Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹7.5 LAccepted-AOC C O ABDUL GANI ISMAIL NALIYA KUTCH PIN 370655 GUJARAT | KACHCHH | GUJARAT | 370655 | L-1 | Accepted-AOC AOC | |
| 2 | L-2₹8.3 L+₹80,319 (10.8%)Rejected-Finance VILLAGE BHANADA TEH ABADASA DISTT KUTCH PIN 370645 GUJARAT | KACHCHH | GUJARAT | 370645 | L-2 | Rejected-Finance Other than Lowest Bidder |
Tender Value
₹7.0 L
EMD Value
₹13,980
Closing Date
4 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Naliya No. 1
GE (AF) Naliya No. 1,
REPAIRS AND REPLACEMENT TO JOINERY AT AIRFORCE STN MOTHALA UNDER GE (AF) NALIYA
2023_MES_618261_2
8913/E8
Open Tender
Civil Works
Item Rate
270 days
Naliya
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (AF) Naliya No. 1
₹13,980
Yes
19 Mar 2024
14 Dec 2023
6 Jan 2024
14 Dec 2023
4 Jan 2024
21 Dec 2023
Amount
Taking down chowkats or frames (without taking of shutter from the frame) not exc. 1.5 Sqm each. Complete all as specified and as directed.
All as per item No. 1 above but exc. 1.5 Sqm but n. exc. 4 Sqm each Complete all as specified and as directed.
Taking down shutter of any description exc 2 Sqm each Complete all as specified and as directed.
Taking down shutter of any description exc. 2 Sqm but n.exc 4.00 sqm each fixing shutter in same opening after replacing frame (frame/chowkats measured & paid under relevant item) Complete all as specified and as directed.
Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each Complete all as specified and as directed.
M&L for 2nd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, Complete all as specified and as directed.
S&F for 2nd class hard wood 35mm glazed and skeleton shutter, open rebated and prepared to receive glass, gauze etc (with out sash bars)including middle stiles overall(top to bottom) , edges of framing plain, chamfered or rounded,fitted with out and retired beads for securing glass etc size of membrane of shutter as specified in SSR part I, Section 8, clause 8.20 (a) Complete all as specified and as directed.
S&F for factory made 35 mm thick plain framed, panelled shutter (two panned/single panel) with lock rail and middle style top to bottom and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The sizes of 2nd class hardwood rail and stiles as per IS 1003 (part I), kiln seasoned and chemically pressure treated Complete all as specified and as directed.
S&F for 35 mm thick flush door shutters, solid core commercial construction with block board core and plywood face panels, commercial type on both sides all as specified and directed
S&F for Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified and as directed.
S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed sheet reinforced with M.S. square tube complete all as specified and directed
S&F for mild steel works for hold fasts conforming to Fe-290 Gde E-165 all as specified and directed
M&L for providing cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) for hold fasts etc all as specified and directed
M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each, and treated with tar or coal tar black paint all as specified and directed
M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each, and treated with tar or coal tar black paint all as specified and directed
S&F for 150 mm long aluminium, anodized barrel tower bolts of extruded section and fixed (ISI Marked) Complete all as specified and as directed.
All as per item No. 16 above but 125 mm long (ISI Marked) Complete all as specified and as directed.
S&F for 300 mm long aluminium alloy, anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed (ISI Marked) Complete all as specified and as directed.
S&F for 100 mm size butt hinges stainless steel and fixed (ISI Marked) Complete all as specified and as directed.
Ditto- all as per serial item No. 19 above but 75 mm size(ISI Marked) Complete all as specified and as directed.
S&F for continuous (piano) hinges, mild steel, 30 mm width flaps (when open), bright finish or electro galvanized (ISI Marked) Complete all as specified and as directed.
S&F for 300 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate Complete all as specified and as directed.
S&F for 150 mm extruded aluminium alloy handles, fabricated type anodized (ISI Marked) Complete all as specified and as directed.
S&F for 100 mm extruded aluminium alloy handles,fabricated type anodized in repair (ISI Marked) Complete all as specified and as directed.
S&F for floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring, fixed in floor (overall length of cover plate 150mm) Complete all as specified and as directed.
S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples/wooden beads Complete all as specified and as directed.
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples/wooden beads Complete all as specified and as directed.
Dismantling boarding, any description fixed in any position with nails Complete all as specified and as directed.
S&F for 25 mm thick flush shutters, solid core commercial construction with block board core and plywood face panels, commercial type one face is covered with decorative face veneer with lipping/frame to match Complete all as specified and as directed.
S&F for 18/19mm thick pre-laminated particle board, inerior grade, prelaminaed one side wih decorative choice laminaion & other side balancing white lamination lamination fixed with screws to timber frame work Complete all as specified and as directed.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel over a coat of pink primer Complete all as specified and as directed.
