Strengthening of Nagari Gaon Laweshal Water Supply Scheme in Bhimtal, Nainital

Amount

Transportation of suitabe truck monted odex/DTH drilling rig and other T&P ,tripod Diesel driven generator set and related accessories up to site bhawali mini tubewell and back up to destination after completion of work

Drilling of bore 225mm dia with sinking of 200 mm M.S.E.R.W fincut casing plain /perforated pipe by odex from gl to 120mtr bg

flushing and cleaning of tubewell by air compressor

125 mm dia DTH bore

Supply of 200 MM dia MSERW fin cut pipe of 8.0mm thick plain /perforated pipe as per is 1239/4270 with tolerance as per manufacturiner norms in the normal lenght of 3mtr each

(i) 200mm dia mserw plain fincut casing pipe

supply and fixing of suitable casing shoe of EN24 steel asper odex attachment of 200 mm Dia

supply of 200mm dia MS well cap

Dismentling of Ring Machine after completion of work fitting of well-cap

Transportation instalation and lowering of submersible OP Unit with 80 mm dia ms column pipe with accessories up to 80mtr or as per required depth complete with power wiring and dismentling after development with site clearance

development of tubewell by submersible op unit of 300lpm 100-110mtr head to get required sand free discharg 200 lpm by diesel driven generator set including labour diesel lubricant etc

hydrogeologocal survey

Chemical & Bacteriological Test

S/o Submersible pump set of 450 LPM, 143 Mt. head Assembly operating at 3 phase 50Hz AC supply.(1Set Pumps as stand bye) sutaible for 200 mm dia assembly of Tubewell.

Supply of DOL starter cum pannal 20 HP suitable to control above pump-motor set.

Complete power wiring to carry out wiring from main to Pump House control panel to starter and to motors as detailed below: (i) 4mm2 3 core submersible cable-80Mt. (ii) 10 mm2 3.5core Al. Armourd cable-40Mt. (iii) Jointing material- 1Set

Complete double earthing materials such as earth plate, earth strips, coal, salt etc. required as per IE rules

Supply of main piping and valves comprising of following: S/o M.S. column pipe with top pipe in 3mt. Length, complete with interlocking arrangement 80Mt. Delivery Side (i) Cast iron sluice valve 80 mm size of class 1.0 PN -2Nos. (ii) Cast iron swing check valve 80 mm size of class 1.0 PN - 2 Nos. (iii) MSD/F enlarger pump outlet x 80 mm - 2 Nos. (iv) MSA/F Tee size 80 mm x 80 mm x 80 mm - 2 Nos. (v) Blind flange 80 mm size - 1 No. (vi) MSD/F distance piece 80 mm size in 1.5 m length -2 Nos. (vii) MSD/F distance piece 80mm size in 3 m length -2 Nos. (viii) MSD/F pipe 80 mm size in 2.0 m length -1 No. (ix) Nuts, Bolts, Rubber / Fibre packing for jointing above pipes and specials - 1 Set Bye Pass Arrangement (i) 80mm size cast iron gate valve with hand wheel of class 1.0 PN - 2 Nos. (ii) 80mm size cast iron swing check valve of class 1.0 PN - 1 No. (iii) 80 mm x 80 mm x 80 mm MSA/F Tee - 1 No (iv) MSD/F bend 90º x 80 mm - 2Nos.

Presssure Gauge 100 mm dial with control cock and fittings of range 0-7 Kg/cm2 - 2 Nos. Compound cock gauge 100 mm dial with control cock and fittings of range 0- ±1 Kg/cm2 - 2Nos. Complete with all fitting

Supply of following tools required for maintenance of pumping plants. (i) DE spanner set 12 Pieces: 1 Set. (ii) Ring spanner set 12 Pieces: 1 Set. (iii) Screw driver 200/250 mm size : 1 No. (iv) Insulated Plier 200 mm size: 1 No. (v) Hammer 2 Kg: 1 No. (vi) Pipe wrench 300 mm size-1 Nos. (vii) Screw wrench 300 mm size- 1 No. (viii)Chain wrench suitable for 80mm Dia column pipe.-2 Nos (viii) Grease gun - 1 No.

Supply of rubber resistance sheet of size 1m x 2m x 0.025m

S/o 25 KVA fully automatic Servo Control Voltage Stabilizer suitable for regulating incoming voltage 280 to 460 Volt , outgoing voltage 415Volt with change over switch and 3Core copper cable.

32 Amp MCCB

Chain pulley block of 2Tonne capacity 4.5Mt. lift spur gear.

Intelligent GSM based Mini Remote Terminal Units/PLC with analog and digital parameters and features as specified mini T.W. and transmit data on GSM backbone. GSM based wireless Communication system capable to transfer and gather data from remote sites to master Control Stations (Voltage, Current, Power factor, Pumping running Hour etc.) with 6 Amp. Automatic Voltage stabilizer with high and low cut and isolation transformer, including Erection, testing and commissioining and modification of starter with AC and DC relays and necessary wiring complete in all respect.

Installation Testing and Commissioning of Pumping Plants with acessories inside the pump house but without civil works such as laying of foundations, cable trenches etc.

Painting of entire installation with 2 coats of super enamel paint as per direction of Engineer-Incharge of works

Cartage of Pumping Plants and all acessories from store to site of work including head load charges from road site to site of works as required. @5% of Total A (Upto 2Km)

Earth work in excavation in soil mixed with shingle and boulders etc. or in medium / hard shale in foundation trenches including disposal of surplus earth upto initial lead of 30 m. & lift of 1.50 m

Soil mixed with boulders

Medium rock

Filling of earth in plinth including dressing, ramming with excavated earth (90% of floor area)

Concrete with 4 cm. gauge approved stone ballast, coarse sand, cement in proportion of 1:4:8 in foundation and floor including supply of all materials labour T&P etc. required for proper completion of works.

R.C.C. (1:1.5:3) work in columns, beams, slabs, lintels and balcony fair finished excluding steel reinforcement and its bending but including centring and shuttering and binding steel

For Superstructure & Pump Foundation

Column

For Subrstructure

Mild steel reinforcement including bending in R.C.C. work.

Centring and shuttering including strutting, ropping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Foundation,Plinth beam,Foundation (Pumping plant)

Sun shed,Slab,Stair slab to roof

Beam,Lintel

Column,Bracket

Ist class brick (1:6) in superstructure including necessary cutting and making stone as required

S/F of Angle Iron 50 mm x 50 mm x 5 mm chaukhats for doors, windows and ventilators with grill steel shutter hold fast hinges, tower bolts, handles etc.

Providing and fixing MS glazed windows / doors shutters 1 mm thick M.S. sheet with frame of 40 mm x 40 mm x 6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.-Using flats 30 mm x 6 mm for diagonal braces and central cross piece

12 mm thick cement plaster 1:6 (1cement : 6 coarse sand) Inside Outside Of Pump house

Concrete with 2 cm. gauge approved stone ballast, coarse sand, cement in proportion of 4:2:1 including supply of all materials labour T&P etc. required for proper completion of works. Stairs

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate- Floor area Inside And Outer Apron 0.6 m wide

Supplying and fixing of glass strips of 40 mm x 4 mm size in cement concrete flooring

Supply of all materials and construct 150 mm S.C. drain along the appron including supply of all labour T&P etc complete (out side + inside of pump house) (0.05 cum - 4.1.8 + 0.03 cum - 4.1.3)

White washing with lime three or more coats on new work.

Dry distemper on internal walls over a coat of primer

Finishing walls with Acrylic Smooth exterior painting two or more coats on new work and .with cement primer one coat

Painting on steel surfaces with paint of approved quality including priming coat.

Supply and fixing of M.S I section for size ISMB 250 mm x 125 mm web 6.9mm and length 5.0 m (Weight @ 37.3 Kg/m)

Supply & fixing of 100 mm dia S.C.I down take pipe including clamping in walls etc.

BOUNDARY WALL- Provision of 1.5 m high Boundary Wall in brick masonry including supply of all materials, labour, T&P etc. complete. At MPS / IPS

Provision of Iron Gate with Pillars of size as required complete

Excavation for foundation

PCC 1:4:8 including supply of all materials, labour, T&P etc. complete

PCC 1:2:4 including supply of all materials, labour, T&P etc. complete

RR Stone Masonry 1:6 including supply of all materials, labour, T&P etc. complete

1. Supply of Electric driven horizontal Multi stage centrifugal clear water pump capable of delivering 250LPM discharge against a total head of 80 m complete with coupling and coupling guards (1Set Pumps as stand bye) 2. Supply of 12.5 HP TEFC Electric Motor 2900 RPM suitable to operate on 415 +/- 10% Volts, 3 Phase, 50 Hz AC supply 3. Supply of MS fabricated heavy duty base plate for mounting above Pump and Motor

1. Supply of Electric driven horizontal Multi stage centrifugal clear water pump capable of delivering 150LPM discharge against a total head of 50 m complete with coupling and coupling guards (1Set Pumps as stand bye) 2. Supply of 5 HP TEFC Electric Motor 2900 RPM suitable to operate on 415 +/- 10% Volts, 3 Phase, 50 Hz AC supply 3. Supply of MS fabricated heavy duty base plate for mounting above Pump and Motor

1. Supply of Electric driven horizontal Multi stage centrifugal clear water pump capable of delivering 70 LPM discharge against a total head of 170 m complete with coupling and coupling guards (1Set Pumps as stand bye) 2. Supply of 7.5 HP TEFC Electric Motor 2900 RPM suitable to operate on 415 +/- 10% Volts, 3 Phase, 50 Hz AC supply 3. Supply of MS fabricated heavy duty base plate for mounting above Pump and Motor

1. Supply of fully Automatic Air cooled Star Delta starter cum panel. upto 12.5 HP Under this Sheet metal fabricated cubical type dust & vermin proof wall mounted type with stand of M.S. angle iron cubical with front door opening. with rubber card lining to prevent dust & moisture dully painted with super enamel gray paint

Complete power wiring to carry out wiring from main to Pump House control panel to starter and to motors as detailed below: 1- 4 SQmm 3 core submersible cable- 80Mt. 2- 10 SQmm 3.5core Copper Armourd cable-20Mt 3- Jointing material- 1Set

Earthing Material- Complete double earthing materials such as earth plate, earth strips, coal, salt etc. required as per IE rules.

Supply of main piping and valves comprising of following: Suction Side - (i) CID/F Sluice Valve of size 80 mm with hand wheel class 1.0 PN - 2 Nos. (ii) MSD/F bend 90º x 80 mm - 4Nos. (iii) MSD/F taper size pump inlet x 80 mm - 2Nos. (iv) MSD/F pipe 80 mm size in 3 m length - 4Nos. Delivery Side - (i) Cast steel sluice valve 80 mm size of class 150 ASA -2Nos. (ii) Cast steel swing check valve 80 mm size of class 150 ASA - 2 Nos. (iii) MSD/F enlarger pump outlet x 80 mm - 2 Nos (iv) MSA /F Tee size 80 mm x 80 mm x 80 mm - 2 Nos. (v) Blind flange 80 mm size - 1 No. (vi) MSD/F distance piece 80 mm size in 1.5 m length -2 Nos. (vii) MSD/F distance piece 80mm size in 3 m length -2 Nos. (viii) MSD/F pipe 80 mm size in 2.0 m length -1 No (ix) Nuts, Bolts, Rubber / Fibre packing for jointing above pipes and specials - 1 Set Bye Pass Arrangement- (i) 80mm size cast steel gate valve with hand wheel of class 150ASA - 2 Nos. (ii) 80mm size cast steel swing check valve of class 150 ASA - 1 No. (iii) 80 mm x 80 mm x 80 mm MSA/F Tee - 1 No. (iv) MSD/F bend 90º x 80 mm - 2Nos.

Gauges- (i) Presssure Gauge 100 mm dial with control cock and fittings of range 0-70 Kg/cm2 - 2 Nos. (ii) Compound cock gauge 100 mm dial with control cock and fittings of range 0- ±1 Kg/cm2 - 2Nos. (iii) Complete with all fitting

Supply of rubber resistance sheet of size 1m x 2m x 0.025m

S/o 40 KVA fully automatic Servo Control Voltage Stabilizer suitable for regulating incoming voltage 330 to 460Volt , outgoing voltage 415Volt with change over switch and 3Core copper cable

32 Amp MCCB

Level Transmitter (0-5 Mtr. Sensing Range)

Intelligent GSM based Mini Remote Terminal Units/PLC with analog and digital parameters and features as specified mini T.W. and transmit data on GSM backbone. GSM based wireless Communication system capable to transfer and gather data from remote sites to master Control Stations (Voltage, Current, Power factor, Pumping running Hour etc.) with 6 Amp. Automatic Voltage stabilizer with high and low cut and isolation transformer, including Erection, testing and commissioining and modification of starter with AC and DC relays and necessary wiring complete in all respect.

Installation, Testing and Commissioning of Pumping Plants with acessories inside the pump house but without civil works such as laying of foundations, cable trenches etc.

Painting of entire installation with 2 coats of super enamel paint as per direction of Engineer-Incharge of works.

Intenal and external electrification of all pump house, staff quarters and campus.

Cartage of Pumping Plants and all acessories from store to site of work including head load charges from road site to site of works as required. @5% of Total A (Upto 2Km)

1- Supply of Electric driven horizontal Multi stage centrifugal clear water pump capable of delivering 300LPM discharge against a total head of 270 m complete with coupling and coupling guards (1Set Pumps as stand bye) 2- Supply of 40 HP TEFC Electric Motor 2900 RPM suitable to operate on 415 +/- 10% Volts, 3 Phase, 50 Hz AC supply 3- Supply of MS fabricated heavy duty base plate for mounting above Pump and Motor

Supply of fully Automatic Air cooled Star Delta starter cum panel. upto 60 HP Under this Sheet metal fabricated cubical type dust & vermin proof wall mounted type with stand of M.S. angle iron cubical with front door opening. with rubber card lining to prevent dust & moisture dully painted with super enamel gray paint

Power Wiring Material- Complete power wiring to carry out wiring from main to Pump House control panel to starter and to motors as detailed below: (i) 4 SQmm 3 core submersible cable- 80Mt. (ii) 10 SQmm 3.5core Copper Armourd cable-20Mt.

Earthing Material- Complete double earthing materials such as earth plate, earth strips, coal, salt etc. required as per IE rules.

Supply of main piping and valves comprising of following: Suction Side - (i) CID/F Sluice Valve of size 80 mm with hand wheel class 1.0 PN - 2 Nos. (ii) MSD/F bend 90º x 80 mm - 4Nos. (iii) MSD/F taper size pump inlet x 80 mm - 2Nos. (iv) MSD/F pipe 80 mm size in 3 m length - 4Nos. Delivery Side - (i) Cast steel sluice valve 80 mm size of class 150 ASA -2Nos. (ii) Cast steel swing check valve 80 mm size of class 150 ASA - 2 Nos. (iii) MSD/F enlarger pump outlet x 80 mm - 2 Nos (iv) MSA /F Tee size 80 mm x 80 mm x 80 mm - 2 Nos. (v) Blind flange 80 mm size - 1 No. (vi) MSD/F distance piece 80 mm size in 1.5 m length -2 Nos. (vii) MSD/F distance piece 80mm size in 3 m length -2 Nos. (viii) MSD/F pipe 80 mm size in 2.0 m length -1 No (ix) Nuts, Bolts, Rubber / Fibre packing for jointing above pipes and specials - 1 Set Bye Pass Arrangement- (i) 80mm size cast steel gate valve with hand wheel of class 150ASA - 2 Nos. (ii) 80mm size cast steel swing check valve of class 150 ASA - 1 No. (iii) 80 mm x 80 mm x 80 mm MSA/F Tee - 1 No. (iv) MSD/F bend 90º x 80 mm - 2Nos.

Gauges- (i) Presssure Gauge 100 mm dial with control cock and fittings of range 0-70 Kg/cm2 - 2 Nos. (ii) Compound cock gauge 100 mm dial with control cock and fittings of range 0- ±1 Kg/cm2 - 2Nos. (iii) Complete with all fitting

Supply of rubber resistance sheet of size 1m x 2m x 0.025m

S/o 50 KVA fully automatic Servo Control Voltage Stabilizer suitable for regulating incoming voltage 280 to 460Volt , outgoing voltage 415Volt with change over switch and 3Core copper cable.

32 Amp MCCB

Level Transmitter (0-5 Mtr. Sensing Range)

Intelligent GSM based Mini Remote Terminal Units/PLC with analog and digital parameters and features as specified mini T.W. and transmit data on GSM backbone. GSM based wireless Communication system capable to transfer and gather data from remote sites to master Control Stations (Voltage, Current, Power factor, Pumping running Hour etc.) with 6 Amp. Automatic Voltage stabilizer with high and low cut and isolation transformer, including Erection, testing and commissioining and modification of starter with AC and DC relays and necessary wiring complete in all respect.

Installation, Testing and Commissioning of Pumping Plants with acessories inside the pump house but without civil works such as laying of foundations, cable trenches etc.

Painting of entire installation with 2 coats of super enamel paint as per direction of Engineer-Incharge of works.

Intenal and external electrification of all pump house, staff quarters and campus.

Cartage of Pumping Plants and all acessories from store to site of work including head load charges from road site to site of works as required. @5% of Total A (Upto 2Km)

Supply of all materials, labour and T & P etc. and construction of following works as per type design and drawing.

Boulder Filled Gallery with 4 m cross wall

Roughening Filter

Supply and installation of Bucket Type Chlorinator of 25 L Capacity

Supply of all material, labour, T&P etc. all complete and provide 90 cm high RCC cross wall at gadhera tapping point for the protection of intake from flood storm.

Random Rubble stone masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royalties etc. complete.

Random rubble masonry laid dry in breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:2:4 (1 Cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Supply, Carting (site store to trench), lowering them into trenches, laying true to alignment and gradient, laying and jointing of pipe line by welding for making up lengths as required for proper completion of work of following grade & sizes ((Excluding cartage from Rail Head to site store.) MS ERW Pipe Yst 210

50 mm dia., 4.8 mm thick.

100 mm dia., 4.8 mm thick.

Excavation in soil mixed with single boulders etc. requiring the use of special T&P, if any, for pipe line trenches including lift up to 1.5m and lead up to 30m with back filling, watering, ramming of excavated earth in the trenches.

excavation in decomposed, weathered or soft rock by blasting or by drawbars, pickaxes etc. or by both methods, including supply of all materials, labour, T&P etc.

50 mm dia. Cast steel Sluice / Scour Valve, W.P. 50 Kg/cm2

100 mm dia. Cast steel Sluice / Scour Valve, W.P. 50 Kg/cm2

50 mm dia. Cast steel Reflux / Swing Check Valve, W.P. 50 Kg/cm2

100 mm dia. Cast steel Reflux / Swing Check Valve, W.P. 50 Kg/cm2

50 mm dia. Cast steel Double Ball Air Valve Flanged type, W.P. 25 Kg/cm2

Construction stone masonry Wheel Valve / Air valve chamber 60x60x60 cm, inside in 1:4 cement & sand mortar with MS MH cover on top the chamber with proper locking arrangement.

Supply of all materials, labour, T & P etc. and Construction of Thrust Block as per type design complete (1 in 200 m length Pipeline)

Size of Anchor Block - 0.8m x 0.8m x 1.1m

Size of Anchor Block - 0.6m x 0.6m x 1m

Size of Anchor Block - 0.5m x 0.5m x 0.8m

Size of Anchor Block - 0.5m x 0.5m x 1m

Size of Anchor Block - 0.8m x 0.8m x 1.2m

Cartage of pipes, specials, valves and fittings from rail head up to site of work including loading, unloading and stacking complete.

By truck distance 30 km

By head load distance 0.5 km

Random rubble masonry laid in 1:6 cement and sand mortar breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete.

Random rubble masonry laid dry in breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:2:4 (1 Cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Supply of all materials, labour and T & P etc. and construction of R.C.C. Clear Water Reservoir of following Capacity in K.L. as per type design and drawing including fixing of pipes and fittings including cartage of materials etc. complete.

10 KL Capacity

20 KL Capacity /Sump for t/w

40 KL Capacity

45 KL Capacity

60 KL Capacity

75 KL Capacity- 2 Nos

90 KL Capacity

Earth work in excavation by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains (not exceeding 1.50m in width or 10.0sqm in plan) including dressing of sides and ramming of bottoms, lift up to 1.50m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m in all kinds of soil.

Extra excavation for site development for CWR

Supply & Fixing an Iron Board and Printing on it as well as writing the details of Work on it.

Random Rubble stone masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royalties etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:2:4 (1 Cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

DISTRIBUTION SYSTEM: Providing, Supply and Carting from site store to site of work, Laying & Jointing of G.I. screwed pipes (including cost of all jointing materials like specials, white lead, hemp and oil etc.) in trenches with its cutting, threading and testing of pipe line etc complete. Medium Duty (class 'B')

Medium Duty (class 'B') 15 mm (For House Connection)

Medium Duty (class 'B') 20 mm

Medium Duty (class 'B') 25 mm

Medium Duty (class 'B') 32 mm

Medium Duty (class 'B') 40 mm

Medium Duty (class 'B') 50 mm

Medium Duty (class 'B') 65 mm

Medium Duty (class 'B') 80 mm

Medium Duty (class 'B') 100 mm

Medium Duty (class 'B') 125 mm

Excavation in soil mixed with single boulders etc. requiring the use of special T&P, if any, for pipe line trenches including lift up to 1.5m and lead up to 30m with back filling, watering, ramming of excavated earth in the trenches.

Supply and fixing of the following fittings including cartage of materials, labour, T & P etc complete but excluding the cost of excavation and chamber. G.M. Wheel valves (Class I) as per IS 778/1971

32 mm dia.

40 mm dia.

50 mm dia.

65 mm dia.

80 mm dia.

C.I. Air Valve (Screwed) 15 mm dia

Construction stone masonry Wheel Valve chamber 60x60x60 cm, inside in 1:4 cement & sand mortar with MS MH cover on top the chamber with proper locking arrangement.

Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of ferrule including tapping the main, but excluding the cost of earth work and cost of all materials.

Providing and fixing brass ferrule 15mm dia. nominal bore for domestic connections.

Providing and fixing of PTMT bib cock 15 mm dia. nominal bore for domestic connections.

Cartage of pipes, specials, valves and fittings from rail head up to site of work including loading, unloading and stacking complete.

By truck distance 30 km

By head load distance 0.5 km

Dismantling of cement concrete road pavement for laying different sizes of pipes, stacking the serviceable materials and disposal of waste materials upto a distance of 50 m including supply of materials, labour, T&P etc. complete.

Random rubble masonry laid in 1:6 cement and sand mortar breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete.

Random rubble masonry laid dry in breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:2:4 (1 Cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

M/S SHAILESH KUMAR