, SUPPORTING ANGLES,

CLAMPS, ANTI-CLIMBING DEVICES, DANGER BOARDS, INSULATORS ETC. COMPLETE & PAINTING

OF POLES, FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINTS

AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH, HG FUSES OF

METERS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, FIXING OF

CHANNELS, SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING DEVICES, DANGER BOARDS,

INSULATORS, DO FUSES ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING. (WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH, DO FUSES, 9 TO

METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, FIXING OF

CHANNEL, SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING DEVICES, DANGER BOARDS,

INSULATORS, ETC. COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING. (WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB SWITCH, DO FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX. OF 8 METERS 200 KG AND PSC

POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROM STORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES, BRACINGS CROSS ARMS

CLAMPS, ANTI-CLIMBING DEVICES, DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC.

COMPLETE AND PAINTING OF FABRICATED MATERIALS USE ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH, DO FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX. 9 TO 11 METERS STEEL POLES

INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH CARTING OF TRANSFORMERS FROM

10 9902020027 STORE TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES, BRACING, CROSS ARMS, CLAMPS, Number 15 9043.55

ANTI-CLIMBING DEVICES, DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC. COMPLETE

AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND NUMBERING AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTIONS OF GUY SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH AS PER

11 9902040001 STANDARD SPECIFICATION WITH STAY CLAMPS, STAY WIRE, ANCHOR ROD, TURN BUCKLE, EYE Number 100 477.44

BOLT, GUY INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT EXCLUDING CONCRETING.

CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF CEMENT SAND METAL (1:2:4) AND

12 9902090008 WATER ETC. AS PER STANDARD SPECIFICATION. CEMENT SHOULD BE OPC (53 GRADE ) USED FOR 20 7349.21

ERECTION OF COIL TYPE EARTHING INCLUDING COST OF COAL SALT ETC. BUT WITHOUT COST OF

GI WIRE AS PER STANDARD SPECIFICATION (20 KG SALT + 20 KG COAL)

ERECTION OF PLATE TYPE EARTHING INCLUDING COST OF COAL SALT ETC. BUT WITHOUT COST OF

GI WIRE AS PER STANDARD SPECIFICATION (20 KG SALT + 20 KG COAL)

STRINGING OF 30MM2 ACSR / 34MM2, 55MM2 AAAC CONDUCTOR FOR 11 / 22 KV & LT LINES Per Con /

INCLUDING FIXING OF INSULATORS, BINDING JUMPERING ETC. Per KM

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC 2.5 / 4.0 MM2 TWIN CORE CABLE

FROM TERMINAL POLE TO METERING POINT WITH METER EARTHING INCLUDING FIXING OF

METER & COMPLETE WORK AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF

MATERIALS BUT INCLUDING COST OF JUSTI KHILA.

PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITH PVC 4MM2 / 10MM2 FOUR CORE

CABLE FROM TERMINAL POLE TO METERING POINT INCLUDING FIXING OF METER & COMPLETE

WORK AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS BUT INCLUDING

COST OF JUSTI KHILLAS, NUTS & BOLTS.

18 9906000002 PROVIDING GUARDING TO HT LINE ON ROAD / RAIL CROSSING. Meter 100 59.68

19 9906000001 PROVIDING GUARDING TO LT LINE ON ROAD / RAIL CROSSING. Meter 100 59.68

20 9901000002 LT LINE TAPPING - SINGLE PHASE Number 50 43.77

21 9901000003 LT LINE TAPPING - THREE PHASE Number 50 79.57

ERECTION OF SINGLE POLE STRUCTURES WITH DO FUSES, TRANSFORMERS, LIGHTENING

ARRESTOR, DISTRIBUTION BOX. ON 8 METERS 200 KG PSC POLE INCLUDING EXCAVATION OF PITS

AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING OF

22 9902030022 CHANNELS, SUPPORTING ANGLES, BRACINGS CROSS ARMS CLAMPS, ANTI-CLIMBING DEVICES, Number 5 3865.95

DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING OF AB SWITCH, DO FUSES,

TRANSFORMERS, LIGHTENING ARRESTOR, DISTRIBUTION BOX. ON 9 TO 11 METERS RSJ POLE

INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM

23 9902030023 STORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES, BRACINGS CROSS ARMS CLAMPS, Number 5 4522.44

ANTI-CLIMBING DEVICES, DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC. COMPLETE

AND PAINTING OF FABRICATED MATERIALS USED ON THE POLE AND NUMBERING AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF PSC POLES OF 10 MT. / 270 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF

EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS, ANTI-CLIMBING DEVICES, INSULATORS

24 9902020028 ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND Number 16 2320.9

NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SET AND EARTHING.

STRINGING OF 100MM2 ACSR / 100MM2 AAAC CONDUCTOR FOR 11 / 22KV & LT LINES Per Con /

INCLUDING FIXING OF INSULATORS, BINDING, JUMPERING ETC. Per KM

STRINGING OF ABC OF FOLLOWING SIZES INCLUDING FITTING OF ALL ACCESSORIES I.E. SPECIAL

DESIGN SUSPENSIION / TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE INSULATOR &

DIRECTED BY ENGINEER-IN-CHARGE. (I) 3X50MM2 + 16MM2 + 1X35MM2 (II)3X35MM2 + 16MM2

STRINGING OF ABC OF FOLLOWING SIZES INCLUDING FITTING OF ALL ACCESSORIES I.E. SPECIAL

DESIGN SUSPENSIION / TENSION CLAMP. FIXING OF CROSS ARM, LT SHACKLE INSULATOR, ETC.

FOR FIXING OF MESSENGER WIRE COMPLETE, AS REQUIRED & DIRECTED BY ENGINEER-IN-

CHARGE. (I) 1X35MM2 + 1X25MM2

STRINGING OF 11KV ABC OF FOLLOWING SIZES IN RURAL / URBAN AREA INCLUDING FIXING OF

CROSS ARM, SPECIAL DESIGN SUSPENSION / TENSION CLAMP, BINDING TO PIN INSULATOR,

PREPARING SHACKLE POINT JUMPERS ETC. AS REQUIRED AND DIRECTED BY ENGINEER-IN-

CHARGE. (I) 3X95MM2 + 1X80MM2 (II)3X70MM2 + 1X70MM2

STRINGING OF ABC OF FOLLOWING SIZE INCLUDING FITTING OF ALL ACCESSORIES. (I) 2C X 50 + 1C

ERECTION OF SINGLE POLE SHACKLE POINT ON PSC POLE 8 MT. / 200 KG. (ERECTION OF PSC POLES

OF 8 MT. / 200 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OF CROSS

30 9918000005 ARMS, TOP FITTING CLAMPS, ANTI-CLIMBING DEVICES, INSULATORS ETC. COMPLETE AND Number 5 1072.93

PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING)

31 9908000001 Replacement of V-X-Arm with transportation,etc (+) Painting. Set 20 208.22

32 9908000001 Fixing of V-X-Arm with Top / LT - X- Arm / Tapping Angle on existing nacked pole with colour Set 15 163.39

Dismentaling of Old deteriorated / Broken / re-usable PSC Pole with all Fabrication - with crediting

fabrication at field store and staking of pole safely on road side.

Dismentaling Of Old Deteriorated / Broken / Re-Usable M.S.Girder Pole / Rail Pole / Tubular Pole

34 9907000005 With All Fabrication - With Crediting Fabrication At Field Store And Staking Of Pole Safely On Road Number 10 904.22

35 9927000042 Dismentaling of Old deteriorated / Broken D.P. Structure set of PSC Poles Set 28 1368.4

36 9927000043 Dismentaling Of Old Deteriorated / Broken / Re-Usable D.P. Structure Set Of M.S.Girder Poles Set 35 2005.92

Replacement Of 11 Kv Pin Insulator With Providing New Double Pin Bindings. (old pin rod should

be credited to field store)

Replacement Of Old 11 Kv Pin Insulator By New 22 Kv Pin Insulator With Rod And Providing Double

Pin Bindings And Check Nuts Etc.

