Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Name of Package : Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Specification No. :

Completion Period 11 Months

Name of Package :

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Enter following details of the bidder

Specify type of Bidder [Select from drop down menu] Individual Firm

Name of Sole Bidder [Individual Firm]

Address of Registered Office & Mobile Numbers …….. …… ………. ……….

पावर ग्रिड कारपोरेशन ऑफ इंडिया लिमिटेड

POWER GRID CORPORATION OF INDIA LTD.

WRTS-II,RHQ,VADODARA

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Installation Charges- Schedule Items for CONSTRUCTION OF B-1,B-2, B-3, C & D TYPE RESIDENTIAL QUARTERS AT BHUJ SUBSTATION

Sl. No. SAC Whether SAC in column ‘3’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘5’ is confirmed. If not indicate applicable rate of GST # Description (DSR'18 Items- Civil Works) Unit Quantity Unit Erection Charges Deduction of GST factor considered in DSR Unit Erection Charges excluding GST Total Erection Charges excl GST Total Tax GST Total Erection Charges incl. GST

(Service Accounting Codes)

PART -A (QTRS) : Schedule Items (Civil) as per DSR 2018

1 995428 18% 1.1 Carriage of materials by mechanical transport including loading, unloading and stacking 1.1.2 EARTH upto 1.00 km. CuM 1099.00 131.17 0.0000 131.17 144155.83 25948.05 170103.88

2 995433 18% 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soil CuM 598.43 181.85 0.1405 159.45 95418.23 17175.28 112593.52

3 995433 18% 2.8 Earth work in excavtion by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 mtr. In width or 10 sqm on plan) including dressing of sides and ramming of bottoms lift up to 1.5 mtr. Including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 mtr. 2.8.1 All kind of soil CuM 1867.00 252.30 0.1405 221.22 413015.43 74342.78 487358.21

4 995433 18% 2.10 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc and disposing of the suplus excavated soil as directed, within a lead of 50m: 2.10.1 All kinds of soil. 2.10.1.2 Pipes, cables etc exceeding 80 mm dia but not exceeding 300mm dia Mtrs 255.00 364.20 0.1405 319.33 81430.07 14657.41 96087.49

5 995433 18% 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides, of the foundation etc. in layers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering, lead upto 50 mtrs and lift upto 1.5 mtrs. Cu.m. 2119.44 219.65 0.1405 192.59 408185.00 73473.30 481658.30

6 995433 18% 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials. 2.26 1 All kinds of Soil Cu.m. 1672.34 90.40 0.1405 79.26 132555.49 23859.99 156415.48

7 995433 18% 2.34 Supplying chemical emulsion in sealed containers including delivery as specified 2.34.1 Chloropyriphos/Lindane emulsifiable concentrate of 20% Ltrs. 505.00 200.85 0.1405 176.11 88934.02 16008.12 104942.14

8 995454 18% 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering : All works upto plinth level. 4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) CuM 48.27 5789.60 0.1405 5076.37 245036.38 44106.55 289142.93

9 995454 18% 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor,etc., up to floor five level, excluding the cost of centering,shuttering and finishing : 4.2.3 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) Cum 20.00 8554.50 0.1405 7500.66 150013.15 27002.37 177015.52

10 995457 18% 4.3 Centering and shuttering including strutting, propping etc. and removalof form work for : 4.3.1 Foundations, footings, bases for columns SqM 5.00 284.85 0.1405 249.76 1248.79 224.78 1473.58

11 995454 18% 4.10 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). SqM 197.00 347.90 0.1405 305.04 60093.20 10816.78 70909.98

12 995454 18% 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. per 50 kg cement 52.50 56.55 0.1405 49.58 2603.13 468.56 3071.70

13 995454 18% 4.13 Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. SqM 197.00 110.00 0.1405 96.45 19000.44 3420.08 22420.52

14 995454 18% 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. SqM 364.00 614.05 0.1405 538.40 195979.13 35276.24 231255.38

15 995457 18% 5.9 Centring and shuttering including strutting propping etc. and removal of form for : 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. SqM 76.91 284.85 0.1405 249.76 19208.96 3457.61 22666.57

16 995457 18% 5.9.2 Walls (any thickness) including attached pilasters, buttresses, plinth & string courses etc. SqM 787.00 609.30 0.1405 534.24 420446.38 75680.35 496126.73

17 995457 18% 5.9.3 Suspended floors, roofs, landings, balconies and access platform SqM 1695.42 693.05 0.1405 607.67 1030259.39 185446.69 1215706.08

18 995457 18% 5.9.5 Lintels, beams, plinth beams, girders, bressumers & cantilevers SqM 2366.37 552.05 0.1405 484.04 1145422.67 206176.08 1351598.75

19 995457 18% 5.9.6 Columns, pillars, piers abutments posts & struts SqM 1592.49 733.70 0.1405 643.31 1024471.65 184404.90 1208876.54

20 995457 18% 5.9.7 Stairs (excluding landings) except spiral staircases. SqM 71.70 622.35 0.1405 545.68 39125.38 7042.57 46167.95

21 995457 18% 5.9.13 Vertical and horizontal fins individually or forming box louvers,bands,facias,and eaves boards. SqM 670.50 1023.55 0.1405 897.46 601745.09 108314.12 710059.21

22 995457 18% 5.9.15 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like SqM 87.00 284.85 0.1405 249.76 21729.02 3911.22 25640.25

24 995457 18% 5.9.19 Weather shade, chajjas, corbels etc. including edges. SqM 162.72 766.75 0.1405 672.29 109395.49 19691.19 129086.68

25 995454 18% 5.11 Extra for additional height in centring &, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels over a height of 3.5 m for every additional height of 1m or part thereof (Plan area to be measured) 5.11.1 Suspended floors, roofs, landings, beams and balconies (Plan area to be measured) SqM 72.00 287.50 0.1405 252.08 18149.93 3266.99 21416.92

26 995454 18% 5.22 Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in postion and binding all complete up to plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kgs 4044.01 83.50 0.1405 73.21 296076.14 53293.70 349369.84

27 995454 18% 5.22A Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in postion and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kgs 92815.00 83.50 0.1405 73.21 6795311.27 1223156.03 8018467.30

28 995478 18% 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Mtrs 424.00 58.90 0.1405 51.64 21897.06 3941.47 25838.53

29 5.33 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). 0.00 0.00

B) 995454 18% 5.33.2 All works above plinth level upto floor V level CuM 573.20 9400.85 0.1405 8242.74 4724741.10 850453.40 5575194.49

30 995454 18% 5.35 Add for using extra cement in the items of design mix over and above the specified cement content therein. Quintals 435.54 673.30 0.1405 590.36 257123.26 46282.19 303405.45

31 995456 18% 6.1 Brick work with common burnt clay F .P .S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) CuM 80.00 6157.45 0.1405 5398.90 431912.32 77744.22 509656.54

32 995456 18% 6.13 Half brick masonry with common burnt clay F .P .S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SqM 2067.00 932.10 0.1405 817.27 1689303.55 304074.64 1993378.19

33 995456 18% 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry . SqM 2067.00 80.10 0.1405 70.23 145170.28 26130.65 171300.93

34 995456 18% (7008 - 2602) Extra for using F .P .S. (non modular) clay fly ash bricks class designation 7.5 instead of Common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1000 Nos 206.00 300.00 0.1405 263.04 54186.76 9753.62 63940.38

35 995456 18% 6.32 Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : 6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 611.00 7752.90 0.1405 6797.81 4153460.68 747622.92 4901083.60

36 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 8.2.1 Rajnagar plain White marble/Udaipur green marble/Zebra black marble 0.00 0.00

37 8.2.2 Granite of any colour and shade 0.00 0.00

38 995474 18% 8.4 Extra for fixing marble /granite stone, over and above corresponding basic,item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. Mtrs 103.00 434.25 0.1405 380.75 39217.67 7059.18 46276.85

39 995474 18% 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Each 64.00 734.55 0.1405 644.06 41219.82 7419.57 48639.38

40 995474 18% 8.9 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8.9.1 8mm thick 8.9.1.2 Granite of any colour and shade SqM 5.67 2926.85 0.1405 2566.29 14550.85 2619.15 17170.00

41 995476 18% 9.1 Providing wood works in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length(hold fast lugs or dash fastners shall be paid seperately.) 9.1.1 Second class teak wood CuM 3.62 130183.05 0.1405 114145.59 413207.05 74377.27 487584.32

42 995476 18% 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws SqM 275.00 3023.95 0.1405 2651.42 729141.82 131245.53 860387.35

43 995476 18% 9.22 Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) 9.22.1 On one side only SqM 49.50 441.50 0.1405 387.11 19161.99 3449.16 22611.15

44 995476 18% 9.31 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, as per directions of Engineer-in-charge: 9.31.2 30 mm thick shutters SqM 161.50 2382.40 0.1405 2088.91 337358.70 60724.57 398083.27

45 995476 18% 9.46 Providning and fixing curtain rods of 1.25 mm thick chromium plated brass plate,with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs etc, wherever necessary complete: 9.46.3 25 mm dia. Mtrs 322.74 480.15 0.1405 421.00 135873.40 24457.21 160330.61

46 995476 18% 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.2 Fixed to openings/wooden frames with rawl plugs & screws etc. Kgs 3258.00 183.50 0.1405 160.89 524193.77 94354.88 618548.65

47 995476 18% 9.87 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : 9.87.1 150 mm Each 57.00 118.10 0.1405 103.55 5902.41 1062.43 6964.85

48 995476 18% 9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 23.00 806.45 0.1405 707.10 16263.35 2927.40 19190.75

49 995476 18% 9.90 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. 9.90.2 50 mm Each 92.00 271.25 0.1405 237.83 21880.75 3938.54 25819.29

50 995476 18% 9.91 Providing and fixing chromium plated brass 50mm cupboard or wardrobe knob with nuts complete; Each 92.00 121.60 0.1405 106.62 9809.03 1765.63 11574.66

51 9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 0.00 0.00

52 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 0.00 0.00

53 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 0.00 0.00

54 9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour & shade with necessary screws etc. complete 0.00 0.00

55 9.114 Providing and fixing magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete. 0.00 0.00

56 995476 18% 9.115 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer in charge. One set 188.00 339.75 0.1405 297.90 56004.38 10080.79 66085.17

57 995476 18% 9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. Mtrs 240.00 391.65 0.1405 343.40 82416.48 14834.97 97251.45

58 995476 18% 9.124 Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge. 9.124.2 Decorative finish (both side wood grained finish) SqM 102.50 3162.65 0.1405 2773.04 284236.41 51162.55 335398.96

59 995476 18% 9.130 Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. 9.130.1 With decorative veneering on one side and commercial veneering on other side SqM 456.00 1647.95 0.1405 1444.94 658891.01 118600.38 777491.40

60 995476 18% 10.3 Providing & fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x 5 mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. SqM 22.50 8670.50 0.1405 7602.37 171053.27 30789.59 201842.85

61 995476 18% 10.14 Providing and fixing pressed steel door frames conforming to IS:4351 manufactured from commercial mild steel of 1.60 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm or base ties of 1.60mm, pressed mild steel welded or rigidly fixed together by mechanical means, including MS pressed butt hinges 2.5mm thick with mortar guards lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of surface as directed by the engineer in charge. 10.14.1 Profile B 10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb Mtrs 499.60 417.60 0.1405 366.16 182931.14 32927.60 215858.74

62 995476 18% 10.14.2 Profile C 10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb Mtrs 209.10 444.35 0.1405 389.61 81467.41 14664.13 96131.55

63 995476 18% 10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 122.00 172.25 0.1405 151.03 18425.69 3316.62 21742.31

64 995476 18% 10.25 Steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required 10.25.2 In gratings, frames, guard bars, ladders, railings, brackets, gates and similar works. Kgs 3575.00 131.00 0.1405 114.86 410631.30 73913.63 484544.94

65 995477 18% 10.26 Providing and fixing hand rail of approved size by welding etc. to steel ladder raling balcony raling , stair case raling and similar works including applying a priming coat of approved steel primier. 10.26.1 M.S. Tube Kgs 1280.00 145.65 0.1405 127.71 163465.15 29423.73 192888.87

66 995476 18% 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Kgs 60.00 575.45 0.1405 504.56 30273.56 5449.24 35722.81

67 995474 18% 11.23 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : 11.23.5 Udaipur green marble SqM 225.00 1991.50 0.1405 1746.16 392886.89 70719.64 463606.53

68 995474 18% 11.24 Extra for pre finished nosing to treads of steps of marble stone. Mtrs 260.00 530.25 0.1405 464.93 120881.19 21758.61 142639.81

69 995474 18% 11.25 Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre . SqM 120.00 622.75 0.1405 546.03 65523.89 11794.30 77318.19

70 995474 18% 8.31 (11.36) Providing and Fixing 1st quality ceramic glazed wall tiles conforming to IS 15622(thickness to bespecified by the manufacturer) of approved make in all colours, shades except burgundy, bottle-green, black of any size as approved by the Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement mortar 1:3 (1 Cement:3 Coarse Sand) and jointing with grey cement slurry @ 3.3 kg per sq m including pointing in white cement mixed with pigment of matching shade complete. SqM 783.00 1030.30 0.1405 903.38 707343.18 127321.77 834664.96

71 995474 18% 11.40 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory , Grey , Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. SqM 157.00 1170.70 0.1405 1026.48 161157.30 29008.31 190165.61

72 995474 18% 11.41 Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. 11.41.2 Size of tile 600 X 600 mm SqM 1507.00 1500.55 0.1405 1315.69 1982752.17 356895.39 2339647.56

73 995474 18% 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. 11.46.2 Size of Tile 600x600 mm SqM 204.00 1545.85 0.1405 1355.41 276504.52 49770.81 326275.33

74 995474 18% 11.48 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge. 11.48.2 Size of Tile 600x600 mm SqM 1507.00 241.45 0.1405 211.71 319040.03 57427.20 376467.23

75 995474 18% 11.50 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. SqM 1507.00 -11.00 0.1405 -9.64 -14535 -2616 -17151.13

76 995453 18% 12.20 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. SqM 8.87 584.55 0.1405 512.54 4546.22 818.32 5364.53

77 995453 18% 12.21 Providing gola 75 X 75 mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1: 3 ( 1 cement : 3 fine sand) as per standard design: 12.21.1 In 75 X 75 mm deep chase Mtrs 502.23 237.25 0.1405 208.02 104475.29 18805.55 123280.84

78 995453 18% 12.22 Making khurras 45 x 45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. Each 31.00 244.05 0.1405 213.99 6633.54 1194.04 7827.57

79 995453 18% 12.41 Providing and fixing on wall face unplasticised -Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 12.41.2 110 mm diameter Mtrs 226.00 305.05 0.1405 267.47 60448.31 10880.70 71329.01

80 995453 18% 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.42.1 Coupler 12.42.1.2 110 mm Each 32.00 117.80 0.1405 103.29 3305.22 594.94 3900.16

84 995453 18% 12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised -PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 12.43.2 110 mm Each 87.00 288.80 0.1405 253.22 22030.34 3965.46 25995.80

85 995453 18% 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams. Each 32.00 47.25 0.1405 41.43 1325.73 238.63 1564.37

87 995472 18% 13.5 15 mm cement plaster on rough side of single or half brick masonry wall of mix : 13.5.2 1:6 ( 1 cement : 6 coarse sand) SqM 3245.00 303.90 0.1405 266.46 864669.44 155640.50 1020309.94

88 995472 18% 13.9 Cement plaster 1:3 ( 1cement : 3 coarse sand) finished with a floating coat of neat cement : 13.9.1 12 mm cement plaster SqM 140.00 350.15 0.1405 307.01 42982.03 7736.76 50718.79

89 995472 18% 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 Cement : 5 Coarse sand) finished with top layer 6 mm thick cement plaster 1:6 (1 Cement : 6 Fine sand) SqM 4134.00 399.30 0.1405 350.11 1447353.09 260523.56 1707876.65

91 995472 18% 13.24 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: 13.24.2 In two coats SqM 70.00 878.40 0.1405 770.19 53913.20 9704.38 63617.57

92 995472 18% 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. SqM 7758.00 196.70 0.1405 172.47 1338008.42 240841.52 1578849.93

93 995473 18% 13.37 White washing with lime to give an even shade: 13.37.1 New work (three or more coats) SqM 855.00 28.55 0.1405 25.03 21403.11 3852.56 25255.67

94 995473 18% 13.45 Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. SqM 795.00 232.00 0.1405 203.42 161718.54 29109.34 190827.88

95 995473 18% 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) SqM 3175.00 161.15 0.1405 141.30 448620.12 80751.62 529371.74

96 995473 18% 13.68 French spirit polishing : 13.68.1 Two or more coats on new works including a coat of wood filler. SqM 296.10 351.15 0.1405 307.89 91166.61 16409.99 107576.60

97 995473 18% 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.83.2 Two coats SqM 7545.00 113.90 0.1405 99.87 753507.67 135631.38 889139.05

98 995473 18% 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work SqM 310.00 121.55 0.1405 106.58 33038.58 5946.94 38985.52

99 13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 0.00 0.00

A) 995473 18% 13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre SqM 297.00 57.05 0.1405 50.02 14856.51 2674.17 17530.68

B) 995473 18% 13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre SqM 7779.00 60.00 0.1405 52.61 409241.56 73663.48 482905.04

100 995428 18% 16.91 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator , filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per anufacturer's specifications & direction of Engineerin-Charge. 16.91.1 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern. SqM 158.75 884.75 0.1405 775.76 123151.30 22167.23 145318.54

101 995478 18% 17.1 Providing and fixing water closet Squatting pan (Indian WC type) with 100 mm sand cast iron P or S trap, 10 litres low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever) confirming to IS 7231 with all fittings and fixtures complete including, cutting and making good the walls and floors wherever required. 17.1.1 White vitreous china Orissa pattern WC pan of size 580 mm x 440 mm with integral type foot rest, Each 21.00 5421.50 0.1405 4753.62 99825.95 17968.67 117794.63

102 995478 18% 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P . Brass pillar taps, 32 mm C.P . brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P . brass pillar taps Each 24.00 2846.90 0.1405 2496.19 59908.46 10783.52 70691.98

103 995478 18% 17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Each 20.00 4403.80 0.1405 3861.29 77225.78 13900.64 91126.42

104 995478 18% 17.10 Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per IS:13983 with CI brackets and stainless steel plug 40 mm, including painting of fittings & brackets cutting and making good the walls wherever required 17.10.1 Kitchen sink with drain board 17.10.1.4 Size 510 x 1040 bowl depth 178 mm Each 21.00 5182.70 0.1405 4544.23 95428.93 17177.21 112606.14

105 995478 18% 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin-charge. Each 47.00 883.05 0.1405 774.27 36390.49 6550.29 42940.77

106 995478 18% 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia Each 20.00 6113.6 0.1405 5360.46 107209.12 19297.64 126506.76

107 995478 18% 17.28 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete 17.28.1 Semi Rigid pipe 17.28.1.1 32 mm dia Each 48.00 87.70 0.1405 76.90 3691.01 664.38 4355.40

109 995478 18% 17.30 Providing and fixing in position 25 mm diameter mosquito proof coupling of approved muncipal design Each 52.00 45.00 0.1405 39.46 2051.73 369.31 2421.04

110 995478 18% 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 45.00 1283.05 0.1405 1124.99 50624.51 9112.41 59736.92

111 995478 18% 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P . Brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 3.00 841.80 0.1405 738.10 2214.29 398.57 2612.86

112 995478 18% 17.34 Providing and fixing toilet paper holder : 17.34.1 C.P. brass Each 7.00 583.75 0.1405 511.84 3582.86 644.91 4227.77

113 995478 18% 17.69 Providing and fixing PTMT Waste Coupling for wash basin and sink,of approved quality and colour. 17.69.2 Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms Each 21.00 118.50 0.1405 103.90 2181.94 392.75 2574.69

114 995478 18% 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 16.00 158.55 0.1405 139.02 2224.29 400.37 2624.66

115 995478 18% 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour , weighing not less than 88 gms. Each 49.00 228.20 0.1405 200.09 9804.30 1764.77 11569.07

116 995478 18% 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. Each 45.00 595.50 0.1405 522.14 23496.27 4229.33 27725.60

117 995478 18% 17.74 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. Each 49.00 642.30 0.1405 563.17 27595.53 4967.20 32562.72

118 995478 18% 17.78 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover , and cistern fittings, nuts, bolts and gasket etc complete. Each 27.00 13852.45 0.1405 12145.94 327940.51 59029.29 386969.80

119 18.10 Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls etc. Internal work exposed on wall 0.00 0.00

120 18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 0.00 0.00

121 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 0.00 0.00

External work 0.00 0.00

122 995424 18% 18.13 Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc complete 18.13.2 50 to 80 mm nominal bore Each 7.00 1432.75 0.1405 1256.25 8793.73 1582.87 10376.60

123 18.17 Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end) 0.00 0.00

124 995424 18% 18.18 Providing and fixing ball valve (brass) of approved quality High or low pressure with plastic floats complete. 18.18.3 25 mm nominal bore Each 23.00 394.00 0.1405 345.46 7945.64 1430.21 9375.85

125 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end) 18.19.3 40 mm nominal bore 0.00 0.00

126 18.19.4 50 mm nominal bore 0.00 0.00

127 995424 18% 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions : 18.21.2 45 cm length 18.21.2.1 15 mm nominal bore Each 126.00 83.00 0.1405 72.78 9169.66 1650.54 10820.20

128 995424 18% 18.22 Providing and fixing CP brass shower rose with 15 or 20 mm inlet. 18.22.1 100 mm diameter Each 45.00 151.90 0.1405 133.19 5993.42 1078.82 7072.24

129 995424 18% 18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 12.00 1582.45 0.1405 1387.51 16650.07 2997.01 19647.08

130 18.46 Providing & fixing GI union in GI Pipe including cutting and threading the pipe and making long screws etc. complete ( New work ) 0.00 0.00

131 995424 18% 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.48A Circular tank per litre 23000.00 8.80 0.1405 7.72 177466.02 31943.88 209409.91

132 995424 18% 18.49 Providing & fixing CP brass bib cock of approved quality conforming IS:8931. 18.49.1 15 mm nominal bore Each 48.00 418.95 0.1405 367.34 17632.27 3173.81 20806.07

133 995424 18% 18.51 Providing & fixing CP brass long body bib cock of approved quality conforming IS standards and weighing not less than 690gms 18.51.1 15 mm nominal bore Each 138.00 552.35 0.1405 484.31 66834.11 12030.14 78864.25

134 995424 18% 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore Each 90.00 606.25 0.1405 531.57 47840.86 8611.35 56452.21

135 995424 18% 18.53 Providing & fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 18.53.1 15 mm nominal bore Each 242.00 532.00 0.1405 466.46 112883.82 20319.09 133202.91

136 995424 18% 18.58 Providing and fixing PTMT grating of approved quality and colour 18.58.2 Rectangular tupe with openable circular lid 18.58.2.1 150 mm nominal size square 100mm diametre of the inner hinged round grating Each 89.00 169.00 0.1405 148.18 13188.08 2373.85 15561.93

137 995424 18% 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Each 49.00 130.50 0.1405 114.42 5606.75 1009.22 6615.97

138 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 0.00 0.00

139 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)all around SW pipes including bed concrete as per standard design. 0.00 0.00

140 995424 18% 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 19.4.3 180x150 mm size P type 19.4.3.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 39.00 2409.60 0.1405 2112.76 82397.54 14831.56 97229.10

141 995424 18% 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 19.7.1 Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total wt. of cover and frame to be not less than 38 kg. (wt. of the cover 23 kg and wt. of the frame 15 kg.) 19.7.1.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 54.00 10905.05 0.1405 9561.64 516328.54 92939.14 609267.68

142 995424 18% 19.8 Extra for depth for manholes 19.8.1 Size 90 x 80 cm 19.8.1.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Meter 27.00 7503.00 0.1405 6578.69 177624.73 31972.45 209597.18

143 995476 18% 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Kg 3344.00 464.70 0.1405 407.45 1362522.40 245254.03 1607776.43

144 995476 18% 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Kg 2492.00 554.95 0.1405 486.58 1212569.40 218262.49 1430831.89

145 21.3 Providing and fixing glazing in aluminium door, window,ventilator,shutter and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectual drawings and the directions of Engineer in charge(Cost of aluminium snap beading shall be paid in basic item) 0.00 0.00

146 995476 18% 21.8 Filling the gap in between aluminium frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in Charge complete. 21.8.1 Up to 5mm depth and 5mm width Meter 1610.00 79.45 0.1405 69.66 112156.51 20188.17 132344.68

147 995476 18% 21.11 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineerin-charge complete. 21.11.2 255 X 19 mm Each 352.00 322.65 0.1405 282.90 99581.59 17924.69 117506.27

148 995476 18% 21.15 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. 21.15.3 Polyester powder coated minimum thickness 50 micron aluminium Each 704.00 70.25 0.1405 61.60 43363.44 7805.42 51168.86

149 995453 18% 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry . SqM 271.00 465.60 0.1405 408.24 110633.58 19914.04 130547.63

22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies terraces etc. consisting of following operations. (a) Applying a slurry coat of neat cement using 2.75Kg/sq.m. of cement admixed with water proofing compound conforming to IS:2645 and approved by Engneer in charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. 0.00 0.00

(b)Laying brick bats with mortar using broken bricks/brick bats 25mm to 1115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer in charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer in charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of the junctions of walls and slabs. 0.00 0.00

(c )After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sq.m. of cement admixed with water proofing compound conforming to IS:2645 and approved by the Engineer in charge. 0.00 0.00

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. 0.00 0.00

150 995453 18% (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order & as directed and specified by the Engineer-in-charge. 22.7.1 With average thickness of 120 mm and minimum thickness at Khurra as 65mm SqM 1165.00 1398.50 0.1405 1226.22 1428542.31 257137.62 1685679.92

Total of Schedule Items as per DSR'18 Rates (Schedule 3A) ₹ 51,274,508.53 ₹ 9,229,411.53 ₹ 60,503,920.06

Add percentage (%) above/below +/- on DSR 2018 Rates (to be quoted by contractor) 0.00%

Add Amount above/below +/- on the amount for DSR Items as per quoted percentage ₹ 0.00 ₹ 0.00

Total of Schedule Items (Schedule-3A) ₹ 51,274,508.53

# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

Date : Printed Name :

Place : Designation :

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Installation Charges- Non-Schedule Items for CONSTRUCTION OF B-1,B-2, B-3, C & D TYPE RESIDENTIAL QUARTERS AT BHUJ SUBSTATION

Sl. No. Activity Header / Substation Name SAC Whether SAC in column ‘3’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘5’ is confirmed. If not indicate applicable rate of GST # Description (DSR'16 Items- Civil Works) Unit Quantity Unit Erection Charges Total Erection Charges Total Tax GST

(Service Accounting Codes)

PART -B (QTRS) : Non - Schedule Items (Civil)

1 Bhuj S/s 995433 18% NS-01 Supply and filling of good quality moorum under floor in layers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering, consolidating and dressing complete. ( Measurement shall be based on compacted volume ) CuM 708.00 0.00 0.00

2 Bhuj S/s 995433 18% NS-02 Diluting & injecting chemical emulsion ecluding of the cost of the chemical emulsion) for PRE-CONSTRUCTIONAL ANTI TERMITE treatment and creating a continuos chemical barrier under all round the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes, conduits etc. complete as per specifications. (Plinth area of the building at ground floor only shall be measured for payment) Chloropyriphos/Lindane emulsifiable concentrate of 20% SqM 572.78 0.00 0.00

3 Bhuj S/s 995411 18% NS-03 Providing and fixing rubber shock absorbers of minimum 25 mm dia and 40 mm length to be fixed on back side of door including screws and nuts etc. all complete. Each 179.00 0.00 0.00

4 Bhuj S/s 995428 18% NS-04 Providing and placing cinder/brick bat filling to the sunk floors in toilets/kitchen sunks, well compacted carefully by hand beating to required slopes including consolidation, curing, (mix shall be one part of cement mortar 4 parts of Cinder/brickbat finishing the same with the cement mortor 1:4 (1cement:4 coarse sand) by adding water proofing compound as per manufacturers recommendations including providing 25mm dia PVC drain pipe of required length. For toilet and Kitchen sunkun portions CuM 51.00 0.00 0.00

5 Bhuj S/s 995411 18% NS-05 Providing and fixing 25 to 35mm thick both side semi polished black kadappah stone slab in shelves, fixing in cement mortar 1:3 including necessary cutting and making good the walls, curing and cleaning complete. SqM 235.00 0.00 0.00

6 Bhuj S/s NS-06 Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592-1992 of PRICE/SUPREME/FINOLEX or equivalent make of working pressure 6kg/sq.cm for drainage line including necessary fittings such as couplers, bends, tees, cross tees, cowls, clamps, rubber packing ring etc. confirming to DIN 19561, DIN 19534, IS 14735-99, IS-5382, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose)

A Bhuj S/s 995428 18% A) 40mm outer dia. Metre 239.00 0.00 0.00

B Bhuj S/s 995416 18% B) 75mm outer dia. Metre 458.00 0.00 0.00

C Bhuj S/s 995478 18% C) 110mm outer dia. Metre 216.00 0.00 0.00

7 Bhuj S/s 995424 18% NS-07 Providing, fixing, testing and commissioning uPVC SWR Nahani trap, plain floor trap/ Multi floor trap with strainer/top cover etc. confirming to DIN 19531, DIN 19534, IS 14735-99, IS-5382 of 110 mm dia inlet and 75 mm outlet nominal dia. including fixing PVC reducer of 110mm dia. to 75 mm dia. and jointing with adhessive solvent cement including cost of cutting and making good the walls and floors at all levels etc. complete. Each 141.00 0.00 0.00

8 Bhuj S/s 995411 18% NS-08 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clrestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia. 0.50mm all complete. In sliding aluminium window shutter as well as ventilators Sq.m. 115.03 0.00 0.00

9 Bhuj S/s NS-09 Providing & fixing Hindware make or equivalent bathroom accessories including cutting wall/making holes and making good the surface with the same finish as directed by the Engineer in charge.

A Bhuj S/s 995424 18% A) CP brass high flow single lever concealed diverter with body and plate for bath and shower system equivalent to Kohler make K-72329IN-4FP-CP or Jaquar make FUS-CHR-29227 Each 27.00 0.00 0.00

B Bhuj S/s 995424 18% B) CP brass hand shower (Health faucet) for WC/EWC system equivalent to Jaquar make ALD-CHR-573 or Kohler make K-12925IN-CP Each 23.00 0.00 0.00

10 Bhuj S/s 995472 18% NS-10 Forming groove of uniform size in the external plaster surface as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 20 mm wide and 6 mm deep groove Metre 190.00 0.00 0.00

11 Bhuj S/s 995478 18% NS-11 Providing and fixing C.P. brass towel ring of make kohler cat no- 17528T-CP or Jaquar Continental: ACN-CHR-1121N or equivalent make fixed with PVC cleats and brass screws including cutting and making good the walls wherever required complete as directed by Engineer-in-charge. Each 4.00 0.00 0.00

12 Bhuj S/s 995478 18% NS-12 Providing and Fixing Towel rack with single rail of make Jaquar -Cat No: AHS-CHR-1581 or ,kohler cat no- 17529T-CP or equivalent as approved with Rawl Plugs and brass screws complete as directed by Engineer-in-charge. Each 3.00 0.00 0.00

13 Bhuj S/s 995415 18% NS-13 Providing and fixing liquid soap dispenser horizontal /vertical matt finish with simple push lever of make Jaquar ACN-CHR-1137N or Kohler cat K -10712D-CP or equivalent as approved including cutting and making good the walls, wherever required complete as directed by Engineer-in-charge. Each 4.00 0.00 0.00

14 Bhuj S/s 995424 18% NS-14 Providing and Fixing C.P. brass Central Hole basin mixer without pop up waste system of make Jaquar Model: CON-CHR-167KNB or kohler cat no- 16027IN-4ND-CP or equivalent make as approved with 450mm long copper pipe and brass nuts including cutting and making good the walls wherever required complete as directed by Engineer-in-charge. Each 4.00 0.00 0.00

15 Bhuj S/s 995424 18% NS-15 Providing and Fixing Over head Rose shower with revolving joint (with body rotation), 115 mm long shower arm of make Jaquar Cat No: OHS-CHR-1989 or kohler cat no- 16356IN-A-CP or equivalent make as approved complete as directed by Engineer-in-charge Each 3.00 0.00 0.00

16 Bhuj S/s 995478 18% NS-16 Providing and Fixing Soap dish of make Jaquar Continental ACN-CHR-1131 N or kohler cat no- 17524T-CP or equivalent make as approved with PVC / Wooden plugs and screws including making good the walls wherever required complete as directed by Engineer-in-charge. Each 4.00 0.00 0.00

17 Bhuj S/s 995468 18% NS-17 Providing and fixing 6mm thick Clear mirror with bevelled edge on the wall over 6mm thick polycorbonate sheet with ss screw / stud, machine cut in required size, approved shade & colour etc. complete with all respect at all levels as directed by Engineer-in-charge. (Sample of Mirror shall be got approved from Engineer-in-Charge). Each 3.00 0.00 0.00

18 Bhuj S/s 995424 18% NS-18 Providing and Fixing 32mm CP Brass bottle trap complete with 250 mm long wall connecting pipe of Jaquar ALD-CHR-769 B or kohler cat no- 16407IN-CP or equivalent make as approved of size including CP Wall flange complete as directed by Engineer-in-charge. Each 4.00 0.00 0.00

19 Bhuj S/s 995424 18% NS-19 Providing and fixing white color vitreous China oval shape, under counter wash basin of make of Kohler cat. no. 2211 IN-O or jaquar FLS-WHT-0401 or equivalent as approved of 32mm dia outlet with CP Brass connection, Rubber adopter for waste connection and CI Brackets etc including cutting and making good the walls wherever required complete as per direction of engineer-in-charge. Each 8.00 0.00 0.00

20 Bhuj S/s 995471 18% NS-21 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in alkuminium doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). SqM 28.80 0.00 0.00

21 Bhuj S/s 995411 18% NS-23 Grouting of pressed steel door frames, profile B and Profile C with CC 1:2:4(1 cement:2 sand:4 gardeded agrregate 12.5mm nominal size) CuM 5.76 0.00 0.00

22 Bhuj S/s 995433 18% NS-24 Supply of earth(excluding rock and boulders) at site including royalty,carriage and filling in specified areas in layers not exceeding 200mm in depth,compacting under optimum moisture condition to achieve 95% of Proctor density,finishing etc. all complete, for all leads and lifts with all labour, material, tools, tackles, equipments, safeguards and incidentals as necessary as per drawings,specification and direction of the Engineer-in-charge. CuM 25200.00 0.00 0.00

Total of Schedule 3B ₹ 0.00 ₹ 0.00

# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

Date : Printed Name :

Place : Designation :

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Bidder’s Name and Address (Sole Bidder) : To:

Name : Contract Services

Address : Power Grid Corporation of India Ltd.,

Western Region Transmission syatem -II

Plot No. 54, Near Riya revati resort ,

Sama - savli road, vadodara-390008

Supply & Installation Charges- Schedule Electrical Items for CONSTRUCTION OF B-1,B-2, B-3, C & D TYPE RESIDENTIAL QUARTERS AT BHUJ SUBSTATION

Sl. No. DSR-2018 Item Code SAC Whether SAC in column ‘3’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘5’ is confirmed. If not indicate applicable rate of GST # Description (DSR'18 Items- Electrical Works) Unit Quantity Unit Charges Deduction of GST factor considered in DSR Unit Charges excl. GST Total Erection Charges excl GST Total Tax GST

PART -C (QTRS) : Schedule Items (Electrical) as per DSR 2018

1.Please Refer Indicaive list of approved make /model for all items . 2.All Light fittings are including lamp there is no separate item for Lamp. 0.00

A Conduiting 0.00

1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per technical specifications 0.00

A.1 1.21.1 995461 18% Conduits with required associated accessories -20mm MTRS. 4500 84 14.05% 73.65 331433.58 59658.04

A.2 1.21.2 995461 18% Conduits with required associated accessories - 25mm MTRS. 1300 90 14.05% 78.91 102586.58 18465.59

A.3 1.21.3 995461 18% Conduits with required associated accessories - 32mm MTRS. 300 92 14.05% 80.67 24199.91 4355.98

B WIRING 0.00 0.00

1.7 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel / PVC conduit as required. As per technical specification 0.00 0.00

(Mains wiring from MDB to RCCB of SDB as per single line drawing, & direction of Engr-in-charge.) 0.00

(PVC insulated copper conductor multistrand wires from SDB to 25A/16A Power points as per drawing, & direction of Engr-in-charge). 0.00 0.00

(1100V grade PVC insulated copper conductor multistrand wires From SDB to SB,SDB to 5 A Independent socket, 5A to 5A socket, SB to SB , MDB to Common SDB etc as per Drawing & direction of Engg-In -charge). 0.00 0.00

B.4 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 0.00 0.00

C MODULAR SWITCHES, BOXES, COVER PLATES FOR LIGHT, CEILING FAN, BELL POINTS, BELL STATION, 6A SWITCH SOCKET & 15A POWER SOCKETS :- 0.00 0.00

Supply, installation, testing ,delivery and commissioning of wiring accessories of approved ISI/CE certified make modular range such as modular switches, switch socket outlets, power sockets, etc. for the following with suitable mounting plates & boxes (modular range) in the required configuration As per technical specification, interior layout, drawing, site condition and as per direction of engg-in-charge. 0.00 0.00

1.27 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required (Crabtree make or equivalent approved make) 0.00 0.00

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 0.00 0.00

1way switch for light; fan, Exhaust fan and for 6A Power points of Crabtree Cat.No.ACVSXXW101 (Verona series) or equivalent approved make. 0.00 0.00

single pole, 2way switch for Stair case lighting of Crabtree Cat.No.ACVSXXW102 (Verona series) or equivalent approved make. 0.00 0.00

C.3 1.24.4 998736 18% 3 pin 5/6 amp socket outlet (for Switch board Type SBC) Nos. 163 111 14.05% 97.33 15864.09 2855.54

provided on the same switch board wherever required as per the drawing,site condition & direction of engg-in-charge Crabtree Cat.No ACVKSWW063 (Verona series) or equivalent approved make. 0.00 0.00

10A one way bell push with indicator Dura Crabtree cat ACVSBXW101 or equivalent approved make. 0.00 0.00

C.5 1.26 998736 18% Modular blanking plate on existing modular plate & switch box excluding modular plate as required Crabtree cat ACVPPBWX01 (Verona series) or equivalent approved make. Nos. 62 32 14.05% 28.06 1739.59 313.13

INDEPENDENT POINTS 0.00 0.00

C.6 1.31 998736 18% Supplying and fixing suitable size GI box with modular plate and cover in front in recess, including providing andfixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modularswitch, connection etc. as required. Make Crabtree (Verona series) or equivalent approved make SWITCH BOARD RA Nos. 190 401 14.05% 351.60 66804.03 12024.73

C.7 1.32 998736 18% Supplying and fixing suitable size GI box with modular plate andcover in front in recess, including providing andfixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Make Crabtree (Verona series) or equivalent approved make SWITCH BOARD RB Nos. 108 495 14.05% 434.02 46874.18 8437.35

C.8 1.32& 2.10.1 998736 18% Supplying and fixing suitable size GI box with modular plate andcover in front in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 16 amps modular MCB type-C ,connection etc. as required. Make Crabtree (Verona series)or equivalent approved make SWITCH BOARD RAC Nos. 69 694 14.05% 608.51 41986.85 7557.63

C.9 1.25 998736 18% Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Make crabtree model ACVRFHW005 or equivalent approved make Nos. 105 342 14.05% 299.87 31486.19 5667.51

D CONDUIT, WIRING, SOCKET & TAG BLOCK FOR TELEPHONE POINT :- 0.00 0.00

Supply, laying, delivery ,testing & installation towards telephone point wiring including supply of medium gauge PVC(MMS) conduit (ISI approved), PVC insulated 2 pair of 0.5 mm dia. electrolytic tinned copper wire in a separate PVC conduit from the telephone tag block(EPABX) to individual( telephone outlet point as per the drawing, site condition including its associated accessories and others of the following :- 0.00 0.00

1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 0.00 0.00

D.1 1.21.1 998736 18% Rigid 20MM PVC conduits with required associated accessories MTRS. 450 84 14.05% 73.65 33143.36 5965.80

1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVCinsulated annealed copper conductor, unarmored telephone cablein the existing surface/ recessed steel/ PVC conduit as required. 0.00 0.00

2 pair 0.5mm telephone cable with high density polyethylene insulated, solid annealed high conductivity along with rip cord of approved make Finolex (or) eqvnt. approved Make. 0.00 0.00

D.3 1.24.6 998736 18% Supply,deliverty. installation ,testing and fixing of RJ11 telephone socket outlet of Crabtee Cat No ACVKRTW111 or equivalent approved make in the required configuration as per the drawing, interior layout, site condition including termination at both ends as per specification and as per direction of Engg-in-charge. Set 82 119 14.05% 104.34 8555.90 1540.06

E CONDUIT, WIRING,SOCKET & BOX FOR TV AMPLIFIER OF TV POINTS :- 0.00 0.00

1.21 Supply,delivery, laying and installation towards T.V. antena point wiring with RG8Fcoaxial cable in separate recessed medium gauge(MMS) PVC conduit from Junction box (incorporating the TV Amplifier) to individual T.V. socket as per the drawing, interior layout, site condition and as per direction of engg-in-charge for the following :- 0.00 0.00

E.1 1.21.1 998736 18% Rigid PVC conduits with required associated accessories 20MM MTRS. 450 84 14.05% 73.65 33143.36 5965.80

