Construction and Providing Great Indian Bustard Soft Release Facility Near Village Bhanada, Tal.-Abdasa, Dist.-Kachchh.

Name of work :-

Construction and Providing Great Indian Bustard Soft Release Facility Near Village

Bhanada, Tal.-Abdasa, Dist.-Kachchh.

It. Qty. Est. Item of work Tendered Rates Unit Total amount

It. Qty. Est. Item of work Tendered Rates Unit Total amount

No. but may according to

be more In Figures In Words esti.Qty.

1 41.90 Excavation for foundation upto 1.5 m depth 157.33 Rupees One Cmt

including sorting out and stacking of Hundred FiftySeven

useful materials and disposing off the Paise ThirtyThree

excavated stuff upto 50 Meter lead.(B) Dense Only

2 21.10 Providing and laying cement concrete 1:3:6 (1- 3347.14 Rupees Three Cmt

Cement : 3- coarse sand : 6- Crushed aggregates Thousand Three

20 mm nominal size) and curing complete Hundred

excluding cost of formwork in (A) Foundation FourtySeven Paise

and Plinth. Fourteen Only

3 8.20 Providing and laying controlled cement concrete 5440.87 Rupees Five Cmt

M-200 and curing complete including the cost Thousand Four

of form work but excluding cost of Hundred Fourty

reinforcement for reinforced concrete work in Paise EightySeven

4 4.30 Providing and laying controlled cement concrete 5786.29 Rupees Five Cmt

M-200 and curing complete including the cost Thousand Seven

of form work but excluding cost of Hundred EightySix

reinforcement for reinforced concrete work in Paise TwentyNine

Sill and Lintel. Only

5 14.70 Providing and laying controlled cement concrete 4659.13 Rupees Four Cmt.

M.200 and curing complete including the cost Thousand Six

of formwork and reinforcement for reinforced Hundred FiftyNine

concrete work in Graded Slab at Floor Level Paise Thirteen Only

with Groves and Finishes as directed.

6 1453.50 Providing TMT Bar FE 500D reinforcement for 77.29 Rupees Kg.

R.C.C. work including bending, binding and SeventySeven Paise

placing in position complete upto floor two TwentyNine Only

7 47.70 Filling available excavated Earth (Excluding 136.92 Rupees One Cmt

Rock ) in trench plinth side of foundation . in Hundred ThirtySix

layer not excluding 20 cm in depth Paise NinetyTwo

consolidation each deposited layer by ramming Only

and watering etc. complete.

8 18.90 Filling foundation and plinth with murrum or 269.75 Rupees Two Cmt

selected soil in layer of 20 cm in thickness Hundred SixtyNine

including ramming watering and consolidating Paise SeventyFive

etc. complete. Only

It. Qty. Est. Item of work Tendered Rates Unit Total amount

It. Qty. Est. Item of work Tendered Rates Unit Total amount

No. but may according to

be more In Figures In Words esti.Qty.

9 18.90 Filling in foundation and plinth with sand in 481.80 Rupees Four Cmt

layers of 20 cm. Thickness including watering Hundred EightyOne

ramming and consolidating etc. completed. Paise Eighty Only

10 39.10 Precast concrete block masonry (including 3771.97 Rupees Three Cmt

quoin blocks jamb blocks closer etc.) with solid Thousand Seven

concrete blocks of approved size made of Hundred

cement concrete 1:3:6 mix (1- Cement : 3 coarse SeventyOne Paise

sand: 6- graded stone aggregates of 20 mm and NinetySeven Only

down grade) in foundation and plinth cement

11 109.10 20 mm. thick sand faced cement plaster on walls 315.69 Rupees Three Smt

upto height 10 meters above ground level Hundred Fifteen

consisting of 12 mm. thick backing coat of c.m. Paise SixtyNine

1:3 (1 cement : 3sand ) and 8 mm. thick Only

finishing coat of cm. 1:1 ( 1 cement :1 sand )

12 98.00 P & L 24" x 24" vitrified 8 mm thick tile 1467.72 Rupees One Smt

flooring over 20 mm (average) base of cement Thousand Four

mortar 1:6 ( 1 cement: 6 coarse sand) on new Hundred SixtySeven

surface or fixing on existing flooring by Paise SeventyTwo

adhesive material including dismentaling of Only

existing flooring and jointed with color cement

slurry including finised with flush pointing &

cleaning the surface etc.complete for antiskit.

13 131.30 Providing and laying Vitrified tiles 8 to 10 mm 1592.40 Rupees One Smt

thick , in skrting risers of steps and dedo on Thousand Five

10mm thick cement plaster 1:3 (1-cement : 3- Hundred NinetyTwo

coarse sand) and jointed with white cement Paise Fourty Only

14 5.10 Providing and fixing window having extruded 1591.87 Rupees One Smt

aluminum Colour Powder Coated section frame Thousand Five

main outer size 95mm x 24mm x 1.17mm @ Hundred NinetyOne

wt.of 0.738 Kg/mt, horizontal Three track Paise EightySeven

member size 92mm x 31.75mm x 1.30mm @ Only

Wt.1.07 Kg/mt, vertical member of size 92mm x

31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt with

sliding shutters of horizontal member size

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt,

vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to

frame as per details etc.

It. Qty. Est. Item of work Tendered Rates Unit Total amount

It. Qty. Est. Item of work Tendered Rates Unit Total amount

No. but may according to

be more In Figures In Words esti.Qty.

15 522.00 Providing and fixing M.S. grills of required 109.08 Rupees One Kg.

pattern to wooden frames of windows etc. with Hundred Nine Paise

M.S. flats at required spacings and frame Eight Only

alround, square or round bars with round headed

bolts and nuts or by screws (A) Plain Grill.

16 55.20 Steel work, welded in built up sections framed 9108.48 Rupees Nine Qtl

work including cutting, hoisting, fixing in Thousand One

position and applying a priming coat of red lead Hundred Eight Paise

paint. (A)In beams and joists, channels angles FourtyEight Only

Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack

rafters, purlins conneted to common rafters and

17 268.40 Painting two coats (including priming coat) on 104.99 Rupees One Smt

new steel and other metal surface with synthetic Hundred Four Paise

enamel paint, brushing to give an even shade NinetyNine Only

including cleaning the surface of all dirt, dust

and other foreign matter.

18 43.30 Providing and fixing pre-cast Rubber Dye / steel 706.32 Rupees Seven Smt.

Dye inter locking concrete block 60mm thick Hundred Six Paise

with grade of concrete M300 pnumatic ThirtyTwo Only

compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and

filling the joint with sand in proper line and

level as per guidlines of IRC : SP 63-2018 etc.

19 109.10 Finishing wall with weather proof exterior 120.26 Rupees One Smt.

emulsion paint on wall surface (two coats) to Hundred Twenty

give an required shape even shade after Paise TwentySix

thoroughly brushing the surface to remove all Only

dirt, and remains of loose powdered

materials.etc complete.

20 2.00 Providing and fixing in position PVC cowlvent 393.04 Rupees Three Each

to pipes (I) 75mm. dia. Hundred

NinetyThree Paise

21 2.00 Providing and fixing PVC SWR Nahni Trap IS 586.27 Rupees Five Each

14735 for drain - 100 mm diameter with jali of Hundred EightySix

the following nominal diameter of self cleansing Paise TwentySeven

desigh with C.I. Scread down or hinged grating Only

including the cost of cutting and making good

It. Qty. Est. Item of work Tendered Rates Unit Total amount

It. Qty. Est. Item of work Tendered Rates Unit Total amount

No. but may according to

be more In Figures In Words esti.Qty.

22 2.00 Providing and fixing 600mm. x 450mm. 859.41 Rupees Eight Each

Bevelled edge mirror of superior glass mounted Hundred FiftyNine

on 6mm. thick A.C. sheet or plywood sheet and Paise FourtyOne

fixed to wooden; lugs with C.P. brass screws Only

23 2.00 Providing and fixing C.P. brass towel rail 616.42 Rupees Six Hundred Each

complete with C.P. Brass brackets fixed to Sixteen Paise

wooden plugs with C.P. Brass screws.(B) FourtyTwo Only

600mm. x 20mm. size.

24 2.00 Providing and fixing screw down bib taps of 158.86 Rupees One Each

following size :(C) Gun metal screw down bib Hundred FiftyEight

tap (I) 15mm. dia. Paise EightySix

25 1.00 Providing and fixing gun metal check or non 663.43 Rupees Six Hundred Each

return fullway wheel valve.(E) 40mm. dia. SixtyThree Paise

FourtyThree Only

26 1.00 Providing and fixing gun metal check or non 420.63 Rupees Four Each

return fullway wheel valve.(C) 25mm. dia. Hundred Twenty

Paise SixtyThree

27 3.60 Providing, laying and jointing in true line and 72.65 Rupees SeventyTwo Rmt.

level 15 mm dia. U.P.V.C. Pipe (SCH-40) line Paise SixtyFive Only

including fittings make or equivalent as

approved by Engineer in charge. Pipe shall be

fixed on the wall with the help of clamp at every

two meter C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

28 15.65 Providing, laying and jointing in true line and 91.84 Rupees NinetyOne Rmt.

level 25 mm dia. U.P.V.C. Pipe (SCH-40) line Paise EightyFour

including fittings make or equivalent as Only

approved by Engineer in charge. Pipe shall be

fixed on the wall with the help of clamp at every

two meter C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

It. Qty. Est. Item of work Tendered Rates Unit Total amount

It. Qty. Est. Item of work Tendered Rates Unit Total amount

No. but may according to

be more In Figures In Words esti.Qty.

29 25.00 Providing, laying and jointing in true line and 148.12 Rupees One Rmt.

level 40 mm dia. U.P.V.C. Pipe (SCH-40) line Hundred

including fittings make or equivalent as FourtyEight Paise

approved by Engineer in charge. Pipe shall be Twelve Only

fixed on the wall with the help of clamp at every

two meter C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

30 38.50 Providing, laying and jointing in true line and 876.90 Rupees Eight Rmt.

level 110mm diameter U.P.V.C. SWR Type B Hundred SeventySix

pipe conforming to IS 13592-1992 with one end Paise Ninety Only

plain and other end socketed with rubbering, &

fitting conforming to ISI 14735-1999 of

approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 110 mm diameter x

mm length x 145 mm high at every 2000 mm

center to center or shall be concealed in walls as

directed including necessary fittings such as

bends, shoes etc. including testing of pies and

jonits and jointed with adhesive solvent cement

including cost of all materials.

31 2.00 Constructing brick masonary chamber for under 2932.93 Rupees Two Each

ground C.I. inspection chamber and bends with Thousand Nine

bricks having crushing strength not less than 35 Hundred ThirtyTwo

kg/cm2 in cm. 1:5 C.I. cover with frame (light Paise NinetyThree

duty) 455mm. x 610mm. internal dimensions, Only

total weight of cover with frame to be not less

than 38kgs (weight of cover 23kg and wt. of

frame 15 kg.) R.C.C. top slab with 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone

aggregates 20mm. 'size) foundation concrete

1:5:10 inside laster 15mm. thickwith

cementmortar 1:3 finished smooth with a

floating coat of neat cement on walls & bed

concrete etc. complete. (i) Inside dimensions,

455mm. x 610mm. and 450 mm. deep for single

It. Qty. Est. Item of work Tendered Rates Unit Total amount

It. Qty. Est. Item of work Tendered Rates Unit Total amount

No. but may according to

be more In Figures In Words esti.Qty.