39 9908000121 Replacement of old 11 KV Disc Insulator by New one with binding etc. Number 10 144.56

40 9927000001 Providing 11 KV double disc insulator with binding etc. Number 10 140.99

Replacement of old jumpers and providing new D - type jumper on both side with 8" binding and

Replacement of existing ACSR. / all alu. Conductor up to 55 mm2 by new one / coated conductor Per Con /

with double pin binding including transportation and crediting to store etc. Per KM

Replacement of existing 11 KV conductor by 0.1 A.C.S.R. / AAAC DOG conductor with new double Per Con /

pin binding. Per KM

Re-stringing of 11 KV A.C.S.R. /AAAC Conductor & L.T. Line conductor / Coated conductor (All size) Per Wire /

with new double pin binding between two location. Span

45 9903000009 Re-stringing of 11 KV Aerial Bunch Cable (All size) between two location. Per Span 10 282.49

46 9927000053 Removal / Dismentaling Of Ex. Ht / Lt Line Conductor (All Size) 10 1068.51

47 9911000002 Straightning of tilted PSC Poles / Girder Poles. Number 10 250.91

48 9911000009 Trimming / Cutting of tree branches of obstructing HT / LT Line on one tree. Number 50 51.38

49 9908000018 Providing 11 KV projection brackets in place of old V-X- Arm Set 10 456.62

50 9908000014 Providing LT projection brackets in place of old L.T. X-Arm etc. Set 10 456.62

51 9927000007 Straghtning of tilted D.P. Set ( PSC / Gurder pole) etc with refilling of stones, morum etc. Set 10 714.49

Providing name of 11 KV fdr in "Gujarati" only on PSC / Girder Poles with providing back ground

52 9927000008 colour on poles with two coats of colour and size of letters to be 2 to 3" in approved ISI colour Number 150 36.47

(Asian Apeolite, Three Mengo including all materials).

Providing Pole No with S/S code No, S/Dn Code No. / Fdrs Code No. / T.C. Code No. etc. with back

53 9927000009 ground colour and hight of letters to be 2 to 3" I.S.I. approved colour (A.A. 3 Mengo ) including all Number 150 36.47

Providing New 11 KV A.B. / G.O. Switch with fabrications and insulated colour code jumpers /

bindings lug etc.

55 9917000003 HT ABC Dismantling. (1) 3x95mm2 + 1x80mm2, (2) 3x70mm2 + 1x70mm2 Meter 80 17.92

56 9917000003 Untie the kintting of the old AB Cable Meter 80 17.92

57 9927000022 Providing spacer between L.T. Line condutor with binding etc. Number 10 31.06

Dismentling of existing distribution transformer center up to 100 KVA with all fabrication and

crediting the old material in sub-Division / Division store (With Transformer) - PSC Pole

Dismentling of existing distribution transformer center up to 100 KVA with all fabrication and

crediting the old material in sub-Division / Division store (With Transformer) - Girder Pole

Dismentling of existing distribution transformer center above 100 KVA with all fabrication and

60 9907000017 crediting the old material including Distribution Transformer in sub-Division / Division store. - PSC Set 10 4011.84

Dismentling of existing distribution transformer center above 100 KVA with all fabrication and

61 9907000018 crediting the old material including Distribution Transformer in sub-Division / Division store. - Set 10 4558.91

Dismantling of Transformer Centre (8 Mtr PSC Pole) (without Transformer) with crediting of

fabrication at store & stacking of pole safely on road side or Crediting to Departmental Store

Excavation of trench 0.5 metre wide and 1 metre deep for laying of HT / LT underground cable of

size up to 300mm2 PILC or XLPE. (The cable should be laid on bed of sand and to cover cable with

63 9931000001 half round RCC pipe 6" internal dia. And length of 1 metre along with each bottom and top.) The Meter 10 123.34

entire trench thereafter should be refilled with earth duly rammed up to ground level as per

drawing No. PGVCL/Tech/UG Cable/01/2014-15. (Pro-rata charges may be given for extra digging.)

