Laying of 100mm and 150mm dia. DI distribution pipe line under Sundargarh Municipality area

Supplying all labour and T & P for earth work excavation in trenches for pipe line in all kind of soil within 50 m initial lead & 1.50 mtr. Initial lift including rough dressing and breaking of clods to maximum 5 cm to 7 cm & laying in layers not exceeding 0.30 m in depth as per the Direction of Engineer-in-Charge.

Supplying & Laying in trenches Centrifugally cast (SPUN) DUCTILE IRON Pressure Socket & spigot pipe of Class - K7 or K9 with cement mortar lining conforming to I.S. 8329 of the following nominal diameter as per specification, complete for push on rubber gasket jointing.., as per the specification, all complete as per direction of engineer-in-charge ( Earth work in trenches jointing of pipes specials and fitting to be meausred separately) .

100 mm Dia. D.I.Pipe (Class-K-7)

150 mm Dia. D.I.Pipe (Class-K-7)

Supplying of all materials, labour and T&P for laying ir trenches D.I. specials conforming to I.S. specificatior of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete. (excludina earth work in excavation) as per the specifications and directions of Engineer-in charge.

Supplying all labour,T&P, materials and making Push - on joints confirming to IS:3114 - 1994 Centrifugally (Spun) cast iron or Ductile iron pipes using Rubber Gaskets confirming to IS: 5382 of S.B.R quality including testing of joints, etc. all complete as per specification.

100 mm Dia. Joint

150 mm Dia. Joint

Supplying all labour,T&P, materials for laying of M.S.Pipes of all classes of the following outside diameter including one coat priming and two coat enamel painting as per specification complete including cost of M.S. pipe and specials.

114.30mm OD M.S.Pipe (4.50mm thickness)

168.30mm OD M.S.Pipe (4.50mm thickness)

Supplying all labour, materials and T&P for flame cutting through gas cutter and facing of MS plate up to 8 mm thick at worksite as per the direction of the Er-in-charge.

Supplying all labour,T&P, materials for providing joints by welding with two welding beads/pass confirming to IS:816 - 1998 (Fillet welding) to MS Pipes and fittings at site by using welding generator including testing of joints, as per specification and direction of the Er-in-charge.

Suppling all labour and T&P for filling of foundation trenches with excavated materials as per direction of the Engineer-in-Charge.

Supplying all materials Labour & T & P for Fixing Ductile Iron Resilient seated Sluice Valve / NR Valve/ BF Valve with double flanged ends for water works purposes conforming to IS 14846 - 2000 for the following nominal diameters as per specification complete including cost of Sluice valve .(VAG /TALIS/AVK/KIRLOSKAR/IVC/Hawle or equivalent make with approval of the authority)

100 mm dia conforming to (PN-1.6)

150 mm dia conforming to (PN-1.6)

Air Valve.(VAG /TALIS/AVK/KIRLOSKAR/IVC/Hawle or equivalent make with approval of the authority)

100mm dia DI Tamper proof Kinetic Air valve

Construction of sluice valve chamber of following size

Sluice Valve Chamber for 100mm to 150mm dia pipe line of size (0.90m x 0.90m x 1.20mtr)

Supplying all labour, materials and T&P for cutting metalied / asphalt or bituminous / cement concrete road for taking the pipe line through etc all complete as per specification and direction of the Engineer-in-charge.

Cutting metalled road of grannualar course of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately

Supplying all labour, T&P, materials and filling pipe line trench with sand well watered and rammed including cost, carriage, conveyance of the materials to the work site etc. all complete as per the direction of Engineer-In-Charge.

Supplying all labour, T&P, materials and cement concrete (1:3:6) with 40mm. size hard granite Cruser Broken metal including cost, carriage, conveyance of the materials to the work site etc. all complete as per the direction of Engineer-In-Charge.

Supplying all labour, T&P, materials and cement concrete (1:2:4) with 12mm. size hard granite Cruser Broken chips including cost, carriage, conveyance of the materials to the work site etc. all complete as per the direction of Engineer-In-Charge.

Supplying all labour, T&P, materials for construction of R.C.C thrust block including earth work in excavation, back filling in 150mm layers, watering & consolidating, pumping & bailing out water, shoring, strutting & planking as required, disposal of surplus earth, dressing the site etc.all complete as per the direction of the Engineer-In-Charge.

100-150mm dia pipe

Dewatering with using of 5HP disel pump including cost of POL during inter connection and leak repair

100-150mm dia pipe

Conveyance of surplus earth from work site and depositing the excavated materials away from the work site as per the specification and as directed by the the Engineer-in-chrge.

Supplying all labour T&P, materials for installation and testing of water supply service connection to house holds including dismantling of C.C. roads, earth work in all kinds of soil, drilling of D.I. pipes, fittings, fixing of 15mm dia brass / gun metal ferrule cock conforming to IS:2692-1978 with D.I. saddle, laying of 25mm dia ASTM Schedule-80 PVC pipe as required, refilling with excavated materials, repair of damaged portion by C.C. (1:2:4) using 12mm size CBHG chips with adequate curing etc. all complete.