Providing Drinking water facilities to the Dabbirajupeta village in Vepada mandal of Vizianagaram District

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P,excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%. (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 63 mm dia 6 Kg /Cm² HDPE Pipe-Pumping main

Earth Work excavation and depositing on bank with an initial lead of 10 meters and lift of 2.00 meters in all types of soils except hard rock requiring blasting for pipeline and lowering and laying of H.D.P.E Pipes into trench placing them true to alignment and gradient, jointing the H.D.P.E pipes, specials and fixing of valves with bolts and nuts and rubber packings, filling of pipes with water with an initital lead of 500m and testing the pipeline to the required pressure and make it leak proof, refilling the trench with excavated earth excluding cost and conveyance of pipes and including all other charges 63 mm x 6 Kg/Sq.cm HDPE Pipe (PE 100 Grade) , Trench of size 0.70 x 1.0 m machine (2/3 Machinery & 1/3 Manual)-Pumping main

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P,excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%. (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 63 mm dia 6 Kg /Cm² HDPE Pipe-Gravity Main

Earth Work excavation and depositing on bank with an initial lead of 10 meters and lift of 2.00 meters in all types of soils except hard rock requiring blasting for pipeline and lowering and laying of H.D.P.E Pipes into trench placing them true to alignment and gradient, jointing the H.D.P.E pipes, specials and fixing of valves with bolts and nuts and rubber packings, filling of pipes with water with an initital lead of 500m and testing the pipeline to the required pressure and make it leak proof, refilling the trench with excavated earth excluding cost and conveyance of pipes and including all other charges 63mm x 6 Kg/Sq.cm HDPE Pipe (PE 100 Grade) , Trench of size 0.5 X 0.8m (2/3 Machinery & 1/3 Manual)-Gravity Main

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P,excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%. (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 75 mm dia 6 Kg /Cm² HDPE Pipe-Gravity Main

Earth Work excavation and depositing on bank with an initial lead of 10 meters and lift of 2.00 meters in all types of soils except hard rock requiring blasting for pipeline and lowering and laying of H.D.P.E Pipes into trench placing them true to alignment and gradient, jointing the H.D.P.E pipes, specials and fixing of valves with bolts and nuts and rubber packings, filling of pipes with water with an initital lead of 500m and testing the pipeline to the required pressure and make it leak proof, refilling the trench with excavated earth excluding cost and conveyance of pipes and including all other charges 75 mm x 6 Kg/Sq.cm HDPE Pipe (PE 100 Grade) ,Trench of size 0.7 X 1.0 m (2/3 Machinery & 1/3 Manual)-Gravity Main

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P,excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%. (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 90 mm dia 6 Kg /Cm² HDPE Pipe-Gravity Main

Earth Work excavation and depositing on bank with an initial lead of 10 meters and lift of 2.00 meters in all types of soils except hard rock requiring blasting for pipeline and lowering and laying of H.D.P.E Pipes into trench placing them true to alignment and gradient, jointing the H.D.P.E pipes, specials and fixing of valves with bolts and nuts and rubber packings, filling of pipes with water with an initital lead of 500m and testing the pipeline to the required pressure and make it leak proof, refilling the trench with excavated earth excluding cost and conveyance of pipes and including all other charges 90 mm x 6 Kg/Sq.cm HDPE Pipe (PE 100 Grade) ,Trench of size 0.7 X 1.0 m (2/3 Machinery & 1/3 Manual)-Gravity Main

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P,excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%. (Supply up to 110 mm dia. in coil & above 110 mm dia. straight length.) 110 mm dia 6 Kg /Cm² HDPE Pipe-Gravity Main

Earth Work excavation and depositing on bank with an initial lead of 10 meters and lift of 2.00 meters in all types of soils except hard rock requiring blasting for pipeline and lowering and laying of H.D.P.E Pipes into trench placing them true to alignment and gradient, jointing the H.D.P.E pipes, specials and fixing of valves with bolts and nuts and rubber packings, filling of pipes with water with an initital lead of 500m and testing the pipeline to the required pressure and make it leak proof, refilling the trench with excavated earth excluding cost and conveyance of pipes and including all other charges 110 mm x 6 Kg/Sq.cm HDPE Pipe (PE 100 Grade) ,Trench of size 0.7 X 1.0 m (2/3 Machinery & 1/3 Manual)-Gravity Main