E.2 1.19 998736 18% Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mmsolid copper conductor PE insulated, shielded with fine tinnedcopper braid and protected with PVC sheath in the existingsurface/ recessed steel/ PVC conduit as required. MTRS. 450 33 14.05% 28.93 13020.60 2343.71

E.3 1.24.7 TV antenna socket outlet 0.00 0.00

998736 18% Supply, testing,delivery,installation and fixing of T.V. socket outlet Crabtree ACVKTOW001 (Verona Series) in the required configuration including termination at both ends as per direction of engg-in-charge. Set 69 119 14.05% 104.34 7199.47 1295.91

F Sub Distribution Board-SDB (Single phase distribution board with RCCB as Incomer & Single pole MCB as Outgoing ) :- 0.00 0.00

Supplying, delivery, erecting, testing & commissioning of Single pole and neutral totally enclosed Distribution Board (Double door type) RCCB / MCB for Power & lighting Sub distribution conforming to IS 13032 & IS:8623 and IEC standard of IP42 flush mounted at location indicated in the drawing complete as required and made from C.R.C.A. sheet steel (not less than 1 mm thick) , powder coated suitable for installation in recess of approved make complete with required busbar per phase , neutral link of required current carrying capacity, required capacity earth bar erected on angle iron frame complete. No fabricated DBs shall be allowed. Only DBs of specified make as per technical specification and as per direction of engg-in-charge shall be used. (horizontal / vertical busbar type) including lugging wiring connection etc. for the following :- 0.00 0.00

F.1 2.3 Supplying and fixing following way prewired SP&N & TPN MCB distributionboard of CRCA steel sheet of not less than 1 mm thick for 240 volts on recess completewith loose wire box, terminal connectors for all incoming andoutgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks,Fully shielded tinned copperbus bar, neutral link, earth bar, detachable din bar, detachable gland plate,interconnections, powder painted including earthing etc. asrequired. (But without MCB/ RCCB/ Isolator) 0.00 0.00

F.1.1 2.3.4 998736 18% 16way, Double door (Havells Pearl Ivory double door Cat DHDPSHODPW16 or Equivalent approved make ) for B1,B2,B3 & C type Quarters Nos. 20 2453 14.05% 2150.81 43016.22 7742.92

F.2 2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB),having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioningetc. as required. 0.00 0.00

2.14.2 998736 18% 40 amps (30mA residual current,Short ckt 10kA,Test button IS12640 Part-1 ) of L&T ,Havells ,C&S (or) equivalent approved make Nos. 20 2095 14.05% 1836.91 36738.27 6612.89

F.3 2.15 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.(For D type Quater ) 0.00 0.00

2.15.2 998736 18% 40 amps (30mA residual current,Short ckt 10kA,Test button IS12640 Part-1 ) of L&T ,Havells ,C&S (or) equivalent approved make Nos. 1 2626 14.05% 2302.50 2302.50 414.45

F.4 2.13 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. In the existing DB (For D type Quarter only) 0.00 0.00

F.5 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C”curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections,testing and commissioning etc. as required. 0.00 0.00

1 Pole MCBs Type-C of following rating,10KA Short circuit rating installed in the outgoing above SDBs as per single line / power schematic diagram. 0.00 0.00

Cat no. NC 106N/110N/116N/120N/132N make L&T ,Havells ,C&S (or) equivalent approved make 0.00 0.00

G EARTHING STATION, EARTHING CONDUCTOR, G.I. Plate & GI Pipe :- 0.00 0.00

Supply, laying, installation,connecting,testing & commissioning of following earthing station, earthing conductor for difference purposes as specified in the technical specification & as per IS:3043 :- 0.00 0.00

G.1 5.11 998736 18% Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.pipe(Class-B) from earth electrode including connection with G.I. nut,bolt, spring, washer excavation and re-filling etc. as required mtrs. 50 483 14.05% 423.50 21174.92 3811.49

G.2 5.4 998736 18% Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Set 6 6216 14.05% 5450.24 32701.45 5886.26

Total of Schedule Items as per DSR'18 Rates (Schedule III) ₹ 2,228,337.57 ₹ 401,100.76

Add percentage (%) above/below +/- on DSR 2018 Rates (to be quoted by contractor) 0.00%

Amount above/below +/- on the amount for DSR Items as per quoted percentage ₹ 0.00 ₹ 0.00

Total of Schedule Items (Schedule-III) ₹ 2,228,337.57

Total Tax ₹ 401,100.76

# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

Date : Printed Name :

Place : Designation :

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Supply & Installation Charges- Non-Schedule Electrical Items for CONSTRUCTION OF RESIDENTIAL QUARTERS AT BHUJ SUBSTATION

Sl. No. Activity Header / Substation Name SAC Whether SAC in column ‘3’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘5’ is confirmed. If not indicate applicable rate of GST # Description (Non Schedule tems) Unit Quantity Unit Erection Charges Total Erection Charges Total Tax GST

(Service Accounting Codes)

PART -D (QTRS) : Non - Schedule Items (Electrical)

1 Bhuj S/s 995461 18% NS-01 -Sub Distribution Board-SDB (Single phase distribution board with RCCB as Incomer & Single pole MCB as Outgoing ) :- Supplying and fixing following way prewired SP&N & TPN MCB distributionboard of CRCA steel sheet of not less than 1 mm thick for 240 volts on recess completewith loose wire box, terminal connectors for all incoming andoutgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks,Fully shielded tinned copperbus bar, neutral link, earth bar, detachable din bar, detachable gland plate,interconnections, powder painted including earthing etc. asrequired. (But without MCB/ RCCB/ Isolator)8+24 way, Double door (Havells Pearl Ivory double door Cat DHDPTHODPW08 or Equivalent approved make) with Three nos phase indication lamp of Havells Cat Red DHMCYSPX000 , Amber DHMCXSPX000 and Blue DHMCVSPX000 for D type Quarter Nos. 1 0.00 0.00

2 Bhuj S/s 998731 18% NS-02-Telephone & TV Box Supplying,delivery,testing at site and installation of 20 pair telephone MDF of approved ITI make consisting of tag blocks in 2 nos of 10 pair krone, disconnector type, complete with metal enclosure powder coated, krone tag block mounting arrangement, telephone distribution chart and locking arrangement with duplicate key to be supplied (for EPABX / Direct BSNL lines). Set 6 0.00 0.00

3 Bhuj S/s 998731 18% NS-03-Telephone & TV Box Supplying, delivery, testing , installation of CRCA junction box (with red oxide paint & two coats of enamel paint of approved shade ) of size 250 X 250 X 150 mm surface on wall or recessed or semi recessed at suitable location for mounting the TV amplifier and TV splitter as per direction of engg-in-charge. Set 6 0.00 0.00

4 Bhuj S/s 995461 18% NS-04-Main Incoming Panel Supplying, delivery,erecting, testing and commissioning of Main Incoming Panel made of CRCA sheet of 14 gauge (2mm) of size 1.2m(H) x 1m(W) x 0.3m (D) with double door provision having hinged front door of suitable size including cutting, bending, welding,drilling, rivetting,etc and Powder Coated. with suitable mounting arrangement mounted on angle iron frame of size 35X35X5mm to be mounted in staircase area at ground floor at suitable location as per site condition, as per direction of engg-in-charge suitable for housing seperately the following items. The front door shall have self locking arrangement with weather & water proof neoprene good quality gasket and the MDB should have the provision of suitable dia holes for incoming and outgoing cables complete as required as per technical specification :- 5 0.00 0.00

a) 1 no. of Triple pole iron clad/metal clad of 415/500V, 100A rating with neutral link SDF model of approved L&T / Havells /Schnider make to be erected as incomer SFU.

b) Required Busbar having 4 nos. of 100A rating of size 25x5mm Al. busbar mounted in support insulator as per technical specification, single line diagram inside the Main incomer panel with suitable mounting arrangement.

c) 3 nos. of LED type R, Y & B phase Indication lamp in incomer side of L&T make or eqvnt. approved make.

d) 5 nos. of three phase change over switches for switching of phases in case of any phase failure of 415/500V, 40A rating of HCL Elektra V3N32A 3 Way with off or eqvnt. approved make to be erected as outgoing unit.

Complete with necessary inter connection between TPN SFU, incoming cable, Requied size busbar, Phase change over switch, all mounted inside the Main incoming panel in phase segregated manner ,duly wired with and tested as per the Single line diagram with required size of PVC copper wires, required terminal connectors etc., as per requirement, technical specification, site condition and direction of engg-in-charge complete in all respect.

5 Bhuj S/s 995461 18% NS-05-Supply,delivery, installation, testing & commissioning of 2 Pole ISOLATOR,40A rating installed in the outgoing above SDBs as per single line / power schematic diagram. Havells Cat.No. DHMIOPDX040 or equivalent approved make (5 Nos for each panel in a Block including for common area Ckt.) Nos 25 0.00 0.00

6 Bhuj S/s 995461 18% NS-06- Supplying,delivery, erecting, testing & commissioning of AC Static Watthour meter of 10-40A range suitable for measurement of energy (KWH) in 1 - phase, 2 wire. load conforming to IS:13779 of latest edition; CBIP publication and as per technical specification complete erected / mounted inside the above provided Meter box panel with suitable mounting accessories including wiring with required size of weather proof Cu PVC multistrand wire duly tested for class I accuracy in an approved manner, as per direction of engg-in-charge. (5 Nos for each panel in a Block including for common area lighting ) (Note :- The Meter should be of L&T / Havells / Secure make, Respective test certificate / calibration certificate to be submitted which is prerequisite.) Nos 25 0.00 0.00

7 Bhuj S/s 995461 18% NS-07-Supplying,erecting, testing & commissioning of AC Static Watthour meter of 5-40A range suitable for measurement of energy (KWH) in 3 - phase, 4 wire load conforming to IS:13779 of latest edition; CBIP publication and as per technical specification complete erected on polished TW board/ metal plate mounted in suitable size weather proof FRP box made of 2.7mm thick permanent grey colour along with ELMEX make terminal connectors having locking arrangement with lock and key and suitable visual indicator plastic sheet for mounting the energy meter including wiring from DB / SFU Unit to meters with required size of weather proof Cu PVC multistrand wire duly tested for class I accuracy in an approved manner, as per direction of engg-in-charge.(Note :- The meter should be of L&T / Havells / Secure make, Respective test certificate / calibration certificate to be submitted which is prerequisite.) Nos 1 0.00 0.00

8 Bhuj S/s 995461 18% NS-08- Supply and installation of Ceiling light surface mounted 33W LED luminaire with min of 100lumens/Watt complete with diffuser ABS housing and lamp having minimum two years warranty for Living/drawing room area as per drawing, civil layout, site condition and direction of engg-in-charge. Wipro Immaculate cat. no. CRCO10S036HP57 or equivalent Philips/Syska/crompton or other approved make DECORATIVE CEILING LIGHT CH Nos 22 0.00 0.00

9 Bhuj S/s 995461 18% NS-09-Supply and installation of Decorative moulded body, round, ceiling mounted fixture having CRI ≥ 70 with electronic driver and 10W LED lamp having over 35000 burning hours and minimum 2 years warranty. high grade ABS housing, UV stabilised diffuser for glare free light. Finish: Matt finish white matching ABS body. The power factor is to be grater than 0.5. Pre-wired with 230V rated and suitable for 1.5 sqmm wire connection ready to use Havells Luna-4Pin Cat LHEAAIP7UL1W010 or equivalent of approved make SPOT LIGHT SL Nos 104 0.00 0.00

10 Bhuj S/s 995461 18% NS-10-Supply and installation of Decorative square moulded body, ceiling mounted fixture having CRI ≥ 70 with 8W LED lamp having life over 30000 burning hours and minimum 2 years warranty. Housing Made up of high grade ABS, UV stabilized diffuser for glare free light.Finish with matching ABS body The power factor is to be greater than 0.5. .Lamp holders :Pre-wired with 230V rated and pre-fitted with lamp suitable for 1.5 sqmm wire connection ready to use.Havells Matrix-4Pin Cat LHEAAJP7UL1W008 or equivalent Philips/Syska/Crompton/Wipro and other approved make SPOT LIGHT SLB Nos 60 0.00 0.00

11 Bhuj S/s 995461 18% NS-11-Supplying,delivery,erecting, testing and commissioning of environment friendly energy efficient sleek energy saver luminaire of 18W LED light fixture having life over 30000 burning hours and minimum two years waranty with Housing Made up of ultra slim extruded aluminium, powder coated with white finish. white coloured ABS end caps provided and with high quality diffuser for glare free light. Pre-wired with 230V having in-built driver pre-fitted with lamp having high efficacy of greater than or equal to 70 lm/W with specially designed warm start with lamp of 18W having power factor ≥ 0.90 along with other accessories connected with necessary 1.5 sq.mm flexible wire as required as per interior layout, site condition and direction of engg-in-charge. Havells E-Lite Cat LHEXBLP7IN1W018 or equivalent Philips/Syska/Wipro and other approved make TUBE LIGHT TL Nos 130 0.00 0.00

12 Bhuj S/s 995461 18% NS-12-Supplying,delivery,erecting, testing and commissioning of Asthetically designed circular shaped decorative wall/ ceiling light fixture suitable for 12W LED fixture with minimum two years warranty having life over 35000 burning hours including electronic driver with ABS Housing Made up of high quality, high temperature resistantABS. Reflector made up of high quality, high temperature resistant polycarbonate in white colour.Cover,Circular shape made up of high quality, high temperature resistant polycarbonate in black colour, fixed to the housing with 4 nos. self tapping screws provided with the fixture.Diffuser in opal matt finish for soothing light effect with no UV and IR radiations and CRI to be greater than or equal to 75. Havells KORONA 2 Cat LHEHCFP7UL6K012 or equivalent of approved make PERIPHERAL LIGHT -BL Nos. 31 0.00 0.00

13 Bhuj S/s 995461 18% NS-13 Supplying,delivery,erecting, testing and commissioning of asthetically designed decorative wall mounting fixture along with suitable 9W retrofit LED lamp having minimum two years warranty. Specification Housing Made up of high grade CRCA steel sheet, epoxy powder coated white after phosphochromate treatment.Reflector Made up of high purity pre anodised aluminium sheet.Diffuser Thermoformed methacrylate, UV stabilised, heat resistant acrylic cover in parabolic shape, opal finish for glare control and soothing light effect to create proper ambience.Lamp holder B22 lamp holder in engineering plastic grade provided as standard.Electric gear Pre-wired upto terminal block for CFL operation. Havells Beetle Cat LHDL07150099 or equivalent Philips/Wipro/Syska and other approved make drawing, site condition and direction of engg-in-charge. BRAKET LIGHT TYPE- BL Nos. 110 0.00 0.00

14 Bhuj S/s 995461 18% NS-14 Supply delivery,testing and erecting 6 Watt LED Mirror Light fixture with minimum two years warranty having lumens ≥540, CRI ≥80 – Syska Make SSK-T5-6W or equivalent Philips/Wipro/Crompton and other approved make. MIRROR LIGHT - ML Nos. 53 0.00 0.00

15 Bhuj S/s 995461 18% NS-15-Supplying, erecting, testing and commissioning of high speed 48" (1200mm sweep) , 400 RPM , Air Delivery 230 CMM ,double ball bearing ceiling fan with condenser A.C. 230V, 50 cycles with canopy, down rod upto 300mm length with rubber bushing, bolts & nuts in the provided fan hook box of required size complete erected of Havells Velocity HS model or equivalent reputed approved make of (or) crompton (or) Usha (or) Bajaj make. Nos. 105 0.00 0.00

16 Bhuj S/s 995461 18% NS-16-Supplying, delivery,erecting, testing and commissioning of exhaust fan of 1200 RPM of 250mm size Air Delivery 860 CMH Made of High quality engineering plastic resistant to colour change with anti static properety with bracket blades complete for light duty suitable for operate 230V 50Hz, AC supply. with cawl for using in Kitchen Havells Ventilair DX model or equivalent approved make of (or) crompton (or) Usha (or) Bajaj make. Nos. 21 0.00 0.00

17 Bhuj S/s 995461 18% NS-17-Supplying, delivery,erecting, testing and commissioning of exhaust fan of 1280 RPM of 200mm size Air Delivery 520 CMH Made of High quality engineering plastic resistant to colour change with anti static properety with bracket blades complete for light duty suitable for operate 230V 50Hz, AC supply. with cawl for using in Kitchen Havells Ventilair DX model or equivalent approved make of (or) crompton (or) Usha (or) Bajaj make. Nos. 44 0.00 0.00

Total of Schedule 3D ₹ 0.00 ₹ 0.00

# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

Date : Printed Name :

Place : Designation :

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Installation Charges- Schedule Items for CONSTRUCTION OF TRANSIT CAMP AT BHUJ SUBSTATION

Sl. No. SAC Whether SAC in column ‘3’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘5’ is confirmed. If not indicate applicable rate of GST # Description (DSR'18 Items- Civil Works) Unit Quantity Unit Erection Charges Deduction of GST factor considered in DSR Unit Erection Charges excluding GST Total Erection Charges excl GST Total Tax GST Total Erection Charges incl. GST

(Service Accounting Codes)

PART - E (TC) : Schedule Items (Civil) as per DSR 2018

1 995428 18% 1.1 Carriage of materials by mechanical transport including loading, unloading and stacking 1.1.2 EARTH upto 1.00 km. CuM 20.00 131.17 0.0000 131.17 2623.40 472.21 3095.612

2 995433 18% 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soil CuM 110.00 181.85 0.1405 159.45 17539.24 3157.06 20696.300

3 995433 18% 2.8 Earth work in excavtion by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 mtr. In width or 10 sqm on plan) including dressing of sides and ramming of bottoms lift up to 1.5 mtr. Including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 mtr. 2.8.1 All kind of soil CuM 610.00 252.30 0.1405 221.22 134943.45 24289.82 159233.266

4 995433 18% 2.10 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc and disposing of the suplus excavated soil as directed, within a lead of 50m: 2.10.1 All kinds of soil. 2.10.1.2 Pipes, cables etc exceeding 80 mm dia but not exceeding 300mm dia Mtrs 50.00 364.20 0.1405 319.33 15966.68 2874.00 18840.684

5 995433 18% 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides, of the foundation etc. in layers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering, lead upto 50 mtrs and lift upto 1.5 mtrs. Cu.m. 711.00 219.65 0.1405 192.59 136932.18 24647.79 161579.971

6 995433 18% 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials. 2.26 1 All kinds of Soil Cu.m. 320.00 90.40 0.1405 79.26 25364.31 4565.58 29929.890

7 995433 18% 2.34 Supplying chemical emulsion in sealed containers including delivery as specified 2.34.1 Chloropyriphos/Lindane emulsifiable concentrate of 20% Ltrs. 145.00 200.85 0.1405 176.11 25535.51 4596.39 30131.903

8 995454 18% 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering : All works upto plinth level. 4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) CuM 9.50 5789.60 0.1405 5076.37 48225.52 8680.59 56906.108

9 995454 18% 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor,etc., up to floor five level, excluding the cost of centering,shuttering and finishing : 4.2.3 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) Cum 2.50 8554.50 0.1405 7500.66 18751.64 3375.30 22126.940

10 995457 18% 4.3 Centering and shuttering including strutting, propping etc. and removalof form work for : 4.3.1 Foundations, footings, bases for columns SqM 30.00 284.85 0.1405 249.76 7492.77 1348.70 8841.464

11 995454 18% 4.10 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). SqM 31.50 347.90 0.1405 305.04 9608.81 1729.59 11338.398

12 995454 18% 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. per 50 kg cement 8.00 56.55 0.1405 49.58 396.67 71.40 468.068

13 995454 18% 4.13 Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. SqM 31.30 110.00 0.1405 96.45 3018.85 543.39 3562.245

14 995454 18% 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. SqM 50.00 614.05 0.1405 538.40 26920.21 4845.64 31765.848

15 995457 18% 5.9 Centring and shuttering including strutting propping etc. and removal of form for : 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. SqM 46.00 284.85 0.1405 249.76 11488.91 2068.00 13556.912

16 995457 18% 5.9.2 Walls (any thickness) including attached pilasters, buttresses, plinth & string courses etc. SqM 51.00 609.30 0.1405 534.24 27246.21 4904.32 32150.525

17 995457 18% 5.9.3 Suspended floors, roofs, landings, balconies and access platform SqM 366.50 693.05 0.1405 607.67 222711.81 40088.13 262799.942

18 995457 18% 5.9.5 Lintels, beams, plinth beams, girders, bressumers & cantilevers SqM 490.00 552.05 0.1405 484.04 237180.62 42692.51 279873.135

19 995457 18% 5.9.6 Columns, pillars, piers abutments posts & struts SqM 322.00 733.70 0.1405 643.31 207147.22 37286.50 244433.715

20 995457 18% 5.9.7 Stairs (excluding landings) except spiral staircases. SqM 25.00 622.35 0.1405 545.68 13642.04 2455.57 16097.611

21 995457 18% 5.9.13 Vertical and horizontal fins individually or forming box louvers,bands,facias,and eaves boards. SqM 26.00 1023.55 0.1405 897.46 23333.89 4200.10 27533.989

22 995457 18% 5.9.15 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like SqM 16.50 284.85 0.1405 249.76 4121.02 741.78 4862.805

24 995457 18% 5.9.19 Weather shade, chajjas, corbels etc. including edges. SqM 35.00 766.75 0.1405 672.29 23530.25 4235.44 27765.695

25 995454 18% 5.11 Extra for additional height in centring &, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels over a height of 3.5 m for every additional height of 1m or part thereof (Plan area to be measured) 5.11.1 Suspended floors, roofs, landings, beams and balconies (Plan area to be measured) SqM 12.00 287.50 0.1405 252.08 3024.99 544.50 3569.487

26 995454 18% 5.22 Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in postion and binding all complete up to plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kgs 8600.00 83.50 0.1405 73.21 629636.12 113334.50 742970.627

27 995454 18% 5.22A Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in postion and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kgs 14610.00 83.50 0.1405 73.21 1069649.28 192536.87 1262186.146

28 995478 18% 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Mtrs 66.00 58.90 0.1405 51.64 3408.51 613.53 4022.036

29 5.33 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). 0.00

B) 995454 18% 5.33.2 All works above plinth level upto floor V level CuM 115.00 9400.85 0.1405 8242.74 947915.61 170624.81 1118540.416

30 995454 18% 5.35 Add for using extra cement in the items of design mix over and above the specified cement content therein. Quintals 95.00 673.30 0.1405 590.36 56083.74 10095.07 66178.808

31 995456 18% 6.1 Brick work with common burnt clay F .P .S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) CuM 20.00 6157.45 0.1405 5398.90 107978.08 19436.05 127414.134

32 995456 18% 6.13 Half brick masonry with common burnt clay F .P .S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SqM 165.00 932.10 0.1405 817.27 134850.07 24273.01 159123.078

33 995456 18% 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry . SqM 165.00 80.10 0.1405 70.23 11588.34 2085.90 13674.239

34 995456 18% (7008 - 2602) Extra for using F .P .S. (non modular) clay fly ash bricks class designation 7.5 instead of Common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1000 Nos 17.00 300.00 0.1405 263.04 4471.72 804.91 5276.633

35 995456 18% 6.32 Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : 6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 100.00 7752.90 0.1405 6797.81 679780.80 122360.54 802141.342

36 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 8.2.1 Rajnagar plain White marble/Udaipur green marble/Zebra black marble 0.00

37 8.2.2 Granite of any colour and shade 0.00

38 995474 18% 8.4 Extra for fixing marble /granite stone, over and above corresponding basic,item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. Mtrs 6.70 434.25 0.1405 380.75 2551.05 459.19 3010.242

39 995474 18% 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Each 7.00 734.55 0.1405 644.06 4508.42 811.52 5319.932

40 995474 18% 8.9 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8.9.1 8mm thick 8.9.1.2 Granite of any colour and shade SqM 40.00 2926.85 0.1405 2566.29 102651.47 18477.26 121128.733

41 995476 18% 9.1 Providing wood works in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length(hold fast lugs or dash fastners shall be paid seperately.) 9.1.1 Second class teak wood CuM 0.35 130183.05 0.1405 114145.59 39950.96 7191.17 47142.130

42 995476 18% 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws SqM 23.00 3023.95 0.1405 2651.42 60982.77 10976.90 71959.669

43 995476 18% 9.21 Providing & fixing ISI marked flush doors shutters conforming to IS 2202 (Part-1) non decorative type, core of block board construction with frame of Ist class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands & face veneers on both faces of shutters : 9.21.1 35 mm thick including ISI marked Stainless steel butt hinges with necessary screws. SqM 12.00 1886.70 0.1405 1654.27 19851.29 3573.23 23424.526

44 995476 18% 9.31 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, as per directions of Engineer-in-charge: 9.31.2 30 mm thick shutters SqM 5.99 2382.40 0.1405 2088.91 12512.56 2252.26 14764.822

45 995476 18% 9.46 Providning and fixing curtain rods of 1.25 mm thick chromium plated brass plate,with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs etc, wherever necessary complete: 9.46.3 25 mm dia. Mtrs 41.65 480.15 0.1405 421.00 17534.63 3156.23 20690.865

46 995476 18% 9.87 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : 9.87.1 150 mm Each 8.00 118.10 0.1405 103.55 828.41 149.11 977.522

47 995476 18% 9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 2.00 806.45 0.1405 707.10 1414.20 254.56 1668.761

48 995476 18% 9.90 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. 9.90.2 50 mm Each 10.00 271.25 0.1405 237.83 2378.34 428.10 2806.445

49 995476 18% 9.91 Providing and fixing chromium plated brass 50mm cupboard or wardrobe knob with nuts complete; Each 10.00 121.60 0.1405 106.62 1066.20 191.92 1258.115

50 995476 18% 9.92 Providing and fixing chromium plated brass handles with necessary screws etc. complete: 9.92.2 100mm Each 20.00 198.85 0.1405 174.35 3487.07 627.67 4114.739

51 9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 0.00

52 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 0.00

53 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 0.00

54 9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour & shade with necessary screws etc. complete 0.00

55 9.114 Providing and fixing magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete. 0.00

56 995476 18% 9.115 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer in charge. One set 20.00 339.75 0.1405 297.90 5957.91 1072.42 7030.338

57 995476 18% 9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. Mtrs 40.00 391.65 0.1405 343.40 13736.08 2472.49 16208.575

58 995476 18% 9.124 Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge. 9.124.2 Decorative finish (both side wood grained finish) SqM 17.00 3162.65 0.1405 2773.04 47141.65 8485.50 55627.145

59 995476 18% 9.130 Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. 9.130.1 With decorative veneering on one side and commercial veneering on other side SqM 24.00 1647.95 0.1405 1444.94 34678.47 6242.13 40920.600

60 995476 18% 10.14 Providing and fixing pressed steel door frames conforming to IS:4351 manufactured from commercial mild steel of 1.60 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm or base ties of 1.60mm, pressed mild steel welded or rigidly fixed together by mechanical means, including MS pressed butt hinges 2.5mm thick with mortar guards lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of surface as directed by the engineer in charge. 10.14.1 Profile B 10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb Mtrs 41.00 417.60 0.1405 366.16 15012.36 2702.23 17714.588

61 995476 18% 10.14.2 Profile C 10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb Mtrs 6.00 444.35 0.1405 389.61 2337.66 420.78 2758.438

62 995476 18% 10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 11.00 172.25 0.1405 151.03 1661.33 299.04 1960.373

63 995476 18% 10.25 Steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required 10.25.2 In gratings, frames, guard bars, ladders, railings, brackets, gates and similar works. Kgs 15.00 131.00 0.1405 114.86 1722.93 310.13 2033.056

64 995477 18% 10.26 Providing and fixing hand rail of approved size by welding etc. to steel ladder raling balcony raling , stair case raling and similar works including applying a priming coat of approved steel primier. 10.26.1 M.S. Tube Kgs 192.00 145.65 0.1405 127.71 24519.77 4413.56 28933.331

65 995476 18% 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Kgs 185.00 575.45 0.1405 504.56 93343.49 16801.83 110145.318

66 995474 18% 11.23 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : 11.23.5 Udaipur green marble SqM 34.00 1991.50 0.1405 1746.16 59369.57 10686.52 70056.098

67 995474 18% 11.24 Extra for pre finished nosing to treads of steps of marble stone. Mtrs 54.00 530.25 0.1405 464.93 25106.09 4519.10 29625.191

68 995474 18% 11.25 Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre . SqM 20.00 622.75 0.1405 546.03 10920.65 1965.72 12886.366

69 995474 18% 8.31 (11.36) Providing and Fixing 1st quality ceramic glazed wall tiles conforming to IS 15622(thickness to bespecified by the manufacturer) of approved make in all colours, shades except burgundy, bottle-green, black of any size as approved by the Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement mortar 1:3 (1 Cement:3 Coarse Sand) and jointing with grey cement slurry @ 3.3 kg per sq m including pointing in white cement mixed with pigment of matching shade complete. SqM 135.00 1030.30 0.1405 903.38 121955.72 21952.03 143907.751

70 995474 18% 11.40 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory , Grey , Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. SqM 31.00 1170.70 0.1405 1026.48 31820.87 5727.76 37548.624

71 995474 18% 11.41 Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. 11.41.2 Size of tile 600 X 600 mm SqM 251.00 1500.55 0.1405 1315.69 330239.41 59443.09 389682.507

72 995474 18% 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. 11.46.2 Size of Tile 600x600 mm SqM 39.00 1545.85 0.1405 1355.41 52861.16 9515.01 62376.166

73 995474 18% 11.48 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge. 11.48.2 Size of Tile 600x600 mm SqM 290.00 241.45 0.1405 211.71 61394.56 11051.02 72445.585

74 995474 18% 11.50 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. SqM 290.00 -11.00 0.1405 -9.64 -2797 -503 -3300.482

75 995453 18% 12.21 Providing gola 75 X 75 mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1: 3 ( 1 cement : 3 fine sand) as per standard design: 12.21.1 In 75 X 75 mm deep chase Mtrs 120.00 237.25 0.1405 208.02 24962.74 4493.29 29456.028

76 995453 18% 12.22 Making khurras 45 x 45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. Each 9.00 244.05 0.1405 213.99 1925.87 346.66 2272.522

77 995453 18% 12.41 Providing and fixing on wall face unplasticised -Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 12.41.2 110 mm diameter Mtrs 45.00 305.05 0.1405 267.47 12036.17 2166.51 14202.679

78 995453 18% 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.42.1 Coupler 12.42.1.2 110 mm Each 21.00 117.80 0.1405 103.29 2169.05 390.43 2559.477

82 995453 18% 12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised -PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 12.43.2 110 mm Each 26.00 288.80 0.1405 253.22 6583.78 1185.08 7768.859

83 995453 18% 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams. Each 9.00 47.25 0.1405 41.43 372.86 67.12 439.978

85 12.52 Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to 0.00

center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to 0.00

ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 0.00

995453 18% 12.52.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. SqM 62.50 1880.95 0.1405 1649.23 103077.05 18553.87 121630.918

87 995472 18% 13.5 15 mm cement plaster on rough side of single or half brick masonry wall of mix : 13.5.2 1:6 ( 1 cement : 6 coarse sand) SqM 688.00 303.90 0.1405 266.46 183325.91 32998.66 216324.573

88 995472 18% 13.9 Cement plaster 1:3 ( 1cement : 3 coarse sand) finished with a floating coat of neat cement : 13.9.1 12 mm cement plaster SqM 20.00 350.15 0.1405 307.01 6140.29 1105.25 7245.541

89 995472 18% 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 Cement : 5 Coarse sand) finished with top layer 6 mm thick cement plaster 1:6 (1 Cement : 6 Fine sand) SqM 550.00 399.30 0.1405 350.11 192560.28 34660.85 227221.131

91 995472 18% 13.24 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: 13.24.2 In two coats SqM 10.00 878.40 0.1405 770.19 7701.89 1386.34 9088.224

92 995472 18% 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. SqM 1304.00 196.70 0.1405 172.47 224898.55 40481.74 265380.293

93 995473 18% 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) SqM 520.00 161.15 0.1405 141.30 73474.79 13225.46 86700.254

94 995473 18% 13.68 French spirit polishing : 13.68.1 Two or more coats on new works including a coat of wood filler. SqM 6.00 351.15 0.1405 307.89 1847.35 332.52 2179.870

95 995473 18% 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.83.2 Two coats SqM 1305.00 113.90 0.1405 99.87 130328.36 23459.11 153787.470

96 995473 18% 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work SqM 5.00 121.55 0.1405 106.58 532.88 95.92 628.799

97 13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 0.00

A) 995473 18% 13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre SqM 6.00 57.05 0.1405 50.02 300.13 54.02 354.155

B) 995473 18% 13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre SqM 1305.00 60.00 0.1405 52.61 68654.10 12357.74 81011.837

98 995428 18% 16.91 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator , filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per anufacturer's specifications & direction of Engineerin-Charge. 16.91.1 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern. SqM 76.00 884.75 0.1405 775.76 58957.47 10612.35 69569.820

99 995478 18% 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P . Brass pillar taps, 32 mm C.P . brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P . brass pillar taps Each 3.00 2846.90 0.1405 2496.19 7488.56 1347.94 8836.498

100 995478 18% 17.10 Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per IS:13983 with CI brackets and stainless steel plug 40 mm, including painting of fittings & brackets cutting and making good the walls wherever required 17.10.1 Kitchen sink with drain board 17.10.1.4 Size 510 x 1040 bowl depth 178 mm Each 1.00 5182.70 0.1405 4544.23 4544.23 817.96 5362.197

101 995478 18% 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin-charge. Each 3.00 883.05 0.1405 774.27 2322.80 418.10 2740.900

102 995478 18% 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia Each 8.00 6113.60 0.1405 5360.46 42883.65 7719.06 50602.704

(i) 995478 18% 17.28 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete 17.28.1 Semi Rigid pipe 17.28.1.1 32 mm dia Each 1.00 87.70 0.1405 76.90 76.90 13.84 90.737

103 995478 18% 17.30 Providing and fixing in position 25 mm diameter mosquito proof coupling of approved muncipal design Each 10.00 45.00 0.1405 39.46 394.56 71.02 465.585

104 995478 18% 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 3.00 1283.05 0.1405 1124.99 3374.97 607.49 3982.461

105 995478 18% 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P . Brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 3.00 841.80 0.1405 738.10 2214.29 398.57 2612.865

106 995478 18% 17.34 Providing and fixing toilet paper holder : 17.34.1 C.P. brass Each 8.00 583.75 0.1405 511.84 4094.70 737.05 4831.740

107 995478 18% 17.69 Providing and fixing PTMT Waste Coupling for wash basin and sink,of approved quality and colour. 17.69.2 Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms Each 1.00 118.50 0.1405 103.90 103.90 18.70 122.604

108 995478 18% 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 3.00 158.55 0.1405 139.02 417.05 75.07 492.124

109 995478 18% 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour , weighing not less than 88 gms. Each 3.00 228.20 0.1405 200.09 600.26 108.05 708.310

110 995478 18% 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. Each 3.00 595.50 0.1405 522.14 1566.42 281.96 1848.374

111 995478 18% 17.78 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover , and cistern fittings, nuts, bolts and gasket etc complete. Each 8.00 13852.45 0.1405 12145.94 97167.56 17490.16 114657.719

112 18.10 Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls etc. Internal work exposed on wall 0.00

113 18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :

114 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 0.00

115 995424 18% 18.13 Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc complete 18.13.2 50 to 80 mm nominal bore Each 2.00 1432.75 0.1405 1256.25 2512.49 452.25 2964.744

116 18.17 Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end) 0.00

117 995424 18% 18.18 Providing and fixing ball valve (brass) of approved quality High or low pressure with plastic floats complete. 18.18.3 25 mm nominal bore Each 3.00 394.00 0.1405 345.46 1036.39 186.55 1222.937

118 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end) 18.19.3 40 mm nominal bore 0.00

119 18.19.4 50 mm nominal bore 0.00

120 995424 18% 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions : 18.21.2 45 cm length 18.21.2.1 15 mm nominal bore Each 28.00 83.00 0.1405 72.78 2037.70 366.79 2404.489

121 995424 18% 18.22 Providing and fixing CP brass shower rose with 15 or 20 mm inlet. 18.22.1 100 mm diameter Each 3.00 151.90 0.1405 133.19 399.56 71.92 471.483

122 995424 18% 18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 2.00 1582.45 0.1405 1387.51 2775.01 499.50 3274.513

123 18.46 Providing & fixing GI union in GI Pipe including cutting and threading the pipe and making long screws etc. complete ( New work ) 0.00

124 995424 18% 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.48A Circular tank per litre 3000.00 8.80 0.1405 7.72 23147.74 4166.59 27314.336

125 995424 18% 18.49 Providing & fixing CP brass bib cock of approved quality conforming IS:8931. 18.49.1 15 mm nominal bore Each 8.00 418.95 0.1405 367.34 2938.71 528.97 3467.679

126 995424 18% 18.51 Providing & fixing CP brass long body bib cock of approved quality conforming IS standards and weighing not less than 690gms 18.51.1 15 mm nominal bore Each 12.00 552.35 0.1405 484.31 5811.66 1046.10 6857.761

127 995424 18% 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore Each 16.00 606.25 0.1405 531.57 8505.04 1530.91 10035.949

128 995424 18% 18.53 Providing & fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 18.53.1 15 mm nominal bore Each 36.00 532.00 0.1405 466.46 16792.63 3022.67 19815.309

129 995424 18% 18.58 Providing and fixing PTMT grating of approved quality and colour 18.58.2 Rectangular tupe with openable circular lid 18.58.2.1 150 mm nominal size square 100mm diametre of the inner hinged round grating Each 18.00 169.00 0.1405 148.18 2667.25 480.11 3147.356

130 995424 18% 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Each 3.00 130.50 0.1405 114.42 343.27 61.79 405.059

131 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 0.00

132 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)all around SW pipes including bed concrete as per standard design. 0.00

133 995424 18% 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 19.4.3 180x150 mm size P type 19.4.3.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 5.00 2409.60 0.1405 2112.76 10563.79 1901.48 12465.270

134 995424 18% 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 19.7.1 Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total wt. of cover and frame to be not less than 38 kg. (wt. of the cover 23 kg and wt. of the frame 15 kg.) 19.7.1.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 11.00 10905.05 0.1405 9561.64 105178.04 18932.05 124110.082

135 995424 18% 19.8 Extra for depth for manholes 19.8.1 Size 90 x 80 cm 19.8.1.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Meter 5.50 7503.00 0.1405 6578.69 36182.81 6512.91 42695.721

136 995476 18% 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Kg 650.00 464.70 0.1405 407.45 264844.37 47671.99 312516.352

137 995476 18% 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Kg 280.00 554.95 0.1405 486.58 136243.75 24523.88 160767.628

138 21.3 Providing and fixing glazing in aluminium door, window,ventilator,shutter and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectual drawings and the directions of Engineer in charge(Cost of aluminium snap beading shall be paid in basic item) 0.00

139 995476 18% 21.4 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 21.4.1 With stainless steel cover plate minimum 1.25 mm thickness Each 2.00 2412.50 0.1405 2115.30 4230.60 761.51 4992.109

140 995476 18% 21.8 Filling the gap in between aluminium frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in Charge complete. 21.8.1 Up to 5mm depth and 5mm width Meter 127.00 79.45 0.1405 69.66 8847.13 1592.48 10439.612

141 995476 18% 21.11 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineerin-charge complete. 21.11.2 255 X 19 mm Each 26.00 322.65 0.1405 282.90 7355.46 1323.98 8679.441

142 995476 18% 21.13 Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Each 1.00 458.55 0.1405 402.06 402.06 72.37 474.431

143 995476 18% 21.15 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. 21.15.3 Polyester powder coated minimum thickness 50 micron aluminium Each 72.00 70.25 0.1405 61.60 4434.90 798.28 5233.178

144 995453 18% 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry . SqM 50.00 465.60 0.1405 408.24 20412.10 3674.18 24086.278

145 22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies terraces etc. consisting of following operations. (a) Applying a slurry coat of neat cement using 2.75Kg/sq.m. of cement admixed with water proofing compound conforming to IS:2645 and approved by Engneer in charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. 0.00

(b)Laying brick bats with mortar using broken bricks/brick bats 25mm to 1115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer in charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer in charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of the junctions of walls and slabs. 0.00

(c )After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sq.m. of cement admixed with water proofing compound conforming to IS:2645 and approved by the Engineer in charge. 0.00

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. 0.00

995453 18% (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order & as directed and specified by the Engineer-in-charge. 22.7.1 With average thickness of 120 mm and minimum thickness at Khurra as 65mm SqM 213.00 1398.50 0.1405 1226.22 261184.13 47013.14 308197.273

Total of Schedule Items as per DSR'18 Rates (Schedule 3E) ₹ 9,392,262.36 ₹ 1,690,607.23 ₹ 11,082,869.59

Add percentage (%) above/below +/- on DSR 2016 Rates (to be quoted by contractor) 0.00%

Add Amount above/below +/- on the amount for DSR Items as per quoted percentage ₹ 0.00 ₹ 0.00

Total of Schedule Items (Schedule - 3E ₹ 9,392,262.36

# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

Date : Printed Name :

Place : Designation :

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Installation Charges- Non-Schedule Items for CONSTRUCTION OF TRANSIT CAMP AT BHUJ SUBSTATION

Sl. No. Activity Header / Substation Name SAC Whether SAC in column ‘3’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘5’ is confirmed. If not indicate applicable rate of GST # Description (DSR'16 Items- Civil Works) Unit Quantity Unit Erection Charges Total Erection Charges Total Tax GST

(Service Accounting Codes)

PART - F (TC) : Non - Schedule Items (Civil)

1 Bhuj S/s 995433 18% NS-01 Supply and filling of good quality moorum under floor in layers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering, consolidating and dressing complete. ( Measurement shall be based on compacted volume ) CuM 84.00 0.00 0.00

2 Bhuj S/s 995433 18% NS-02 Diluting & injecting chemical emulsion ecluding of the cost of the chemical emulsion) for PRE-CONSTRUCTIONAL ANTI TERMITE treatment and creating a continuos chemical barrier under all round the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes, conduits etc. complete as per specifications. (Plinth area of the building at ground floor only shall be measured for payment) Chloropyriphos/Lindane emulsifiable concentrate of 20% SqM 200.00 0.00 0.00

3 Bhuj S/s 995411 18% NS-03 Providing and fixing rubber shock absorbers of minimum 25 mm dia and 40 mm length to be fixed on back side of door including screws and nuts etc. all complete. Each 22.00 0.00 0.00

4 Bhuj S/s 995428 18% NS-04 Providing and placing cinder/brick bat filling to the sunk floors in toilets/kitchen sunks, well compacted carefully by hand beating to required slopes including consolidation, curing, (mix shall be one part of cement mortar 4 parts of Cinder/brickbat finishing the same with the cement mortor 1:4 (1cement:4 coarse sand) by adding water proofing compound as per manufacturers recommendations including providing 25mm dia PVC drain pipe of required length. For toilet and Kitchen sunkun portions CuM 2.20 0.00 0.00

5 Bhuj S/s 995411 18% NS-05 Providing and fixing 25 to 35mm thick both side semi polished black kadappah stone slab in shelves, fixing in cement mortar 1:3 including necessary cutting and making good the walls, curing and cleaning complete. SqM 8.10 0.00 0.00

6 Bhuj S/s NS-06 Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592-1992 of PRICE/SUPREME/FINOLEX or equivalent make of working pressure 6kg/sq.cm for drainage line including necessary fittings such as couplers, bends, tees, cross tees, cowls, clamps, rubber packing ring etc. confirming to DIN 19561, DIN 19534, IS 14735-99, IS-5382, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose)

A Bhuj S/s 995428 18% A) 40mm outer dia. Metre 24.00 0.00 0.00

B Bhuj S/s 995416 18% B) 75mm outer dia. Metre 32.00 0.00 0.00

C Bhuj S/s 995478 18% C) 110mm outer dia. Metre 15.00 0.00 0.00

7 Bhuj S/s 995424 18% NS-07 Providing, fixing, testing and commissioning uPVC SWR Nahani trap, plain floor trap/ Multi floor trap with strainer/top cover etc. confirming to DIN 19531, DIN 19534, IS 14735-99, IS-5382 of 110 mm dia inlet and 75 mm outlet nominal dia. including fixing PVC reducer of 110mm dia. to 75 mm dia. and jointing with adhessive solvent cement including cost of cutting and making good the walls and floors at all levels etc. complete. Each 18.00 0.00 0.00

8 Bhuj S/s 995411 18% NS-08 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clrestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia. 0.50mm all complete. In sliding aluminium window shutter as well as ventilators Sq.m. 2.10 0.00 0.00

9 Bhuj S/s NS-09 Providing & fixing Hindware make or equivalent bathroom accessories including cutting wall/making holes and making good the surface with the same finish as directed by the Engineer in charge.

A Bhuj S/s 995424 18% A) CP brass high flow single lever concealed diverter with body and plate for bath and shower system equivalent to Kohler make K-72329IN-4FP-CP or Jaquar make FUS-CHR-29227 Each 3.00 0.00 0.00

B Bhuj S/s 995424 18% B) CP brass hand shower (Health faucet) for WC/EWC system equivalent to Jaquar make ALD-CHR-573 or Kohler make K-12925IN-CP Each 8.00 0.00 0.00

C Bhuj S/s 995424 18% C) CP Concealed flush valve 32 mm of make Jaquar FLV-CHR-1095 or equivalent make as approved complete. Each 5.00 0.00 0.00

10 Bhuj S/s 995472 18% NS-10 Forming groove of uniform size in the external plaster surface as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 20 mm wide and 6 mm deep groove Metre 640.00 0.00 0.00

11 Bhuj S/s 995478 18% NS-11 Providing and fixing C.P. brass towel ring of make kohler cat no- 17528T-CP or Jaquar Continental: ACN-CHR-1121N or equivalent make fixed with PVC cleats and brass screws including cutting and making good the walls wherever required complete as directed by Engineer-in-charge. Each 6.00 0.00 0.00

12 Bhuj S/s 995478 18% NS-12 Providing and Fixing Towel rack with single rail of make Jaquar -Cat No: AHS-CHR-1581 or ,kohler cat no- 17529T-CP or equivalent as approved with Rawl Plugs and brass screws complete as directed by Engineer-in-charge. Each 5.00 0.00 0.00

13 Bhuj S/s 995415 18% NS-13 Providing and fixing liquid soap dispenser horizontal /vertical matt finish with simple push lever of make Jaquar ACN-CHR-1137N or Kohler cat K -10712D-CP or equivalent as approved including cutting and making good the walls, wherever required complete as directed by Engineer-in-charge. Each 6.00 0.00 0.00

14 Bhuj S/s 995424 18% NS-14 Providing and Fixing C.P. brass Central Hole basin mixer without pop up waste system of make Jaquar Model: CON-CHR-167KNB or kohler cat no- 16027IN-4ND-CP or equivalent make as approved with 450mm long copper pipe and brass nuts including cutting and making good the walls wherever required complete as directed by Engineer-in-charge. Each 6.00 0.00 0.00

15 Bhuj S/s 995424 18% NS-15 Providing and Fixing Over head Rose shower with revolving joint (with body rotation), 115 mm long shower arm of make Jaquar Cat No: OHS-CHR-1989 or kohler cat no- 16356IN-A-CP or equivalent make as approved complete as directed by Engineer-in-charge Each 5.00 0.00 0.00

16 Bhuj S/s 995478 18% NS-16 Providing and Fixing Soap dish of make Jaquar Continental ACN-CHR-1131 N or kohler cat no- 17524T-CP or equivalent make as approved with PVC / Wooden plugs and screws including making good the walls wherever required complete as directed by Engineer-in-charge. Each 5.00 0.00 0.00

17 Bhuj S/s 995468 18% NS-17 Providing and fixing 6mm thick Clear mirror with bevelled edge on the wall over 6mm thick polycorbonate sheet with ss screw / stud, machine cut in required size, approved shade & colour etc. complete with all respect at all levels as directed by Engineer-in-charge. (Sample of Mirror shall be got approved from Engineer-in-Charge). Each 6.00 0.00 0.00

18 Bhuj S/s 995424 18% NS-18 Providing and Fixing 32mm CP Brass bottle trap complete with 250 mm long wall connecting pipe of Jaquar ALD-CHR-769 B or kohler cat no- 16407IN-CP or equivalent make as approved of size including CP Wall flange complete as directed by Engineer-in-charge. Each 6.00 0.00 0.00

19 Bhuj S/s 995424 18% NS-19 Providing and fixing white color vitreous China oval shape, under counter wash basin of make of Kohler cat. no. 2211 IN-O or jaquar FLS-WHT-0401 or equivalent as approved of 32mm dia outlet with CP Brass connection, Rubber adopter for waste connection and CI Brackets etc including cutting and making good the walls wherever required complete as per direction of engineer-in-charge. Each 6.00 0.00 0.00

20 Bhuj S/s 995411 18% NS-20 Supply and installation of Railing modular and component (Weld free) based system satin finish stainless steel AISI 304 ss handrail and balustrade system having 50mm and 38mm dia tube (app weight 1.5 kgs per Rmtr) handrail (1.5mm gauge) (70.6039.34.200/ 300) connected with unified stem keys (80.1000.34.104) in bead blasted finish to 12X54 mm satin finish solid flat vertical member (70.6030.34.040) erected with chemical grout having infill of 10 mm toughened glass complete with all necessary bends and terminations (height 1000 max) for Balcony railing. System as tested and recommended by BS certification of BS 6180: 1995 from British Standard Institute. 0.00 0.00 0.00

(Product of Q-railing India Pvt. Limited or OZONE Overseas Pvt Limited or equivalent as approved by the Engineer in charge) Metre 7.20 0.00 0.00

21 Bhuj S/s 995471 18% NS-21 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in alkuminium doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). SqM 3.90 0.00 0.00

22 Bhuj S/s 995424 18% NS-22 Providing 600mm long Glass shelf of Jaquar make Cat. No. ACN-CHR-1171N, Kohler make K-17520T or equivalent make including all accessories, fixing of shelf in position, making good the walls all complete as per the directions instructions of Engineer-in-Charge Nos 6.00 0.00 0.00

23 Bhuj S/s 995411 18% NS-23 Grouting of pressed steel door frames, profile B and Profile C with CC 1:2:4(1 cement:2 sand:4 gardeded agrregate 12.5mm nominal size) CuM 0.38 0.00 0.00

24 Bhuj S/s 995433 18% NS-24 Supply of earth(excluding rock and boulders) at site including royalty,carriage and filling in specified areas in layers not exceeding 200mm in depth,compacting under optimum moisture condition to achieve 95% of Proctor density,finishing etc. all complete, for all leads and lifts with all labour, material, tools, tackles, equipments, safeguards and incidentals as necessary as per drawings,specification and direction of the Engineer-in-charge. CuM 3000.00 0.00 0.00

Total of Schedule 3F ₹ 0.00 ₹ 0.00

# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

Date : Printed Name :

Place : Designation :

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Supply & Installation Charges- Schedule Electrical Items for CONSTRUCTION OF TRANSIT CAMP AT BHUJ SUBSTATION

Sl. No. DSR-2018 Item Code SAC Whether SAC in column ‘3’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘5’ is confirmed. If not indicate applicable rate of GST # Description (DSR'18 Items- Electrical Works) Unit Quantity Unit Charges Deduction of GST factor considered in DSR Unit Charges excl. GST Total Erection Charges excl GST Total Tax GST

PART - G (TC) : Schedule Items (Electrical) as per DSR 2018

1.Please Refer Indicaive list of approved make /model for all items . 2.All Light fittings are including lamp there is no separate item for Lamp.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per technical specifications

A.1 1.21.3 995461 18% Conduits with required associated accessories -20mm MTRS. 800 84 14.05% 73.65 58921.53 10605.87

A.2 1.21.3 995461 18% Conduits with required associated accessories - 25mm MTRS. 550 90 14.05% 78.91 43402.02 7812.36

A.3 1.21.3 995461 18% Conduits with required associated accessories - 40mm MTRS. 20 92 14.05% 80.67 1613.33 290.40

B WIRING 0.00 0.00

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel / PVC conduit as required. As per technical specification 0.00 0.00

4 X 10 sq. mm + 2 X 6 sq. mm earth wire FR PVC insulated copper conductor multistrand wires from MDB to lighting SDB.as per drawing, & direction of Engr-in-charge. 0.00 0.00

(PVC insulated copper conductor multistrand wires from SDB to 25A/16A Power points as per drawing, & direction of Engr-in-charge). 0.00 0.00

(1100V grade PVC insulated copper conductor multistrand wires From SDB to SB,SDB to 5 A Independent socket, 5A to 5A socket, SB to SB , MDB to Common SDB etc as per Drawing & direction of Engg-In -charge). 0.00 0.00

C MODULAR SWITCHES, BOXES, COVER PLATES FOR LIGHT, CEILING FAN, BELL POINTS, BELL STATION, 6A SWITCH SOCKET & 15A POWER SOCKETS :- 0.00 0.00

Supply, installation, testing ,delivery and commissioning of wiring accessories of approved ISI/CE certified make modular range such as modular switches, switch socket outlets, power sockets, etc. for the following with suitable mounting plates & boxes (modular range) in the required configuration As per technical specification, interior layout, drawing, site condition and as per direction of engg-in-charge. 0.00 0.00

C.1 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required (Crabtree make or equivalent approved make) 0.00 0.00

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 0.00 0.00

1way switch for light; fan, Exhaust fan and for 6A Power points of Crabtree Cat.No.ACVSXXW101 (Verona series) or equivalent approved make. 0.00 0.00

C.3 1.24.4 995461 18% 3 pin 5/6 amp socket outlet (for Switch board Type SBC) Nos. 12 111 14.05% 97.33 1167.91 210.22

provided on the same switch board wherever required as per the drawing,site condition & direction of engg-in-charge Crabtree Cat.No ACVKSWW063 (Verona series) or equivalent approved make. 0.00 0.00

10A one way bell push with indicator Dura Crabtree cat ACVSBXW101 or equivalent approved make. Nos. 4 126 14.05% 110.48 441.91 0.00

C.5 1.26 998736 18% Modular blanking plate on existing modular plate & switch box excluding modular plate as required Crabtree cat ACVPPBWX01 (Verona series) or equivalent approved make. Nos. 10 32 14.05% 28.06 280.58 50.50

INDEPENDENT POINTS 0.00 0.00

C.6 1.31 998736 18% Supplying and fixing suitable size GI box with modular plate and cover in front in recess, including providing andfixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. Make Crabtree (Verona series) or equivalent approved make SWITCH BOARD RA Nos. 19 401 14.05% 351.60 6680.40 1202.47

C.7 1.32 998736 18% Supplying and fixing suitable size GI box with modular plate andcover in front in recess, including providing andfixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Make Crabtree (Verona series) or equivalent approved make SWITCH BOARD RB Nos. 10 495 14.05% 434.02 4340.20 781.24

C.8 1.32& 2.10.1 998736 18% Supplying and fixing suitable size GI box with modular plate andcover in front in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 16 amps modular MCB type-C ,connection etc. as required. Make Crabtree (Verona series)or equivalent approved make SWITCH BOARD RAC Nos. 9 694 14.05% 608.51 5476.55 985.78

C.9 1.25 998736 18% Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Make crabtree model ACVRFHW005 or equivalent approved make Nos. 19 342 14.05% 299.87 5697.50 1025.55

D CONDUIT, WIRING, SOCKET & TAG BLOCK FOR TELEPHONE POINT :- 0.00 0.00

Supply, laying, delivery ,testing & installation towards telephone point wiring including supply of medium gauge PVC(MMS) conduit (ISI approved), PVC insulated 2 pair of 0.5 mm dia. electrolytic tinned copper wire in a separate PVC conduit from the telephone tag block(EPABX) to individual( telephone outlet point as per the drawing, site condition including its associated accessories and others of the following :- 0.00 0.00

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 0.00 0.00

D.1 1.21.1 998736 18% Rigid 20MM PVC conduits with required associated accessories MTRS. 150 84 14.05% 73.65 11047.79 1988.60

Supplying and drawing following pair 0.5 mm dia FRLS PVCinsulated annealed copper conductor, unarmored telephone cablein the existing surface/ recessed steel/ PVC conduit as required. 0.00 0.00

2 pair 0.5mm telephone cable with high density polyethylene insulated, solid annealed high conductivity along with rip cord of approved make Finolex (or) eqvnt. approved Make. 0.00 0.00

D.3 1.24.6 998736 18% Supply,delivery, installation ,testing and fixing of RJ11 telephone socket outlet of Crabtee Cat No ACVKRTW111 or equivalent approved make in the required configuration as per the drawing, interior layout, site condition including termination at both ends as per specification and as per direction of Engg-in-charge. Set 9 119 14.05% 104.34 939.06 169.03

E CONDUIT, WIRING,SOCKET & BOX FOR TV AMPLIFIER OF TV POINTS :- 0.00 0.00

Supply,delivery, laying and installation towards T.V. antena point wiring with RG8Fcoaxial cable in separate recessed medium gauge(MMS) PVC conduit from Junction box (incorporating the TV Amplifier) to individual T.V. socket as per the drawing, interior layout, site condition and as per direction of engg-in-charge for the following :-

E.1 1.21.1 998736 18% Rigid PVC conduits with required associated accessories 20MM MTRS. 100 84 14.05% 73.65 7365.19 1325.73

E.2 1.19 998736 18% Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mmsolid copper conductor PE insulated, shielded with fine tinnedcopper braid and protected with PVC sheath in the existingsurface/ recessed steel/ PVC conduit as required. MTRS. 100 33 14.05% 28.93 2893.47 520.82

Supply, testing,delivery,installation and fixing of T.V. socket outlet Crabtree ACVKTOW001 (Verona Series) in the required configuration including termination at both ends as per direction of engg-in-charge. 0.00 0.00

F INCOMING SUPPLY ITEMS VTPN MDB ,SDB , ENERGY METER 0.00 0.00

F.2 Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.(to be used in VTPN MDB above at Item F.1) 0.00 0.00

Sub Distribution Board (SDB), INCOMER ISOLATOR, RCCB, MCB 0.00 0.00

F.4 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. In the existing DB. 0.00 0.00

F.5 Supplying and fixing following rating, double pole, (single phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00 0.00

2.14.2 998736 18% 40 amps (30mA residual current,Short ckt 10kA,Test button IS12640 Part-1 ) of L&T ,Havells ,C&S (or) equivalent approved make Nos. 6 2095 14.05% 1836.91 11021.48 1983.87

F.6 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C”curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required. 0.00 0.00

1 Pole MCBs Type-C of following rating,10KA Short circuit rating installed in the outgoing above SDBs as per single line / power schematic diagram. 0.00 0.00

Cat no. NC 106N/110N/116N/120N/132N make L&T ,Havells ,C&S (or) equivalent approved make 0.00 0.00

J EARTHING STATION, EARTHING CONDUCTOR, G.I. Plate & GI Pipe :- 0.00 0.00

Supply, laying, installation,connecting,testing & commissioning of following earthing station, earthing conductor for difference purposes as specified in the technical specification & as per IS:3043 :- 0.00 0.00

J.1 5.11 998736 18% Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.pipe(Class-B) from earth electrode including connection with G.I. nut,bolt, spring, washer excavation and re-filling etc. as required mtrs. 15 483 14.05% 423.50 6352.48 1143.45

J.2 5.4 998736 18% Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Set 1 6216 14.05% 5450.24 5450.24 981.04

Total of Schedule Items as per DSR'18 Rates (Schedule 3G) ₹ 484,028.06 ₹ 87,045.51

Add percentage (%) above/below + / - on DSR 2018 Rates (to be quoted by contractor) 0.00%

Amount above/below +/- on the amount for DSR Items as per quoted percentage ₹ 0.00 ₹ 0.00

Total of Schedule 3G ₹ 484,028.06

Total Tax ₹ 87,045.51

# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

Date : Printed Name :

Place : Designation :

पावर ग्रिड कारपोरेशन ऑफ इंडिया लिमिटेड

POWER GRID CORPORATION OF INDIA LTD.

