Construction of Khamriya No. 02 (SVS) Water Supply Scheme within Jal Jeevan Mission program under Rudrapur Block

Rates for Construction of Khamriya No. 02 (SVS) Water Supply Scheme including, Supply Installation, testing & commissioning of Rising Main, Distribution System, Construction of OHT all appurtenance work etc. complete within Jal Jeevan Mission program under Rudrapur Block.

Distribution

Providing, Lowering into trenches with true to alignment, Laying & Jointing of full lenghts of HDPE Pipes of specified grade as per IS:4984-1995 and specifications, with testing of pipe line including supply of jointing materials. PE-63 Grade; PN-6.0 (6.0 kg/cm2) 63 mm dia

75 mm dia

90 mm dia

110 mm dia

140 mm dia

160 mm dia

200 mm dia

Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches.

65mm dia

100mm dia

125mm dia

200mm dia

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. :- With F.P.S. bricks

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 coarse sand ) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement: 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3(1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : - With F.P.S. bricks.

Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer in charge - for bituminous road

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer in charge. - for Nominal concrete 1:3:6 or richer mix.

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.

Bulk water meter (Electromagnetic flow meter) based on Microprocessor 150 mm

Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches.

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete. 15 mm dia GI Pipe

Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of G.M. ferrule including tapping the main, but excluding the cost of earth work and cost of all materials. 19.01 Ferrule Connection (Labour cost only)/Connection Ferrule Connection (Labour cost only)

Cost of Material for ferruling in FHTC per connection as Lump Sum

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete. 15 mm dia GI Pipe

Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of G.M. ferrule including tapping the main, but excluding the cost of earth work and cost of all materials. 19.01 Ferrule Connection (Labour cost only)/Connection Ferrule Connection (Labour cost only)

Cost of Material for ferruling in FHTC per connection as Lump Sum

Rising Main

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete. Proposed Tube-well to OHSR. 150mm dia. (6.4 mm Thick)

Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches.

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 carse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. :- With F.P.S. bricks

CONSTRUCTION OF OHT (200 KL)

Supply of all materials, labour, T&P etc and construction of R.C.C. O.H.T. of 200 KL and 13m staging with 1.00m wide R.C.C. stair case from G.L. to balcony and from balcony to top dome 1m x1m R.C.C. landing at suitable locations and railed with 3 rows of 20mm dia G.I. (M) pipe on 65x65x5 mm angle iron posts fixed with ladder, from top to the floor inside of the tank, M.S. M.H. cover with locking arrangement, lightning conductor as per electricity rules, water level indicator, supply and fixing of outlet, inlet, over flow and washout pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex.)/enamel paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2 and staging 13.00 meter

Additional rates for staging per meter height beyond 12m height including cost of all material, labour, shuttering, scaffolding, T&P completed for following capacity (in KL) overhead tank including 1 m additional height. Total staging of 200.00 KL is 13 M. (1 X 0.91 = 0.91 Rs.)

1.5 M HIGH BOUNDARY WALL

Earth work in excavation by manual means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of side and ramming of bottoms, lift upto 1.5 m including getting out the excavation soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

Ist class Brick work 1:6 in foundation including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

Ist class Brick work 1:6 in super structure including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

PC plaster with cement mortar in 1:6 (one cement and six local sand) minimum thickness 12 mm including raking of joint upto 1.27 cm 10 1/2 '' depth and also including supply of all materials labour T&P and require for proper completion of the work

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Centering shuttering including struttings, propping etc. and removal of form work Lean Concrete

3.6 M WIDE M.S. IRON GATE WITH PILLARS

Earth work in excavation by manual means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of side and ramming of bottoms, lift upto 1.5 m including getting out the excavation soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

Ist class Brick work 1:6 in foundation including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

Ist class Brick work 1:6 in super structure including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

PC plaster with cement mortar in 1:6 (one cement and six local sand) minimum thickness 12 mm including raking of joint upto 1.27 cm 10 1/2 '' depth and also including supply of all materials labour T&P and require for proper completion of the work

M.S. work in heavy size such as build up gates doors, frames etc wrought to required from including drilling of holes revanting of welding share necessary and also including supply of steel bolts, nuts etc and their fixing required for proper completion of work

Acrylic smooth exterior paints three coats on pillars

Painting two coats of approved paint over one base (priming coat) on new surface of Gate and Pillars

Centering shuttering including struttings, propping etc. and removal of form work For CC work

E & M WORK AND ACCESSORIES FOR TUBEWELL WORK

Lifting/lowering of 80 mm dia. Column pipe with supply and fixing including nut bolt, rubber packing, submersible cable jointing and NRV repair complete in all respect including cost of materials with all T&P required.

Supply, Installation, Testing & Commissioning on turnkey basis for fully automatic pump automation control pannel of 25 HP capaciy having intelegent unit having" FIELD PROGRAMMABLE LOGIC CONTROLER based SCADA operated pump motor startRun Control Protactagainst faults automatically operated controle and management system" for supervisory control and data acquasition system at pumping water supply schemes & two year freeof cost AMC for warranty period of following dutiesas per specifications sheet enclosed &suaitable for integrationsin the existing system including cartage from works of manufactures up to site of work Capacity of 40 HP

Supply and fixing of 100 Amp TPN main switch 3 phase, 415 volt, 50 H havells make heavy duty double break main switch with HRC fuse making connection at this testing complete work etc at dewala talla tubewell. LNT make.

Main piping and valves as per specification.

Supply of 80mm dia Column pipe, 5.5 mm thick -

Supply and fixing of suitable 16 mm thick MS Flange for column pipe (80mm dia) both end with fixing trangle support and cutting of groove for cable all complete with labour & T&P

80mm dia size column pipe clamps.

Supply of 3 Core flat submersible cable KSB make Conti Cable 3/25.0 sq.mm suitable for Submersible

Tool Kits

Lifting tackle 3 tonne capacity Chain pulley. taparia make

Nut bolts, rubber packing etc.

Electronic type liquid chlorine dosing system.

S.I.T.C. PUMPING PLANTS & ACCESSORIES FOR Tubwell

Spare pump set Submersible pump set, KSB make of 800 LPM, 50 Mt. head suitable for 300mm dia Assembly operating at 3 phase 50Hz AC supply.

Supply installation testing and commissioning of three phase digital rolling contact survo voltage stablizer suitable for unbalance voltage and unbalance load including fixing of proper size copper lugs on input and out put cable both end at defferent sites on turnkey basis including five years cost free maintenance. Input voltage 280-460 volts (phase to phase) capacity - 25 kva

Ashoka