Cut opening of Cement Concrete road surface with concrete saw cutter and removal with breaker etc., including all charges compete, including overheads and controctor's profit @ 13.615% but excluding GST and seignorage charges

CC 1:2:4 concrete mix including cost and conveyance of all materials and labour charges, complete for restoration of Cement Concrete road cutting, including overheads and contractor's profit @ 13.615 %, but excluding GST and seignorage charges

Construction of FHTCs support 90mm PVC 4Kg and CC(1:2:4) including cost and conveyance of all Material and Labour charges etc., complete

'Construction of 60 KL capacity OHSR of 12.95 mts staging with M30 grade design mix at the site selected by the Department, as per drawings and as specified in Technical Specification including earth work excavation in all types of soils in wet or dry conditions for foundations including cost and conveyance of all materials, cost and fabrication of steel, fixtures, labour charges and testing the reservoir for water tightness etc., complete for finished item of work as per the Standard Specifications and as per the provisions made in the SOR . The rate is inclusive of cost of all materials and labour charges and all taxes, duties and levies, etc., complete for finished item of work, but excluding GST and Seigniorage charges, including Overheads and Contractors Profit @13.615% 1). All concrete members shall be designed with M30 grade design mix. 2) Rate is for OHSRs with RAFT FOUNDATION 3) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including bottom of roof. 4) Rate inclusive of 2 coats of whether proof emulsion painting for external surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections including cost of pipes, bends and valves as per departmental designs and drawings. 5) The above rates are applicable for basic wind speed of 200 KMPH . Fixtures include : a) RCC or Aluminium ladder inside 0.60 m wide. b) Spiral staircase on the outside shall be provided upto 200 KL. c) Lightening arrestor, including conductor and earthling etc.,d) RCC ventilators with copper or stainless steel fly proof mesh. e) D.I Manholes frame and cover 0.60x0.60m as per IS specifications (light duty) - 2 Nos. f)Water level indicator of good quality with ebonite/copper float of approved pattern-1 No. g) The railing provided to the gallery and staircase shall be with stainless steel of grade 304 for a height of 1.20m. i) D.I swan neck ventilators shall be provided in top dome and slab. j). Bed Blocks of 0.45m x 0.45m x 0.30m in CC M15 Mix below all the duck foot bends k) The rates are inclusive of CI verticals for all inlet, out let, overflow and scour connections( as per estimate diameters) and D.I valves. All valves near inlet, out let and for scour shall be D.I valves of heavy duty conforming to the specification of SoR item No.30

Construction of Functional Household Tap Connections (FHTC) on 63 mm dia main with 1/2" service connection with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 63mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304 threded insert outlet with threded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm Nominal Bore GI pipe Medium Grade as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth) and 12.7mm dia Brass Bib cock(long body) Indian make heavy duty tap excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%.

Drilling of borewell by Down The Hold hammer (DTH) drilling to a finished dia of 165 mm in all formations suitable for Down The Hold hammer (DTH) such as medium to hard rock formations and all consolidation formations and reaming the bore to suit the insertion of 180 mm & 250 mm PVC 6 kg/cm2 casing pipe including insertion of casing pipe and other relevent materials required upto the depth directed by dept., transportation of the drilling rig and supporting vehicles and including bore development, flushing the borewell at an average pressure of 100 PSI, conducting yield test, crew charges cost of consumables, transportation charges required in fixation of pipe assembly completely all done to the satisfaction of the dept. and as stipulated in the technical conditions enclosed to the schedule but excluding the cost of casing pipe, couplings,caps etc. The entire work should be carried out as per IS:2000 parts I & II of 1979 including Drilling 80 Rmt, 180mm PVC 6Kg/cm2 - 60 Rmt, 250mm PVC 6kg/sqcm-10 Rmt,Slotting charges - 24Rmt, 180mm PVC dia PVC Bore cap and Geological survey charges etc completed etc., Excluding Contract profit and Excluding cost of GST.

Construction of pipelines for water supply with 63mm dia, 6 Kg/Cm2 HDPE PE-100 grade pipes as per IS Specifications, with its latest amendments and revisions thereon, including supplying of pipes, necessary specials such as bends, Tees, etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation 2/3rd machinery and 1/3rd manually for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifications (Part-B,Volume-I) and as per drawing (as per standard drawings). The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding GST and seignourage charges but including Overheads and Contractor's profit @ 13.615%0.50x0.80mt (Trench size on CC road)

I.)Supply, Transportation of fixing of 2.00 HP Single phase submersible mortar pumpset 5 star rated, confirming to ISI mark 60LPM 80M head submersible pumpset suitable to 150mm dia Borewell with high quality, wear resistence and Dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of single phase 230V ,Single phase 50 Hz Ac supply copper winding with water proof insulation and high precision and strength not to be effected by chemical in water and suitable Bronze bearings with nut and bolt , etc complete for 4" Borewell. Makes: Kirloskar/ Crompton/ Texmo/ CRI/ KSB/ Lubi/ PSG/ Aryan Varsha - 1 no, 2) Cable Jointing kit of Submersible motoer- 1Job, 3) Supply of single phase pannel board suitable to 2-3HP- 1No, 4) 40mm HDPE pipe 12.5kg- 60Rmt, 5)supply of SS and GI Niplle Set- 1set, 6)40mm GI pipe- 1.20Rmt, 7)40mm GI Nipples- 4Nos, 8) 40mm GI Union- 1No, 9) 40mm GI Elbow- 3Nos 10) 40mm GM NRV - 1No, 11)40mm GM Gate Valve- 1No 12) Bore cover- 1No 13)40mm MS Clamp Set- 2sets 14) 2.50 sqmm submersible cable - 80Rmt 15)32A cutout - 2Nos 16)7/20 service wire - 25Rmt 17) GI wire- 1kg 18)Shellock Bottles - 2Nos 19)Teflon Tape - 2Nos 20)PVC Insulation tape - 3Nos 21)outdoor MS pannel box with stand - 1No, Earthing charges etc. complete, including contractor profit @13.615%

Construction of 10000 lts capacity Over Head Service Reservoirs of staging 9.40 mtrs. at the site selected by the department including earth work excavation in all kinds of soils in wet or dry conditions for raft foundations with M30 grade design mix and drawings and including cost of materials, fixtures, (1. RCC/Aluminium inside ladder(0.45 mtr wide) 2. Spiral staircase on the outside shall be provided upto 200KL. Above 200 KL capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S hand railing upto 1.0 height. 3. Lightening arrestor including conductor ad earthing etc., 4.RCC finial ventilators with 5.D.I Manholes frame and cover 0.60x0.60 m as per IS specifications(light duty) - 2 Nos. 6. Water level indicator of good quality with ebonite/copper float, approved pattern, copper or stainless steel fly proof mesh. and, 7.The ladder shall be with M.S ladder and Verticals with HDPE of 10kg/Sqcm shall be provided for single column OHSRs only, 8. The railing provided to the gallery and staircase shall be with stainless steel of grade 304 for a height of 1mts, 9. The dog legged staircase shall be enclosed with brick/CRS wall on three sides and front side with M.S collapsible gate upto 1st brace level from ground level to prevent unauthorized entry. 10. D.I swan neck ventilators shall be provided in top dome and slab, 11.All valves near inlet, out let and for scour of ELSRs shall be D.I, valves. The rates are including of all inlet, out let conenction and valves. and inclusive of testing the reservoir for water tightness, three coats of epoxy paint to inner surface of the reservoir including roof dome, including 2 coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, pipes, bends, valves etc., Construct of Valve pits 2No's for pipe connections but including cost of pipes,bends and valves as per departmental designs and drawings etc. complete including contractors' profit of 13.615% for finishing and Excluding GST item of work.

