Umedubakhal Water Supply Rikhinikhal Block Under Pauri Division

Rates for Supplying ,carting , laying and jointing of G.I pipe (M) , Source work ,Reservoir& Providing Functional House Hold Tap Connection (FHTC) for appropriate & qualitative drinking water for each house hold and all other appurtenant works etc complete UMEDUBAKHAL water Supply scheme Under RIKHINIKHAL blocks in District Pauri. All rates shall be included all types of taxes and G.S.T. It is necessary the contractor will start the work from source to Distribution System. If any dispute in the source than other work will not done by the contractor

Repair, testing & commissioning of water treatment plant of slow sand filter including supplying and filling plinth, cartage by truck and mule, cleaning of treatment plant and plastering and painting of existing water treatment plant (as per detail attached)

Supply of all materials, labour, T&P etc and construction of R.C.C. CWR of following capacities ( in kiloliters ) with M.S. ladder outside & inside of the tank, M.S. M.H. cover with locking arrangement, supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. RCC CWR 5.0 KL

RCC CWR 7.5 KL

RCC CWR 25.0 KL

Supply and fixing of Bucket type chlorinator of 25 Liter capacity at top of all service raservoirs.

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW YST 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete. MSERW Pipe Yst 210 100 mm dia 4.8 mm thick

MSERW Pipe Yst 210 80 mm dia 4.8 mm thick

MSERW Pipe Yst 210 65 mm dia 4.8 mm thick

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I. medium screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete. 15 mm dia (For FHTC)

20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

Excavation of earth for pipeline trench in following strata lift upto 1.5 m lead upto 30 m including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60 m from trenches including supply of labour, T & P etc.all complete assuming that 90% pipe line is laid in trenches, it is estimated that 95% excavation will be in soil mixed with shingle, bajari and boulders and rest 5% will be in medium rock (trench 0.60 wide and 0.60 deep) Soil Mixed with boulder and bajari

Medium Rock

Constructing masonry chamber 60 x 60 x 75 cm inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse) for sluice/air valve, with C.I. surface box 100 mm as per standard design

Supply of all materials, labour, T & P etc. and Construction of BPT as per type design (1.0 x 1.0 x 1.0 m)

Supply of all materials, labour, T & P etc. and Construction of R.C.C 1:1.5:3 Anchor Block (0.75 m x 0.75 m x 0.75 m) as per type design complete

M.S. Iron work in anchor/thrust blocks

P/F of C.I. Air valve (screwed) in position including all material labour, T&P etc complete. 15 mm dia

Painting of MSERW Pipes with 2 coats of approved quality. (Anti-Corrosive paint over one coat of Primer) (Dia of pipe in mm) 100 mm dia

80 mm dia

65 mm dia

Supply of all materials, labours, T&P etc and construct of briddle path along the alignment of rising main for cartage of rising main and later on for effective maintenance.

Supply and fixing of the following fittings including cartage of materials, labour, T&P etc. complete Gate/Wheel Valve ( Brass )/G.M.Valve 20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

Making Ferrul connection with the M.S./Galvanised mains fixing ferrul, washer, stop cock etc. Upto 25 mm nominal dia

Brass ferrul 15 mm with C.I. mouth cover

CC Road (Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

PCC 1:2:4 including supply of all materials, labour, T&P etc. complete (For Re-construction of cc road at different places.)

Excavation for foundation in Soil mixed with boulders for protection work

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P etc. complete in Intake work, along the Rising main, Supply/feeder main, distribution system, storage reservior etc

Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls, etc. including supply of all material, labour, T&P etc. complete in Intake work, along the Rising main, Supply/feeder main, distribution system, storage reservior etc

Provision to lay PCC (1:4:8) with cement, sand and 40mm gauge stone ballast in foundation including supply of all material labour T&P etc.

Repair of Filter cum receiving chamber including piping inlet/outlet, valve, shortcerating inside with wire, plastering outside, paint etc.

Repair of BFG cum receiving chamber including piping inlet/outlet, valve, shortcerating inside with wire, plastering outside, paint etc.

Repair of CWR at MPS, IPS & Top CWR including piping inlet/outlet, valve, shortcerating inside with wire, plastering outside, paint etc.

Repair of existing pump house (5.5 m x 5.5 m x 4.5 m) in size including supply of all materials, labour, T&P etc at MPS (as per annexure)

Repair of existing pump house (6.0 m x 5.0 m x 4.5 m) in size including supply of all materials, labour, T&P etc at IPS (as per annexure)

Repair of Duty room at existing pump house (6.5 m x 5.5 m x 4.5 m) in size including supply of all materials, labour, T&P etc at MPS (as per annexure)

Repair of Duty room at existing pump house (6.0 m x 5.5 m x 4.5 m) in size including supply of all materials, labour, T&P etc at IPS (as per annexure)

Electrification work in Duty Room at IPS

Construction of Approach Road at Top CWR

Cartage of Material from foot hill Kotdwar to Site Store at Road head by truck in Pucca & Kachcha Road & also including by head load & stacking of materials (as per annexure)

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete. Suction Pipe/Delivery (65 mm Dia 4.8 mm )

Suction Pipe/Delivery (50 mm Dia 4.8 mm )

Providing & Fixing DI D/F sluice valves confirming to IS 14846-2000 in position including all material, labour, T&P etc complete 50 mm dia.

65 mm dia

Providing and Fixing Woltman type Bulk Water Meter Inline type, flange end with integral mounted display and all necessary fitting etc complete. 50 mm Dia

65 mm dia

SITC of CENTRIFUGAL PUMP, Head - 370 M, Flow - 300 LPM with suitable Motor , 2900 RPM including Supply of fully automatic auto transformer type starter suitable for above motors having airbreak contactors, electroni timer, thermal over load relay, adequate size Aluminum bus bars, copper wound auto transformer and dulywired by copper leads/ wire, lugs, ON/OFF andreset switches and indicators etc. complete in all respects Supply of main piping spair and valves at MPS (as per annexure)

SITC of CENTRIFUGAL PUMP, Head - 180 M, Flow - 155 LPM with suitable Motor , 2900 RPM including Supply of fully automatic auto transformer type starter suitable for above motors having airbreak contactors, electroni timer, thermal over load relay, adequate size Aluminum bus bars, copper wound auto transformer and dulywired by copper leads/ wire, lugs, ON/OFF andreset switches and indicators etc. complete in all respects Supply of main piping and valves comprising of the following at Raw water 65 mm dia CI D/F sluice valve PN-1.0-02 nos. 65 mm dia CS D/F sluice valve class 300 ASA-05 Nos. Following MS pipes, reducers, tapers, bends, tees and other specials required as per site conditions including necessary nos. of nuts and bolts and high pressure packing i-MS Plain pipe of 65 mm dia 4.80 mm thick -6Mtr. ii-MS Plain pipe 65 mm dia 7.1 mm thick-12Mtr. iii-MS DF reducer 65 mm xpump outlet size-1 No. iv-MS DF 90 degree bend 65mm dia-2Nos. v-MS AF 65x65x65mm dia -2Nos. vi- MS Radial TEE 65x65x65-2 Nos. vii-MS flange 100mm dia -6 Nos. ix-MS flange 100mm dia -12 Nos. x-MS DF 90 degree bend 65mm dia - 2 Nos xi-MS Blind flange for 65 mm dia for delivery line -1 Nos.

Main LT Panel at MPS & IPS Three (3) phase and neutral 415V, 4 wire, 50Hz Indoor type, wall mounting, with bottom cable entry, Single Front door type made of 2 mm thick MS sheet with enclosure door of 16 SWG MS sheet (minimum), with IP-42 degree of protection after seven tank Process and painting with Epoxy Powder coating and equipped with following switchgears/ fixtures etc and necessary side supports to fix the panel on the wall on four sides. The panel shall have Short circuit withstanding capacity of 31.5 kA for 1 sec equipped with the switch gears as mentioned below. The panel shall be got fabricated from manufacturers with CPRI Test certification only.

1100 V grade XLPE insulated PVC sheathed GI flat armoured 'Aluminium conductor' power cable (A2XFY) of the following sizes as per enclosed detailed specifications and IS 7098 (Part-1). 4C x 25 Sq.mm. (A2XFY)

3C x 25 Sq.mm. (2XWY)

1100 V grade XLPE insulated PVC sheathed GI round wire armoured 'Copper conductor' power cable of the following sizes as per enclosed detailed specifications and IS 7098 (Part-1). 3C x 4 Sq.mm. (2XWY)

3C x 2.5 Sq.mm. (2XWY)

Cable dead end termination kit with double compression brass glands, Aluminium lugs and tape as required for 1100 V grade XLPE insulated PVC sheathed GI flat armoured Aluminium conductor power cable of the following size : 4C x 25 Sq.mm.

3C x 25 Sq.mm.

Cable dead end termination kit with double compression brass glands, Copper lugs and tape as required for 1100 V grade XLPE insulated PVC sheathed GI round wire armoured Copper conductor power cable of the following size : 3C x 4 Sq.mm.

3C x 2.5 Sq.mm.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and erecting approved make, standalone solar LED street light system with tubular pole, polyacryline PV panel solar tubular battery. Battery box pole and mechanical hardware with 30 watt LED lamp

Wall Mounting Pin type holder for 1x12 W LED Bulb

20W LED Tube Light for Indoor Lighting

12 W LED Bulb for Indoor Lighting

4 way Modular Type Switch Board for control of Indoor Lighting

Wall Mounting Double Door 6 way SPN Lighting Ditribution Board including 1 no. 32A, DP, 10kA MCB (1No) and 16/10A, SP, 10kA, MCB (6Nos) for control of Indoor Lighting

6 Amp 3/5 Pin Socket for Indoor Lighting

6/16 Amp, 3/5 pin Switch Socket with 16 A control Switch for Indoor Lighting

6-10 A Modular Type Control Switch for Indoor Lighting for control of Indoor Lighting

300 MM Sweep, 950rpm Single Phase Exhaust Fan for Indoor Lighting

Electric Ceiling Fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete as required confirming to IS : 374/1979 with upto date ammendments. (Energy Saver 60 W - 1200 mm sweep)

Wiring with 1.1 KV graded FR PVC insulated ISI marked standard copper conductor wire in existing pipe of following sizes : 4 sq. mm PVC Insulated Cu wire for internal wiring of buildings

2.5 sq. mm PVC Insulated Cu wire for internal wiring of buildings

1.5 sq. mm PVC Insulated Cu wire for internal wiring of buildings

H.G. Conduit 20 mm for building wiring

75 mm dia PVC Pipe with couplers and Bends complete in all respect.

150mm wide, 35mm high, 2mm thick, GI perforated cable tray

12.5 Kg Carbon di oxide type portable fire extinguisher mounted on stands with wheels at bottom complete with fill.

6 Kg Capacity,wall mounted type foam soda acid extinguisher.

Provision of Sign Board

Provision of Material Testing