PROVN OF RAI WATER HARVESTING SYSTEM AND SPECIAL REPAIR TO ENTERANCE GATE WALL AND FENCING AT MIL STATION BHUJ UNDER AGE BR 1 OF GE ARMY BHUJ

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M & L for Pre-cast cement concrete block masonry Type C1 (1;3:6) 20 mm graded aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 as in wall of drain complete all as specified and as directed.

M&L for cement concrete Type C-1 1:2:4 (20mm graded agg) as in coping, bed block and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in 1:4 finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of surface and applying three coats of white wash to newly plaster surface complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and as directed.

Filling under floor with excavated soil as required from item No 1 above and spreading and levelling in layers including watering and well ramming complete all as specified and as directed.

Removal of excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.

M & L for Reinforced concrete pipes 600mm dia class NP2, laid and jointed complete with collars complete all as specified and as directed.

M & L Cement concrete 100 mm thick in subfloor type C- 2, 1:3:6 (using 40mm graded aggregate) complete all as specified and directed.

M & L Cement concrete 150 mm thick in floor/subfloor type B-1, 1:2:4 (using 20mm graded aggregate) complete all as specified and directed.

M & L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed exc 10 cm in width and set and jointed in C M 1:6 complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregates) as in coping to drain walls including necessary formwork etc; complete all as specified and as directed.

M & L for rendering 10mm thick on fair face of block masonary in CM 1:4 and finishing even and smooth without using extra cement complete all as specified and directed.

M & L plain cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) for surface channel including weathering slightly rounded or chamfered including formwork complete all as specified and directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete , using extra cement, including forming moulds, mitered/stopped ends etc complete all as specified and as directed.

Removal of excavated surplus material soil/spoil to a distance exc 50 m n.exc 150 m including debries lying at site and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site complete all as specified and as directed.

M & L plain cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) for surface channel including weathering slightly rounded or chamfered including formwork complete all as specified and directed.

M & L in repair Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds ends etc; material and labour complete all as specified and as directed.

Demolition by breaking up drain pipes salt glazed stone ware pipe, AC, reinforced concrete etc; any type of 150mm internal dia of pipe and jointed in cement mortar and taking out of root trenches removing the debries from site, complete all as specified and directed.

M & L for reinforced concrete pipes, 150mm bore, class NP-2, laid in trenches and jointed in cement mortar as specified complete with collars, complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 for 150mm dia pipe bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in, complete all as specified and as directed.

Taking down cement plaster, any description, on brick or stone/block walls etc; including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris, complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep & getting out in soft/loose soil.

M & L for Excavation in over areas nt exc 1.5mt depth and getting out any type of soil complete all as specified and directed.

M & L Excavation in over areas exc 1.5mt and nexc 3.0 m depth and getting out SDR complete all as specified and directed.

M & L Excavation in over areas exc 3mt and nexc 4.5 m depth and getting out SDR complete all as specified and directed.

M & L Excavation in over areas exc 4.5mt and nexc 6 m depth and getting out SDR complete all as specified and directed.

M & L PCC (1:3:6)type C2(using 40 mm grade aggregate) in foundation filling and mass concrete complete all as specified and directed

M&L Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM(1:6) complete all as specified and as directed.

M&L for loose filling broken brick Ballast of gauge 40 to 80 mm complete all as specified and as directed.

M & L for RCC-M-30(Design Mix) using 20mm graded aggregate for Beam complete all as specified and directed.

M & L RCC- M-30 (Design Mix) using 20mm graded aggregate For rafts as Mass Concrete

M & L RCC- M-30 (Design Mix) using 20mm graded aggregate for walls.

M & L Form work for fair finished surfaces of concrete measured for slab.

M & L Form work for fair finished surfaces of concrete measured flat for wall

M&L for rendering 15mm thick on fair face of block masonary in CM 1:3 and finishing even and smooth without using extra cement complete all as specified and directed.

Supply only Integral waterproofing compound

M&L for framed work such as grills, gratings,etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guardbars, barred iron doors, ladders, framed balusters, walkways, railings ,framework of watertanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M & L for 75mm thick Plinth protection PCC (1:3:6) using 20mm graded stone aggregate complete all as specified and as directed.

M & L broken stone/boulder hard core of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and ramed to a true surface complete all as specified and as directed.

M & L for use & waste for Form work for rough finished surfaces of concrete measured flat for Beam complete all as specified and directed.

M & L for Reinforcement Steel(TMT bars)Fe 500d TMT bars 10mm dia & over of Grade Fe 500d complete all as specified and as directed.

M & L for Reinforcement Steel(TMT bars)Fe 500d 5 to 10mm dia in stirrups, spacers & binder etc; complete all as specified and as directed.

M & L for RCC-M-30(Design Mix) using 20mm graded aggregate for slab complete all as specified and directed

M & L for Form work for fair finished surfaces of concrete measured flat for slab complete all as specified and as directed.

Providing reinforced cement concrete type B-l, 1:2:4 (using 20 mm graded aggregate) in precast Slab complete all as specified and as directed. (Reinforcement will be paid seperately)

S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc ( tee, angle, channel, flat or MS hollow square/ rectangular any type, size/ sections), including distance pieces, cleats etc conforming to FE- 290 (Gde-E- 165), including fabrication, erraction and fixing complete all as specified and directed.

M&L for Reinforced concrete pipes Class NP2 of size 450mm laid and jointed complete with collars complete all as specified and as directed.

M&L Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth, for foundation, etc. For gate Pillars , Boundaty Walls. In any Type of soil complete all as specified and as directed.

M&L RCC Type TypeB0 1:2:4 (using 12.5 mm graded aggregates) in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc; basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

M & L for RCC Type TypeB0 1:2:4 (using 12.5 mm graded aggregates) in columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar works; vertical or to batter for rough finished surfaces complete all as specified and as directed.

M&L Form work to sides of pillers, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and as directed.

M & L for Framed work using mild steel having grade of GDE Fe- 410W (Gde E-250) Quality A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for ornamental pattern framed work such as grills, gratings,etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guardbars, barred iron doors, ladders, framed balusters, walkways, railings ,framework of watertanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S & F of mild steel works posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or reveting, etc., & similar work conforming to Fe 290 or E-165 complete all as specified and directed.

S & F of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins complete all as specified and as directed.

M & L for preparing new steel surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M & L for Providing precast cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) solid building blocks or slabs exc 10cm width (with plain or interlocking joints as directed) setting in Cement Mortar 1:6 in walls complete complete all as specified and directed.

M & L JET BLACK Granite slab work 18 to 20mm thick in vertical surface of cooking platforms dados on walls and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over & including backing coat 10mm thick in CM 1:4 including provn of araldite and grit on plastered surface for making the surface of the slab rough finish) complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded aggregate) as in Beams, Cantilevers, bressummers, lintels, copings etc Over 1.5 m span complete all as specified and as directed.

M&L for rough finished formwork to sides and soffits of floor or roof beams,beam haunchings, girders, bressummers, lintels,cantilevers, shelves including supports,overhangs,etc..also splays between floors and beams,etc complete all as specified and as directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004,Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section,Including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

NIRMAAN CONSTRUCTION (BID ID -3408433)

sudarshan builders (BID ID -3414929)

SAPPERS CONSTRUCTION (BID ID -3415602)

Gayatri Construction Co (BID ID -3408324)