Supply and Installation of CCTV and Adhar based Biometric Attendance System with Smart card at KHRI, RIQCL, Karyavattom, Thiruvananthapuram.

Amount

PART I- CCTV

Supply and Installation of ≥ 4MP IR Bullet Outoor Camera with ≥30 meter IR Distance, 1/2.8” or better progressive scan Image Sensor, 3.6mm focal length of lens, Signal system NTSC/PAL, Input Power POE and 12v DC, Video Output HD1080P, True day/night (IR-cut filter). Wide Dynamic Range 120DB or better, Video Compression H.265+/H.265/H.264+/H.264, IP 66 rating etc. Camera should support Micro SD/SDHC/SDXC memory card for edge recording and support up to 64GB Capacity. Required certifications and markings such as BIS, UL, FCC, CE, RoHS, etc. Preferred Make: Honeywell, Avtron, Infinova, Tyco, Vantage, Vivotek, Plexonics, Milesight or equivalent

Supply and Installation of ≥ 4MP IR Bullet Outoor Camera with ≥30 meter IR Distance, 1/2.8” or betterprogressive scan Image Sensor, 2.8mm -12mm focal length of lens, Signal system NTSC/PAL, Input Power POE and 12v DC, Video Output HD1080P, True day/night (IR-cut filter). Wide Dynamic Range 120DB or better, Video Compression H.265+/H.265/H.264+/H.264, IP 66 rating etc. Camera should support Micro SD/SDHC/SDXC memory card for edge recording and support up to 64GB Capacity. Required certifications and markings such as BIS, UL, FCC, CE, RoHS, etc. Preferred Make: Honeywell, Avtron, Infinova, Tyco, Vantage, Vivotek, Plexonics, Milesight or equivalent

Supply and Installation of ≥ 4MP IR Bullet Outoor Camera with ≥30 meter IR Distance, 1/2.8” or betterprogressive scan Image Sensor, 2.8mm focal length of lens, Signal system NTSC/PAL, Input Power POE and 12v DC, Video Output HD1080P, True day/night (IR-cut filter). Wide Dynamic Range 120DB or better, Video Compression H.265+/H.265/H.264+/H.264, IP 66 rating etc. Camera should support Micro SD/SDHC/SDXC memory card for edge recording and support up to 64GB Capacity. Required certifications and markings such as BIS, UL, FCC, CE, RoHS, etc. Preferred Make: Honeywell, Avtron, Infinova, Vantage, Vivotek, Plexonics, Milesight or equivalent

Supply and Installation of Network Video Recorder, support ≥ 16 Channel, should support resolution 4 MP IP camera, 4 SATA HDD ports each supports up to 8TB, 25FPS record rate. Should support 1080P/720P IP Camera. H.264/H.265 video compression or better, Network: 2X RJ-45 10/100/1000Mbps Self-adaptive Ethernet Interfaces: VGA, HDMI, USB etc. Required certifications and markings such as BIS, UL, FCC, CE, RoHS, etc. Preferred Make: Honeywell, Panasonic, Samsung, Avatron, Vantage, Vivotek, plexonics, Milesight or equivalent.

Supply and Installation of 6 TB Surveillance Hard Disk Drive. Preferred Make: Barracuda, Seagate, WD or equivalent

Supply and Installation of ≥32" LED Professional Display capable of working 24/7 with resolution of Full HD or higher. OEM warranty for 3 years. Preferred Model: Sony, LG, Samsung or equivalent

Supply and Installation of 16 port Auto sensing 10/100/1000 Mbps Manageble Switch with minimum 14 numbers of Gigabit Ethernet ports and 2 SFP/combo ports with power budget ≥300W. AC 230V power input. Preferred Make: Cisco, Allied Telesis, Brocade, Netgear or equivalent

Supply and Installation of 10 port Auto sensing 10/100/1000 Mbps PoE+ L2 Manageable Switch having minimum 8 PoE+ port, switching capacity ≥ 20Gbps, minimum CPU memory 512 MB with 2 SFP/combo ports, Power budget ≥ 128W. AC 230V power input. Preferred Make: Cisco, Allied Telesis, Brocade, Netgear or equivalent

Supply and fixing 24 port Enhanced CAT-6, 16 port loaded rack mountable modular type patch panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Actassi, Belden,Molex, R&M or equivalent

Supply and Installation of 10/100/1000 Media Converter warranty for 3 years. Preferred Make:- Cisco, Belden, Brocade, Aruba or equivalent

Supply, laying, certification and documentation of weather proof CAT-6 23AWG UTP cable. Preferred Make: Actassi, Belden, Molex, Panduit, R&M, or equivalent

Supply, laying, certification and documentation of weather proof Armored CAT-6 outdoor 23AWG UTP cable. Preferred Make: Actassi, Belden, Molex, R&M, or equivalent

Supply & providing 1 Mtr CAT-6 Giga UTP patch cord. Preferred Make:- Actassi, Belden, Molex, R&M or equivalent.

Supply and Installation of Armored 6 Core single mode Low Water Peak Outside plant (OSP) OFC having LSZH sheath, conforming to ITU-T G.655, IEC 60794-1 : 2001, IS 13882 (Part 1/Sec 1) : 1999 etc. Preferred Make: Commscope, Molex, R&M or equivalent.

Supply and fixing ≥50mm x ≥50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Accessories including External Angle 90°, Flat Angle 90°/TEE, Internal Angle 90°, Internal Coupler, Flat cross, End Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc. Preeferred Make: MK, OBO, Legrand or equivalent

Supply and Installation of 32mm HDPE Pipe for mechanical protection to OFC/Armoured Cables

Excavation for cable trenches in soft soil, depth upto 1.2m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc. in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.

Supply and fixing of 25mm medium gauge PVC ivory conduit with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required Preferred Make: TOMS/BALCO/Espee or equivalent

Supply and fixing of 20mm medium gauage PVC ivory conduit with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required Preferred Make: TOMS/BALCO/Espee or equivalent

Supply and fixing of out door 19” 6U pole mounting Network Rack -- Construction of material 1.2/1.5mm thick CRCA sheet, rack includes a very compact design, welded structure with front accessible. The side panels are integrated type & welded with canopy & bottom cover, rigid frame that can be fixed to the pole, Front door with filter, louver & T type lock 90 CFM, 230V AC Fan – 2 Nos, front door self adhesive thermal foam from inside, 3 socket PDU 5 Amp- 1 No, door hinges - 2nos, cable glance at bottom side for cable entry, Gasket (as per IP 55 standard), pole mounting bracket at rear side – 2 nos, hood for air inlet at front side, powder coated surface, finish: light grey. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent

Supply and installation of Pole with min 6mtr height,100mm diameter, fixed in a concrete footing of min height of 1mtr, properly finished with painting and having 1 meter Copper Alloy based lightning Arrester, clamp, wire with Graphite based chemical compound earthing and min 250 microns copper bonded low carbon steel rod, lightning & surge protection for power supply and environment protected enclosure suitable for the termination of cables etc.

Supply and fixing 19'', wall mount 9U, Network Rack with ACDB 6 port, PDU, PVC slotted cable channel etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.

Supply, Installation, Testing and Commissioning of 2KVA line interactive UPS with one hour battery back up on full load. Warranty 3 year for UPS and 2 year for battery. Preferred Make:- APC, Eaton, Emerson, GE, Socomec or equivalent

Supply and Installation of necessary Electrical accessories for the distribution of UPS Power from the Control Room to Network switches etc in structured way, including necessary cables ELCBs, MCB, Sockets, Switches, Electrical PVC boxes etc. and all other switch gear with necessary accessories and suitable wall mounting powder coated metal bracket for mounting fixed cameras (if necessary) as per the site condition.

Supply and drawing 3 x 1.5 sq.mm size FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed PVC conduit as required. Make: Havells, Finolex or equivalent

PART II- Adhar Based Biometric Attendance System

Supply, Installation, testing and commissioning of STQC Approved Fingerprint, PIN and Smart Card based Time-Attendance Terminal with authentication mode:AADHAR Number/RFID + Finger, Built in PoE, Built in Wi-Fi, IP65 Ratings and Mifare Module support for smart ID card.Communication Port: Ethernet, Wi-Fi, Mobile Broadband and USB port. Rate includes wall mounting braket.Certification required : CE, FCC, BIS and RoHS.Warranty 3 yers Preferred make: Matrix or Equivalent

PART III- Smart ID card

Supply and providing contactless 1K Mifare Smart ID card printed with employee details with lamination and front side colour and rear side monochrome printing, card holder (dual side), Lanyards with 16mm width, 90 cm length with digital printing of Department Name and including all data entry, processing and encoding charges.

ATLANTA COMPUTERS

Adwaita Technology Solutions LLP

BUSINESS INTELLIGENCE GROUP

ELIGHT COMPLETE NETWORKING SOLUTIONS

a dot computers