WRTS-II,RHQ,VADODARA

BILL OF QUANTITIES FOR CONSTRUCTION OF TRANSIT CAMP AT BHUJ SUB-STATION

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Supply & Installation Charges- Non-Schedule Electrical Items for CONSTRUCTION OF TRANSIT CAMP AT BHUJ SUBSTATION

Sl. No. Activity Header / Substation Name SAC Whether SAC in column ‘3’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘5’ is confirmed. If not indicate applicable rate of GST # Description (Non Schedule Items) Unit Quantity Unit Erection Charges Total Erection Charges Total Tax GST

(Service Accounting Codes)

PART - H (TC) : Non - Schedule Items (Electrical)

1 Bhuj S/s 998736 18% NS-01- Supplying and fixing of 4 (4+12 way) Double Door ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer) as required. Make (HAVELLS/C&S/L&T/HAGER/SCHENIDER ) (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) Nos. 1 0.00 0.00

2 Bhuj S/s 998736 18% NS-02 - Supplying and fixing following way prewired SP&N & TPN MCB distributionboard of CRCA steel sheet of not less than 1 mm thick for 240 volts on recess completewith loose wire box, terminal connectors for all incoming andoutgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks,Fully shielded tinned copperbus bar, neutral link, earth bar, detachable din bar, detachable gland plate,interconnections, powder painted including earthing etc. asrequired. (But without MCB/ RCCB/ Isolator)8+24 way, Double door (Havells Pearl Ivory double door Cat DHDPTHODPW08 or Equivalent approved make) with Three nos phase indication lamp of Havells Cat Red DHMCYSPX000 , Amber DHMCXSPX000 and Blue DHMCVSPX000 for Transit Camp Nos. 2 0.00 0.00

3 Bhuj S/s 995461 18% NS-03- Supplying,delivery, erecting, testing & commissioning of AC Static Watthour meter of 10-40A range suitable for measurement of energy (KWH) in 1 - phase, 2 wire. load conforming to IS:13779 of latest edition; CBIP publication and as per technical specification complete erected / mounted inside the above provided Meter box panel with suitable mounting accessories including wiring with required size of weather proof Cu PVC multistrand wire duly tested for class I accuracy in an approved manner, as per direction of engg-in-charge. (5 Nos for each panel in a Block including for common area lighting ) (Note :- The Meter should be of L&T / Havells / Secure make, Respective test certificate / calibration certificate to be submitted which is prerequisite.) Nos 1 0.00 0.00

4 Bhuj S/s 995461 18% NS-04- Telephone & TV Box.: Supplying,delivery,testing at site and installation of 10 pair telephone MDF of approved ITI make consisting of tag block in 1 nos of 10 pair krone, disconnector type, complete with metal enclosure powder coated, krone tag block mounting arrangement, telephone distribution chart and locking arrangement with duplicate key to be supplied (for EPABX / Direct BSNL lines). Set 1 0.00 0.00

5 Bhuj S/s 995461 18% NS-05 Telephone & TV Box Supplying, delivery, testing , installation of CRCA junction box (with red oxide paint & two coats of enamel paint of approved shade ) of size 250 X 250 X 150 mm surface on wall or recessed or semi recessed at suitable location for mounting the TV amplifier and TV splitter as per direction of engg-in-charge. Set 1 0.00 0.00

6 Bhuj S/s 995461 18% NS-06 Supply and installation of Ceiling light surface mounted 33W LED luminaire with minimum of 100 lumens/Watt complete with diffuser ABS housing and lamp having minimum two years warranty for Living/drawing room area as per drawing, civil layout, site condition and direction of engg-in-charge. Wipro Immaculate cat. no. CRCO10S036HP57 or equivalent Philips/Syska/crompton or other approved make DECORATIVE CEILING LIGHT CH Set 4 0.00 0.00

7 Bhuj S/s 995461 18% NS-07- Supply and installation of Decorative square moulded body, ceiling mounted fixture having CRI ≥ 70 with 8W LED lamp having life over 30000 burning hours and minimum 2 years warranty. Housing Made up of high grade ABS, UV stabilized diffuser for glare free light.Finish with matching ABS body The power factor is to be greater than 0.5. .Lamp holders :Pre-wired with 230V rated and pre-fitted with lamp suitable for 1.5 sqmm wire connection ready to use.Havells Matrix-4Pin Cat LHEAAJP7UL1W008 or equivalent Philips/Syska/Crompton/Wipro and other approved make SPOT LIGHT SLB Nos 42 0.00 0.00

8 Bhuj S/s 995461 18% NS-08 Supplying,delivery,erecting, testing and commissioning of environment friendly energy efficient sleek energy saver luminaire of 18W LED light fixture having life over 30000 burning hours and minimum two years waranty with Housing Made up of ultra slim extruded aluminium, powder coated with white finish. white coloured ABS end caps provided and with high quality diffuser for glare free light. Pre-wired with 230V having in-built driver pre-fitted with lamp having high efficacy of greater than or equal to 70 lm/W with specially designed warm start with lamp of 18W having power factor ≥ 0.90 along with other accessories connected with necessary 1.5 sq.mm flexible wire as required as per interior layout, site condition and direction of engg-in-charge. Havells E-Lite Cat LHEXBLP7IN1W018 or equivalent Philips/Syska/Wipro and other approved make TUBE LIGHT TL Nos 18 0.00 0.00

9 Bhuj S/s 995461 18% NS-09 Supplying,delivery,erecting, testing and commissioning of Asthetically designed circular shaped decorative wall/ ceiling light fixture suitable for 12W LED fixture with minimum two years warranty having life over 35000 burning hours including electronic driver with ABS Housing Made up of high quality, high temperature resistantABS. Reflector made up of high quality, high temperature resistant polycarbonate in white colour.Cover,Circular shape made up of high quality, high temperature resistant polycarbonate in black colour, fixed to the housing with 4 nos. self tapping screws provided with the fixture.Diffuser in opal matt finish for soothing light effect with no UV and IR radiations and CRI to be greater than or equal to 75. Havells KORONA 2 Cat LHEHCFP7UL6K012 or equivalent of approved make PERIPHERAL LIGHT -BL Nos. 12 0.00 0.00

10 Bhuj S/s 995461 18% NS-10 Supplying,delivery,erecting, testing and commissioning of asthetically designed decorative wall mounting fixture along with suitable 9W retrofit LED lamp having minimum two years warranty. Specification Housing Made up of high grade CRCA steel sheet, epoxy powder coated white after phosphochromate treatment.Reflector Made up of high purity pre anodised aluminium sheet.Diffuser Thermoformed methacrylate, UV stabilised, heat resistant acrylic cover in parabolic shape, opal finish for glare control and soothing light effect to create proper ambience.Lamp holder B22 lamp holder in engineering plastic grade provided as standard.Electric gear Pre-wired upto terminal block for CFL operation. Havells Beetle Cat LHDL07150099 or equivalent Philips/Wipro/Syska and other approved make drawing, site condition and direction of engg-in-charge. BRAKET LIGHT TYPE- BL Nos. 25 0.00 0.00

11 Bhuj S/s 995461 18% NS-11 Supply delivery,testing and erecting 6 Watt LED Mirror Light fixture with minimum two years warranty having lumens ≥540, CRI ≥80 – Syska Make SSK-T5-6W or equivalent Philips/Wipro/Crompton and other approved make. MIRROR LIGHT - ML Nos. 8 0.00 0.00

12 Bhuj S/s 995461 18% NS-12 Supplying, erecting, testing and commissioning of high speed 48" (1200mm sweep) , 400 RPM , Air Delivery 230 CMM ,double ball bearing ceiling fan with condenser A.C. 230V, 50 cycles with canopy, down rod upto 300mm length with rubber bushing, bolts & nuts in the provided fan hook box of required size complete erected of Havells Velocity HS model or equivalent reputed approved make of (or) crompton (or) Usha (or) Bajaj make. Nos. 19 0.00 0.00

13 Bhuj S/s 995461 18% NS-13-Supplying, delivery,erecting, testing and commissioning of exhaust fan of 1200 RPM of 250mm size Air Delivery 860 CMH Made of High quality engineering plastic resistant to colour change with anti static properety with bracket blades complete for light duty suitable for operate 230V 50Hz, AC supply. with cawl for using in Kitchen Havells Ventilair DX model or equivalent approved make of (or) crompton (or) Usha (or) Bajaj make. Nos. 1 0.00 0.00

14 Bhuj S/s 995461 18% NS-14- Supplying, delivery,erecting, testing and commissioning of exhaust fan of 1280 RPM of 200mm size Air Delivery 520 CMH Made of High quality engineering plastic resistant to colour change with anti static properety with bracket blades complete for light duty suitable for operate 230V 50Hz, AC supply. with cawl for using in Kitchen Havells Ventilair DX model or equivalent approved make of (or) crompton (or) Usha (or) Bajaj make. Nos. 8 0.00 0.00

Total of Schedule 3H ₹ 0.00 ₹ 0.00

# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

Date : Printed Name :

Place : Designation :

Schedule TAXES & DUTIES

Sl. No. Item Nos. Total Price

1 TOTAL GST on Services

A Total GST on Installation Services (indentified in Schedule-3A) which are not included in the Installationas per the provision of the Bidding Documents, as applicable ₹ 9,229,411.53

B Total GST on Installation Services (indentified in Schedule-3B) which are not included in the Installationas per the provision of the Bidding Documents, as applicable ₹ 0.00

C Total GST on Installation Services (indentified in Schedule-3C) which are not included in the Installationas per the provision of the Bidding Documents, as applicable ₹ 401,100.76

D Total GST on Installation Services (indentified in Schedule-3D) which are not included in the Installationas per the provision of the Bidding Documents, as applicable ₹ 0.00

E Total GST on Installation Services (indentified in Schedule-3E) which are not included in the Installationas per the provision of the Bidding Documents, as applicable ₹ 1,690,607.23

F Total GST on Installation Services (indentified in Schedule-3F) which are not included in the Installationas per the provision of the Bidding Documents, as applicable ₹ 0.00

G Total GST on Installation Services (indentified in Schedule-3G) which are not included in the Installationas per the provision of the Bidding Documents, as applicable ₹ 87,045.51

H Total GST on Installation Services (indentified in Schedule-3H) which are not included in the Installationas per the provision of the Bidding Documents, as applicable ₹ 0.00

GRAND TOTAL [A+B+C+D+E+F+G+H] ₹ 11,408,165.03

Date : 0 Printed Name : 0

Place : 0 Designation : 0

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(GRAND SUMMARY)

Bidder’s Name and Address (Sole Bidder) : To:

Name : Contract Services

Address : Power Grid Corporation of India Ltd.,

Western Region Transmission syatem -II

Plot No. 54, Near Riya revati resort ,

Sama - savli road, vadodara-390008

Sl. No. Description Total Price

1 TOTAL SCHEDULE - 3A

Installation Charges- Schedule Items for CONSTRUCTION OF B-1,B-2, B-3, C & D TYPE RESIDENTIAL QUARTERS AT BHUJ SUBSTATION ₹ 51,274,508.53

2 TOTAL SCHEDULE - 3B

Installation Charges- Non-Schedule Items for CONSTRUCTION OF B-1,B-2, B-3, C & D TYPE RESIDENTIAL QUARTERS AT BHUJ SUBSTATION ₹ 0.00

3 TOTAL SCHEDULE - 3C

Installation Charges- Schedule Items for CONSTRUCTION OF B-1,B-2, B-3, C & D TYPE RESIDENTIAL QUARTERS AT BHUJ SUBSTATION ₹ 2,228,337.57

4 TOTAL SCHEDULE - 3D

Installation Charges- Non-Schedule Items for CONSTRUCTION OF B-1,B-2, B-3, C & D TYPE RESIDENTIAL QUARTERS AT BHUJ SUBSTATION ₹ 0.00

5 TOTAL SCHEDULE - 3E

Installation Charges- Schedule Items for CONSTRUCTION OF TRANSIT CAMP AT BHUJ SUBSTATION ₹ 9,392,262.36

6 TOTAL SCHEDULE - 3F

Installation Charges- Non-Schedule Items for CONSTRUCTION OF TRANSIT CAMP AT BHUJ SUBSTATION ₹ 0.00

7 TOTAL SCHEDULE - 3G

Installation Charges- Schedule Items for CONSTRUCTION OF TRANSIT CAMP AT BHUJ SUBSTATION ₹ 484,028.06

8 TOTAL SCHEDULE - 3H

Installation Charges- Non-Schedule Items for CONSTRUCTION OF TRANSIT CAMP AT BHUJ SUBSTATION ₹ 0.00

ITEMS TAB: Item 01 Line Number 0001 Total of Service/Installation Charge ( INSTALLATION FOR DCB (INR) : SRM ATB for BID PRICE SUMMARY Statement ) ₹ 63,379,136.52

ITEMS TAB: Item 02 Line Number 0002 Total GST against Service/Installation Charge (GST - SERVICES FOR SRM ATB for BID PRICE SUMMARY Statement ) ₹ 11,408,165.03

GRAND TOTAL ₹ 74,787,301.55

* PLEASE FILL THE VALUES HIGHLIGHTED IN YELLOW IN RESPECTIVE ITEMS TAB FOR BID COMPARISION SHEET

Date : 0 Printed Name : 0

Place : 0 Designation : 0

Name of Package : Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Package No : 5002001088

Specification No. : 5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2

Completion Period 11 Months

: Attachments : General guidelines for filling up the Attachments : 5002001088 :

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Specification No.: 5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3(QR), 6, 7, 8, 9, 11, 12, 13,14, 15, 16, 17 ,20 are included here.

3 Attachment 1 Bid Security : To be submitted as per proforma provided in the bidding document.

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

5 Integrity Pact : To be submitted as per ITB Vol-IA and as per remarks in the Attach 14-IP.

6 Attachment 18, 19 are in MS word format

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Individual Firm 1

Licensee of a Manufacturer 2

Enter following details of the bidder Representative of a Manufacturer

Specify type of Bidder [Select from drop down menu] Individual Firm #REF!

Name of Sole Bidder [Individual Firm]

Address of Registered Office & Mobile Numbers

Printed Name 01/Dec/12

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-3(JV) 5002001088 #REF! 5002001088

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(Joint Venture Agreement and Power of Attorney for Joint Venture*)

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials #REF!

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

Name(s) and Addresse(s) of other partner(s)

Name : #REF! #REF!

Address : #REF! #REF!

The Joint Venture Agreement (as per the proforma attached at no. 15 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at no. 14 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith.

Date : Printed Name : 0

Place : Designation : 11 Months

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-3(QR)

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(Qualifying Requirement Data)

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 Regional Head Quarter,

…….. …… ………. ………. Plot No. 54, Adjacent to Riya-Revati Resort,

Dear Sir, Opp. Ambe Vidyalaya, Sama-Savli Road,

Vadodara-390008

In support of the Qualification Requirements (QR) for bidders, stipulated in Annexure A QR in Vol I of the Bidding Documents, we furnish herewith our QR data/details/documents etc. along with other information, as follows (The QR stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR data given in Annexure A ITB in Vol I shall prevail).

We are furnishing the following details/document in support of Qualifying requirement for the subject package.

A Attached copies of original documents defining :

a) The constitution or legal status;

b) The principal place of business;

c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).

B Attached original & copies of the following documents :

a) Written power of attorney of the signatory of the Bid to commit the bidder.

1.0 GENERAL INFORMATION

Bidder is required to provide general information as per the following format.

S No. Particulars For Individual Firm

1 Name of the Firm

2 Head Office/ Registered Office Address

5 Contact Person

6 Place of Incorporation/ Registration

7 Year of Incorporation/ Registration

8 Nationality of the Agency

[Necessary documents to establish legal status of the bidder should be uploaded with the bid]

2.0 TECHNICAL REQUIREMENTS {Reference Section-III}

2.1 Bidder should have successfully completed execution of ““Any type of Building Work” for Govt. Or Semi Govt., OR reputed private sector organisations during preceding seven (07) years ending last day of the month previous to one in which bids are invited, of value not less than that specified below as on the originally scheduled date of bid opening (i) One similar work of value not less than Rs. 6.68 crores or (ii) Two similar works, each of value not less than Rs. 4.18 crores or (iii) Three similar works, each of value not less than Rs. 3.34 crores

2.2 Format for the Bidder for indicating its technical experience (in support of meeting the requirement of para 2.1 above is to be furnished, as applicable, using this format]

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

3.0 FINANCIAL REQUIREMENTS {Reference Section-III}

3.1 The Minimum Annual Average Turnover (MAAT) of the bidder for the best three (3) financial years out of the preceding five (5) financial years shall be Rs. 12.53Crores.

However, in accordance with GoI guidelines, Micro & Small Enterprises (MSEs) will be considered qualified if their MAAT for the best three (3) financial years out of the preceding five (5) financial years meets 80% of the criteria stipulated above i.e. Rs. 10.03 Crores.

3.2 Format for the Bidder for indicating its Financial Criteria (in support of meeting the requirement of para 3.1 above is to be furnished, as applicable, using this format]

Financial Year Turnover(in lakhs)

Details of documents furnished in the Bid, in support of the aforesaid data/details/informations Yes

In case bidder is a holding company, MAAT referred to in (a) above shall be of that holding company only (i.e. excluding its subsidiary/group companies). In case bidder is a subsidiary of a holding company, MAAT referred to in (a) above shall be of that subsidiary company only (i.e. excluding its holding company/other companies in the group). No

3.3 As per requirement at para 3.2 above, audited balance sheet and income statements for the last five years, as stated below are attached: Yes

Years preceding to the bid opening Audited balance Sheet and Income Statement Enclosed

3.4 Liquid Assets (LA) and/or evidence of access to or availability of credit facilities

4.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid.

4.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

5.0 OTHER INFORMATION

Current Contract Commitments of works in progress

Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Ordered Quantity as per Contract Balance Quantity to be supplied as on Completion Period for balance quantity

Commencement Completion

0 Printed Name : 0

Date : 0-Jan-00 Designation : 0

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-4(A) 5002001088

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.

S.No. For Equipment Item Description Unit Quantity

Date : Printed Name :

Place : Designation :

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-4(B) 5002001088

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

Date : Printed Name :

Place : Designation :

5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-5

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(Items,Components, Raw material, Services Proposed to be sourced from Micro and Small Enterprises)

Bidder’s Name and Address (Lead Partner) : To:

0 Contracts and Materials

Name : Power Grid Corporation of India Limted

Address : Western Region Transmission System-II

Regional Head Quarter, Plot No 54

…….. …… ………. ………. Adjacent to Riya Revati Resort,Opp. Ambe Vidyalaya ,

Dear Sir, Sama Savli Road, Vadodara-390008

We hereby furnish the details of the items/components, raw material,services which we propose to buy/avail from Micro and Small Enterprises(MSEs) for the purpose of completion of works under the subject Package:

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises(MSEs)

Name & Address Category(Micro or Small)

We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.

Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.

Name of Plant Address

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-5

(Items,Components, Raw material, Services Proposed to be sourced from Micro and Small Enterprises)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises(MSEs)

Name & Address Category(Micro or Small)

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-6 5002001088

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 Regional Head Quarter,

…….. …… ………. ………. Plot No. 54, Adjacent to Riya-Revati Resort,

Opp. Ambe Vidyalaya, Sama-Savli Road,

Dear Sir, Vadodara (Gujarat) – 390 008

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : 0-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-7 5002001088

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(Details of Alternative Bid)

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 Regional Head Quarter,

…….. …… ………. ………. Plot No. 54, Adjacent to Riya-Revati Resort,

Opp. Ambe Vidyalaya, Sama-Savli Road,

Vadodara (Gujarat) – 390 008

No Alternative Bid

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-8 5002001088

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(Manufacturer's Authorization Form)

Contracts and Materials

Power Grid Corporation of India Ltd.,

"Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001 Name of Manufecture Name/Description of Goods Factory Address Name & Address of Bidder package name alongwith project name

…(insert name of the Manufacturer) .. …(insert name and/or description of the goods) … ..(insert address of factory) .. Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

WE …(insert name of the Manufacturer) .. who are established and reputable manufacturers of …(insert name and/or description of the goods) …. having production facilities at ..(insert address of factory) .., , , do hereby authorize , , , …….. …… ………. ……….(hereinafter, the “Bidder”) to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation including the above plant & equipment or other goods produced by us. 0

WE …(insert name of the Manufacturer) .. who are established and reputable manufacturers of …(insert name and/or description of the goods) …. having production facilities at We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations.

We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations. We also hereby declare that we and have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability). We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract. ..(insert address of factory) .., , , do hereby authorize , , , …….. …… ………. ……….(hereinafter, the “Bidder”) We also hereby declare that we and have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability).

For and on behalf of the …(insert name of the Manufacturer) .. to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation including the above plant & equipment or other goods produced by us. We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract.

In the capacity of

Date : Printed Name :

Place : Designation :

Note :1 The letter of Undertaking should be on the letterhead of the Manufacturer and should be signed by a person competent and having Power of Attorney to legally bind the Manufacturer. It shall be included by the bidder in its bid.

2 Above undertaking shall be registered or notarized so as to be legally enforceable.

5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment 8

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(Declaration of Key Managerial Person and Power of Attorney holder)

Bidder’s Name and Address (Lead Partner) : To:

Contract Services

Name : 0 Power Grid Corporation of India Limited

Address : 0 Western Region Transmission System-II

0 Regional Head Quarter

Sama-Savli Road, Vadodara-390008

1. We confirm that the declarations made in our bid, particularly Attachment-3 (QR) regarding eligibility/qualification data and documents submitted in our bid in support of the declarations, are true and correct to the best of our knowledge. 2. We further confirm that we have filled up Attachment-3(QR). We also confirm that in support of meeting the Technical experience requirement as per Annexure-A (BDS), we have enclosed self-certified copy of Contract/ Award Letter and certificate from the utility for which the contract has been executed. 3. We shall furnish clarification to bid, if any sought by Employer pursuant to ITB clause 21.1. We understand that if we fail to rectify/furnish the requested documents if any, within 7 working days’ notice, our bid is liable to be rejected. 4. We understand that any false declaration and/or misrepresentation of facts and/or furnishing of false/forged documents /information may lead to our debarment from participation in Employer tenders and that our Bid Security/ Contract Performance Guarantee may be forfeited besides other actions as deemed to be appropriate as per the provisions of the Bidding Document/Integrity Pact/Employer’s policy.

5*. Our Balance Bid Capacity net of works under execution, calculated as per Clause ITB 23.2.1 (i.e. 3T-B), as on 1st date** of the Quarter in which First Envelope Bids are to be opened i.e. 01st

(MM/YYYY) in equivalent Indian Rupees is

Crore. The details of value used for working out the Balance Bid Capacity as above, are as follows:

A. Maximum value of similar works (e.g. value related to EHV Transmission Lines /Substations of 110 kV and above in case of Tower/ Substation Packages respectively) executed during the last 5 financial years taking into account the completed as well as the works in progress(T)

S N FY Value of Total Sales (including Taxes and Duties)(T)

B. Value of existing commitments and ongoing similar works yet to be completed as on the 1st date of quarter of the financial year in which the bids are opened(B) as on 1st date of the Quarter in which First Envelope Bids are to be opened

S N Value of Balance Works (B1) against the Contracts awarded by Employer Value of Balance Works (B2) against the Contracts awarded by Utilities other than Employer Total value of Balance Works (B){B=B1+B2}

[**1st day of the quarter in which the first envelope bids are opened for e.g. If the actual date of opening of first envelope bids is 15th June 2016, the Balance bid capacity as on 01st April 2016 is to be declared)] *(Applicable only in case of package for which the stipulated Qualification Requirements in respect of Technical experience pertains primarily to erection, testing and commissioning/civil works viz. transmission Line tower packages/Substation package/civil works package etc.)

5. Notwithstanding above, we also understand that the Bid Capacity/Manufacturing Capacity as declared hereinabove, shall be subject to assessment, if any, by the Employer, which shall be final and binding. We also confirm that the Employer may verify the supporting documents/ details in connection with above declarations. We further understand that in case of any unethical practices inter-alia including any misrepresentation of facts, submission of false and/or forged details/ documents/ declaration by us, we may be debarred from the participation in Employer’s tenders in future as considered appropriate by Employer and our Bid Security/ Contract Performance Guarantee shall be forfeited besides taking other actions as deemed appropriate.

Date : 0-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Note: Key Managerial Personnel (KMP) of the company shall include CEO/Managing Director/ Company Secretary/ Director/ CFO/any of the partner in case of partnership firm/any other officer entrusted with substantial powers of the management of the affairs of the company/firm.

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-9

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(Work Completion Schedule)

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 Regional Head Quarter,

…….. …… ………. ………. Plot No. 54, Adjacent to Riya-Revati Resort,

Opp. Ambe Vidyalaya, Sama-Savli Road,

Vadodara (Gujarat) – 390 008

We hereby declare that the following Delivery Schedule shall be followed by us for the subject Package i.e., Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work Period in months from the effective date of Contract

1 Submission of drawings for Approval

2 Production of samples for type testing

3 Completion of type tests

4 Commencement of Commercial Production

5 Offer of material for pre-despatch testing and inspection

6 Commencement of shipment

1 Completion of Work 11

The Schedule of Completion of various items are as under

Sl. No. Name of Activity Period from Date of LOA

Commencement Completion

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-10 5002001088

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(Guarantee Declaration)

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 Regional Head Quarter,

…….. …… ………. ………. Plot No. 54, Adjacent to Riya-Revati Resort,

Opp. Ambe Vidyalaya, Sama-Savli Road,

Vadodara (Gujarat) – 390 008

We conform that the equipments offered shall have minimum performance specified in Technical Specification. We further guarantee the performance/efficiency of the equipments in response to the Technical Specifications.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-11 5002001088

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 Regional Head Quarter,

…….. …… ………. ………. Plot No. 54, Adjacent to Riya-Revati Resort,

Opp. Ambe Vidyalaya, Sama-Savli Road,

Dear Sir, Vadodara (Gujarat) – 390 008

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-12 5002001088

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(Price Adjustment Data)

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 Regional Head Quarter,

…….. …… ………. ………. Plot No. 54, Adjacent to Riya-Revati Resort,

Opp. Ambe Vidyalaya, Sama-Savli Road,

Vadodara (Gujarat) – 390 008

We hereby furnish the relevant details pertaining to the price adjustment provisions for equipment as specified in your specifications and documents for the Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj SubstationThe necessary documentary evidence are enclosed :

Sl. No. Name of Materials Value of co-efficient Name of the published index * Value of index as 30 days prior to date set for opening of bids as on **

1 EC grade aluminium ingots, co-eifciant a = 0.65 CACMAI

High Tensile Galvanised Steel wires , co-efficient b = 0.15 CACMAI FALSE FALSE

High Carbon Steel Rods , co-efficient b = High Tensile Galvanised Steel wires , co-efficient b =

High Grade Electrolytic Zinc , co-efficient c =

3 Labour, Co-efficient l= 0.05 Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)

Note: * Indicate the publisher of the index.

** Indicate the date of indices for which the values are being furnished.

^ For bidders who intend to quote their prices based on High Tensile Galvanised Steel wire, the coefficient for the same (i.e. coefficient ’b’ for High Tensile Galvanised Steel wire) shall be 0.15 and coefficient ‘c’ shall not be applicable.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-13 5002001088

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(Declaration regarding Social Accountability)

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 Regional Head Quarter,

…….. …… ………. ………. Plot No. 54, Adjacent to Riya-Revati Resort,

Opp. Ambe Vidyalaya, Sama-Savli Road,

Vadodara (Gujarat) – 390 008

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-14 5002001088

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 Regional Head Quarter,

…….. …… ………. ………. Plot No. 54, Adjacent to Riya-Revati Resort,

Opp. Ambe Vidyalaya, Sama-Savli Road,

Vadodara (Gujarat) – 390 008

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact (if required)is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Power Grid Corporation of India Limited

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as

having its Registered Office at …….. …… ………. ……….

having its Registered Office at FALSE

hereinafter referred to as

"The Bidder/Contractor"

POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 1 of 8

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation Package and Specification Number 5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 POWERGRID values full compliance with all relevant laws and regulations, and the principles of economical use of resources, and of fairness and transparency in its relations with its Bidders/ Contractors.

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as under:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles during his participation in the tender process and during the contract execution :

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 2 of 8

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

(Office Seal) (Office Seal)

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Integrity Pact Page 8 of 8

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

Power Grid Corporation of India Limited

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as

Individual Firm

having its Registered Office at

hereinafter referred to as

"The Bidder/Contractor"

POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Tower Package (Package-P238-TW05 ) for 765kV S/C (100 km.) & 765 kV D/C (62 km.) Gwalior-Jaipur Transmission Line (Part-I) associated with Phase-I Generation Projects in Orissa (Part -C)

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 1 of 8

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as unde r:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles during his participation in the tender process and during the contract execution :

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 2 of 8

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

(Office Seal) (Office Seal)

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Integrity Pact Page 8 of 8

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise)

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials

Name : Power Grid Corporation of India Limited

Address : Western Region Transmission System-II

Regional Head Quarter, Plot No 54

Adjacent to Riya Revati Resort,Opp. Ambe Vidyalaya ,

Sama Savli Road, Vadodara-390008

We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1. Name of the Supplier/ Contractor in whose favour payment is to be made

2. Address with PIN Code and State

Registered Office:

Correspondence Address:

3.(a) Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

3(b) Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for MSE order 2012 including subsequent amendment/ notification/order(indicate yes/No) Note: Documentary evidence is to be attached.Please refer remarks at the end of the attachment No Yes(Documentary Evidence Attached)

3. (C) If 3(b) is 'Yes' please mention whether you are (Proprietary MSE/Partnership MSE/Private Limited Company) owned by SC/ST entrepreneur

4. Permanent Account (PAN) No. No

5 GSTIN Numbers

I GSTIN in the Sates/UT from where the supply of goods take place

Name of the States/UT GSTIN number

II GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)

Name of the States/UT GSTIN number

6 PF Registration No. of the Company

7 PF Regional Office covered (with Address)

8 Name of Contact Person

9 Telephone No(s)

10 Bank Details for Electronic Payment

Name of the Bank:

Address of Branch: 1

Current Account

Type of Account:

Type of Account:

11 9 digit MICR code printed at bottom in middle, next to cheque no.

12 IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

*The definition of MSE owned by SC/ST is as given under: a) In case of proprietary MSE, proprietor(s) shall be SC/ST. b) In case of partnership MSE, the SC/ST partners shall be holding at least 51% sharesin the unit. C)In case of Private Limited companies at least 51% share shall be held by SC/ST promoters Documentary Evidence : Scanned copies of SC/ST certificate issued by District Authority as applicable for SC/ST MSE category (a), (b) or (c) above

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-16 5002001088

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Format for evidence of Access to or Availability of credit facilities

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 Regional Head Quarter,

…….. …… ………. ………. Plot No. 54, Adjacent to Riya-Revati Resort,

Opp. Ambe Vidyalaya, Sama-Savli Road,

Vadodara (Gujarat) – 390 008

In support of the additional information required , we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

1.0 The Bidder shall furnish

A certificate from their Banker(s) (as per prescribed formats in Qualifying Requirements) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers.

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the (Sole Bidder [Individual Firm]) :

Name of the Banker by whom certificate issued

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorization Letter(s) from the bidder addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:(Bidder to enclose Authorization letter as per format in QR)

Sl. No. Letter Ref. Date Addressed to (name of the Bank)

2.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(p)(ii)]

2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

3.0 Description of the plant for carrying out the work

Bidders should provide information of the plant(s) for carrying out the work including the proposal of manufacturing methods in sufficient detail to demonstrate the adequacy of the bidder’s proposals to meet the technical specification.

4.0 OTHER INFORMATION

4.1 Current Contract Commitments of works in progress

Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Type of Conductor Ordered Quantity as per Contract Balance Quantity to be supplied as on Completion Period for balance quantity

Commencement Completion

4.2 Financial Data:

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Specification No. :5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-17 5002001088

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Bidder’s Name and Address (Sole Bidder [Individual Firm]) : To:

Contracts and Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 Regional Head Quarter,

…….. …… ………. ………. Plot No. 54, Adjacent to Riya-Revati Resort,

Opp. Ambe Vidyalaya, Sama-Savli Road,

Vadodara (Gujarat) – 390 008

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Attachment-20

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

(Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Limited

Address : Western Region Transmission System-II

Regional Head Quarter, Plot No 54

Adjacent to Riya Revati Resort,Opp. Ambe Vidyalaya ,

Sama Savli Road, Vadodara-390008

This has reference to the Terms & Conditions for the e-Reverse Auction mentioned in the Business Rules for

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Specification No. 5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2

We confirm that:

1) The undersigned is authorized representative of the Bidder.

2) We have studied the e-Reverse Auction Terms & Conditions and the Business Rules governing the e-Reverse Auction as mentioned in your letter and confirm our agreement to them.

3) We understand that ASP shall arrange to demonstrate/ train (if not trained earlier) bidders’ nominated person(s), without any cost. They will also explain all the Rules related to e-Reverse Auction/ Business Rules Document to be adopted along with bid manual. We have further noticed that we at own discretion may ask for additional training to use the e-RA platform well in advance before start of the e-RA event by contacting the ASP at any suitable time. All such additional trainings shall also be free of cost.

We hereby confirm that we will honor the Bids placed by us during the auction process.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 Bid Form 1st Envelope 1 one 1 st 1 January

2 two 2 nd 2 February

BID FORM (First Envelope) 3 three 3 rd 3 March

4 four 4 th 4 April

Bid Proposal Ref. No. 5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2 5 five 5 th 5 May

Date : 00-Jan-00 6 six 6 th 0 6 June

7 seven 7 th 1 7 July

To: 8 eight 8 th January 8 August

Name : 9 nine 9 th 1900 9 September

Power Grid Corporation of India Limited 10 ten 10 th 10 October

Western Region Transmission System-II 11 eleven 11 th 11 November

Regional Head Quarter, 12 twelve 12 th 12 December

Plot No. 54, Adjacent to Riya-Revati Resort,

Vadodara (Gujarat)-390008

Opp. Ambe Vidyalaya, Sama-Savli Road, 13 thirteen 13 th

14 fourteen 14 th

Name of Contract : Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation 15 fifteen 15 th

Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th

1.0 Having examined the Bidding Documents, including Amendment Nos. .. [Enter Amendment No.].. .. dated ...[Enter Amendment Date]… the receipt of which is hereby acknowledged, we the undersigned, offer to supply the Goods and perform related services under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 6.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). We including any subcontractors or manufacturers for any partt of the contract, do not have any conflict of interst in accordance with ITB Clasuse 1.2.2. .. [Enter Amendment No.].. .. ...[Enter Amendment Date]… the receipt of which is hereby acknowledged, we the undersigned, offer to supply the Goods and perform related services under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 6.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). We including any subcontractors or manufacturers for any partt of the contract, do not have any conflict of interst in accordance with ITB Clasuse 1.2.2. 17 seventeen 17 th

2.0 Attachments to the Bid Form (First Envelope) Bank Draft 18 eighteen 18 th

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Enter details here. Pay Order 19 nineteen 19 th

(a) Attachment 1 Bid Security, in a separate envelope, in the form of for a sum of initially valid for a period of (0) days from the date set for opening of QR bids. MSME /NSIC exemption Zero 20 twenty 20 th

(b) Attachment 2 A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 2. Please note that if amount of bid security is less than Rs. 500000/-, your bid may be rejected Bank Guarantee (0) 21 st

(c) Attachment 3 The documentary evidence that we are eligible to bid in accordance with ITB Clause 6.3 (C). Further, in terms of ITB Clause 6.3(c) , the qualification data has been furnished as per your format enclosed with the bidding documents Annexure 1 in Vol IA (QR). TDR/FDR 22 th

#REF! Applicable 23 th

#REF! Not Applicable 24 th

(d) Attachment 4 The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. 25 th

(e) Attachment 5 Not Applicable 26 th

(f) Attachment 6 The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th

(g) Attachment 7 Not Applicable 28 th

(h) Attachment 8 Declaration of Key Managerial Persons & Power of Attorney Holder 29 th

(i) Attachment 9 Work Completion Schedule 30 th

(j) Attachment 10 Guarantee Declaration. 31 st

(k) Attachment 11 Information regarding ex-employees of Purchaser in our firm.

(l) Attachment 12 Price Adjustment Data

(m) Attachment 13 Declaration regarding Social Accountability.

(n) Attachment 14 Integrity Pact

(o) Attachment 15 Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise.

(p) Attachment 16 Format for evidence of Access to or Availability of credit facilities

(q) Attachment 17 Declaration regarding Price Bid

(r) Attachment 18 Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order, if applicable

(s) Attachment19 Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order, if applicable

(t)Attachment 20 Process Compliance for e-RA

3.0 Second Envelope

In continuation of First Envelope of our Bid, we have submitted the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our bid. Accordingly we the undersigned, offer to execute the Works under the above named package in full confirmity with the said bidding documents for the sum specified in our Second Envelope Bid, in accordance with the terms & conditions of the Bidding Documents. We hereby confirm that the total amount of our bid is in accordance with the prices quoted by us under diffferent heads as detailed below: i. Erection Charges excluding GST ii. GST

4.0 Undertakings/Compliances

4.1 We are aware that, in line with Clause No. 17.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.

4.3 We declare that as specified in Clause 5.7, ITB, Vol.-IA of the Bidding Documents, the prices of all the Goods to be supplied under this contract shall remain firm during the currency of the contract and no price adjustment shall be applicable..

4.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced.

4.6 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

4.7 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN , in all the states where the project is located and the states from which we shall make our supply of goods.

4.8 100% of applicable Taxes and Duties i.e GST , which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

4.9 We further understand that notwithstanding 4.0 above, in case of award on us, you shall also bear and pay/reimburse to us, GST in respect of Supply of Services by us to you, by the Indian Laws.

5.0 Construction of the Contract

5.1 We declare that we have studied clause GCC 12 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us the Contracts covering all goods and related services.

6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:

(a) GCC Clause 8 & SCC Clause 13( Taxes, duties and levies/ Contract Price)

(b) GCC Clause 14 & SCC Clause 18( CPG)

(c) GCC Clause 18 & SCC Clause 4( Time the essence of Contract/ Completion Schedule/ Period)

(d) GCC Clause 26.5 ( Patents & Royalties)

(e) GCC Clause 45 ( Gurantee)

(f) GCC Clause 46 ( Defect Liability Period )

(g) GCC Clause 64 & SCC Clause 15 ( Payments on Account/Terms of Payment)

(h) GCC Clause 66 & SCC Clause 14

(j) GCC Clause 69 ( Arbitration & Laws)

(k) GCC Clause 70 ( Laws & Jursidiction of Contract)

7.0 We confirm that we stand committed to comply with al requirements of Social Accountability Standards

8.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award to us, and to achieve the delivery of goods and related services within the time stated in the Bidding Documents.

9.0 If our bid is accepted, we undertake to provide an Advance Payment Security and Performance Security(ies) in the form and amounts, and within the times specified in the Bidding Documents.

10.0 We agree to abide by this bid for a period of 180 days from the date fixed for opening of bids (first envelope) as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period

11.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

12.0 We understand that you are not bound to accept the lowest or any bid you may receive.

13.0 Commissions or gratuities, if any, paid or to be paid by us to agents relating to this Bid, and to contract execution, if we are awarded the contract, are listed below:

14.0 Name and address of agent Amount and Currency Purpose of Commission or gratuity

18.0 (If none, state “none”)

13.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

ElectronicForms™

View - Template of ElectronicForm™

To close this Screen, click on the [Close] button located on the bar above, or at the bottom of the Screen

Template of ElectronicForm™

Relevant Bid-Part Techical

ElectronicForm™ Template ID 7PG-2010-FT000010

Template Reference TECHNO-COMMERICIAL (First Envelope)

Template Description Tower Package 5002001088 Specification No. : 5002001088/OTHERS/DOM/G01 - WR2 RHQ - 2

Construction of balance building of Residential Quarters and Construction of Transit Camp at Bhuj Substation

Bidders's Name #REF!

Section-2 (Outline of Requirements)

* 1 Integrity Pact Details

Submitted (Doc. Code No. DC-9008-April-2009-Rev-0) Yes

* 2 BID SECURITY DETAILS

2 (a) Submitted Yes

* 2 (b) Bid Security No.

* 2 (c) Issued by (Name of Bank)

* 2 (d) Bid Security Amount #REF! #REF!

* 2 (e) Valid upto

* 1. AUTHORIZED SIGNATORY (Sole Bidder / Lead Partner of JV)

1 (b) Designation

2. AUTHORIZED SIGNATORY (Other Partner of JV)

(If Bidder is JV)

2 (a) Name #REF!

2 (b) Designation #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

AMENDMENT NO. - I

(AMENDMENT NO.-I TO CONDITIONS OF CONTRACT FOR "CIVIL WORKS" CONTRACT

(DOCUMENT CODE NO.: DC-5010-JULY'1992)

S.No. CLAUSE/ SEC./ EXISTING CLAUSE AMENDED AS

1 Cl. 9.0 (a), Sec.-NIT, Earnest Money Call Deposit receipt …………………………… or Pay Order or Demand Draft in favour of POWERGRID from any of the Nationalised or Scheduled Banks. Call Deposit receipt ……………………………………………… or Pay Order or Demand Draft in favour of Power Grid Corporation of India Ltd. from a Reputed Commercial Bank/ Financial Institution i.e. IFCI, ICICI, IDBI.

2 Cl. 9.0 (c), Sec.-NIT, Earnest Money Irrevocable Bank Guarantee from a Nationalised Bank valid and operative ……………………… as Annexure-E to the General Condition of Contract. Irrevocable Bank Guarantee from a Reputed Commercial Bank/ Financial Institution i.e. IFCI, ICICI, IDBI valid and operative ……………………………………………… as Annexure-E to the General Condition of Contract.

3 Cl. 9.0 (d), Sec.-NIT, Earnest Money Fixed deposit receipt issued by Nationalised Bank endorsed in favour of POWERGRID. Fixed deposit receipt issued by a Reputed Commercial Bank/ Financial Institution i.e. IFCI, ICICI, IDBI endorsed in favour of POWERGRID.

4 Cl. 14.0, Sec.- GCC, CPG As a security towards …………………………, shall be required to furnish a Performance Guarantee from a nationalised bank at Delhi or from place of accepting authority, in the form ……………………………………………… from the date of Letter/Notice of award. As a security towards ………………………………………………, shall be required to furnish a Performance Guarantee from a Reputed Commercial Bank/ Financial Institution i.e. IFCI, ICICI, IDBI acceptable to POWERGRID (All Banks/ Financial Institutions except Public Sector Indian Banks shall have Overall Corporate Rating or Long term Debt rating not less than A(-) (A minus) from reputed credit agency), in the form ……………………………………………… from the date of Letter/Notice of award.

5 Cl. 27.6, Sec.- GCC, Owner Issued Materials For the maximum quantity ……………………… shall furnish to the Owner, at its own cost, a bank guarantee for an amount of Rs. ** For the maximum quantity ……………………………………………… shall furnish to the Owner, at its own cost, a bank guarantee from a Public Sector Indian Bank or from a Reputed Commercial Bank/ Financial Institution i.e. IFCI, ICICI, IDBI acceptable to POWERGRID (All Banks/ Financial Institutions except Public Sector Indian Banks shall have Overall Corporate Rating or Long term Debt rating not less than A(-) (A minus) from reputed credit agency) for an amount of Rs. **

6 Cl. 67.3, Sec.- GCC, Loans If for any reason, ……………………………… prior to such removal, a bank guarantee acceptable to the Corporation for the amount …………………………… the loan outstanding with interest. If for any reason, ………………………....................……………………… prior to such removal, a bank guarantee from a Public Sector Indian Bank or from a Reputed Commercial Bank/ Financial Institution i.e. IFCI, ICICI, IDBI acceptable to POWERGRID (All Banks/ Financial Institutions except Public Sector Indian Banks shall have Overall Corporate Rating or Long term Debt rating not less than A(-) (A minus) from reputed credit agency) for the amount ……………………………………………… the loan outstanding with interest.

