UNDERTAKING OF ANNUAL UNDERWATER ROUTINE OF IC121

Work Package:

H-01 CLEAN THE MARINE GROWTH WITH WOODEN SCRAPPERS OF IC ON CHOCKS AND WASH WITH FRESH WATER, RUB WITH GRADE 220 EMERY PAPER TO SMOOTHEN THE SURFACE.

H-02 THE UNDERWATER HULL TO BE CLEANED WITH MILD DETERGENT IN WARM WATER AND JOINT INSPECTION TO BE CARRIED OUT WITH IRS SURVEYOR FOR ASCERTAINING THE AREAS WHERE CRACKS & PEELING OF GEL COAT. THE DAMAGED UNDER WATER AREA IDENTIFIED DURING JOINT INSPECTION TO BE REPAIRED AS PER THE REPAIR PROCEDURE SUGGESTED BY SURVEYOR PRIOR PAINTING.

H-03 POST SURFACE PREPARATION, PAINT TO BE APPLIED AS PER THE FOLLOWING SCHEME. APPROXIMATE AREA 40 SQ. MTR. PAINT MANUFACTURER: INTERNATIONAL (M/S AKZONOBEL). PAINT YARD SUPPLY. THE PAINT TO BE APPLIED AS PER PAINT MANUFACTURER AND ADEQUATE HUMIDITY CONTROL METHOD TO BE ADOPTED WHILE PAINTING.

H-04 01 IN NO PASSENGER SEAT UPROOTED FROM BASE NEED TO BE REPAIRED. THE INWAY JOB INCLUDES FABRICATION OF SEAT BASE (MATERIAL AS SAMPLE).

H-05 02 IN NO. WINDOW WIPER CORRODED TO BE REPLACED AS PER SAMPLE.

H-06 BOTH LIFERAFT SECURING ARRANGEMENT BROKEN SAME TO BE RENEWED AS PER SAMPLE THE SECURING POINT TO BE WELDED AND MARINE GRADE SS MATERIAL TO BE USED.

H-07 BOAT TO BE SHIFTED FROM CRADLE/CHOCKS SECOND VERSION PAINTING OF UNDERWATER / HULL COVERED BY CHOCK/ CRADLE BEARING SURFACE 1ST VERSION. RENEWING OF CUSHIONING OF THE CRADLE SEATING AREA TO BE CARRIED OUT PRIOR SHIFTING AND MAINTENANCE AND REPAINTING OF CRADLE TO BE CARRIED OUT.

H-08 PAINTING OF DRAUGHT MARKING STICKERING OF COAST GUARD NAME WITH EMBLEM AS PER SAMPLE.

H-09 ONE TIME HULL SURVEY OF IC BOAT TO BE CARRIED OUT BY IRS CLASS SURVEYOR.

H-10 COLLAR FENDERS OF BOTH SIDE OF CRAFT WITH LIFE LINE TO BE REPAIRED/REPLACED AS PER SAMPLE. THE COLLAR FENDER SAMPLE SHOULD BE APPROVED

H-11 02 IN NOS WOODEN BOX OF D-787 SPARES DETERIORATED TO BE FABRICATED AS PER SAMPLE. MATERIAL MARINE PLYWOOD TO BE USED

H-12 PETROL TANK TO BE CLEANED AND PROVED. ALL INWAY JOBS INCLUDED.

H-13 PETROL TANK PRESSURE TEST TO BE CARRIED OUT IN FITTED CONDITION AND PROVED. ALL INWAY JOBS INCLUDED.

H-14 THE INTERIOR LAGGING OF SKIPPER CABIN DETERIORATED SAME NEED TO BE RENEWED AS PER SAMPLE. IN WAY JOB INCLUDES REMOVAL OF OLD LAGGING AND WIRES AND REINSTALLING OF WIRE PRIOR PASTING OF NEW LAGGING.

H-15 THE AWNING FABRIC IS TORN FROM SEVERAL PLACES SAME TO BE REPAIRED AND NEW CLITS TO BE INSTALLED. APPROXIMATE AREA 50 SQ FT OF AWNING MATERIAL AND 10 CLEATS TO BE RENEWED.

H-16 THE STOWAGE BOXES APPROXIMATE SIZE OF 5X5X3 FT TO BE FABRICATED MATERIAL WILL BE MARINE PLYWOOD.

H-17 THE REPAIR OF ANCHOR AND ANCHOR CHAINCABLE TO BE CARRIEDOUT WHOLE CABLE TO BE LAID DOWN AND OLD PAINT TO SCRAPPED BY WIRE BRUSH.

H-18 AFT PORT SIDE BOLLARD (TWO IN NUMBER ) CRACKED FROM BASE SAME TO BE REPAIRED

H-19 LOAD TESTING OF 04 NOs LIFTING HOOKS TO BE CARRIED OUT

E-01 OBM COVERS ARE BROKEN NEED TO BE REPAIRED AS PER SAMPLE

E-02 THROTTLE SHIFTING CABLE WORN OUT NEED TO RENEWED

L-01 BATTERY BOX COVER HINGES UPROOTED SAME TO BE RENEWED

L-02 WIRING OF NAVIGATION CONTROL PANEL TO BE CHECKED AND RENEWED IF NECESSARY

L-03 CALIBRATION OF SMART CRAFT GAUGES TO BE CARRIED OUT

L-04 PORT ALTERNATOR NOT CHARGING. SUSPECT BATTERY WIRING FOUND DEFECTIVE SAME TO BE REPAIRED /REPLACED AS PER SAMPLE

L-05 NAVIGATION NUC AND MAST HEAD LIGHT NOT WORKING WIRING NEED TO BE RENEWED

L-06 J SHAPE WIRE HOSE UPROOTED NEED TO BE REPAIRED AS PER SAMPLE

L-07 BATTERY CABLE WORN OUT NEED TO BE RENEWED WITH LUGS

L-08 LOUD HAILER NOT WORKING. DEFECT TO BE RECTIFIED AND SYSTEM TO BE PROVED

L-09 WHEEL HOUSE AND FLOOD LIGHT SOCKET NOT WORKING NEED TO BE REPAIRED

L-10 02 IN NOs DC FAN IN W/H TO BE RENEWED AS PER SAMPLE & PROVEDE FOR OPERATION.

OM ENTERPRISE (BID ID -3109423)

JAY CHAMUNDA ENGINEERING WORKS (BID ID -3110817)