Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.0 LAccepted-AOC R O PURANA BAZAR KARSOG PO KARSOG TEH KARSOG DISTT MANDI H P 175011 | MANDI | HIMACHAL PRADESH | 175011 | L1 | Accepted-AOC Awarded to M/S Koyla Engineering Works (L-1) which found lowest | |
| 2 | L2₹2.1 L+₹4,961.96 (2.39%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹2.3 L+₹25,537.26 (12.3%)Rejected-Finance V P O KARSOG TEHSIL KARSOG DISTT MANDI HP | KARSOG | MANDI | HIMACHAL PRADESH | L3 | Rejected-Finance L3 |
Tender Value
₹1.9 L
EMD Value
₹4,788
Closing Date
19 Dec 2023, 10:30 amClosed
Office of Sr. Executive Engineer,ED Karsog
Office of Sr. Executive Engineer,ED Karsog
Tender for Augmentation of 100 KVA Sub. Station to 250 KV Sanarli under ESD Karsog.
2023_HPSEB_82538_1
184619/DB/2023-24-6029-35 Dated 05-12-2023
Open Tender
Supply and Erection
Item Wise
60 days
Karsog
Please refer tender document
9 documents required · 9 mandatory
₹590
₹4,788
22 Dec 2023
12 Dec 2023
20 Dec 2023
12 Dec 2023
19 Dec 2023
12 Dec 2023
Augmentation of 100 KVA 22/0.4 KV DTR to 250 KVA
Erection of 250KVA Transformer complete in all respect as directed by Engineer-in charge .
Erection of Lightening Arrestors (3 Nos Lightening Arrestors =1 Set) complete in all respect as directed by Engineer-in charge .
Erection of LT Distribution Box with MCCB complete in all respect as directed by Engineer-in charge .
Erection of Energy meters 100/5 Amp, complete in all respect as directed by Engineer-in charge .
Erection of LT Cable ,complete in all respect as directed by Engineer-in charge
Dismantalling of 100 KVA 22/0.4 KV DTR , LT Distribution Box , LT Tri-Vactor meter , LT Cable etc ,complete in all respect as directed by Engineer-in charge
Mannual Carriage:- Mannual carriage of 250 KVA, 22/.4 KV transformer alongwith allied material for an average lead of 0.200 KM from site of work to road side. (Rate to be quoted for 1 kM lead only)
Mannual Carriage:- Mannual carriage of Dismantalled 100 KVA, 22/.4 KV transformer alongwith allied material for an average lead of 0.200KM from road head to site of work. (Rate to be quoted for 1 kM lead only)
Providing and supply of material at site of work
Prov Panel(Distribution Box LT) ,MS Sheet od 1.6 mm ( 900x800x200 mm ) cubide Box complete with stand etc and Al Busbar (25x6mm)inside .painted /powder coated after primar coating,MCCB 400 amp 3P 50kA , ICS =100 % ICU, MCCB 150AAmp I ,100kA =9 NOS
Prov. Nuts & Bolts 5/8" thick with washer off sizes etc.( M.S Black Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 ) duly fully threaded and Half threaded as per site requirement
Prov. Aluminium Thimble
Prov. Aluminium Thimble
Prov. Chain Link Kencing, Angle Iron, Gate etc. for transformer Fencing. ( As per HPSR )
RCC Foundation for 250 & 400 KVA Transformer
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for:
Foundations, footings, bases of columns, etc. for mass concrete.
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
M/s M.S Electrical and Engineering Works
SATPAL
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .