Rate Contract of Cable Laying and Wiring related jobs for Two (02) years under EMIPH department, SgTPP.

Laying of Cable on wall/surface ( including supply & fixing MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending good damages & painting Up to 2 Core 25 sqmm )

Laying of Cable on wall/surface ( including supply & fixing MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending good damages & painting Up to 3/4 Core 25 sqmm )

Laying of Cable on wall/surface ( including supply & fixing MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending good damages & painting From 3 /3 ½ Core 35 Sqmm to 3 /3 ½ Core 50 Sqmm. )

Laying of Cable on wall/surface ( including supply & fixing MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending good damages & painting Above3 /3 ½ Core 50 Sqmm to 3 /3 ½ Core 90 Sqmm. )

Laying of Cable on wall/surface ( including supply & fixing MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending good damages & painting Above3 /3 ½ Core 90 Sqmm to 3 /3 ½ Core 150 Sqmm. )

Laying of Cable on wall/surface ( including supply & fixing MS saddle with earthing attachment in 10SWG GI wire making holes etc as necessary mending good damages & painting From 3 /3 ½ Core 150 Sqmm to 3 /3 ½ Core 185 Sqmm )

Laying of Cable through existing ( RCC/Hume /GI Pipe,Open masonry Trench/Cable Tray for Single 2,3<(>,,<)>3 ½ & 4 Core up to 50 Sqmm. )

Laying of Cable through existing ( RCC/Hume /GI Pipe,Open masonry Trench/Cable Tray for Single 2,3<(>,,<)>3 ½ & 4 Core Above 50 Sqmm to 400 Sqmm. )

Laying of Control Cable on Cable Tray ( 2 Core to 5 Core upto 4 sq.mm )

Laying of Control Cable on Cable Tray ( above 5 Core 2.5 Sq. mm to 12 Core 2.5 sq. mm )

Supply & Fixing double compression Gland ( 2 Core upto 10 sqmm )

Supply & Fixing double compression Gland ( 2 Core upto 16 sqmm )

Supply & Fixing double compression Gland ( 2 Core upto 35 sqmm )

Supply & Fixing double compression Gland ( 2 Core upto 50 sqmm )

Supply & Fixing double compression Gland ( 3 Core upto 10 sqmm )

Supply & Fixing double compression Gland ( 3 Core upto 16 sqmm )

Supply & Fixing double compression Gland ( 3 Core upto 25 sqmm )

Supply & Fixing double compression Gland ( 3 Core upto 50 sqmm )

Supply & Fixing double compression Gland ( 3 Core upto 70 sqmm )

Supply & Fixing double compression Gland ( 3 Core upto 120 sqmm )

Supply & Fixing double compression Gland ( 3 Core upto 150 sqmm )

Supply & Fixing double compression Gland ( 3 Core upto 185 sqmm )

Supply & Fixing double compression Gland ( 3 Core upto 400 sqmm )

Supply & Fixing double compression Gland ( 4 Core upto 4 sqmm )

Supply & Fixing double compression Gland ( 4 Core upto 6 sqmm )

Supply & Fixing double compression Gland ( 4 Core upto 10 sqmm )

Supply & Fixing double compression Gland ( 4 Core upto 16 sqmm )

Supply & Fixing double compression Gland ( 4 Core upto 25 sqmm )

Supply & Fixing double compression Gland ( 4 Core upto 35 sqmm )

Supply & Fixing double compression Gland ( 3 ½ Core upto 25 sqmm )

Supply & Fixing double compression Gland ( 3 ½ Core upto 70 sqmm )

Supply & Fixing double compression Gland ( 3 ½ Core upto 95,120 sqmm )

Supply & Fixing double compression Gland ( 3 ½ Core upto 150 sqmm )

Supply & Fixing double compression Gland ( 3 ½ Core upto 185 sqmm )

Supply & Fixing double compression Gland ( 4 Core x 2.5 Sqmm )

Supply & Fixing double compression Gland ( 4 Core x 50 Sqmm )

Supply & Fixing double compression Gland ( 6 Core x 4 Sqmm )

Supply & Fixing double compression Gland ( 10,12 Core x 2.5 Sqmm. )

Supply & Fixing double compression Gland ( 10 Core x 4 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointig material upto 2 core 4 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 2 core 10 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 2 core 16 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 2 core 35 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 2 core 50 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 3.5 core 25 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 3.5 core 35 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 3.5 core 50 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 3.5 core 70 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 3.5 core 95 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 3.5 core 120 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 3.5 core 150 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 3.5 core 185 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 4 core 4 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 4 core 6 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 4 core 10 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 4 core 16 Sqmm )

Finishing the cable of each core end by ( crimping method including supply and fixing solder less socket(dowels) ,tape anticorrosive paste & jointing material upto 4 core 25 Sqmm )

Laying of 11kV grade 1Cx630 sq.mm AL ( cable on tray )

Supply & Fixing of lugs for 1Cx630 sq.mm ( AL cable )

Supply & Fixing of Double Compression ( Gland for 1CX630 sq.mm Cable )

Laying of cable up to 11 kV grade ( 3/3.5/4 Core x 185 sq.mm through tussel/tray with necessary protection )

S&F of earth spike for local/building ( earthing )

Fixing of cable ends including supply of ( Aluminium socket and connecting it.(For 1 Core 630 sq. mm 1.1 kV Grade Aluminium Cable) )

Earth Continuity Conductor by Connecting ( the equipments to earth busbar including S & F Stranded GI (Hot Dip) wire of size 7/14 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. )

Equipment earthing by connecting the ( equipment body to earth busbar including S&F 20mm X 3mm galvanized(Hot Dip) MS flate. )

Fixing of 600 mm GI Cable Tray

Laying of Cable through U/G ( upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth ,with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed )

Laying of Cable through U/G ( above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trench with shifted soil, leveling up and restoring surface duly rammed )

Laying of Cable through U/G ( above 300 sqmm and upto 630 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trench with shifted soil, leveling up and restoring surface duly rammed )

Laying of Cable through road ( from 16 sqmm to 95 sqmm in pavement by road boring process . )

Finishing of the PVC insulated wire ends ( by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes upto 2.5 sqmm )

Finishing of the PVC insulated wire ends ( by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes 6 sqmm )

Finishing of the PVC insulated wire ends ( by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes 16 sqmm )

Fixing of call bell/Buzzer on single ( HW board including S&F HW Board )

Fixing only ceiling fan complete set ( including S&F connecting wire for down rod up to 30cm )

Fixing of 60cm exhaust fan

Equipment earthing by connecting the ( equipment body to earth busbar including S&F 50mm X 6mm galvanized(Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc. )

Fixing only pendent light fitting ( complete with lamp, shade and 24/0.2 mm copper wire including S&F pendent holder )

S&F Iron Clad Main Switches 16A, 500V ( TPN & TP on flat iron frame on wall )

S&F Iron Clad Main Switches 32A, 500V ( TPN & TP on flat iron frame on wall )

S&F Iron Clad Main Switches 60/63A, 500V ( TPN with Fuse on L&N on angle iron frame on wall )

S&F Iron Clad Main Switches 100/125/200A ( <(>,<)> 500V TPN with Fuse on L&N on angle iron frame on wall )

Fixing only Mains switch on frame 16/32A ( upto 500V TP & TPN )

Fixing only Mains switch on frame 63/100 ( /125/200A up to 500V TP & TPN )

Wiring with 1.1 KV grade 2x1.5 sqmm wire ( in 19mm conduit including S&F 1Cx14 SWG GI ECC )

Wiring with 1.1 KV grade 2Cx2.5 sqmm ( wire in 19mm conduit including S&F 1Cx14 SWG(2mm dia) GI ECC )

Wiring with 1.1 KV grade 2Cx4 sqmm wire ( in 19mm conduit including S&F 1Cx14 SWG(mm dia) GI ECC )

Wiring in 1.1 KV grade 2Cx2.5 sqmm + ( 1Cx1.5Sqmm stranded copper wire in suitable size of PVC casing-capping including necessary fittings )

S&F of Starter (1 Ph, 25A, Havells ( /Standard/CGL) with sockets )

Fixing only single/twin fluorescent ( light fitting complete with all accessories directly on wall/ceiling/HW round block by screws etc. )

Supply of 3 Pin 250 Volt 15A flush type ( plug socket )

S&F 250V 5A Piano key type switch ( (approved make) )

S&F 250V 15A Piano key type switch ( (approved make) )

S&F 250V 6A 5 Pin moduler type plug ( socket (approved make) without switch and plug top )

S&F 250V 16A 3 Pin moduler type plug ( socket (approved make) without switch and plug top )

S&F 250V 5A 5 Pin flush type plug socket ( (approved make) with switch & without plug top )

S&F 250 V, 5A socket with switch ( including 4”X4” GI sheet box )

Fixing of cable Tray including fixing of ( tray support. )

Supply & fixing of Switch Board 4”x 6”.

Supply & fixing of Switch Board 4”x4”

Supply & fixing of Switch Board 8”x6”.

S&F of 6A 5Pin socket, Anchor Make.

Fixing of junction Box 4”X6”

Fabrication and fixing of angle frame ( with painting for sodium set fitting, junction box fittings etc . )

Supply and fixing of casing capping

Supply & Fixing of ceiling Rose

S&F of Junction Box (4”X6”)

RM ENGINEERING (BID ID -6094559)

P C JOSEPH ENGINEERING AND CONTRACTOR (BID ID -6079729)

RANGAMATI ENTERPRISE (BID ID -6059839)