Excavation of trench 0.75 metre wide and 1 metre deep for laying of double HT / LT underground

cable of size up to 300mm2 PILC or XLPE. (The cable should be laid on bed of sand and to cover

cable with half round RCC pipe 6" internal dia. And length of 1 metre along with each bottom and

top.) The entire trench thereafter should be refilled with earth duly rammed up to ground level as

per drawing No. PGVCL/Tech/UG Cable/02/2014-15.

(Pro-rata charges may be given for extra digging.)

Laying / re-laying of cable in cable trench and from ground level to Pole structure for providing

outdoor cable joints.

LAYING / RE-LAYING XLPE / PILC CABLE BY DIGGING OF PITS, REMOVAL OF OLD CABLE AND

LAYING OF NEW CABLE ON SAND BED AS PER ITEM NO.

WIDENING & REFILLING WITH EARTH DULY RAMMED THE TRENCH FOR LAYING ADDITIONAL NO.

OF CABLE. FOR ITEM NO.

ADD : CHARGES FOR DIGGING OF TAR ROAD FOR LAYING OF CABLES OVER AND ABOVE DIGGING

OF PIT IN NORMAL SOIL AS PER SR.NO.

Laying of underground 11 KV XLPE Cable by push and pool method (Manual) through with HDPE

Pipe 140mm diametre, 6mm thickness or 6" or 4" diametre GI Pipe without damaging surface of

the rod by Horizontal boring / drilling method (excluding cost of HDPE Pipe or 6" or 4" GI Pipe) as

per drawing and specification. (Videography of work should be submitted with bill)

Laying of underground 11 KV XLPE Cable by push and pool method (by Horizontal directional

machine) through with HDPE Pipe 140mm diametre, 6mm thickness or 6" or 4" diametre GI Pipe

without damaging surface of the rod by Horizontal boring / drilling method (excluding cost of HDPE

Pipe or 6" or 4" GI Pipe) as per drawing and specification.

71 9931000009 Moulding of cable joints (straight joints, indoor and outdoor) for PILC Cable - labour charges. Number 10 1015.94

Moulding of cable joints (straight joints, indoor and outdoor) for XLPE Cable - labour charges, for

73 9931000012 Moulding of cable joints (straight joints, indoor and outdoor) for LT PVC Cable Number 20 896.1

Supply of HDPE pipe for laying 11 KV XLPE Cable 140mm diametre and 6mm thickness as per IS: Running

Supply of HDPE pipe for laying 11 KV XLPE Cable 100mm diametre and 6mm thickness as per IS: Running

76 9931000015 Supply of half round RCC Hume pipe 6" internal diametre and length of 1 metre Number 20 138.6

77 9931000016 Supply of mediam grade GI Pipe of size 6" diametre (including clamping the cable with Pole) 11 1848.36

78 9931000017 Supply of mediam grade GI Pipe of size 4" diametre (including clamping the cable with Pole) 10 1323.84

Supply of RCC Hume Pipe of 6" internal diametre for laying cable for double circuit and road Running

crossing. Meter

Supply of sand 0.300 X 0.500 X 1.00 metre (layer at bottom of cable trench approx. 0.15 CMT) as Running

per Drg.No.PGVCL/Tech/UG Cable/01/2014-15 Meter

Supply of sand 0.300 X 0.750 X 1.00 metre (layer at bottom of cable trench approx. 0.225 CMT) as Running

per Drg.No.PGVCL/Tech/UG Cable/02/2014-15 Meter

Rate of Route Marker - Providing, supplying & fixing route marker of C.C. 1:2:4, 150mm X 150mm X

750mm concrete stone (PGVCL marked with approved yellow colour) embeded in earth atleast

82 9931000021 300mm below the ground level and 450mm above ground level at distance approximately 100 Number 5 185.19

metre or as directed by Engineer-In-Charge (this includes material and labour charges for

excavation and refilling.)

Dismantling of Under Ground Cable (Excavation and Refilling Earth and credited to store without

cutting the cable.)