32 1.00 Constructing Manhole with R.C.C. top slab in 11042.74 Rupees Eleven Each

1:2:4 mix (1-cement :2-coarse sand : 4-graded Thousand

stone aggregate 20mm nominal size) foundation FourtyTwo Paise

concrete 1:3:6 mix (1-cement : 3- coarse sand :6- SeventyFour Only

Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:3 (1-Cement

: 3-coarse sand) finished with a floating coat of

neat cement and making channels in cement

concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-

stone aggregate 20mm nominal size) finished

smooth complete including curing and festing (i)

Inside size 900mm x 1200mm and 1.5M. deep

including C.I. cover with frame size 560mm

diameter total weight of cover and frame to be

not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.)(A) With 230mm thick

walls of brick msonry using brick having

crushing strength not less than 35Kg. /Sq.cm. in

Cement Mortar 1:5 (1- Cement: 5-Coarse sand)

(1) A type depth 0.90 Metre for 150mm

diameter sewer.

33 1000.00 Providing erecting and fixing double coated 3.95 Rupees Three Paise Ltr.

. (ISI) water tank of required capacity each NinetyFive Only

with all necessary fittings and connection etc.

complete on terrace.

34 1.00 Providing and fixing white / Color Europion 6991.22 Rupees Six Each

type WC Panwith seat and lid, CP brass hinges Thousand Nine

and rubber buffers, flushing Valve with fittings, Hundred NinetyOne

Jet spray CI/MS brackets, 40mm dia flush bend Paise TwentyTwo

with fittings and clamps, overflow, arrangement Only

with specials and mosquito proof coupling of

approved municipal design including painting of

fittings and barckets, cutting and making good

the walls and floors wherever requried.

35 2.00 Providing and fixing Big size Color wash basin 4224.83 Rupees Four Each

with single hole for pillar tap with CI or MS Thousand Two

brackets painted. Including cutting holes and Hundred

making good the same including providing & TwentyFour Paise

fixing CP brass waste coupling 32mm dia EightyThree Only

providing & fixing bottle trap, With Granite

Size of 0.75x0.6 Double Side polished With

Rounding Edge, etc. PVC inlet connection

15mm brass screw down stop tap etc. complete.

It. Qty. Est. Item of work Tendered Rates Unit Total amount

It. Qty. Est. Item of work Tendered Rates Unit Total amount

No. but may according to

be more In Figures In Words esti.Qty.

36 1.00 (B) Providing sock pit of 5.00 Cu.M. Volume 3205.04 Rupees Three Each

including excavating and filling brickbats with Thousand Two

dry masonry work at top for 45cm. height Hundred Five Paise

including covering the top with stone including Four Only

providing vatas in C.M. 1:3 with finishing

curing etc. complete as directed.

37 170.00 Providing and fixing PUF Insulated continueous 3146.70 Rupees Three Smt.

sandwich panels for walls of total thickness not Thousand One

less than 50 mm and width 1.0 m made out from Hundred FourtySix

continue line method on automatic plant.Panel Paise Seventy Only

shall have 0.5 mm thick pre coated GI sheet on

both side of Polyurethane Foam confirming to

IS 12436:1988.The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS

14246:1995 and shall have zinc coating of

minimum 120 gsm as per IS:277:1992, 5-7

microns epoxy primer on both side of the sheet

and polyester top coat 15-18 micron.The PPGI

Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during

trasportation.The panels shall be vertically

joined together by tongue and groove joints. The

PU Foam shall be self-extinguishing, fire

retardant type having minimum density of

Kg/Cu.mt.( +, - 2 Kgs) including 0.25 mm thick

craft paper edging on both edges. The panels

shall be fixed to the steel frame structure with

minimum 5mm thick self tapping GI screws of

required length and nos. with minimum spacing

It. Qty. Est. Item of work Tendered Rates Unit Total amount

It. Qty. Est. Item of work Tendered Rates Unit Total amount

No. but may according to

be more In Figures In Words esti.Qty.

38 287.30 Providing, supplying and fixing factory-made 2424.00 Rupees Two Smt.

