SPECIAL REPAIR TO TOILETS OF AIRMEN BILLETS AT AF STN BHUJ

Amount

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water complete all as specified and directed by Engineer-in-Charge.

Demolition of precast concrete block walling built in cement morter complete all as specified and directed by Engineer-in-Charge.

Material & labour for cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in bed blocks for fixing of hold fasts and the like including weathering, slightly rounded or chamfered angles and throatingetc complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering 15mm thick in CM 1:4 mixed with water proofing compound on PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. (Note : Supply only WPC will be measured and paid separately) .

Supply only water proofing compound (liquid), ISI marked complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering 10mm thick in CM 1:3 on concrete surfacves/ chajja/ ceiling, etc finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Supply & fix GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, fixing with galvanised steel staples, MS flat, nuts and bolt fixed to walls, steel members incl cutting and waste complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation new plastered or unplastered old decorated surfaces of wall and applying two coat of exterior emulsion paint over a coat of water base primer complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of scapped surfaces of walls of any description by washing, rubbing down and applying 3mm one coat of wall care putty complete all as specified and directed by Engineer-in-Charge.

Material & labour for prepration of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Material & labour for prepration of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge

Complete removal of existing treatment on wall surfaces and applying two coats of exterior emulsion paint complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment on wall surfaces and applying two coats of white wash complete all as specified and directed by Engineer in Charge.

Complete removal of existing treatment on ceiling surfaces and applying two coats of white wash complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) and removing to or from store complete all as specified and directed by Engineer-in-Charge.

aking down chowkats or frames exc 1.5 sqm and n exc 4 sqm each with shutters (without taking off shutter from the frame) and removing to or from store complete all as specified and directed by Engineer-in-Charge.

Material & labour for aluminium window powder coated (minimum thickness of powder coating 50 micron) with double side hung shutter for glazing and gauging and frame with one or more rebates anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle, and anodised aluminum fittings such as stay, hinges, glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) complete all as specified and directed by Engineer-in-Charge.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately. (ii) Main Section of aluminium shall be used 100mmx45mm with same thickness as mentioned in lieu of Drg 65mmx38mm above reffered due to less space available for fixing wire gauge shutter fixing grill.

Supply & fix anodized aluminium ventilator top hung/Sliding type with one or more rebates powder coated (minimum thickness of powder coating 50 micron) fixed type/ with frames aluminium section size 63X38X1.20mm thick including fly proofing ventilator fixing with standard rubber gasket locking arrangements aluminium beadings & joining cleats, suitable butt hinges, handle and tower bolts for fixing complete all as specified and 5.5 mm thick tinted glass with Solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed by Engineer-in-Charge. Note- (i) Quoted rate shall deemed to be included for supply of aluminium sections, fabricate & fixing in position of window frames & shutters, locking arrangements complete all as specified and directed by Engr-in-Charge. (ii) Aluminium grill fixed under above item shall be measured and paid separately .

Supply only aluminium anodised powder coated grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm complete all as specified and directed by Engineer-in-Charge.

Supply and fix rubber beading for fixing of glass of item No 21 here-in above complete all as specified and directed by Engineer-in-Charge

Supply and fix PVC door PDS-01 comprising of shutter and all as shown on drg No.CEAA/TD/149 sheet No. 1/1 (PVC RIGIDE FOAM) , door frame/ chowkhats of solid rigid foam profile FP-6030 and shutter of solid PVC foam profile FP 7114 with 4 mm thick high pressure compact laminate as infill (Panel) including all necessary hardware fittings/Mild steel iron / aluminum mongre complete all as specified and directed by Engineer-in-Charge.

Providing & fixiing solid PVC single door frame of size 105 mm x 60 mm with a wall thickness of 5 mm, made by jointing 3 Nos, hear bent PVC sheet 'C' channel of 5 mm foam sheet of sizes 35mm x 30mm x 25mm and 40mm x 35 mm x 40mm & 25 mm x 30mm x 35mm using solvent cement. The two side 'C' channel shall be reinforced with 19mm x 19mm MS square tusbe of 19mm gauge. All the three 'C' channel shall be fixed to flat baseof 5 mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and jointed by inserting 4 Nos. 150mm long brackets of 15 mm x 15mm MS square tube inside the 19mm x 19mm square tubes. The door frame shall be fixed to the wall using 65/100 mm long MS screws throguh the frame by using PVC fasteners. A minimum of 8 Nos of screws to be provide for each vertical member & minimum 4 nos for horizontal member etc complete all as specified and directed by Engineer-in-Charge.

Providing and fixing 35mm thick factory made moulded door shutter consisting of solid core single leaf flush door of 30mm thichness, lipped with 15mm (5mm x 30 thick x 30mm width on one stiles and top reails & bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2 raised panel design in different plain and 2mm plain coloured PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih stainless steel wire staples as in wiremesh shutter complete all as specified and directed by Engineer-in-Charge.

Supply & fix mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-Charge.

Supply & fix 75 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.

Supply & fix aluminium handles, cast type, anodized 150 mm size comp ISI Marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long complete all as specified and directed by Engineer-in-Charge.

Supply & fix 150 mm size (overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Material & labour for 450x350 x7 mm thick coloured glazed ceramic tiles (digital pattern) including highlighter colored as in dado/ skirting and vertical surfaces set & jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed by Engineer-in-Charge.

Material & labour for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 15 mm thick screed bed (1:4) etc complete all as specified and directed by Engineer-in-Charge.

Dismantling stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for granite stone slabs 18-20mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing and incl 15mm thick screed bed CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (reinforced), roofs, beams, landing, and similar suspended work of any description and in any position complete all as specified and directed by Engineer-in-Charge.

Material & labour for RCC type B0, 1:2:4 (using 12.50 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopiies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.

Material & labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilvers, shelves inclding supports, overhangs,etc also splays between floors and beams, etc for rough finished flat surfaces of concrete complete all as specified and directed by Engineer-in-Charge.

Supply & fix MS deformed or twisted bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

Supply & fix anodised aluminium snap grid size of grid 605mm x605mm frame work made out of 0.5mm thick GI tee 32x24mm for main, 25x44mm for cross tee and 20x20mm angle fixed on wall , powder coated finish on exposed faces of tee and angle , hung from ceiling using 2mm thick GI suspension wires spaced of 1200mm on main runners for false ceiling complete all as specified and directed by Engineer-in-Charge..

Material & labour for gypsum ceiling board for ceiling prepainted , matt finish, 600x600x12x15mm in size with preparation of approved brand/ make, laid over, grid work ro fixed with nails to any type of frame work or with staples on snap grid incl making niches for fan/light on ceiling purposes complete all as specified and directed by Engineer-in-Charge

Taking up or down following size of steel tubing and connections including removal to store for reuse or credit to contractor complete all as specified and directed by Engineer-in-Charge Note : (a) The rates apply to pipes above or below ground only in repairs and alterations. (b) 'The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing,where required.

15mm bore of pipe

20mm bore of pipe

25mm bore of pipe

50mm bore of pipe

Supply & fix CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge for the following sizes: (SDR-13.5)

15mm bore of pipe

20mm bore of pipe

25mm bore of pipe

50mm bore of pipe

Supply & fix in repairs CPVC ISI marked, IS-15778 Globe or gate valves / Ball valves, with iron wheel head, screwed both ends for CPVC pipe and fixed complete all as specified and directed by Engineer-in-Charge for the following sizes:-

15mm bore of pipe

20mm bore of pipe

25mm bore of pipe

50mm bore of pipe

Dismantling of cast iron/PVC /AC or reinforced concrete pipes of any size jointed in cement mortar/solvent cement etc. and taking out of from trenches/walls, (including all fittings), with spigot and socket ends and lead joints including burning out joints if required complete all as specified and directed by Engineer-in-Charge for the following sizes:-

100/110mm bore

75mm bore

40mm bore

Supply & fix PVC (SWR) single socketed in any length with rubber ring joints sealed with approved adhesive and fixed on wall with MS clamps/brackets or in floor complete all as specified and directed by Engineer-in-Charge.

110mm bore

75mm bore

40mm bore

Supply & fix PVC junction single 'Tee' equal provided with access door / with door opening, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge for the following sizes:-.

110mm bore

75mm bore

Supply & fix PVC bend equal of any radius provided with access door, ISI marked, IS-14735, jointed with solvent cement for 75mm size pipes complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC bend equal of any radius provided with access door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes complete all as specified and directed by Engineer-in-Charge

Supply & fix PVC (SWR) bends any radius of 110 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm bore with access door complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 75 mm bore with access door complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC socket reducer 110mmx75mm size, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC cowl for 75mm size pipes, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC cowl for 110mm size pipes, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs of PVC gully trap 150x110mm,setting and jointing with solvent cement including dismantling of surrounding concrete and fixing of gully trap with and including cement sand mortar 1:3 complete all as specified and directed by Engineer-in-Charge.

Supply & fix grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed by Engineer-in-Charge.

Supply & fix 75 mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe complete all as specified and directed by Engineer-in-Charge

Supply & fix 110 mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 1000 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 750 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair vitreous china urinals bowl , Half stall type, white colour , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe complete all as specified and directed by Engineer-in-Charge

Supply & fix PTMT urinal spreader for fixing with 15 mm bore pipe complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs for bib taps, fancy type, cast copper alloy with crutch handle, chromium plated, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs angle cock / stop valve fancy type 15 mm dia, cast copper alloy, chromium plated, high pressure with crutch handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC connection 450mm long with check nut for wash hand basin/ flushing cistern etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair shower rose chromium plated with swivel joints of size 150mm cast copper alloy CP, fancy type with CP neck 9" long made to shape complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair PVC flexible waste pipe (heavy duty) 32/40 mm for fixing to WHB/Kitchen sink with long screwed shanks and fly nut flanged complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, white colour, low level with inlet, ball valve, float, Flush pipe of 32 mm dia and handle including brackets incl PVC connection with CP brass nuts on both sides complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.

Supply & fix CP towel rail, 20mm dia, D type,60cm long between flanges complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs vitreous china wash basin light colour oval/flat shape as fitted on slab or flat back size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair water closet white vitreous china ware orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet including provision of PCC bedding type B1, 1:2:4 ( using 20 mm graded stone aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC) complete all as specified and directed by Engineer-in-Charge

Supply & fix in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour, PVC bend pipe complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs jet spray to EWC with PVC nozzle, PVC fish plates and PVC fish plates and PVC flexible pipe etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs for grating square 150mmx150mm size of stainless steel complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair CP Health faucet with 1.5m tube and hook complete all as specified and directed by Engineer-in-Charge.

Demolition of cinder concrete of any description and in any position and removing the rubbish from the work site complete all as specified and directed by Engineer-in-Charge.

Supply & fix preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying epoxy resin coating polymer modified cementitious coating like brush bond of fosroc, pidilite and bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor complete all as specified and directed by Engineer-in-Charge.(IWPC will be paid separately) .

Material & labour for PCC type C2, 1:3:6 (12.50 mm graded aggregate) as in sunken slab filling complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete of any description and in any position and removing the rubbish from the work site. complete all as specified and directed by Engineer-in-Charge.

Taking down existing water proofing tretment on RCC slab / beams with bitumen felt with out damaging structure and removing the debrise outside the MD land and M&L for plaster 10 mm thck on concrete surfaces in cement mortar 1:3 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to recive WPT treatment , applying a coat of bitumenm primer confirm to IS - 3384-1986 @ 3% per sqm . providing APP modified memrane with non woven polyster reinforcement/mat ( centre core) by tourch application over primed surfaces complete all as specified and directed by Engineer-in-Charge.

Material & labour for cement concete type B-1,1:2:4 mix (using 20 mm grade aggregate) as in Roof Padding etc finished surface even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material & labour for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster and decayed concrete if any upto double storey construction from roof projection, chajja, concrete surface of any description incl all scaffolding arrangements and making good the decayed portion with CM 1:3 or with PCC 1:2:4 using form work if any and finally finishing the surface with 10mm thick cement plaster 1:3 to match the existing surface complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs hand health faucet spray to EWC with PVC nozzle, and PVC flexible pipe etc complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs chromium plated toilet paper holder complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs PVC corners fixed in bath rooms with screws including necessary drilling holes complete all as specified and directed by Engineer-in-Charge.

Supply & fix MS peg set of six power coated as approved by GE complete all as specified and directed by Engineer-in-Charge.

Removing demolised building materials/ debris etc to a distance of 2 KM or under incl loading unloading and stacking at the destination complete all as specified and directed by Engineer-in-Charge.

Pulling down the existing U/S wires of any type from concealed wiring carefully of aluminium/copper point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete all as specified and directed by Engineer-in-Charge.

Pulling out sub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut complete all as specified and directed by Engineer-in-Charge.

Material & labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING INCLUDING accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with PVC surface box complete all as specified and directed by Engineer-in-Charge for :-

One light point controlled by one, one way switch single pole piano type.

One Fan point controlled by one, one way switch single pole piano type.

One 3 pin 5 Amp socket outlet on the same board.

One 3 pin 5 Amps socket out let on independent board.

All as per item No.101 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board complete all as specified and directed by Engineer-in-Charge.

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through and including PVC casing caping ISI marked with accessories and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engr-in-Charge.(Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

Supply & fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 20 W light source including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative (white) with 2 Core copper wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 18/20 W 4 ft indoor decorative (white) with 2 Core copper wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of LED lamp, 7 W type of cap B22 wide operating range 140 V-280 V input current 08mA-30mA, lumen 180-300, UV and IR free light, color temperature 6500 K cool day light up to 80% energy saving over GLS complete all as specified and directed by Engineer-in-Charge

Supply & fix in replacement double door sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement double door sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032single pole and neutral 12 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement double door sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032single pole and neutral 8 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement double door sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032single pole and neutral 4 ways 415 volts powder coated complete all as specified and as directed by Engineer-in-Charge.

Supply & fix MCBs, in distribution board of the following rating and capacities complete all as specified and as directed by Engineer-in-Charge.

MCB SPN of 240 volts 20/32/40 Amps Capacity, 'C' series 10 KA

MCB SP of 240 volts 5-40 Amps Capacity, 'C' series 10 KA

Supply & fix in replacement of PVC body exhaust fan, AC single phase 230/240 volt of size 250 mm sweep with louvers including making hole of suitable size/alteration to the existing hole to fix the exhaust fan complete all as specified and directed by Engineer-in-Charge. Note:- Old u/s exhaust fan will be deposited in MES store yard)

Supply & fix in replacement of metal body exhaust fan, AC single phase 230/240 volt of size 250 mm sweep with net frame including making hole of suitable size/alteration to the existing hole to fix the exhaust fan complete all as specified and directed by Engineer-in-Charge. Note:- Old u/s exhaust fan will be deposited in MES store yard)

Supply & fix in replacement, switch piano type, 5 Amp. SP, one way complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement socket outlet 3 pin, 5A, flush type complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement switch socket combination, 2 in 1, 5 Amp, flush type complete all as specified and directed by Engineer in Charge.

Supply & fix in replacement switch socket combination 2 in 1, 5/16A 5 in 1 Amp flush type universal complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of ceiling rose 3 phase, PVC/ Polycarbonate body complete all as specified and directed by Engr-in-Charge.

Supply and repair hylum sheet 3mm thick as existed in the switch board making provision for fixing switches and socket complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement metal plug top 20 Amps 3 pin complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing in replacement of water heater storage type 25 Ltr, rated wattage 2000W,230V AC, frequency 50Hz phase single auto cutoff rust proof external body suitable for highrise building suitable for water pressure head upto 8 bars star rating (BEE) 5 complete all as specified and directed by Engineer-in-Charge Note:-Old unserviceable water heater will be deposited in MES store yard.

Supply & fix in replacement metal clad enclosure pole and neutral with a two pin and earth plug and socket complete 240 volt with one single pole MCB of 20 Amps complete all as specified and directed by Engr-in-Charge.

OM SREE MAHADEV TRADERS

Khodiyar Construction

sudarshan builders

SARASWATI CONSTRUCTION