S&F for anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame, partly glazed with 5.5mm thick tinted glass and partly panelled with 9mm thick both side decorative prelaminated particle board exterior grade including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size, double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing brass pivot, mortice lock vertical type of mild steel 4 levers of size 100mm etc as mentioned here in below complete all as specified and as directed:- (a) Frame (top and side) section - 101.60 x 44.75 x 2.4mm (Section No. 14021) (b) Vertical members of shutter Section-85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section - 83.50 x 44.45 x 2.00mm (Section No 19581) (d) Lock rail (middle member) of shutter Section - 150.00 x 44.45 x 3.00 mm (Section No. 19596) (e) Bottom Members of shutter Section - 150.00 x 44.45 x 3.10mm (Section No. 19584) (f) Glazing clip for securing glass - 0.80 mm thick (Section No. 19370). Note:- Section No. given above are of make Jindal, Contractor may use similar section of other make mention in Appx A.
S&F for powder coated aluminium three track sliding window comprising of one fly proof shutter and two glazed shutters with window frames of size 92mm x 31.63mm x 1.50mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement and with aluminium Deco grill DG/01 7x4.5mm thick, fixed with channel of size 38mm x 12mm x 13mm (Section 8778) complete all as specified and as directed. Notes:- (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item. (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and average width of aperture 1.40mm, fixed with aluminium wire staples shall be deemed to be included in the quoted rate for the item. (iii) Glass filling in panels of glazed shutter shall be 5mm thick tinted sheet glass of approved make and shade/ tint shall be deemed to be included in the quoted rate for the item.
S&F aluminium (powder coated in approved colour) glazed/ gauzed window shutters with frame, side hung type with sash bars, including necessary joining cleats for fixing etc, glazing clips, rubber packing, aluminium anodised snap beading, screws, aluminium (anodised) fittings such as peg stays 150mm long - 01 No, hooks and eyes - 01 Set, hinge type B-21, 100mm long - 01 No, suitable handle - 01 No, locking device, tower bolts 100mm long - 02 Nos. and glazing panels with 5.5mm thick coloured/ tinted glass with rubber beading, glazing clips and gauzing in with stainless steel wire mesh 0.36mm nominal dia of wire with average 1.40mm width of aperture fixed with aluminium 'C' section, with aluminium (anodised) grill made out of 7mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications, complete all as mentioned here in below and as specified and as directed
S&F for Aluminum window/ventilator fixed type with two track of sec 85.00 mm x 31.75mm 1.50 mm thick section No 78687,24758 shutter of sec 18 x 40 x1.25 mm (Sec No 8663/8664/8665) with rubber gasket beading and locking arrangement including taking down etc complete all as specified and as directed Complete all as specified and as directed. Note : Glass shall be measured and paid separetely
S&F in repair for aluminum anodised grill of 7 mm dia rod square, rectangular, circular or similar tupe of shape aperture not exc 7.00 cm in length or width fixed with H or F channel 38 mm x 12 mm x 1.30 mm (Sec No 8778 Make -Grill No 20 of Decoare or as approved by Accepting officer complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or metal frame, glazed with putty or fixed with beads complete all as specified and as directed.
S&F for 4 mm thick sheet glass ordinary quality and glazing with oilputty or wooden beads in square n.exc. 0.5 Sqm in each pane complete all as specified and as directed.
All as per item No. 40 above but pinned head complete all as specified and as directed.
S&F in repair magnet type PVC door stopper 30 to 40mm dia fixed with screw behind the door complete all as specified and as directed.
S&F in repair, aluminium (Die cast) body, door closer hydraulically regulated designation No-1, universal type, suitable for door shutters of weight not more than 35 kg complete all as specified and directed
S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.
M&L in repair for Alu door of size exc 1.2 sqm including taking down of alu door and refixing in same opening,including fixing of 6mm dia bolts with threads overall in top,lock and bottom rail section, floor door spring , dead lock and all necessary fitting\fixture complete all as specified and as directed.
Taking down for repair, painting, greasing and maintainence and re-fixing rolling steel shutter of area exc 4 Sqm including welding, riveting, changing of hinges etc if required, making good the disturbed surfaces complete all as specified and as directed.
Taking down for repair, painting, wood rot, framing molding interior and exterior trim door replacement, porches, rails, maintainence and re-fixing panel door and glazed door or flush door of area exc 1.5 sqm but n exc 4 Sqm including welding, riveting, changing of hinges etc if required, making good the disturbed surfaces complete all as specified and as directed.
S&F in repair 25 mm dia aluminium anodised curtain rod cut to length and fixed including brackets, stops, roller etc complete all as specified and as directed.
S& F in repair Mortice lock in aluminium doors complete all as specified and as directed.
SHREE MOMAY CONSTRUCTION
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .