REPAIR / REPLACEMENT OF AC/CGI SHEET WITH PRE-PAINTED GALVALUME SHEET AND ROOF TREATMENT OF CERTAIN BUILDINGS UNDER AGE B/R-II OF GE(A) BHUJ AT MIL STN BHUJ

Amount

Dismantling asbestos cement corrugated or semi corrugated sheet in roof coverings complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws all as specified and as directed

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge / roof covering/ cladding to wall, fixed with self tapping screws as specified all as specified and as directed.

Excavating in post holes in soft /loose soil (or Similar holes) each not exceeding 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance exceeding 50 m and making good surface all as directed.

M&L cement concrete type C2 (1:3:6) using 40 mm graded stone aggregate as in foundations filling for post holes and mass concrete complete all as directed.

Preparation newly or previously untreated steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide complete all as directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs of RCC roof and histing if required reconnecting and re-fixing in position with replacement of nipple/union/socket check nut of capacity exc 500Ltrs n.exc 1000Ltrs incl cleaning & removing of all scab & dirt etc from tank & from mouths of circulating pipes etc complete all as directed

Cutting chase in brick walls, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealing APP membrane etc and making good, cutting not exc 10cm girth complete all as specified and as directed

M&L for brushing neat cement slurry with 3 Kg/Sqm of cement complete all as specified and directed.

M&L Rendering 10 mm thick of CM 1:4 on concrete roof surfaces is to be finished even and smooth without using extra cement with mixing water proofing compound @3% by weight. complete all as directed.

M&L App based polymeric membrane minimum weight 3.5 Kg/Sqm and Minimum 3 mm thick reinforced with polyester non wove fabric (Wt. not less than 150 gms/Sqm land on primed surface by forced application completed all as specified and directed at site.

M&L cleaning surface and applying two coats of aluminium paint on roof or vertical surfaces complete all as specified and directed.

Supply only Integral WPC complete all as directed. (Make:Pedilite/Roft/Fosroc/Bauchemic India/Cico)

S&F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylindrical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n exc 15cm thickness (below or above ground level) complete all as directed.

M&L Cement concrete ( 1:3:6) type C- 2, using (40mm graded stone aggregate) 75 mm thick as in sub base /plinth protection etc. Finishing cement concrete surface even and smooth without using extra cement complete all as directed.

M&L for cement concrete prepolished coloured chequered tiles 300x300X20 to 25 mm thick over 20 mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified & directed.

M & L for factory made precast machine pressed kerb stones of size 300X300X100mm PCC grade M-15 (design mix)and of shape and size as directed , set jointed and pointed cement and sand mortar (1:4) fixed in repairs with and including necessary excavation and earth work and making good the disturb surfaces to match with the existing surfaces including removal and disposal of rubbish complete all as specified and directed

Material and labour Machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L sand filling under floors or in foundation including watering and consolidation

M & L in repair for Curtain rod, powder coated aluminium alloy of 25mm dia pipe decorative finish with and including supply and fixing powder coated decorated type brackets, stops, rollers etc. fixed on walls with brass screws with PVC rawl plugs as in curtain rods complete all as specified and directed.

S & F in repair 4mm thick designer ceiling board in ceiling fixed with screw as per manufactures instruction, laid on hot dipped galvanized iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white, The frame work shall be comprises of main runner made from 0.33mm thick galvanized steel sheet and of size 24x32x300mm and spaced at 12mm centres fixed to the structural soffits by approved hangers at 1200mm maximum centres complete all as specified and directed.

Taking down cement plaster of any description and in any position of brick or stone wall/concrete surfaces on walls ,ceiling etc including raking out joints ,hacking for key scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed

M&L Rendering 10 mm thick of CM 1:4 on fair faces of brick or concrete surfaces is to be finished even and smooth without using extra cement with mixing of water proofing compound complete all as directed.

M&L Providing and applying cement base plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M/s Bombay Novelty Stores

Ram J. Laljani

Sanjay Enterprise

M/s Naganaray construction Company

zotabrothers