Painting to runway PTT N1 N2 loop and S1 loop including desperals and allied work services and grass cutting with allied wk services to Air Field at AF stn Naliya

Amount

M&L for cutting grass manually and removing material from site obtained from cutting / cleaning both sides of runway PTT, taxi track near DTGM board etc.,including removal of material obtained from cutting/removing/ cleaning (both sides) complete all as specified and as directed. Note: The department shall have right to stop the work at any time even in working days due to security point of view. Contractor shall have no claim on this account in later stage. The rate quoted is deemed to be included this element.

M&L for cutting grass mechanically operated grass cutting machine / device of grass height upto 80 mm to 120 mm above slasher wherever required including removal of material obtained from cutting/removing/ cleaning (both sides) up to 100m from the concrete edges etc., complete all as specified and as directed. Note:- Contractor shall arrange his own mechanical slasher (set one tractor and Jungle Jeem) with POL & MT driver. The mechanical slasher shall be in operation from 09.00 AM to 05.00 PM (including lunch break of half an hour at mid day) every day( i .e. all working days ) in week excluding Sunday (Holiday). The department shall have the right to stop the work at any time even in working days due to security point of view. Contractor shall have no claim on this account in later stage. The rate quoted is deemed to be included this element.

M&L for furrowing SGA , ploughing and furrows using Tractor with POL and driver in Technical area whenever is required at Airfield. Note- Contractor shall arrange his own tractor with POL and MT driver. The tractor shall be in operation from 09.00 AM to 05.00 PM (including lunch break of half an hour at mid day) and shall be allowed in all working days. Department shall have the right to stop the work at any time even in working days due to security point of veiw. Contractor shall have no claim on this account in later stage. The rate quoted is deemed to be included this element.

Cleaning of Mud / silt from monsoon drains of girth exceeding 1.0m but not exceeding 2.0 m of any depth, including removal of wild vegetation from there to out side MD land complete all as specified and as directed. Note:- Cost of removal of existing cover slabs of drain and placing on same location after cleaning/removal of mud/slit and vegetation is deemed to be inclusive in the quoted rate. No claim what so ever shall be entertained on this aspect.

M&L for sand filling including mechanical sieving to obtain grain size 1.18mm to 2.36mm as per IS refilling and ploughing of sand in SGA complete all as specified and directed.

Labour for removing existing sand medium from SGA ground and refilling after mechanical screening/seiving to obtain grain size 1.18mm to 2.36mm as per IS and ploughing in same place complete all as specified & directed.

M&L for repairs to concrete slab or pavement by cutting existing damaged portion of rigid pavements, pot holes to trangular/rectangular cross section & removing all broken and loose particles outside the MD land and cleaning the surfaces with compressed air to remove dust, dirt loose particles / sand / foreign material and washing the surfaces with hidrochloric acid solution and making edges by filling with epoxy resin primer & providing necessary from work as required including provision of elastomeric concrete etc,complete all as specified and as directed.

M&L for repairs to existing construction / dummy / expansion joint of pavement and cutting of cement concrete pavements by raking out the old sealing compound from the existing joint to a depth as mentioned below,from top of the joint and disposal of raked out material to a distance not exceeding 50m and cleaning the joints with brushes and then with compressed air and sealing the joints with polyurethane based sealing compound after applying suitable primer as per manufacturers instructionS to bottom and sides of joints including masking tape and backup rod and filler board etc of required size for different joints for the Joint 25-30 mm wide and 40mm deep average complete all as specified and as directed.

All as per item No. 8 here-in-before but Joint 20-25 mm wide and 30mm deep average

All as per item No. 8 here-in-before but Joint 18-20 mm wide and 25mm deep average

All as per item No. 8 here-in-before but Joint 06-12 mm wide and 25mm deep average

M&L for peparation,cleaning and removal of old bituminous/concrete painted surface etc, 10 cm width or grith and applying one coat of white/black,golden,yellow,Runway/Road marking paint, water based ,complete by manual application complete all as specified and as directed. (Make:Shalimar,Johnson & Nicolsan,Berger,Indigo,Dulex, Nerolac Paints (all first GradeOnly)

M&L for peparation of old surfaces of any description and appying two coats of fluorescent paint of high visibility having high reflective/self eluminating finish on solvent based acrylic with fluorescent thinner (colour of paint red, orange and white) complete all as specified & as directed. The pattern of colour shall be dicided by GE.

M&L for preparation,cleaning and removal of old painted surface exc 10 cm width or grith,of Runway controller huts,Arrester barrier huts,Wind sock base & TCP huts and like and applying one finishing coat of synthetic enamel paint of colour white/Black,golden,red, yellow complete all as specified and as directed. (Make:Shalimar,Johnson & Nicolsan,Berger,Indigo,Dulex, Nerolac Paints (all first GradeOnly)

M&L for preparation of old plastered/concrete surface and applying two coats of white wash over ORA portion complete all as specified and as directed.

GPR Construction Co.

Vijay Construction Co

M/s. Shree Shakti Enterprise

Krishna Engineering

GEE CEE ENTERPRISES

NILESH SUBHASH KARALE

NAVIN K LAKHANI

S and G Construction