AMENDMENT NO. - II

(AMENDMENT NO.-II (CC) TO CONDITIONS OF CONTRACT FOR "CIVIL WORKS" CONTRACT

(DOCUMENT CODE NO.: DC-5010-JULY'1992)

S.No. CLAUSE/ SEC./ EXISTING CLAUSE AMENDED AS

1 Cl. 14.1, Sec.- GCC, CPG As a security towards …………………………, shall be required to furnish a Performance Guarantee from a Reputed Commercial Bank/ Financial Institution i.e. IFCI, ICICI, IDBI acceptable to POWERGRID (All Banks/ Financial Institutions except Public Sector Indian Banks shall have rating not less than A(-) (A minus) from reputed credit agency), in the form ………………………………………… from the date of Letter/Notice of award. As a security towards ………………………………………………, shall be required to furnish a Performance Guarantee from (a) a Public Sector Bank or (b) a Scheduled Indian Bank having paid up capital (net of any accumulated losses) of Rs. 100 Crores or above (the latest annual report of the Bank should support compliance of capital adequecy ratio requirement) or (c) any foreign Bank or subsidiary of a foreign Bank with overall international corporate rating or rating of long term debt not less than A(-) (A minus) or equivalent by reputed rating agency) in the form ……………………………………………… from the date of Letter/Notice of award.

2 Cl. 27.6, Sec.- GCC, Owner Issued Materials For the maximum quantity ..…………………… shall furnish to the Owner, at its own cost, a bank guarantee from a Public Sector Indian Bank or from a Reputed Commercial Bank/ Financial Institution i.e. IFCI, ICICI, IDBI acceptable to POWERGRID (All Banks/ Financial Institutions except Public Sector Indian Banks shall have rating not less than A(-) (A minus) from reputed credit agency) for an amount of Rs. ** For the maximum quantity ……………………………………………… shall furnish to the Owner, at its own cost, a bank guarantee from (a) a Public Sector Bank or (b) a Scheduled Indian Bank having paid up capital (net of any accumulated losses) of Rs. 100 Crores or above (the latest annual report of the Bank should support compliance of capital adequecy ratio requirement) or (c) any foreign Bank or subsidiary of a foreign Bank with overall international corporate rating or rating of long term debt not less than A(-) (A minus) or equivalent by reputed rating agency) for an amount of Rs. **

3 Cl. 67.3, Sec.- GCC, Loans If for any reason, ……………………………… prior to such removal, a bank guarantee from a Public Sector Indian Bank or from a Reputed Commercial Bank/ Financial Institution i.e. IFCI, ICICI, IDBI acceptable to POWERGRID (All Banks/ Financial Institutions except Public Sector Indian Banks shall have rating not less than A(-) (A minus) from reputed credit agency) for the amount ……………………………………………… the loan outstanding with interest. If for any reason, ……………………………………………… prior to such removal, a bank guarantee from (a) a Public Sector Bank or (b) a Scheduled Indian Bank having paid up capital (net of any accumulated losses) of Rs. 100 Crores or above (the latest annual report of the Bank should support compliance of capital adequecy ratio requirement) or (c) any foreign Bank or subsidiary of a foreign Bank with overall international corporate rating or rating of long term debt not less than A(-) (A minus) or equivalent by reputed rating agency) for the amount ……………………………………………… the loan outstanding with interest.

AMENDMENT TO - III TO CONDITIONS OD CONTRACT FOR CIVIL WORKS (DOMESTIC)

(DOC. CODE NO. DC - 5010 - JULY 1992)

1 Cl. 28.4, Section - GCC The Contractor shall in respect of labour employed by him or his sub-contractors comply with or cause to be complied with the Contractor, Labour Regulations in regard to all matters provided therein. During continuance of the contract, the Contractor and his sub contractors shall abide at all times by all applicable existing labour enactments and rules made thereunder, regulations, notiifications and byelaws of the State or Central Government or local authority and any other labour law (including rules), regualtions, byelaws that may be passed or notification that may be issued under any labour law in future either by State or the Central Government or the local authority. The employees of the Contractor and the Sub-contactor in no case shall be treated as the employees of the Owner at any point of time.

2 Cl. 28.5, Section - GCC The Contractor shall comply with the provisions of the payment of Wages Act, 1936, Minimum Wages Act, 1948, Employers Liability Act, 1938. Workmen's Compensation Act, 1923 or Employees State insurance Act 1948 (Wherever made applicable by appropriate Government) Industrial Disputes Act, 1947, Maternity Benefit Act, 1961 and interstate Migrant Workmen (Regulation of Employment and conditions of service) Act 1979, Mines Act 1952, Contract Labour Regulation & Abolition Act 1970, or any modifications thereof or any other law relating thereto and rules made thereunder from time to time. Clause No. 28.5 The Contractor shall comply with the provisions of Workmen’s Compensation Act 1923, Payment of Gratuity Act 1972, Employee P.F. and Miscellaneous Provision Act 1952, Maternity Benefit Act 1951, Contract Labour (Regulation & Abolition) Act 1970, Minimum Wages Act 1948, Payment of Wages Act 1936, Equal Remuneration Act 1979, Payment of Bonus Act 1965, Industrial Disputes Act, 1947, Industrial Employment (Standing Orders) Act 1946, Trade Unions Act 1926, Child Labour (Prohibition & Regulation) Act 1986, Inter State Migrant Workmen (Regulation of Employment and Conditions of Service) Act 1979, The Building and Other Construction Workers (Regulation of Employment & Conditions of Service) Act 1996 & the Cess Act of 1996, Factories Act 1948, Employers’ Liability Act 1938, Employees State Insurance Act 1948 (wherever made applicable by appropriate Government) and Mines Act 1952, or any modification thereof or any other law relating thereto and rules made thereunder from time to time.

A) The Contractor shall be liable to pay his contribution and the employees contribution to the State Insurance Scheme in respect of all labour employed by him for the execution of the Contract, in accordance with the provision of "The Employees State Insurance Act, 1948" as amended from time to time. In case the Contractor fails to submit full details of his account of labour employed and the contribution payable, the Engineer-in-charge shall recover from the running bills of Contractor an amount of contribution as assessed by him. The amount so recovered shall be adjusted against the actual contribution payable for Employers State insurance. Clause No. 28.5.1 The Contractor shall be liable to pay his contribution and the employees contribution to the State Insurance Scheme in respect of all labour employed by him for the execution of the Contract, in accordance with the provision of “The Employees State Insurance Act, 1948” as amended from time to time. In case the Contractor fails to submit full details of his account of labour employed and the contribution payable, the Engineer-in-charge shall recover from the running bills of Contractor an amount of contribution as assessed by him. The amount so recovered shall be adjusted against the actual contribution payable for Employer State insurance.

3 Cl. 28.6, Section - GCC The Engineer-in-Charge shall (on a report having been made by an Inspecting Officer as defined in the Contractors Labour Regulations) have the power to deduct from the moneys due to the Contractor any sum required or estimated to be required for making good the deficiencies or inadequacies of the provisions made against those which are required under the Labour Regulations resulting in suffering by a worker or workers by reason of non-fulfillment of the Conditions of the Contract stipulating the benefits to workers, non-payment or wages or of deductions made from his or their wages which are not justified by the terms of the Contract or non-observance of the said Contractors Labour Regulations. If the Owner is caused to pay under any law as Principal Owner such amount as may be necessary to cause or observe, or for non-observance of the provisions stipulated in the Notifications/Bylaws/Acts/Rules/Regulations including amendments, if any, on the part of the Contractor, the Owner shall have the right to deduct any money due to the Contractor under this contract or any other contract with the Owner including his amount of performance security for adjusting the aforesaid payment. The Owner shall also have right to recover from the Contractor any sum required or estimated to be required for making good the loss or damage suffered by the Owner.

4 Cl. 28.7, Section - GCC The Contractor shall indemnify the Corporation against any payments to be made under and for observance of the Regulations aforesaid without prejudice, to his right to claim indemnity from his sub-contractors. The Contractor shall keep the Owner indemnified in case any action is taken against the Owner by the competent authority on account of contravention of any of the provisions of any Act or rules made there under, regulations or notifications including amendments.

AMENDMENT NO.-IV DATED 09.03.2005 TO CONDITIONS OF CONTRACT FOR CIVIL WORKS (DOMESTIC)

(DOCUMENT CODE NO.: DC-5010-JULY 1992)

S.No. Clause Reference Existing Clause Amended as

1 Cl. 67.0 - Loans [67.1] 67.0 Loans 67.0 Loans

67.1 Loans will, subject to availability of funds and, if required by the Contractor, be given as under within six weeks of submission of application by him subject to other conditions being fulfilled and the Engineer-in-charge certifying the sum to which the Contractor is entitled by way of loan. 67.1 Loans will, subject to availability of funds and, if required by the Contractor, be given as under within six weeks of submission of application by him subject to other conditions being fulfilled and the Engineer-in-charge certifying the sum to which the Contractor is entitled by way of loan.

In case of Contracts valued at under Rs. 20 lakhs. In case of Contracts valued at under Rs. 20 lakhs.

a) for plant and equipment specifically acquired for the work and brought to Site, at 75% of the purchase price of new machinery; against production of documents in support thereof and subject to the condition that the Engineer-in-charge considers the price reasonable and that such plant and equipment are necessary for the Works and not in excess of requirements and are hypothecated in favour of the Corporation in the form required by the Corporation. Interest on the sum outstanding shall be levied at the percentage mentioned in Schedule 'A'. a) for plant and equipment specifically acquired for the work and brought to Site, at 75% of the purchase price of new machinery; against production of documents in support thereof and subject to the condition that the Engineer-in-charge considers the price reasonable and that such plant and equipment are necessary for the Works and not in excess of requirements and are hypothecated in favour of the Corporation in the form required by the Corporation. The interest on monthly outstanding amount will be charged considering the rate of interest as Medium Term Lending Rate of State Bank of India prevailing as on 30 days prior to Bid Opening date.

Loan against plant and equipment shall in no case exceed 6% of the Contract sum. Loan against plant and equipment shall in no case exceed 6% of the Contract sum.

In case of Contracts valued at over Rs. 20 lakhs. In case of Contracts valued at over Rs. 20 lakhs.

b) a lumpsum advance not exceeding 4% of the Contract sum against a guarantee acceptable to the Corporation at the rate of interest mentioned in Schedule-A. The advance shall be utilised for the purpose of this Contract only and for no other purpose. b) a lumpsum advance not exceeding 4% of the Contract sum against a guarantee acceptable to the Corporation for which the interest on monthly outstanding amount will be charged considering the rate of interest as Medium Term Lending Rate of State Bank of India prevailing as on 30 days prior to Bid Opening date. The advance shall be utilised for the purpose of this Contract only and for no other purpose.

Provided that if a request for loan is made by the Contractor against both the aforementioned provisions of this Condition, viz. (a) & (b) the total sum be given as loan shall not exceed 8% of the Contract Sum. Provided that if a request for loan is made by the Contractor against both the aforementioned provisions of this Condition, viz. (a) & (b) the total sum be given as loan shall not exceed 8% of the Contract Sum.

2 Cl. 67.0 - Loans [67.2] 67.2 Recovery of the sums loaned against (a) and (b) above and of interest thereon shall be made by deduction from the on account payments referred to in Condition 64 and as mentioned in Schedule 'A' in suitable percentages in relation to the progress, as fixed by the Engineer-in-Charge, so that all the sums loaned with interest thereon shall be fully recovered by the time work amounting to nearly 80% of the Contract Sum is completed.……………………………………………… 67.2 Recovery of the sums loaned against (a) and (b) above and of interest thereon shall be made on monthly basis by deduction from the on account payments referred to in Condition 64 and as mentioned in Schedule 'A' in suitable percentages in relation to the progress, as fixed by the Engineer-in-Charge, so that all the sums loaned with interest thereon shall be fully recovered by the time work amounting to nearly 80% of the Contract Sum is completed.………………………………………………

3 ANNEXURE-B Page 1 of 3 ANNEXURE-B Page 1 of 3 SCHEDULE-B ANNEXURE-B Page 1 of 3 SCHEDULE-A

4 ANNEXURE-B Page 3 of 3 67.1 Loans DELETED

a) Interest per annum on 18% (Eighteen per cent) sum advanced for purchase of Plant & Equipment

b) Ditto-as lump sum 18% (Eighteen per cent) advance

Recovery of Loans to Monthly be effected

AMENDMENT NO.-V DATED 12.04.2005 TO CONDITIONS OF CONTRACT FOR CIVIL WORKS (DOMESTIC)

(DOCUMENT CODE NO.: DC-5010-JULY 1992)

S.No. CLAUSE/ SEC./ PAGE EXISTING CLAUSE AMENDED AS

1 Cl. 8.0, TAXES, DUTIES & LEVIES, SECTION - GCC ------- Add new clause 8.5 in the General Terms & Condition of Contract, SECTION-GCC. The bidder shall included Service Tax and surcharge/ cess etc. on it as applicable in their quoted bid price and POWERGRID would not bear any additional liability on this account. POWERGRID shall, however, deduct such tax at surce as per the rules and issue necessary Certificate to the Contractor.

AMENDMENT NO. VI DATED 16.01.2006 TO CONDITIONS OF CONTRACT FOR CIVIL WORKS (DOMESTIC)

[ DOC. CODE NO.: DC-5010-JULY 1992]

Sl. No. Clause Reference Existing Clause Amended as

1 Clause No.67.0 67.0 Loans 67.0 Loans

{67.1} 67.1 Loans will, subject to availability of funds and, if required by the Contractor, be given as under within six weeks of submission of application by him subject to other condition being fulfiled and the Engineer-in-charge certifying the sum to which the Contractor is entitled by way of loan. 67.1 Loans will, subject to availability of funds and, if required by the Contractor, be given as under within six weeks of submission of application by him subject to other condition being fulfiled and the Engineer-in-charge certifying the sum to which the Contractor is entitled by way of loan.

In case of Contracts valued at under Rs. 20 lakhs. In case of Contracts valued at under Rs. 20 lakhs.

a) for plant and equipment specifically acquired for the work and brought to Site, at 75% of the purchase price of new machinery; against production of documents in support thereof and subject to the condition that the Engineer-in-charge considers the price reasonable and that such plant and equipment are necessary for the Works and not in excess of requirements and are hypothecated in favour of the Corporation in the form required by the Corporation. The interest on monthly outstanding amount will be charged considering the rate of interest as the Medium Term Lending Rate of State Bank of India prevailing as on 30 days prior to Bid Opening date. a) for plant and equipment specifically acquired for the work and brought to Site, at 75% of the purchase price of new machinery; against production of documents in support thereof and subject to the condition that the Engineer-in-charge considers the price reasonable and that such plant and equipment are necessary for the Works and not in excess of requirements and are hypothecated in favour of the Corporation in the form required by the Corporation. The interest on monthly outstanding amount will be charged at the rate indicated in the Special Conditions of Contract.

Loan against plant and equipment shall in no case exceed 6% of the Contract sum. Loan against plant and equipment shall in no case exceed 6% of the Contract sum.

In case of Contracts valued at over Rs.20 lakhs In case of Contracts valued at over Rs.20 lakhs

b) a lumpsum advance not exceeding 4% of the Contract sum against a guarantee acceptable to the Corporation for which the interest on monthly outstanding amount will be charged consdiering the rate of interest as the Medium Term Lending Rate of State Bank of India prevailing as on 30 days prior to Bid Opening date. The advance shall be utilised for the purpose of this contract only and for no other purpose. b) a lumpsum advance not exceeding 4% of the Contract sum against a guarantee acceptable to the Corporation for which the interest on monthly outstanding amount will be charged at the rate outstanding amount will be charged at the rate indicated in Special Conditions of Contract.The advance shall be utilised for the purpose of this Contract only and for no other purpose.

Provided that if a request for loan is made by the Contractor against both the aforementioned provisions of this Condition, viz. (a) & (b) the total sum be given as loan shall not exceed 8% of the Contract Sum. Provided that if a request for loan is made by the Contractor against both the aforementioned provisions of this Condition, viz. (a) & (b) the total sum be given as loan shall not exceed 8% of the Contract Sum.

AMENDMENT NO.-VII DATED 02.06.2006 TO CONDITIONS OF CONTRACT FOR CIVIL WORKS (DOMESTIC) (DOCUMENT CODE NO.: DC-5010-JULY 1992)

S.No. CLAUSE/ SEC./ PAGE EXISTING CLAUSE AMENDED AS

1 Cl. 2.1, Sec. - NIT / Page 2 Nil Add new Sub-clause 2.1 as given below: "Bids can be submitted by firms from within India including company(ies) registered and incorporated in India as per Companies Act, 1956 barring foreign bidders / MNCs not registered and incorporated in India and those bidders with whom business is banned by POWERGRID."

AMENDMENT NO.-VIII DATED 28.08.2007 TO CONDITIONS OF CONTRACT FOR CIVIL WORKS (DOMESTIC) (DOCUMENT CODE NO.: DC-5010-JULY 1992)

S.No. CLAUSE/ SEC./ PAGE EXISTING CLAUSE AMENDED AS

1 Cl. 64.0, PAYMENT ON ACCOUNT (SECTION-GCC Page 68 Nil Add new clause 64.7 as follows: "64.7 Mode of Payment : All the payments to be made directly to the Contractor under the contract shall be made by POWERGRID through electronic payment mechanism (e-payment) for which necessary details shall be tied up during execution of the contract. However, request for payment to be released through cheque shall be considered on case to case basis and on the merits of the same."

AMENDMENT NO.-IX DATED 19.11.2007 TO CONDITIONS OF CONTRACT FOR CIVIL WORKS (DOMESTIC) (DOCUMENT CODE NO.: DC-5010-JULY 1992)

S.No. CLAUSE/ SEC./ PAGE EXISTING CLAUSE AMENDED AS

The award of work under this Contract will be on Works Contract basis.The Contractor shall be responsible for payment of any such tax levied o the works contract payable under the existing laws and the same shall be reimbursed by the Owner. payable under the existing laws and the same shall be reimbursed by Owner.

3 Clause 8.4,Sec-GCC [Clause 8.0:Taxes,Duties & Levies] Further, sales tax on the turnover in respect of transaction between Contractor and his sub-contractor/vendor etc.shall be liablity of Contractor and shall not be reimbursed by Owner. Further, sales tax/VAT on the turnover in respect of transaction between Contractor and his sub-contrator/vendor etc. shall be liablity of Contractor and shall not be reimbursed by Owner.

4 Clause 26.6, Sec.-GCC [Clause 26.0: Materials] As brought in clause 8.0 and subject to as herein after provided all charges on account of Octroi, terminalor sales tax and other duties on materials obtained for the works from any source (excluding materials supplied by the Corporation) shall be borne by the Contractor. As brought in clause 8.0 and subject to as herein after provided all charges on account of Octroi, terminalor sales tax/VAT and other duties on materials obtained for the works from any source (excluding materials supplied by the Corporation) shall be borne by the Contractor.

AMENDMENT NO.-IX DATED 19.11.2007 TO CONDITIONS OF CONTRACT FOR CIVIL WORKS (DOMESTIC) (DOCUMENT CODE NO.: DC-5010-JULY 1992)

S.No. CLAUSE/ SEC./ PAGE EXISTING CLAUSE AMENDED AS

Clause 8.1, Sec-GCC[Clause 8.0: Taxes,Duties & Levies] All custom duties, exercise duties, sales tax and other levies payable to the Tenderer in respect of transactions between the Tenderer and his vendors/sub-suppliers for procurement of any material, tools and plants etc., shall be included in the Tender price be entertained by the Owner.The rates quoted in the Tender in Bill of Quantities shall be inclusive of all such taxes, duties, import duties,toll,octroi,royalty etc. All custom duties, exercise duties, sales tax / Value Added Tax (VAT)and other levies payable to the Tenderer in respect of transactions between the Tenderer and his vendors/sub-suppliers for procurement of any material, tools and plants etc., shall be included in the Tender price be entertained by the Owner.The rates quoted in the Tender in Bill of Quantities shall be inclusive of all such taxes, duties, import duties,toll,octroi,royalty etc.

3 Clause 8.2,Sec-GCC [Clause 8.0:Taxes,Duties & Levies] sales tax,local tax and other levies in respect of transaction between the Owner and the Contractor under the contract, if any, shall not be included in the aforesaid Tender Price but they shall be indicated separately,if applicable, in their offer and the same will be considered for the purpose of evaluation of the Tender and payment to the Contractor shall be admissible to the extent as payable under the law as on the date of actual Tender Opening . Any subsequent variation in the above taxes, duties & levies or new taxes shall be payable/recoverable as the case may be by the Owner on actual basis on production of documentary evidence. sales tax/VAT,local tax and other levies in respect of transaction between the Owner and the Contractor under the contract, if any, shall not be included in the aforesaid Tender Price but they shall be indicated separately,if applicable, in their offer and the same will be considered for the purpose of evaluation of the Tender and payment to the Contractor shall be admissible to the extent as payable under the law as on the date of actual Tender Opening . Any subsequent variation in the above taxes, duties & levies or new taxes shall be payable/recoverable as the case may be by the Owner on actual basis on production of documentary evidence. The award of work under this Contract will be on Works Contract basis.The Contractor shall be responsible for payment of any such tax levied on the works contract.