Cement EPS Sandwich Wall Panels of required Thousand Four

thickness (50mm/75mm/100mm or as Hundred

specified), consisting of two fibre TwentyFour Only

cement/calcium silicate boards on both faces

with cement bonded EPS core, conforming to

relevant standards, complete with tongue &

groove interlocking system. Panels shall be

fixed in position to RCC/steel/masonry

framework using GI channels, brackets, anchor

fasteners, screws, etc., including cutting to

required size, lifting, placing, proper alignment

and plumbing. Joints to be filled with polymer

modified mortar/adhesive, finished smooth with

mesh treatment to avoid cracks, surface made

ready for further finishing

(putty/paint/cladding). The item includes all

materials, labour, T&P, scaffolding,

transportation, handling, jointing, sealing, and

all incidental works complete as per drawings

and instructions of Engineer-in-Charge.

39 98.00 Providing and fixing eco-friendly light weight calcium 1674.15 Rupees One Smt.

silicate false ceiling tiles having Tegular edge & 15 mm Thousand Six

Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per SeventyFour Paise

B.S. 476 part IV, 100% humidity resistance and also Fifteen Only

having thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate tile

shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size

X 595 mm to be laid on true horizontal level suspended

inter locking metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm including both

side) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of 24X38mm made

from 0.30 mm thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24X28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along spaced

between main ‘T’ at 600mm centre to centre to form agrid

of 1200X600mm and secondary cross ’T’ of length

600mm and size 24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle of the

1200X600mm panel to form grid of size 600X600mm

resting on periphery walls/partitions on a perimeter wall

angle pre-coated steel of size (24X24X3000mm made of

0.40mm thick (minimum) sheet

It. Qty. Est. Item of work Tendered Rates Unit Total amount

It. Qty. Est. Item of work Tendered Rates Unit Total amount

No. but may according to

be more In Figures In Words esti.Qty.

with the help of rawl plugs at 450mm centre to centre with

25mm long dry wall screws @ 230mm interval and laying

15mm thick Densified edges light weight calcium silicate

ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting

/making opening for services like diffusers, grills, light

fittings, fixtures, smoke detectors etc., wherever required,

Main ‘T’ runners to be suspended from ceiling using G.I.

slotted cleats of size 25X35X1.6mm fixed to ceiling with

12.5mm dia and 50mm long dash fasteners, 4mm G.I.

adjustable rods with galvanized steel level clips of size

85X30X0.8mm, spaced at 1200mm centre to centre long

main ‘T’ bottom exposed with 24mm of all T-sections

shall be pre-painted with polyester baked paint, for all

heights, as per specifications, drawings and as directed by

engineerin- charge.Note:- Only calcium silicate false

ceiling area will be measured from wall to wall. No

deduction shall be made for exposed frames/opening (cut

outs) having area less than 0.30 sqm. The calcium silicate

ceiling tiles shall have NRC. Value of 0.50 (Minimum)

for Fine fissured/Spintone/Cosmos and 0.75 NRC for

Globe, light reflection 85% noncombustible as per B.S.

476 part IV, 100% humidity resistance and also having

thermal conductivity. 0.043° w/m KC.for the best thermal

40 37.80 Providing and Fixing Solid WPC Decorative 3535.00 Rupees Three Smt.

Door Frame Single Rebate of size 100 mm X 65 Thousand Five

mm and WPC Flush Door Shutter Decorative Hundred ThirtyFive

(Both Side Prelaminated ) 30 mm thick on metal Only

outerframe as with high metal screw holding

capacity , easy to install , water and moiture

resitance , good insulation properties, termite

resitance etc with 3 nos of 125 mm hinges, door,

aldrop, lock,handles stopper as directed by

engineer incharge.

Amount In Rupees ThirtyOne Lakh ThirtySix Thousand Eight Hundred SeventyFive Paise SeventyEight

I/We am/are willing to carry out the work at ................ % above/below percent (Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as

Estimated amount put to tender Estimated amount put to tender

Deduct ……….......% Below Add ……...........% above

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

It. Qty. Est. Item of work Tendered Rates Unit Total amount

It. Qty. Est. Item of work Tendered Rates Unit Total amount

No. but may according to

be more In Figures In Words esti.Qty.

2 The Labour cess will be deduct as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. there fore in R.C.C.

items where the reisa change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Contractor Dy. Conservator of Forest

Kachch West Division