Construction of pipe line for water supply with HDPE pipes as per IS 4984/1988 with its amendments and revisions there on including supply of pipes, fixing of specials and valves, including excavation of trench of size as specified by department for pipe line in all soils except rock including lowering laying and jointing of HDPE pipe line true to alignment and gradient and refilling the trenches with excavated soils (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost and conveyance of all materials, and labour charges including turn over tax, for finished item of pipe line work, but excluding GST and other source to OHSR for Distribution System-63mm Dia -6Kg/cm2 excluding cost of GST and including over haead and contracts profit @ 13.615% (Trench Size 0.7mX1.0m)

Construction of pipe line for water supply with HDPE pipes as per IS 4984/1988 with its amendments and revisions there on including supply of pipes, fixing of specials and valves, including excavation of trench of size as specified by department for pipe line in all soils except rock including lowering laying and jointing of HDPE pipe line true to alignment and gradient and refilling the trenches with excavated soils (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost and conveyance of all materials, and labour charges including turn over tax, for finished item of pipe line work, but excluding GST and other source to OHSR for Distribution System-75 mm Dia -6Kg/cm2 excluding cost of GST and including over haead and contracts profit @ 13.615% (Trench Size 0.7mX1.0m)

Construction of pipe line for water supply with HDPE pipes as per IS 4984/1988 with its amendments and revisions there on including supply of pipes, fixing of specials and valves, including excavation of trench of size as specified by department for pipe line in all soils except rock including lowering laying and jointing of HDPE pipe line true to alignment and gradient and refilling the trenches with excavated soils (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost and conveyance of all materials, and labour charges including turn over tax, for finished item of pipe line work, but excluding GST and other source to OHSR for Distribution System-90mm Dia -6Kg/cm2 excluding cost of GST and including over haead and contracts profit @ 13.615% (Trench Size 0.7mX1.0m)

Construction of pipe line for water supply with HDPE pipes as per IS 4984/1988 with its amendments and revisions there on including supply of pipes, fixing of specials and valves, including excavation of trench of size as specified by department for pipe line in all soils except rock including lowering laying and jointing of HDPE pipe line true to alignment and gradient and refilling the trenches with excavated soils (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost and conveyance of all materials, and labour charges including turn over tax, for finished item of pipe line work, but excluding GST and other source to OHSR for Distribution System-110mm Dia -6Kg/cm2 excluding cost of GST and including over haead and contracts profit @ 13.615% (Trench Size 0.7mX1.0m)

Cutting Open C.C. Road surface Concrete saw cutter and removal with Breaker etc complete for excluding cost of GST and including over head and contracts profit @ 13.615%

CC(1:2:4) mix using 20mm HBG metal including cost and conveyance of all materials and all labour charges Etc.,complete

Construction of FHTCs support including cost and conveyance of all Material and Labour charges etc., complete

Construction of Functional Household Tap Connections (FHTC) on 63 mm dia main with 1/2" service connection with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 63mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304 threded insert outlet with threded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm Nominal Bore GI pipe Medium Grade as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth) and 12.7mm dia Brass Bib cock(long body) Indian make heavy duty tap excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%.

Construction of Functional Household Tap Connections (FHTC) on 75 mm dia main with 1/2" service connection with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 63mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304 threded insert outlet with threded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm Nominal Bore GI pipe Medium Grade as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth) and 12.7mm dia Brass Bib cock(long body) Indian make heavy duty tap excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%.

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS:1538, complete for finished item of work The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, construction of valve chamber but excluding GST and Seigniorge charges as specified in Technical specifications including overheads and Contractor's profit @ 13.615%.

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS:1538, complete for finished item of work The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, construction of valve chamber but excluding GST and Seigniorge charges as specified in Technical specifications including overheads and Contractor's profit @ 13.615%.

Supply & Fixing of Name Board including cost & conveyance of all material and all labour charges etc complete