PUSHKARA MAIN CANAL

Supply of Man Mazdoor (light mazdoor) for maintenance of canal system and water supply for irrigation amount for 1 day(S.No:3 ,CFMS code- LAB-00120,page 8, of Labour Rates of SSR 2025-26)

Providing homogeneous embankment using soil from approved borrow area in layers of 25-30 cm before compaction including cost of all materials ,machinery , labour, all operations such as excavation , sorting out , transportation ,spreading soil in layer of specified thickness , breaking clods, sectioning, watering , compacting etc., complete with initial lead upto 1 km all lifts

Excavation and removal of silt or silt mixed with sand from canal bed in dry condition including disposing off the same in the spoil bank or on the canal embankment in layers as directed etc., complete with initial lead upto 50 M and all lifts etc., (IRR- PMW-3-20) (Distributaries and Main Canal)

Excavation and removal of silt or silt mixed with sand in slussy condition from canal bed including disposing off the same in spoil bank or on the canal embankment in layers as directed etc., complete with initial lead upto 50 m and all liftsIRR-PMW-3-21

Excavation in all kinds of soil including boulders upto 0.3 m diameter for canal, seating of embankment, filter drains / catch water drains etc., including dressing bed and sides to required level and profile, cost of all materials, machinery, labour, placing the excavated soil neatly in dump area or for the formation of service road / embankment as directed etc., complete with initial lead upto 1 km and all lifts.

Laying Sand Bags in the Stipulated places including cost of empty cement bag, sand, thread, stiching charges and labour charges with 13.615 % overhead charges and contractors profits.Vide: S.No:2,Pg.No 36, MAT-00339,of Miscellaneous

Clearing thick jungle growth ( less than 50 percent open space ) including bushes upto 30 cm / parthenium and other weeds including burning or disposing off the same asdirected etc., complete.)

Removal of Water Hyacinth up to 30 cm thick IRR-PMW-3-25(a) IRR-PMW-3-25(a)

Surface cleaning of metal surfaces by chemical cleaners and then by hand and power tool cleaner sand removing dust. After cleaniong, applying primary coat with one coat of Zinc rich epoxy primer to a thickness of 100 microns, followed by finishing coats 2 coats with Coal tar epoxy with material, labour, and all accessories with all leads and lifts.

OT SLUICE SHUTTERS for Below 5 Tons capacity (small gates without rubber Seals) As per Guidelines of Chief Engineer, Central Designs Organization, Hyderabad Specification drawing for Krishna Delta System Fabrication, supply, erection, testing and commissioning of Sluice Shutters consisting of skin plate, horizontal and vertical angles, stiffeners, rubber seals, clamps with all accessories for sluice shutters including cost of all materials, machinery, labour, seal fixing etc., complete as per specifications and approved drawings (without painting on mechanical cleaning surfaces which are added extra as per schedule of rates IRR-GAW-2-14.

Supply, Casting & Mechaning of Cast Iron Heavy Duty Gear box suitable to 75Dia screw rod with Handel made witt solid plate block either 30 or 40mm plate & providing handels with 32dia rods for Pushkara Cross Regulator gates all leads and lifts etc., complete for finished item of work as directed by the engineer-in-charge.

Supply, & Fixing of Thrust Bearing 51230 (SKF/FAG ) for Podalada Lock Chamber Weir gates all leads and lifts etc., complete for finished item of work as directed by the engineer-in-charge.

Hiring of 30KVA generator set for power supply to Core Cutting machine and for on spot welding/ Repairing of Embedded Metal Parts and hoist platform etc., complete for finished item of work as directed by the Engineer-in-Charge.

Hire charges towards Hydraulic Truck Crane 16T including Crew charges, Fuel Charges etc., and all incidental charges for removing & Erection of Flap Shutters.