Final phase of Realignment and Stabilization of 11 kV Sumbal feeder along the canal at 105 MW (3x35) USHP-II, Kangan HEP

Amount

Supply, Installation, Testing and Commissioning of

9 Mtr. Long Steel Tubular Pole (410 SP33) along with 75 mm piece of 75x40x6 mm galvanized channel for Earthing arrangement and 350x350x5mm MS Base Plate and Pole cap as per technical specifications in SBD

11 Mtr. Long Steel Tubular Pole (410 SP56) along with 75 mm piece of 75x40x6 mm galvanized channel for Earthing arrangement and 350x350x5mm MS Base Plate and Pole cap as per technical specifications in SBD

GI V cross-arm (75x40mm) with top Bracket including clamp as per drawing in SBD

GI Channel X-arm (75x40mm) including clamps and Angle Iron braces

Laying, fixing, stringing of 100 mm² ACSR Conductor (To be provided by JKPDC)

50 mm² HT Aerial Bunched Cable (3x50 + 1x70 mm²) as per technical specifications in SBD

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm as per technical specifications in SBD

11kV Polymeric composite Disc Insulator 12kV, min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm as per technical specifications in SBD

Galvanized Nuts and Bolts

Anti-Climbing Device with Clamps

Danger Plates with Clamps

11kV GO, Air Break Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type with Polymeric Insulator as per technical specifications in SBD

Earthing Complete by GI Pipe 40 mm 3mtr long through GI Strip 25x3 mm as per Drawing in SBD

Red Oxide Paint

Aluminium Paint

Cement bottoming 1:2:4 mix as per Drawing attached in SBD

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6) mm, nut-bolts, 2 Nos turn- buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

SHEIKH ELECTRICALS