Providing & fixing Heat Shrinkable type Cable Jointing kit suitable for 11 KV 1C x 95 sqmm AB Cable

for Outdoor Termination application.

85 9902050007 PROVIDING & FIXING OF DEAD END CLAMP Number 23 135

86 9902050008 PROVIDING & FIXING OF SUSPENSION CLAMP Number 22 150

87 9902050010 PROVIDING & FIXING OF EYE HOOK Number 23 200

88 9930000031 PROVIDING & FIXING OF 11 KV INDOOR CABLE BOX 185 SQMM - HEAT SHRINK Number 10 5259.87

89 9930000032 PROVIDING & FIXING OF 11 KV OUTDOOR CABLE BOX 185 SQMM - HEAT SHRINK Number 10 6009.87

90 9930000033 PROVIDING & FIXING OF 11 KV STRAIGHT THROUGH JOINT 185 SQMM - HEAT SHRINK Number 10 9899.87

REPLACEMENT OF FAILED DIST XMER 25/63/100 KVA INCLUDING TRANSPORTATION & CREDIT OF

FAILED XMER AT DIV STORE. (0 KM TO 25 TO & FRO. KM)

REPLACEMENT OF FAILED DIST XMER 25/63/100 KVA INCLUDING TRANSPORTATION & CREDIT OF

FAILED XMER AT DIV STORE. (26 KM TO 50 TO & FRO. KM)

REPLACEMENT OF FAILED DIST XMER 25/63/100 KVA INCLUDING TRANSPORTATION & CREDIT OF

FAILED XMER AT DIV STORE. (51 KM TO 75 TO & FRO. KM)

REPLACEMENT OF FAILED DIST XMER 25/63/100 KVA INCLUDING TRANSPORTATION & CREDIT OF

FAILED XMER AT DIV STORE. (76 KM TO 100 TO & FRO. KM)

REPLACEMENT OF FAILED DIST XMER 25/63/100 KVA INCLUDING TRANSPORTATION & CREDIT OF

FAILED XMER AT DIV STORE. (101 KM TO 150 TO & FRO. KM)

REPLACEMENT OF FAILED DIST XMER 25/63/100 KVA INCLUDING TRANSPORTATION & CREDIT OF

FAILED XMER AT DIV STORE. (151 KM TO 200 TO & FRO. KM)

REPLACEMENT OF FAILED DIST XMER 25/63/100 KVA INCLUDING TRANSPORTATION & CREDIT OF

FAILED XMER AT DIV STORE. (ABOVE 200 TO & FRO. KM)

98 9903000010 STRINGING OG MVCC RABBIT CONDUCTOR CKM 1 32596

Total Amount of Tender

Total Amount of Tender

1. Above Quantity aproximately but work to be executed as per actual requirement and measurement recorded accordingly.

2. Above rates Exclusive G.S.T.

3. If work carried out under any special scheme then rules, terms and condition of that scheme must be follow by bidder.

4. Work to be carried out as per site situation & instruction of Engineer In charge.

Digitally signed by

5. All general terms and conditions of PGVCL will be applicable to bidder. CHAUDHARI CHAUDHARI

6. Conditional quotation / rates will not accepted and liable to reject tender.

RAMESHKUMA RAMESHKUMARGANESHBHAI

7. Work Should be carried out as per SOR description, tender Specification & Drawing.

R GANESHBHAI +05'30'

EXECUTIVE ENGINEER

PGVCL, Nakhatrana D.O.

I / We am / are ready to accept the work and for that I read company’s rules and I follow them. I / We have carefully read the entire

tender and which I/We have thoroughly understood and to which I/We agree rate and I/We am/are ready to work with that rate________%

(In words________________________________________________________) below / above company’s rates with satisfactory.

I / We have by agree to keep this offer open for 120 days after the returnable date of the tenderes and shall be bound by

communication of acceptance dispatched within the prescribed time.

Contractor’s / Firm’s Name ___________________________________________ Contractor’s Signature

Contractor’s / Firm’s Address