Loading…
Loading…
Tender Value
₹12.4 L
EMD Value
₹24,800
Closing Date
3 Oct 2026, 5:00 pm6d left
Executive Engineer
EXECUTIVE ENGINEER FATEHPUR Division HPPWD FATEHPUR
SH Providing and laying cement concrete pavement at km 6.800 to 6.900 8.400 to 8.410 25 mm thick bituminous concrete at Km 2.500 to 3.000 and construction of V shape drain at R.D. 0.200 to 0.300 Under PDNA 2023.
2026_PWD_144191_2
5818-68 Dated 19-09-2026
Open Tender
Civil Works
Percentage
60 days
Fatehpur
Please refer Tender documents.
21 documents required · 21 mandatory
₹500
₹24,800
24 Sept 2026
24 Sept 2026
5 Oct 2026
24 Sept 2026
3 Oct 2026
24 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling/ wedging out rocks (where blasting is prohibited) as per drawings and MORTH technical specification Clause 304 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty milimeters) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantam of water including cleaning of slush which may arrise out during dewatering as per direction of Engineer-in-Charge, including disposal of surplus materials within all leads and lifts and other incidental. | 15.16 | Per cubic metre | 339.5 | ₹5,146.82 |
| 2 | Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced concrete in open foundation for all type of structure complete of plain cement concrete grade M-10 ( M Ten) nominal mix 1:3:6 ( One cement isto three sand isto six graded crushed/ broken stone aggregate 20mm (twenty millimeter) nominal size in or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work in toe wall as per drawings and M.O.R.D. technical specification Clause 802,803,1202 and 1203 as per the direction of the Engineer-in-Charge . Including carriage of material within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST. | 16.28 | Per cubic metre | 4,590.6 | ₹74,734.97 |
| 3 | Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced concrete in open foundation for all type of structure complete of plain cement concrete grade M-20 (M- twenty) nominal mix 1:2:4 (One cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size in or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and M.O.R.D. technical specification Clause 802,803,1202 and 1203 as per the direction of the Engineer-in-Charge . Including carriage of material within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST. | 92.5 | Per cubic metre | 5,334.75 | ₹4,93,464.38 |
| 4 | Providing and applying primer coat with BITUMEN emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer @ 0.85 Kg. per Sqm. ( Zero point eight five kilograme) per square metre using mechanical means as per M.O.R.D. technical specifications clause No. 502 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST. | 30 | Per square metre | 78 | ₹2,340 |
| 5 | roviding and applying tack coat with BITUMEN emulsion (RS-1)using emulsion distributor on the prepared granular surface treated with primer and cleaned with hydraulic brooms and spraying tack coat at the rate of 0.275 kg (Zero decimal two seven five kilogrammes) per square metre using mechanical means as per MORD technical specifications clause No.503 including hauling of materials in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST. | 1,782 | Per square metre | 26.05 | ₹46,421.1 |
| 6 | Providing and laying 25mm (twenty five millimeter) compacted thick bituminous concrete with Min 40-60 TPH (forty-sixty tonne per hour) hot mix Batch type/Drum type plant with electronic control grading-II using crushed aggregate 13mm (thirteen millimeter) nominal size of specified grading, premixed with bituminous binder VG-30 (Viscosity grade thirty ) @ 5.50% (five decimal five zero percent) of mix weight transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepared surface and rolling complete with smooth wheeled roller 8-10 ( eight to ten ) tonne capacity for initial break down, rolling and vibratory roller 8-10 (eight to ten) tonne capacity or pneumatic tyre roller of 12-15 (twelve-fifteen tonne) with tyre pressure of atleast 0.56MPa (Zero point five six) for intermediate rolling and finish rolling with 6-8 (six to eight) tonne smooth wheeled tandom roller to achieve the desire compaction as per MORTH technical specifications clause 509 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST. | 44.55 | Per cubic metre | 13,852 | ₹6,17,106.6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.92 MB
Tendernotice_2.pdf
PDF • 2.68 MB
Tendernotice_3.pdf
PDF • 1.81 MB
BOQ_214435.xls
BOQ • 0.29 MB
JOB2.pdf
Tender Documents • 6.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .