Construction of E M Workshop at Vijayawada Airport SH Electrical works

Amount

Supply of 1.1KV grade 3.5C 95 Sq.mm. armoured aluminium conductor XLPE insulated and PVC sheathed cable conforming to IS - 7098 (Part - I) 1985 respectively with upto date ammendments.

Supply of 1.1KV grade 4C 10 Sq.mm. armoured aluminium conductor XLPE insulated and PVC sheathed cable conforming to IS - 7098 (Part - I) 1985 respectively with upto date ammendments.

Supply of 1.1KV grade 2C 10 Sq.mm. armoured aluminium conductor XLPE insulated and PVC sheathed cable conforming to IS - 7098 (Part - I) 1985 respectively with upto date ammendments.

Supply of 90mm dia HDPE pipe PN4,PE63 ISI marked conforming to IS 4984, Part II and Laying direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective convering with all accessories, cutting, jointing etc. complete as required.

Supply of 40mm dia HDPE pipe PN4,PE63 ISI marked conforming to IS 4984, Part II and Laying direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective convering with all accessories, cutting, jointing etc. complete as required.

Laying of one number XLPE insulated and PVC sheathed power cable of 1.1KV grade of size 35 to 95 sq. mm in the existing RCC/ HUME/ METAL pipe as required.

Laying of one number XLPE insulated and PVC sheathed power cable of 1.1KV grade of size upto 35 sq.mm. in the existing RCC/ HUME/ METAL pipe as required.

Laying of one number XLPE insulated and PVC sheathed power cable of 1.1 KV grade of size upto 35 to 95 sq. mm. in the existing masonry open duct as required.

Laying and fixing of one number XLPE insulated and PVC sheathed power cable of 1.1 KV grade of following size Upto 35 sq. mm (clamped with 1mm thick saddle) on wall surface as required.

Laying and fixing of one number XLPE insulated and PVC sheathed power cable of 1.1 KV grade of size above 35 Sq.mm. and Upto 95 sq. mm (with MS clamp 25x3 flat clamp) on wall surface as required.

Providing, laying and fixing of 50mm dia G.I. pipe (medium class) complete with G.I. fittings for road crossing including bitumin cutting of suitable width of 300mm and depth 750 mm and finished with concrete 150mm thick (1:2:4) etc. as required.

Providing, laying and fixing 150mm dia G.I. pipe (medium class) complete with G.I. fittings for road crossing including bitumin cutting of suitable widthof 300mm and depth 750 mm and finished with concrete 150mm thick (1:2:4) etc. as required.

Supplying and making end termination with single Compression brass compression gland for 3.5C 95Sq.mm. Size PVC/XLPE insulated and PVC sheathed armoured aluminium conductor cable of 1.1kv grade as required.

Supplying and making end termination with single Compression brass compression gland for 4C 10 Sq.mm. Size PVC/XLPE insulated and PVC sheathed armoured aluminium conductor cable of 1.1kv grade as required.

Supplying and making end termination with single compression brass compression gland for 2C 10 Sq.mm. Size PVC/XLPE insulated and PVC sheathed armoured aluminium conductor cable of 1.1kv grade as required.

Supply ,Installtion, Testing And commisioning of Indoor MV Panel completely made up of 14 SWG CRCA sheet steel, door dust tight, vermin proof, totally enclosed, cubicle type, floor mounting, free standing, Confirming to IEC 61439,type tested, including providing and fixing 200A Four Pole Aluminium Bus bar with all accessories suitable for operation at 433 V, 3 phase, 4 wire, 50 Hz, A.C. Power Supply System complete with all accessories, interconnection, connection, earthing, painting, grouting, providing pedastal, Cable Entry provision etc. complete as required and comprising the following:. a. 160A, 36 KA, 4P MCCB with Microprocessor based releases as incomer with R,Y,B,ON, OFF, Trip indication lamps, resin cast CT's with multifuction meter - 2 sets as incomer b. 160A, 4P MCCB Isolator as buscoupler with ON, OFF and three locks two key mechanical interlock- 1 set c. 63A, 25KA, 4P MCCB with microprocessor based releases with ON, OFF, Trip indication lamps as outgoing - 6 Sets. As outgoing d. spare compartments for future outgoing - 4 Nos. without switchgears. with all necessary accessories etc. complete as required.

Providing and Fixing 6 SWG dia G.I. wire for loop earthing along with existing cable as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc.as required.

Earthing with GI earth pipe 4.5 meter long ,40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangemnt and watering pipe etc. with charcoal/coke and salt as required.

Supplying and Fixing Cable Route Marker with Cement concrete 1:2:4 (1 Cement: 2 Coarse Sand : 4 graded stone aggregate 20mm nominal size) of size 50cmx60cm at the bottom and 50cmx50cm at the top with a thickness of 10cm including inscription duly engraved as required.

Supply of 75/80W SMD LED floodlight with pressure die-cast aluminium housing suitable to fix on wall surface,inside canopy highbay application with Refelector IP65 Protection with sealed toughened glass cover,SMD LED with secondary lens, module with driver, etc complete as required. ( Similar to C&S make CORVUS/75W, LTEHB 75WHPLED/LS or equivalent).

Supply of 30W SMD LED floodlight with pressure die-cast aluminium housing suitable to fix on wall surface,inside canopy application with IP65 Protection with sealed toughened glass cover,SMD LED with secondary lens, module with driver, etc complete as required. ( Similar to BAJAJ make BJFL30WLED or equivalent).

Supply of 18 W LED Surface Mounting round LED downlighter with doom shape opal difuser suitable for indoor application. high power LED luminaire PDC Aluminium Housing Downlights suitable to fix on wall surface, LED Luminaire, module with driver, Suitable housing etc complete as required. ( Similar to BAJAJ make BGCML18WH or equivalent).

Supply of 20 W LED batten type T5 tubelight for surface, PC housing with frosted PMMA/PC diffuser, High transmissitivity Elegant and sleek designed LED Batten etc complte as required. (Similar to BAJAJ make BCLAB 20W or equivalent).

Supply of 45W LED Street Light Fitting suitable for operate on 240V, 50Hz, AC Supply housed in pressure Die-Cast/Extruded Aluminium Alloy, Toughened glass with IP66 protection suitable for fixing on pole etc. complete as required. The Fitting shall have separate compartment for LEDs & electronic driver, operating voltage 140-270 V with Surge Protection of 4KV. (similiar to BAJAJ model No. BRTFG 45W LED)

Supply and fixing of Aviation Obstruction Light suitable to operate on 240V, 50Hz complete as required. The Fitting shall have compartment for LEDs & electronic driver, AC Supply Aluminium housing ,Polycorbonate enclosure,, with IP66 protection ,including suitable 1/2 inch mm GI B-class pipe of length 1.5 mtr with reducer and suitable foundation,with 3 Core 2.5 Sqmm PVC insulated flexiable copper cable to nearest switch board. etc as required.(similiar to BAJAJ model No. BGAV302LED)

Installation, testing and commissioning of pre-wired,LED street fitting with 1.5 mtr length , 25mm GI pipe Class B with suitable bend of all types,complete with all accessories etc. directly on wall, including clamps,connections with with 3 Core 2.5 Sqmm PVC insulated flexiable copper cable, and earthing etc.as required.

Installation, testing and commissioning of pre-wired, LED fitting of all types,complete with all accessories etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc.as required.

Installation, testing and commissioning of pre-wired, 30 watt flood LED light fitting on sign board ,complete with all accessories etc. on hanging position so as to illuminate sign board clearly ,clamping ,supports made up of with 25 mm B class GI pipeup to 2.5 Mtr length with suitable bend ,including connections with with 3 Core 2.5 Sqmm PVC insulated flexiable copper cable and earthing etc.as required

Supply of 5 mtr.long hot dipped galvanised iron (HDGI) octagonal pole, made of high tensile steel in single section , top dia of pole 70 mm , bottom dia of pole 130 mm , wall thickness of 3 mm , with suitable pole cap & single arm bracket 1 mtr long 40mm dia for mounting the street light fittings and with 500 mm long weatherproof reinforced bottom door opening , 4 Nos. M16 X 450mm long "J" type EN 8 grade foundation bolts along with templet ,base plate size 200 mm x 200 mm x 12mm thick. as approved by Engineer-In-Charge)

Erection & commissioning of 5 mtr.long hot dipped galvanised iron (HDGI) octagonal pole in shallow foundation at a minimum (600*600*1000)mm with 1:3:6 grade RCC nad top layer finishing with 100 mm concrete layer all arround pole (1 mtr*1 mtr ) by providing & fixing of "J" foundation bolt , hylem sheet for supporting al busbars , 20 Amp rating 4P al bus bar set & 6 Amp SP MCB , mounting the luminaire in the pole making wiring with 3 x 1.5 sq.mm PVC insualted flexiable coper wire from the loop in loop out box to the fitting, as per the Site requirement etc as required.

Supply of Ceiling fan 1200 mm sweep, 5 star rated , Energy Efficient, air delivery - 210CMM complete with 300 mm down road, canopies, shackles, blades, but without regulator suitable to operate on single phase, 230V,50Hz A.C supply etc complete as required .

Supply of heavy duty Exhaust fan of 450mm sweep , 1400 RPM, with minimum power consumption , air delivery-1900 cum/hr, minimum noice including all accessories and suitable to operate on single phase, 230V , 50 Hz A.C Supply, etc complete as required.(Model: Havells TurboJET SP or its equivelent )- FOR WORK AREA

Supply of heavy duty Exhaust fan of 300mm sweep , 900 RPM, with minimum power consumption , minimum noice including all accessories and suitable to operate on single phase, 230V , 50 Hz A.C Supply, etc complete as required.(Model: Havells Turbo Force SP or its equivelent ) - FOR TOILET

Supply and fixing of Wall mounting heavy duty fan with 600 mm size, Energy Efficient, shackles, blades,with suitable speed controller regulator suitable to operate on single phase, 230V,50Hz A.C supply etc complete wiring etc as required - (Model: Havells Turbo Force or its equivelent )

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Numbering of ceiling fan/ exhaust fan/LED fittings as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto(300- 450 )mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supply and installation of Water cooler of capacity 80 lt storage, 60ltrs per hour cooling capacity self contained storage type drinking water cooler suitable for operation on 230 v +/- 10 %, 50 Hz, single phase A.C. supply. Water Cooler with stainless Steel Storage Tank, All the four sides panel fitted with Stainless steel sheet (SS 304), with inbuilt RO,UV, 50LPH and 7 stage purification unit fitted with suitable Compressors with faucets etc..(Make: BLUE STAR Model No: SWCSDLX6080UVROE or equivalent from approved makes).

SITC of Borewell type 7.5HP/5.5KW submersible Pump, 160LPM @90m, water filled cooling type, with SS strainer, SS Body, Noryl Impellers using anti-friction bearing, energy efficient type operated on 415V, 3 Phase,50Hz power for installation into 6' dia borewell complete etc as required. Suitable star/delta starter and conncetions between starter and motor etc as per site requirement. (Make and model :Kirloskar 125HHF0806 or equivalent)

Supply of Flat Three Core X 4.0 Sq.mm PVC insulated & PVC sheathed,Copper conductor Industrial cable of 1.1 KV Grade confirming to IS-694 for Submersible pump motors, complete as required.

Supply of 1.5TR (Minimum ISEER 4.5) Split Inverter Type Air Conditioners with 5 Star Rating, fitted with Hermetically Sealed, Rotary/ScrollCompressors, Operating on Refriegerant R410A eco friendly green gas suitable for floor mounting / wall mounting / ceiling mounting, Conforming to IS:1391 (part-2)/92 (Amdt.1) (Except power consumption norms) suitable for operation on 230 V, 50 Hz, Single Phase, AC Supply capable of performing: Dehumidifying, Air Circulating, Filtering, drain and including supply of refrigerant pipe and drain pipe (up to 3 Meters as per site condition) , Outdoor Unit MS support stand as per site requirement.

Installation of Testing Commissioning of Split AC 1.5 TR / 2 TR including wall cutting, laying of Refrigerant and draing pipe and electrical cable of standard length and making good the wall opening etc. complete as required.

Laying of Extra copper Refrigerant Piping with insulation along with Electrical Cable from Indoor to Outdoor including beyond 3.0 Meters etc. Complete as required as per tonnage requirement of respective split ac Complete as required. . [Suitable for 1.5 TR/2 TR]

Laying of Extra Drain piping using hard PVC of diameter 1/2 inch beyond 3.0 Meters etc. Complete as required.

Supplying and Fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, DP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.-

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required

Supply of 63mm dia HDPE pipe PN4,PE63 ISI marked conforming to IS 4984, Part II and Laying direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective convering with all accessories, cutting, jointing etc. complete as required.

Supplying, installation, testing and commissioning of microprocessor based intelligent addressable main fire alarm panel, central processing unit with the 01 (One loop) modules and capable of supporting not less than 159 devices (including detectors) and minimum 159 detectors and 159 modules per loop and loop length up to 2 km,network communication card, minimum 168 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol Bacnet/ Modbus over IP complete as per specifications.

Supplying, installation, testing and commissioning of Active repeater panel with 320 character/Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.

Supplying, installation, testing and commissioning of intelligent analog addressable photo thermal detector complete with mounting base complete as required.

Supplying, installation, testing and commissioning of intelligent addressable thermal detector with rate of rise cum fixed temperature thermistor complete with base as required.

Supplying, installation, testing and commissioning of addressable manual call point complete as required.

Supplying, installation, testing and commissioning of fault isolator complete with base as required.

Supplying, installation, testing and commissioning of addressable horn cum strobe complete as required.

Supplying, installation, testing and commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover .

Supplying, installation, testing and commissioning of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath .

Supplying, installation, testing and commissioning system sensor Honeywell make beam detector with reflector and monitor module etc, as per site requirement.

switchgearcontrols

DEEPAKELECTRICALS

CHENNAI ENGINEERING SERVICES

Manish Electricals