Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹77.5 LAccepted-AOC | ₹77.5 L | 1 | Accepted-AOC First lowest bidder |
| 2 | 2₹80.7 L+₹3.2 L (4.15%)Rejected-AOC | ₹80.7 L+₹3.2 L (4.15%) | 2 | Rejected-AOC Second lowest bidder |
| 3 | 3₹85.0 L+₹7.5 L (9.64%)Rejected-AOC | ₹85.0 L+₹7.5 L (9.64%) | 3 | Rejected-AOC Third lowest bidder |
| 4 | 4₹1.1 Cr+₹28.8 L (37.2%)Rejected-AOC | ₹1.1 Cr+₹28.8 L (37.2%) | 4 | Rejected-AOC Fourth lowest bidder |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹1.0 Cr
EMD Value
₹2.1 L
Closing Date
21 Mar 2024, 4:00 pmClosed
Executive Engineer, Anti Erosion Division
Farakka Barrage Project, P.O. Farakka Barrage, Dist. Murshidabad, West Bengal, PIN 742212
As per tender document
2024_FBPF_800424_1
GM/FBP-58 of 2023-24
Open Tender
Civil Works
Item Rate
75 days
Birnagar upstream left bank of rover Ganga
As per tender document
2 documents required · 2 mandatory
₹0
₹2.1 L
Yes
16 May 2024
13 Mar 2024
22 Mar 2024
13 Mar 2024
21 Mar 2024
13 Mar 2024
Amount
Supply of RCC (1:2:4) Porcupine (having 6 members each) of size of each member 0.10m x0.10mx 3.00 m reinforced with 4 (four) nos of 8 mm dia M.S. rod & 6mm dia MS stirrups having 27 cm interval holes of 20 mm dia at 50 cm inside from both ends and in same face and in either face of post another two nos of hole of size 20 mm dia at 65 cm inside from both ends including properly curing and supply at work site including assembling , laying on land , fixing & tying of bushes with G.I binding wire as directed.
Supplying at site and laying in position UV stabilized needle punched, stapled fibre / continuous filament polypropylene non-woven geotextile of 300 gsm as filter, as per specification, including cost of preparing the bed, placing the geotextile as per profile with at least 15cm lapping, wherever required and anchorage at top, sewing / welding the overlapped portion, storage and transportation by all means, complete as per direction of the Engineer-in-charge.
Supplying fitting, fixing Darma mat in flowing or stagnant water or in dry areas with 16 SWG GI wire as per direction of the Engineerr-in-charge. B) Where boats are necessary
Supplying fitting and fixing and tying the porcupine to each other by steel wire rope@ 6 mm per metre (GI Guy rope 6 mm Steel core) near the top and bottom third portion of each porcupine and anchored into the river bed and bank as necessary by using anchor block with anchor bolt with clamp as per direction of the Engineer-in-Charge.
M 15 RCC block of size 1.25 m x 1.25 m x 1m. Cast in-situ with centering , shuttering, and removal of formwork for mass concrete including proper curing as per direction of the Engineer-in-Charge.
Making cubical bamboo porcupine cages with bamboo of 60 mm to 75mm dia. having length of 2 metre each for all horizontal and vertical struts and 2.8 metre length for diagonal struts, 3 nos horizontal and 3 nos vertical struts should be placed equi-distant from each face to make the square cage of outer dimension 75 cm x 75 cm and projecting each strut by 60 cm on all directions. Two nos dioganals or cross bamboo posts should be placed on each face having their centre tied with the centre of cage properly including fitting, fixing corners, vertical, horizontal and diagonal struts with iron nails not less than 20 cm long and tying corners with 16 SWG galvanized iron wire, filling in the cages with boulders / lump aggregates. Cages builts with 10 SWG hexagonal or square pattern 10 cm mesh, with proper lapping, tying and sewing with 10 SWG GI wire including cost of all materials, carriage to site and laying the same in the bed or slope of the river, filling the same with the filler materials complete as per direction of the Engineer - in - Charge but excluding the cost & carriage of boulder / lump aggregate up to site. ( N.B::- If G I wirenetting is not considered then Rs. 348.00 per cage may be deducted from the following costs, towards cost of wire netting including OH and conctarcor's profits.) For cages of size 75cm x 75cm x 75cm with boulder (a) Single cage
Supply of stone boulder at site including Royalty, loading, unloading, transportation, stacking, stacking unloadedboulder on private land all complete - Pakur source (Each weighing 25 kg & above)
Making and placing dip trees of single bamboo with branches (Minimum 8m. in each length and 7.50 cm. average diameter) tied by 10 SWG G I wire at 3 different locations of the bamboo with 3 nos empty cement polythene bags filled with single boulder weighing 25kg to 35 kg in each bag and submerging the dip trees under water, tying the same at the bank on 1.5 m. long pegged bamboo pin (2/3rd. driven) with 10 SWG GI wire as per direction of the Engineer-in-charge including cost of all materials, hire charges of boat, labour charges,carriage of all materials etc.complete but excluding the cost of boulders and its carriage upto site.
HILSA ENTERPRISES
HUMAYUN SK. CONSTRUCTION
M/S N. ISLAM AND CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .