General Fund

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per the direction of the departmental authorities. For dismantling of Cement Concrete

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per the direction of the departmental authorities. For dismantling of Brick Masonry in Cement Mortar.

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for 300mm dia. Piles.

Under-reaming for Bored cast-in-situ R.C.C. single under reamed piles (SUR) for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for 300mm dia. piles.

Supply and placing of VRCC M20 Grade Design Mix corresponding to Table 9 of IS 456 using 60% of mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate), 350Kgs. of Cement including all operational, incidental and other labour charges such as machine mixing, laying of concrete, vibrating, curing including centering charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work.

for First Floor Columns

for First Floor Roof Slab of 125mm thick

for First Floor Roof Beams

for First Floor Lintels

for First Floor Sunshades (0.075+0.05/2) thick, 0.60m width

for Plinth Beam

Providing High Yield Strength Deformed (HYSD) of SAIL/VSP/TATA (Fe 415/Fe500 grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and typing and lap-splicing with binding wire of 18 SWG, forming frills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental,operational, labour charges such as cutting, bending, placing in position, tying including etc., complete for finished item of work as per S.S.

Brick work in cement motar (1:6) using 2nd class country bricks of size 230x110x70mm including cost and conveyance of all materials and labour charges for mixing of mortar, curing etc., complete as per S.S

Supply and delivery of 40mm thick Precast Cement Jalies of approved size and design including cost and conveyance to work spot etc., complete as directed by the departmental authorities

Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials and labour charges for mixing of mortar, curing etc., complete as per S.S.

Plastering for Celing in CM (1:3) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete as per S.S.

Plastering for walls in CM (1:4) 20mm thick including cost and conveyance of all materials and labour charges for mixing of mortar, curing etc., complete as per S.S.

Providing impervious coat to exposed RCC roof slab surface with CM (1:3) 20mm thick with 1kg of water proof compound per Bag of cement laid over roof when it is green including cost of all materials, including convyenace charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work.

Flooring with vitrified tiles of size 600x600 of 8mm to10 mm thick of 1st quality, set over base coat of cement mortar (1:8) 12mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete for finished item of work as per S.S and as directed by the departmental authorities.

Painting two coats with best quality Plastic emulsion paint Grade-I variety over internal walls to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per S.S and as directed by the departmental authorities.

Painting two coats with best quality Plastic emulsion paint Grade-I over external walls to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per S.S and as directed by the departmental authorities.

Supplying and Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block of 450 x 300mm with Single C.P. Pillar cock including cost and conveyance of all materials to work site and labour charges for fixing in position etc., complete as per S.S.

Construction of 457.2mm x 457.2mm (1'6"x1'6") brick in CM 1:6 proportion masonry Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg. including cost and conveyance of all materials to work site and labour charges for construction and fixing of C.I Frame in position etc., complete for finished item of work as per S.S.

Supply and Fixing of 22.20mm OD Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

Supply and Fixing of 12.7 mm NP Bib tap (Long body) of Indian make heavyduty including cost and conveyance and labour charges for fixing in position etc., complete as directed by the departmental authorities.

Supply and Fixing of following specials of approved make including cost and conveyance to work spot etc., complete as per S.S.

Floor Trap of 76.2 mm-UPVC/SWR Pipe fittings (nahany trap) with Jali

Supply of 25mm PPR Elbow conforming to DIN Standards 8077/8085

Supply of 25mm PPR Tee conforming to DIN Standards 8077/8092.

25mm dia. Nippal.

110mm dia Door Bend 87.5 Degree - UPVC/SWR Pipe fittings

Supply and fixing of 20mm dia. 1.40 to 1.55mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including Hot Dip galvanized 20/18 SWG 12 Module box for switches for Light, Fan and separate plug point including all labour charges etc., complete as directed by the departamental authorities using Sudhakar make pipe.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose and 12 Module Horizontal/ Vertical Cover Frame of recommended brands as per category l covering to switches/ sockets control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings with Modular Accessories as directed by the departamental authorities.

Supply of 7.0W LED Lamp with input voltage 90 to 300V, Color temperature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base of Makes : Phillips / Crompton / Halonix / Phillips / Bajaj / Havells / GM as per the approval of the departmental authorities.

Providing and fixing factory made uPVC white colour casement/Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to Upvc profile),uPVC extruded glazing beads of appropriate dimension,EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle oneach side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent. Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. For Casement door with 3D hinges made of (big series) frame 67x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. The rate including cost of all materials, sundries, transportation to work spot and all labour charges for preparation and fixing in position etc., complete for finished item of work.

Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi- chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage ofwater etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. For Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension. The rate including cost of all materials, sundries, transportation to work spot and all labour charges for preparation and fixing in position etc., complete for finished item of work.

Supply and delivery of 110mm dia. 6 Kg./Sqcm of Sudhakar make Single Socket PVC/SWR pipe including cost and conveyance to work spot etc., complete as per S.S.

Providing and placing on Terrace (at all floor levels) poly ethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance to work spot and all labour charges for placing in position etc., complete as per the directions of departmental authorities.

Supply and fixing of 48" (1200mm) Sweep 5 star rated Ceiling Fan, with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator of Make: Crompton HS Plus / Havells ES PLUS / Orient Energy Star including labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete as directed by the departmental authorities.

Supply and delivery of Quarry dust from approved quarries including cost and conveyance of all materials and labour charges for filling, sectioning, watering and ramming etc., complete as per S.S.

Providing Plain Cement Concrete of M10 Grade using 220Kgs. of Cement, 40mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including cost and conveyance of all materials and all labour charges for machine mixing, laying, tamping of concrete & curing for 14 days etc., complete as per drawings and technical specifications of MORTH.